11ac01f0e8
Set low latency mode during initialization #249
...
This appears to fix the initialization getting stuck sometimes, e.g.
after turning on bluetooth and then connecting.
The band incidentally sends 0x8 when it's stuck (won't accept the UUID_PAIR
request).
2016-03-23 22:50:42 +01:00
b0ec74696d
Give better feedback when a firmware cannot be installed #234
2016-03-22 16:12:27 +01:00
424d9cd142
More work on firmware detection, recognition and validation #234
...
Should be as robust as possible now.
2016-03-21 23:42:34 +01:00
275839a7f4
last arg of copyOfRange() is index, not length!
2016-03-21 04:18:45 +01:00
f7b71c1f96
Add logging to firmware detection #234
2016-03-21 04:17:12 +01:00
4be1926459
reformat code though Android Studio
2016-03-20 15:00:05 +01:00
b3410dcebe
Improved testcase #234
2016-03-20 12:18:43 +01:00
4f956000c5
Enhanced support for firmware detection, recognition and upgrade #234
...
Also supports double firmware upgrade for Mi1S.
- so far, only hr firmware upgrade is tested for 1S
- adds junit testcases for firmware recognition and handling
2016-03-20 01:07:57 +01:00
6d8d6d5bc8
Testcases for firmware checking
2016-03-20 01:07:57 +01:00
c5a887192d
Remove/revert some temporary test code
2016-03-16 00:27:32 +01:00
e26e6d7b24
Display HR firmware version
...
Hide fw,hw,hr versions by default and show them on demand with an info
button.
2016-03-16 00:27:32 +01:00
91f02ae920
WIP: Lots of work towards double firmware update for Mi 1S #234
2016-03-16 00:27:08 +01:00
a89fea9c7d
Pebble: Fix crash when starting pebstyle
...
Also make code for "push" handlers more generic
2016-03-08 12:02:00 +01:00
88982a6174
Merge pull request #235 from Freeyourgadget/feature-configuration
...
Use external browser for configuring pebble apps
2016-03-08 10:41:46 +01:00
5eb8f57b4c
Some more byte -> int conversions
2016-03-07 22:47:34 +01:00
be012eca8d
For Mi Band 1A (fw 5.15.7.14) we get 0xa for auth success #180
2016-03-07 21:43:45 +01:00
50dd7f5eba
Better check for heartrate support on non-heartrate devices
2016-03-07 21:36:31 +01:00
3920b3f977
Do not override the configured settings with our old stored values (but keep them around)
2016-03-04 17:43:43 +01:00
bd7b34985b
reformat code and optimize imports
2016-03-03 15:47:00 +01:00
2a7f9226a0
Pebble: send configuration to watch
...
TODO: handle booleans
2016-03-03 14:23:17 +01:00
63d938559e
pass GBDevice down to ExternalPebbleJSActivity to determine the platform version (aplite,basalt,chalk)
2016-03-03 11:52:30 +01:00
fc464d112d
change some more short and byte to int regarding Morpheuz
2016-02-29 23:13:07 +01:00
cbe73f71a1
Fix some typos (thanks!) #178
2016-02-29 22:08:34 +01:00
ed85fd5011
convert byte and short values related to activity tracking to int
...
This avoids a lot of problems because java
- does not know unsigned values
- jvm and dalvic do not internally support byte and short
- sqlite does not know them either
2016-02-29 20:54:39 +01:00
ddde25e5df
Initial firmware update support for Mi1S #234
2016-02-28 02:46:48 +01:00
d7822d07a6
Show the measured heart rate as a Toast, for now #178
2016-02-27 23:27:15 +01:00
3ff31cd73b
Disable heartrate in charts fow now, fix notification for manual hr
2016-02-27 23:18:44 +01:00
ac8d7bee5f
Only do heart rate stuff when supported #178
2016-02-27 11:23:55 +01:00
de6f898fef
Some more fixes regarding heart rate measurement #178
2016-02-27 11:18:16 +01:00
9e636d66f6
Initial heart rate support by KashaMalaga #178
...
(removed unrelated Android M fixes and squashed commits)
2016-02-27 00:05:06 +01:00
0ef738067d
Some work in progress for heart rate graphs #178
...
Currently we get the heart rate when synchronizing activity data
(i.e. not live) and we write it to the activity database so that we
can show a nice graph. The value is currently always 0 though,
because we can't enable recording hr, yet.
2016-02-26 23:45:17 +01:00
df741e9571
Install app on watch directly instead of telling the user to do so.
2016-02-26 15:29:26 +01:00
0b568df8de
Extra byte indeed appears to be heartrate value #205
2016-02-26 00:04:33 +01:00
095ef56c14
Initial support for activity data sync with Mi 1S #205
...
Looks like the activity type is somehow wrong though, or I'm sleeping
all day ;-)
2016-02-25 23:52:34 +01:00
c86365ee2e
Some more Mi Band pairing improvements #180
...
- listen to notifications early -- the band then actually tells us that
authentication is required
- check for this after sending user info
- add authentication states to GBDevice
- workaround for event problems in pairing activity (delivered although
already unregistered)
- BtLEQueue now deals with gatt events coming *before* connectGatt()
actually returned (namely the connection event)
2016-02-13 00:15:16 +01:00
8294921de7
Do not ack the sleep data until we can actually store them
...
Added helper method to fetch the latest timestamp stored in the DB, needed for the aforementioned feature.
Update changelog
This closes #188 \o/
2016-02-11 19:14:40 +01:00
7436778700
Pebble: fix for recent morpheuz versions (maybe breaks old versions)
2016-02-11 12:49:01 +01:00
20c4e49fe1
Refactoring of the Pebble Health steps data receiver.
...
Added logic to deal with pebble health sleep data.
Added database helper to change the type of a range of samples (needed for sleep data).
Fixes to the Pebble Health sample provider.
2016-02-09 17:52:21 +01:00
d62946df63
Pebble: some minor code cleanups regarding health
2016-02-09 01:31:41 +01:00
93db073538
Pebble: try to fix health code, might be broken, cant test
2016-02-09 00:56:16 +01:00
12a5b53f00
Pebble: Merge DatalogHandler and DataLog session
...
Also:
- pass the length of the payload and not of the whole datalog buffer to handleMessage(), simplifying DatalogSessionHealth::handleMessage()
2016-02-09 00:49:42 +01:00
b01a517813
Pebble: fix hexdump for health datalog
2016-02-08 23:33:05 +01:00
0c4e606e74
Pebble: rename BLOBDB_HEALTH to BLOBDB_PREFERENCES and encodeSaneDistanceUnit to encodeSetSaneDistanceUnit
...
Also allow to set insane units in the method
2016-02-07 21:59:14 +01:00
10b5c571bb
Use Kilometers as distance unit
2016-02-07 16:44:16 +01:00
2f8207abf9
Initial support for reading pebble health steps/activity data.
2016-02-07 09:27:51 +01:00
03ad7f5a24
Do not enable insights on the watch. Add notice about health activation to changelog.
2016-02-06 21:38:55 +01:00
59d6553c54
Pebble: fix stupid bug that broke active reconnection
2016-02-06 19:35:49 +01:00
85bad9abf5
Pebble: store information about datalog sessions (uuid, item type, length, tag)
...
... and log them if data comes in from a known id.
Also request open sessions on connect.
And last but not least hex dump data which might be from Health (the tags that I never see on Aplite but always on Basalt)
2016-02-03 23:27:35 +01:00
493fcfc853
Pebble: improve datalog output
2016-02-03 20:23:56 +01:00
baf5eee72f
Refactored the User Activity-tracking related preferences.
...
Created a new device-independent class ActivityUser to hold the data
Moved the constants from the miband constant class to the ActivityUser class
Removed the miband-specific in favor of common-prefixed preferences (with upgrade support for legacy values)
Changed the way the gender is stored to an integer value
Removed the hardcoded default values for user data in favor of static fields of the ActivityUser class
2016-02-02 17:33:24 +01:00
5b016e2577
WIP, read the miband user information for the time being.
2016-01-29 17:45:35 +01:00
9f2a7f5448
actual deletetion of the Health app.
...
It brings the health watchapp back to the pristine state "you need pebble health in order to use this app". The data, however, is not deleted!
2016-01-28 11:59:23 +01:00
33cf76172b
Pebble: add hack to enable and maybe disable Health from the App Manager activity
2016-01-27 23:02:09 +01:00
666c53a1e4
Pebble: make encodeBlobDB accept Strings and UUIDS as keys, use it for Heath activation
2016-01-26 10:48:50 +01:00
7ba3a874a2
Message to activate Pebble Health, possibly.
2016-01-25 23:15:19 +01:00
a72373c17c
move PebbleContentProvider.java
2016-01-22 20:38:44 +01:00
b9c1332442
Testing content provdider
2016-01-22 20:21:18 +01:00
0b53f60b0d
Pebble: EXPERIMENTAL support for replying to wearable notifications
...
Tested with Signal, more could work.
2016-01-09 17:54:17 +01:00
46bbab7df0
rename IDSenderLookup to LimitedQueue and store Object instead of String
2016-01-09 16:07:22 +01:00
ae5417b9cc
Avoid NPEs when aborting an erroneous sync #205
2016-01-07 00:33:20 +01:00
50cd5b2629
Pebble: Fix regression which freezes Gadgetbridge when disconnecting via long-press menu
2016-01-02 00:30:11 +01:00
d358ed81d2
Pebble: Display a failure if we cannot map a notification id back to a Phone number when replying to an SMS
2015-12-31 01:43:00 +01:00
890016d652
Pebble: Fix crash when turning off bluetooth when connected on Android 6.0
2015-12-31 01:13:48 +01:00
1cbe965802
Add analog+digital settings
2015-12-29 10:45:14 +01:00
f9122bc674
send the calendar events each time the time is sent to miband, until we have a common strategy (e.g. EventHandler).
2015-12-29 10:01:32 +01:00
1d9e1d7caf
Fix possible race condition when availableSlots == 3
...
(There are two difficult things...)
2015-12-29 09:18:02 +01:00
e3d0c63676
fix PebStyle color
2015-12-27 21:39:46 +01:00
2caef02309
fix typo :/
2015-12-27 19:16:56 +01:00
11e02fbf5f
Pebble: add experimental reconnect support for standby-mode on firmware 3.x
...
- You should also set reconnect attempts to 0 in preferences when using this.
- It also works when you set flight mode on the pebble, then wait for about 5 minutes and turn BT back on
- Pebble FW 2.x support ist completely untested.
2015-12-27 19:11:40 +01:00
3ee418a45b
Implement pushing messages upon watchapp start.
...
This watchface is used as example: https://github.com/ygalanter/PebStyle because it doesn't initiate a connection like others do.
At the moment this is more a proof of concept^W^W^Wdirty hack then anything else.
2015-12-23 14:22:28 +01:00
5f189aedbd
Add support for some configuration options of TimeStylePebble watchface ( https://github.com/freakified/TimeStylePebble )
2015-12-23 09:04:01 +01:00
87739d94db
Pebble: unify FW 2.x and 3.x action decoding
2015-12-20 21:23:39 +01:00
a71c27d25e
Added subtitle to timeline pins
2015-12-20 19:50:48 +01:00
96e21dbf21
Pebble: fix "[Action]" being displayed as SMS action when no canned replies are defined
2015-12-20 00:58:14 +01:00
35c7ab6dde
PEbble: add database parameter to encodeBlobDBClear(), minor cleanups
2015-12-20 00:40:38 +01:00
5026cf269f
Added command to clear the DB on pebble.
2015-12-19 20:52:44 +01:00
4b29d63d4e
Pebble: more debugging
2015-12-19 20:30:46 +01:00
9fb2e1620e
Rename misnamed file.
2015-12-19 14:36:28 +01:00
6582ead01c
Add pebble health uuid.
2015-12-19 09:43:55 +01:00
7eabf1e603
spoof android app version to 3.8.1 (was 3.0.1)
2015-12-18 21:34:52 +01:00
89ef950c62
Add the feature to changelog.
...
Fix max index for alarms on miband.
2015-12-18 20:30:09 +01:00
5fb8c7bed8
Use the right column for sorting upcoming events.
...
Plus add forgotten getQueue
2015-12-18 18:49:29 +01:00
47a34bb7bf
Pebble: debug output for blobdb responses (get rid of unhandled endpoint -20005 messages)
2015-12-18 12:41:01 +01:00
c9dcf06529
Pebble: improve debug output
...
- decode apprunstate and systemmessage endpoint messages
- prevent error messages by not using appmanager endpoint on firmware 3.x (it is gone)
2015-12-17 23:09:52 +01:00
036e92ee64
Implement sending the upcoming events to the miband.
...
The reserved alarm slots are used for storing the upcoming events.
The method is not yet called anywhere.
2015-12-17 18:02:21 +01:00
f387f7c96b
increase canned replies from 8 to 16
...
NOTE:
Total allowed bytes for all replies = 512 - (reply count - 1)
TODO:
- check with Firmware 2.9.1
- remove last reply that exceeds the 512 bytes limit completly (else it will be partly truncated)
2015-12-17 00:05:42 +01:00
dfa85745e8
Send out SMS when replying with a canned response
...
Closes #121
2015-12-15 00:26:06 +01:00
de5f30ae97
WIP: Work towards SMS replies / canned replies, round 3
...
- put random id/phone number pair into limited lookup list (last 16 sms messages) when sms arrives
- lookup the phone number when replying from the a device
THIS STILL DOES NOT DO ANYTHING USEFUL
2015-12-14 23:31:31 +01:00
14f8929439
Pebble: fix decoding strings in appmessages from the pebble
...
This fixes sending SMS from "Dialer for Pebble"
2015-12-14 00:05:14 +01:00
e5cf22bda6
WIP: Work towards SMS replies / canned replies, round 2
...
- parse the reply string in PebbleProtocol
- put replies into GBDeviceEvents
- display a toast in AbstractDeviceSupport, containing the reply
THIS STILL DOES NOT DO ANYTHING USEFUL
2015-12-13 22:43:53 +01:00
53fb63781e
WIP: Work towards SMS replies / canned replies
...
- Implement the PebbleProtocol side (2.x and 3.x)
- Add Preferences for canned replies
This can be tested by enabling untested features in Pebble Settings
It lets you see and select the replies set up in "Canned Repies" on the Pebble
You will get a "NOT IMPLENTED" message on your Pebble.
THIS DOES NOT ACTUALLY DO ANYTHING USEFUL YET.
2015-12-13 12:03:57 +01:00
854a7ee1ac
Avoid NPE when DeviceInfo is null
...
(when a notification comes in while we're connected, but not initialized yet)
2015-12-09 17:55:46 +01:00
794ae6d800
Well, we better return something usefull instead of just false :-]
...
Please try again #178
2015-12-09 17:54:54 +01:00
18726eca33
Pebble: Correct setting the timezone on firmware 3.x (pebble expects the "ID" eg. Europe/Berlin)
2015-12-08 14:59:24 +01:00
3ac00a004f
Pebble: Support installing .pbl (language files) on firmware 3.x
2015-12-08 12:07:14 +01:00
f20e11d517
Pebble: Increase maximum notification body length from 255 to 512 bytes on firmware 3.x
2015-12-07 12:25:34 +01:00
365ce61cb6
Support for firmware upgrade/downgrade on Mi 1A.
...
I hope I didn't break firmware upgrades on some Mi 1 models
other than mine (my hardware revision is 2).
Upgrades for Mi 1S are currently disabled, we need some brave
souls who can help us test this.
Closes #173
Also see: #169
2015-12-07 01:14:06 +01:00
6b053c4240
Make method protected, for future use
2015-12-07 01:13:47 +01:00
aa60ce4b56
Disable some notifications also for update-firmware operation
...
(introduce a common superclass to do that)
2015-12-07 01:13:47 +01:00
8cd6bf09a4
Fix NPE when an error occurs during activity synchronization
...
(activityDataStruct is null after handleActivityFetchFinish())
Also remove superfluous log statement -- toasts are logged as well.
2015-12-07 01:13:47 +01:00
b05cfc6aac
Pebble: fix crash on firmware 3.x when pebble requests a pbw that is not in Gadgetbridge's cache
2015-12-06 17:56:46 +01:00
bd0716ba58
Some more lint warnings fixed
2015-11-23 23:04:46 +01:00
81c2f657bd
Some lint fixes
2015-11-23 22:46:12 +01:00
a53f1c21eb
Simplification
2015-11-23 21:39:08 +01:00
1734e58f70
Pebble: Initial try to interpret sleep
2015-11-15 10:30:28 +01:00
952a383856
Use batched database commits for Mi Band activity samples
2015-11-01 21:41:36 +01:00
d4f070f0aa
Simplify external dir handling again -- prefer the primary dir
...
The primary external dir is often a user-partition on the internal
storage medium. This one is safe in multi-user environments.
The "removable storage" (sdcard) on the other hand can be read by
everyone. If the former is not available or not writable, use the
latter.
closes #153
2015-11-01 20:49:50 +01:00
54c316778b
Add exception to GB.toast() to get it logged
2015-10-25 00:13:32 +02:00
f287c04ad9
Pebble: simplify Misfit data parsing, since all assumptions seem to be wrong :/
2015-10-24 11:12:40 +09:00
e809c490dc
add method for batch inserts in ActivityDatabaseHandler. Closes #150
2015-10-23 22:13:12 +09:00
4aff3c8e8e
Pebble: try to improve Misfit steps parsing. Should be really close now.
2015-10-22 23:56:45 +09:00
c350f04fa9
Make "Locate device" work with newer firmware and MI1A. ( #136 )
...
Separate the different notification logic into distinct strategy classes.
2015-10-22 00:53:27 +02:00
44a36a5f1d
Pebble: First try to receive at least steps from the Misfit pebble watchapp
2015-10-21 23:11:59 +09:00
aa5749cd40
Some improvements to live activity.
...
Still rather inaccurate due to missing timing information.
2015-10-21 00:36:18 +02:00
4096e50681
Merge pull request #146 from sarg/master
...
Fix DeviceInfo checksum function.
2015-10-19 20:56:49 +02:00
cee03debbb
- add code to send the confirmation of the activity data transfer after a timeout.
...
==> This is currently commented out because it was done to solve #141 but while doing this #143 popped out.
- send a stop_sync message to the band if the data doesn't fit the buffer. This way the data remains on the band.
2015-10-19 16:17:03 +02:00
94cbf2f301
Fix DeviceInfo checksum function.
2015-10-19 15:02:56 +03:00
4e0fed8857
Improvements to how and when alarms are sent to the device
...
They are now sent whenever the Alarms activity is finished.
Display "All alarms disabled" when no alarm is enabled.
Unrelated: pass exceptions to GB.toast() where applicable.
2015-10-18 23:52:59 +02:00
ef15bf8ce8
Prevent firmware update for Mi Band 1A for now #136
2015-10-18 22:57:04 +02:00
dcd776e09a
Attempt to fix never finishing activity data fetching #142
...
(by disabling unrelated notifications)
2015-10-18 22:27:52 +02:00
7a44ea9596
Small comment
2015-10-18 21:33:07 +02:00
d57c6166b9
Fix pairing with MI1A
2015-10-18 21:54:22 +03:00
cd7acf6572
Pebble: Do not reboot after language file installation (does not seem to be necessary)
...
NOTE: This still does not work since crc calculation is missing
2015-10-07 00:44:29 +09:00
5860c4f4f9
Pebble: WIP support for flashing language files (.pbl)
...
NOTES:
- YOU SHOULD NOT TRY THIS YET ;)
- This was only tested with the unoffical japansese language pack
- Problably needs proper crc calculation (I just hardcoded the one for the japanese language pack)
2015-10-06 23:56:01 +09:00
d21b5e68b5
Pebble: Cleanup AppMessage handlers
2015-10-04 22:53:11 +09:00
321c0ff125
Log when we get bogus timestamps #91
2015-10-03 23:42:22 +02:00
586d959055
Merge branch 'master' into live-activity-data
2015-10-02 23:49:03 +02:00
baa2d0b27a
Displaying live activity data works well enough
2015-10-02 23:38:07 +02:00
d14ccf1c5c
Get device name from the BLE Standard Characteristic.
...
Always log read and notify characteristics, even if unhandled.
Changed Log statements for write action to make them clearer.
2015-09-28 16:47:43 +02:00
18f952250a
First working code for vibrations on firmware version 1.0.10.14
2015-09-28 12:53:42 +02:00
4250a002b4
Merge branch 'master' into live-activity-data
2015-09-27 00:16:04 +02:00
e3533a2b18
Pebble: Allow muting (blacklisting) Apps from within generic notifications on the watch
...
Closes #113
2015-09-25 00:53:40 +02:00
1d41f2f8e4
Refactoring
...
The notfification APIs now use NotificationSpec as their only parameter, which
contains all information (required and optional ones).
We no longer have separate methods and actions for SMS/EMAIL/GENERIC anymore.
The type of notification is important now, not how we received them technically.
2015-09-24 14:45:21 +02:00
e1ea8270ca
Add a progress notification for the activity data transfer.
2015-09-24 14:03:01 +02:00
5578691321
Fix progress bar
2015-09-24 14:02:33 +02:00
ab78d167d9
update CHANGELOG.md
2015-09-23 23:53:16 +02:00
3bb673d33a
Pebble Time Round support ("chalk" platform)
2015-09-23 23:20:49 +02:00
d9b4bbe550
Move activity data and progress manipulation into dedicated methods
...
I did this in trying to understand the code better and to easier allow
for error handling/transaction rollback to be added.
2015-09-23 23:16:42 +02:00
3852fcd756
Reuse MiBandDateConverter
2015-09-23 23:16:42 +02:00
f6ef72e9fb
Pebble: fix some hardware revision strings to match strings in firmware json file
...
This should enable firmware upgrade on Pebble Time and might fix pbw installation on Pebble Time Steel
2015-09-20 18:27:41 +02:00
60b24e004a
Pebble: Fix bug for Pebble Intent Notifications not arriving on FW 2.x
2015-09-19 21:35:02 +02:00
0c4dbf75e0
Pebble: fix for PebbleKit AppMessages containing non-latin characters
2015-09-19 15:32:09 +02:00
e1b02e1be4
Pebble: add option for PebbleKit support (default is disabled)
...
Also fix an endless loop when number of reconnects is set to 0
2015-09-19 12:49:34 +02:00
e6a8a1a36c
Pebble: Better support for 8 and 16 bit integers in AppMessages
2015-09-18 00:03:34 +02:00
041bd1a7f4
Treat Conversations messagess as chat messages, even if arrived via Pebble Intents (which is the default)
2015-09-17 23:08:05 +02:00
a5ef952e37
Pebble: Implement WIP outbound communication with PebbleKit Android Apps
...
This improves #106
Pebblebike aka Ventoo works to some extent sometimes now ;)
2015-09-17 19:21:22 +02:00
b73ff49681
Use data type constant instead of hardcoded value
2015-09-17 16:56:23 +02:00
58bbcb0035
Pebble: allow to configure reconnect attempts
...
This should help #89
2015-09-17 15:31:12 +02:00
21d59b23c1
Allow QKSMS notifications to be handled as a generic notification if SMS notification mode is set to "never"
...
This makes it possible to use the "Open on Phone" and individial dismiss feature with QKSMS.
2015-09-13 22:51:05 +02:00
95e22a4e32
Pebble: Allow stopping apps though PebbleKit messages (also in the API)
2015-09-13 21:44:26 +02:00
cpfeiffer