###Changelog ####Version 0.7.4 (next) * Refactored the settings activity: User details are now generic instead of miband specific. Old settings are preserved. * Pebble: Fix regression with broken active reconnect since 0.7.0 ####Version 0.7.3 * Pebble: Report connection state to PebbleKit companion apps via content provider. NOTE: Makes Gadgetbridge mutual exclusive with the original Pebble app. * Ignore generic notification when from SMSSecure when SMS Notifications are on ####Version 0.7.2 * Pebble: Allow replying to generic notifications that contain a wearable reply action (tested with Signal) * Pebble: Support seting up a common suffix for canned replies (defaults to " (canned reply)") * Mi Band: Avoid NPEs when aborting an erroneous sync #205 * Mi Band: Fix discovery of Mi Band 1S * Add a confirmation dialog when performing a db import * Sort blacklist by package names ####Version 0.7.1 * Pebble: allow reinstallation of apps in pbw-cache from App Manager (long press menu) * Pebble: Fix regression which freezes Gadgetbridge when disconnecting via long-press menu ####Version 0.7.0 * Read upcoming events (up to 7 days in the future). Requires READ_CALENDAR permission * Fix double SMS on Sony Android and Android 6.0 * Pebble: Support replying to SMS form the watch (canned replies) * Pebble: Allow installing apps compiled with SDK 2.x also on the basalt platform (Time, Time Steel) * Pebble: Fix decoding strings in appmessages from the pebble (fixes sending SMS from "Dialer for Pebble") * Pebble: Support incoming reconnections when device returns from "Airplane Mode" or "Stand-By Mode" * Pebble: Fix crash when turning off bluetooth when connected on Android 6.0 * Mi Band: reserve some alarm slots for alerting when upcoming events begin. NB: the band will vibrate at the start time of the event, android reminders are ignored * Mi Band: Display unique devices Names, not just "MI" * Some new and updated icons ####Version 0.6.9 * Pebble: Store app details in pbw-cache and display them in app manager on firmware 3.x * Pebble: Increase maximum notification body length from 255 to 512 bytes on firmware 3.x * Pebble: Support installing .pbl (language files) on firmware 3.x * Pebble: Correct setting the timezone on firmware 3.x (pebble expects the "ID" eg. Europe/Berlin) * Pebble: Show correct icon for activity tracker and watchfaces in app installer (language and fw icons still missing) * Pebble: Fix crash when trying to install files though a file manager which are located inside the pbw-cache on firmware 3.x * Support for deleting all activity data (in the 'Debug' screen) * Don't pop up the virtual keyboard when entering the Debug screen * Remove all pending notifications on quit * Mi Band: KitKat: hopefully fixed showing the progress bar during activity data synchronization (#155) * Mi Band 1S: hopefully fixed connection errors (#178) Notifications probably do not work yet, though ####Version 0.6.8 * Mi Band: support for Firmware upgrade/downgrade on Mi Band 1A (white LEDs, no heartrate sensor) * Pebble: fix regression in 0.6.7 when installing pbw/pbz files from content providers (eg. download manager) * Pebble: fix installation of pbw files on firmware 3.x when using content providers (eg. download manager) * Pebble: fix crash on firmware 3.x when pebble requests a pbw that is not in Gadgetbridge's cache + Treat Signal notifications as chat notifications * Fix crash when contacts cannot be read on Android 6.0 (non-granted pemissions) ####Version 0.6.7 * Pebble: Allow installation of 3.x apps on OG Pebble (FW will be released soon) * Fix crashes on startup when logging is enabled or when entering the app manager on some phones + Fix Pebble being detected as MI when unpaired and autoconnect is enabled * Fix Crash when not having K9 Mail permissions (happens when installing K9 after Gadgetbridge) (#175) ####Version 0.6.6 * Mi Band: Huge performance improvement fetching activity data * Mi Band: attempt at fixing connection problems (#156) * Pebble: Try to interpret sleep data from Misfit data * Fix exporting the activity database on devices with read-only external storage (#153) * Fix totally wrong sleep time in the sleep chart ####Version 0.6.5 * Mi Band: Support "Locate Device" with Mi Band 1A (and Mi Band 1 with new firmware) * Pebble: Support syncing steps from Misfit (untested features must be turned on to see them), intensity=steps, no sleep support yet * Disable activity fetching when not supported * Small improvements to live activity charts ####Version 0.6.4 * Support pull down to synchronize activity data (#138) * Display tabs in the Charts activity (#139) * Mi Band: initial support for Mi Band 1a (the one with white LEDs) (thanks @sarg) (#136) * Mi Band: Attempt at fixing problem with never finishing activity data fetching (#141, #142) * Register/unregister BroadcastReceivers instead of enabling/disabling them with PackageManager (#134) (should fix disconnection because the service is being killed) ####Version 0.6.3 * Pebble: support installation of language files (.pbl) on FW 2.x * Try to prevent service being killed by disallowing backups ####Version 0.6.2 * Mi Band: support firmare versione 1.0.10.14 (and onwards?) vibration * Mi Band: get device name from official BT SIG endpoint * Mi Band: initial support for displaying live activity data, screen stays on ####Version 0.6.1 * Pebble: Allow muting (blacklisting) Apps from within generic notifications on the watch * Pebble: Detect all known Pebble Versions including new "chalk" platform (Pebble Time Round) * Option to ignore phone calls (useful for Pebble Dialer) * Mi Band: Added progressbar for activity data transfer and fixes for firmware transfer progressbar * Bugfix for app blacklist (some checkboxes where wrongly drawn as checked) ####Version 0.6.0 * Pebble: WIP implementantion of PebbleKit Intents to make some 3rd party Android apps work with the Pebble (eg. Ventoo) * Pebble: Option to set reconnection attempts in settings (one attempt usually takes about 5 seconds) * Support contolling all audio players that react to media buttons (can be chosen in settings) * Treat SMS as generic notification if set to "never" (can be blacklisted there also if desired) * Treat Conversations messagess as chat messages, even if arrived via Pebble Intents (nice icon for Pebble FW 3.x) * Allow opening firmware / app files from the download manager "app" (technically a content provider) * Mi Band: whitelisted a few firmware versions ####Version 0.5.4 * Mi Band: allow the transfer of activity data without clearing MiBand's memory * Pebble: for generic notifications use generic icon instead of SMS icons on FW 3.x (thanks @roidelapluie) * Pebble: use different icons and background colors for specific groups of applications (chat, mail, etc) (thanks @roidelapluie) * In settings, support blacklisting apps for generic notifications ####Version 0.5.3 * Pebble: For generic notifications, support dismissing individual notifications and "Open on Phone" feature (OG & PT) * Pebble: Allow to treat K9 notifications as generic notifications (if notification mode is set to never) * Ignore QKSMS notifications to avoid double notification for incoming SMS * Improved UI of Firmware/App installer * Device state again visible on lockscreen * Date display and navigation now working properly for all charts ####Version 0.5.2 * Pebble: support "dismiss all" action also on Pebble Time/FW 3.x notifications * Mi Band: show a notification when the battery is below 10% * Graphs are now using the same theme as the rest of the application * Graphs now show when the device was not worn by the user (for devices that send this information) * Remove unused settings option in charts view * Build target is now Android SDK 23 (Marshmellow) ####Version 0.5.1 * Pebble: support taking screenshot from Pebble Time * Fix broken "find lost device" which was broken in 0.5.0 ####Version 0.5.0 * Mi Band: fix setting wear location * Pebble: experimental watchapp installation support for FW 3.x/Pebble Time * Pebble: support Pebble emulator via TCP connection (needs rebuild with INTERNET permission) * Pebble: use SMS/EMAIL icons for FW 3.x/Pebble Time * Pebble: do not throttle notifications * Support going forward/backwards in time in the activity charts * Various small bugfixes to the App/Fw Installation Activity ####Version 0.4.6 * Mi Band: Fixed negative number of steps displayed (#91) * Mi Band: fixed (re-) connection problems after band getting disconnected * Pebble: new option to enable untested code (enable only if you like bad surprises) * Pebble: always enable 2.x notifications with "dismiss all" action on FW 2.x (except for K9) * Fixed slight steps graph distortion through black text labels * Fixed control center activity and notification showing different device connection state * Small firmware installation improvements * Various refactorings and code cleanups ####Version 0.4.5 * Enhancement to activity graphs: new graph showing the number of steps done today and in the last week * New preference to set the desired fitness goal (number of steps to walk in one day) * Mi Band: support for setting the fitness goal (the band will show the progress to the goal with the leds and vibrates when the goal is reached) * Mi Band: send the wear location (left / right hand) to the device * Mi Band: support for flashing firmware from .fw files (upgrades and downgrades are possible) * Fixed crash when synchronizing activity data in the graphs activity and changing device orientation ####Version 0.4.4 * Set GadgetBridge notification visibility to public, to show the connection status on the lockscreen * Support for backup up and restoring of the activity database (via Debug activity) * Support for graceful upgrades and downgrades, keeping your activity database intact * Enhancement to activity graphs: new graphs for sleep data (only last night) accessible swiping right from the main graph * Enhancement to graphs activity: it is now possible to fetch the activity data directly from this activity * Pebble: experimental support for dismissing (all) notifications via actionable notifications (disabled by default) * Pebble: make FW 3.x notifications available by default * Mi Band: Set the graphs activity as the default action available with a single tap on the connected device ####Version 0.4.3 * Mi Band: Support for setting alarms * Mi Band: Bugfix for activity data synchronization ####Version 0.4.2 * Material style for Lollipop * Support for finding a lost device (vibrate until cancelled) * Mi Band: Support for vibration profiles, configurable for notifications * Pebble: Support taking screenshots from the device context menu (Pebble Time not supported yet) ####Version 0.4.1 * New icons, thanks xphnx! * Improvements to Sleep Monitor charts * Pebble: use new Sleep Monitor for Morpheuz (previously Mi Band only) * Pebble: experimental support for FW 3.x notification protocol * Pebble: dev option to force latest notification protocol ####Version 0.4.0 * Pebble: Initial Morpheuz protocol support for getting sleep data * Pebble: Support launching of watchapps though the AppManager Activity * Pebble: Support CM 12.1 default music app (Eleven) * Pebble: Fix firmware installation when all 8 app slots are in use * Pebble: Fix firmware installation when Pebble is in recovery mode * Pebble: Fix error when reinstalling apps, useful for upgrading/downgrading * Mi Band: Make vibration count configurable for different kinds of Notifications * Mi Band: Initial support for fetching activity data * Support rebooting Mi Band/Pebble through the Debug Activity * Add highly experimental sleep monitor (accessible via long press on a device) * Fix Debug activity (SMS and E-Mail buttons were broken) * Add Turkish translation contributed by Tarik Sekmen ####Version 0.3.5 * Add discovery and pairing Activity for Pebble and Mi Band * Listen for Pebble Message Intents and forward notifications (used by Conversations) * Make strings translatable and add German, Italian, Russian, Spanish and Korean translations * Mi Band: Display battery status ####Version 0.3.4 * Pebble: Huge speedup for app/firmware installation. * Pebble: Use a separate notification with progress bar for installation procedure * Pebble: Bugfix for being stuck while waiting for a slot, when none is available * Mi Band: Display connection status in notification (previously Pebble only) ####Version 0.3.3 * Pebble: Try to reduce battery usage by acknowledging datalog packets * Mi Band: Set current time on the device (thanks to PR by @danielegobbetti) * More robust connection state handling and display ####Version 0.3.2 * Mi Band: Fix for notifications only working after manual connection * Mi Band: Display firmware version * Pebble: Display hardware revision * Pebble: Check if firmware is compatible before allowing installation ####Version 0.3.1 * Mi Band: Fix for notifications only working in Debug ####Version 0.3.0 * Mi Band: Initial support (see README.md) * Pebble: Firmware installation (USE AT YOUR OWN RISK) * Pebble: Fix installation problems with certain .pbw files * Pebble: Volume control * Add icon for activity tracker apps (icon by xphnx) * Let the application quit when in reconnecting state ####Version 0.2.0 * Experimental pbw installation support (watchfaces/apps) * New icons for device and app lists * Fix for device list not refreshing when bluetooth gets turned on * Filter out annoying low battery notifications * Fix for crash on some devices when creating a debug notification * Lots of internal changes preparing multi device support ####Version 0.1.5 * Fix for DST (summer time) * Option to sync time on connect (enabled by default) * Opening .pbw files with Gadgetbridge prints some package information (This was not meant to be released yet, but the DST fix made a new release necessary) ####Version 0.1.4 * New AppManager shows installed Apps/Watchfaces (removal possible via context menu) * Allow back navigation in ActionBar (Debug and AppMananger Activities) * Make sure Intent broadcasts do not leave Gadgetbridge * Show hint in the Main Activity (tap to connect etc) ####Version 0.1.3 * Remove the connect button, list all supported devices and connect on tap instead * Display connection status and firmware of connected devices in the device list * Remove quit button from the service notification, put a quit item in the context menu instead ####Version 0.1.2 * Added option to start Gadgetbridge and connect automatically when bluetooth is turned on * stop service if bluetooth is turned off * try to reconnect if connection was lost ####Version 0.1.1 * Fixed various bugs regarding K-9 Mail notifications. * "Generic notification support" in Setting now opens Androids "Notification access" dialog. ####Version 0.1.0 * Initial release