Non Session Management API

Jonathan Moore Liles <male@tuxfamily.org>
August 1, 2010
Version 1.1
logo

Table Of Contents


1. Non Session Management API

The Non Session Management API is used by the various components of the Non audio production suite to allow any number of independent programs to be managed together as part of a logical session (i.e. a song). Thus, operations such as loading and saving are synchronized.

The API comprises a simple Open Sound Control (OSC) based protocol, along with some behavioral guidelines, which can easily be implemented by various applications.

The Non project contains an program called nsmd which is an implementation of the server side of the NSM API. nsmd is controlled by the non-session-manager GUI. However, the same server-side API can also be implemented by other session managers (such as LADISH), although consistency and robustness will likely suffer if non-NSM compliant clients are allowed to participate in a session. The only dependency for client implementations liblo (the OSC library), which several Linux audio applications already link to or plan to link to in the future.

The aim of this project is to thoroughly define the behavior required of clients. This is an area where other attempts at session management (LASH and JACK-Session) have failed. Often the difficulty with these systems has been not in implementing support for them, but in attempting to interpret the confusing, ambiguous, or ill-conceived API documentation. For these reasons and more all previous attempts at Linux audio session management protocols are considered harmful.

You WILL see some unambiguous and emphatic language in this document. For the good of the user, these rules are meant to be followed and are non-negotiable. If an application does not conform to this specification it should be considered broken. Consistency across applications under session management is very important for a good user experience.

1.1. Client Behavior Under Session Management

Most graphical applications make available to the user a common set of file operations, typically presented under a File or Project menu.

These are: New, Open, Save, Save As, Close and Quit or Exit.

The following sub-sections describe how these options should behave when the application is part of an NSM session. These rules only apply when session management is active (that is, after the announce handshake described in the 1.2. NSM OSC Protocol section). In order to provide a consistent and predictable user experience, it is critically important for applications to adhere to these guidelines.

1.1.1. New

This option may empty/reset the current file or project (possibly after user confirmation). UNDER NO CIRCUMSTANCES should it allow the user to create a new project/file in another location.

1.1.2. Open

This option MUST be disabled.

The application may, however, elect to implement an option called 'Import into Session', creates a copy of a file/project which is then saved at the session path provided by NSM.

1.1.3. Save

This option should behave as normal, saving the current file/project as established by the NSM open message.

UNDER NO CIRCUMSTANCES should this option present the user with a choice of where to save the file.

1.1.4. Save As

This option MUST be disabled.

The application may, however, elect to implement an option called 'Export from Session', which creates a copy of the current file/project which is then saved in a user-specified location outside of the session path provided by NSM.

1.1.5. Close (as distinguished from Quit or Exit)

This option MUST be disabled unless its meaning is to disconnect the application from session management.

1.1.6. Quit or Exit

This option may behave as normal (possibly asking the user to confirm exiting).

1.2. NSM OSC Protocol

All message parameters are REQUIRED. All messages MUST be sent from the same socket as the announce message, using the lo_send_from method of liblo or its equivalent, as the server uses the return addresses to distinguish between clients.

Clients MUST create thier OSC servers using the same protocol (UDP,TCP) as found in NSM_URL. liblo is lacking a robust TCP implementation at the time of writing, but in the future it may be useful.

1.2.1. Establishing a Connection

1.2.1.1. Announce

At launch, the client MUST check the environment for the value of NSM_URL. If present, the client MUST send the following message to the provided address as soon as it is ready to respond to the /nsm/client/open event:

/nsm/server/announce s:application_name s:capabilities s:executable_name i:api_version_major i:api_version_minor i:pid

If NSM_URL is undefined, invalid, or unreachable, then the client should proceed assuming that session management is unavailable.

api_version_major and api_version_minor must be the two parts of the version number of the NSM API as defined by this document.

Note that if the application intends to register JACK clients, application_name MUST be the same as the name that would normally be passed to jack_client_open. For example, Non-Mixer sends "Non-Mixer" as its application_name. Applications MUST NOT register their JACK clients until receiving an open message; the open message will provide a unique client name prefix suitable for passing to JACK. This is probably the most complex requirement of the NSM API, but it isn't difficult to implement, especially if the application simply wishes to delay its initialization process breifly while awaiting the announce reply and subsequent open message.

capabilities MUST be a string containing a colon separated list of the special capabilities the client possesses. e.g. :dirty:switch:progress:

Fig. 1.1. Available Client Capabilities
NameDescription
switchclient is capable of responding to multiple `open` messages without restarting
dirtyclient knows when it has unsaved changes
progressclient can send progress updates during time-consuming operations
messageclient can send textual status updates
optional-guiclient has an optional GUI

1.2.1.2. Response

The server will respond to the client's announce message with the following message:

/reply "/nsm/server/announce" s:message s:name_of_session_manager s:capabilities

message is a welcome message.

The value of name_of_session_manager will depend on the implementation of the NSM server. It might say "Non Session Manager", or it might say "LADISH". This is for display to the user.

capabilities will be a string containing a colon separated list of special server capabilities.

Presently, the server capabilities are:

Fig. 1.2. Available Server Capabilities
NameDescription
server_controlclient-to-server control
broadcastserver responds to /nsm/server/broadcast message
optional-guiserver responds to optional-gui messages--if this capability is not present then clients with optional-guis MUST always keep them visible

A client should not consider itself to be under session management until it receives this response. For example, the Non applications activate their "SM" blinkers at this time.

If there is an error, a reply of the following form will be sent to the client:

/error "/nsm/server/announce" i:error_code s:error_message

The following table defines possible values of error_code:

Fig. 1.3. Response codes
CodeMeaning
ERR_GENERALGeneral Error
ERR_INCOMPATIBLE_APIIncompatible API version
ERR_BLACKLISTEDClient has been blacklisted.

1.2.2. Server to Client Control Messages

Compliant clients MUST accept the client control messages described in this section. All client control messages REQUIRE a response. Responses MUST be delivered back to the sender (NSM) from the same socket used by the client in its announce message (by using lo_send_from) AFTER the action has been completed or if an error is encountered. The required response is described in the subsection for each message.

If there is an error and the action cannot be completed, then error_code MUST be set to a valid error code (see 1.2.5. Error Code Definitions) and message to a string describing the problem (suitable for display to the user).

The reply can take one of the following two forms, where path MUST be the path of the message being replied to (e.g. "nsm/client/save":

/reply s:path s:message
/error s:path i:error_code s:message

1.2.2.1. Quit

There is no message for this. Clients will receive the Unix SIGTERM signal and MUST close cleanly IMMEDIATELY, without displaying any kind of dialog to the user and regardless of whether or not unsaved changes would be lost. When a session is closed the application will receive this signal soon after having responded to a save message.

1.2.2.2. Open

/nsm/client/open s:path_to_instance_specific_project s:display_name s:client_id

If a project exists at the path, the client MUST immediately open it.

If a project does not exist at the path, then the client MUST immediately create and open a new one at the specified path or, for clients which hold all their state in memory, store the path for later use when responding to the save message.

No file or directory will be created at the specified path by the server. It is up to the client to create what it needs.

For clients which HAVE NOT specified the :switch: capability, the open message will only be delivered once, immediately following the announce response.

For clients which HAVE specified the :switch: capability, the client MUST immediately switch to the specified project or create a new one if it doesn't exist.

Clients which are incapable of switching projects or are prone to crashing upon switching MUST NOT include :switch: in their capability string.

If the user the is allowed to run two or more instances of the application simultaneously (that is to say, there is no technical limitation preventing them from doing so, even if it doesn't make sense to the author), then such an application MUST PRE-PEND the provided client_id string to any names it registers with common subsystems (e.g. JACK client names). This ensures that multiple instances of the same application can be restored in any order without scrambling the JACK connections or causing other conflicts. The provided client_id will be a concatenation of the value of application_name sent by the client in its announce message and a unique identifier. Therefore, applications which create single JACK clients can use the value of client_id directly as their JACK client name. Applications which register multiple JACK clients (e.g. Non-Mixer) MUST PRE-PEND client_id value to the client names they register with JACK and the application determined part MUST be unique for that (JACK) client.

For example, a suitable JACK client name would be:

$CLIENT_ID/track-1

Note that this means that the application MUST NOT register with JACK (or any other subsystem requiring unique names) until it receives an open message from NSM. Likewise, applications with the :switch: capability should close their JACK clients and re-create them with using the new client_id. Re-registering is necessary because the JACK API does currently support renaming existing clients, although this is a sorely needed addition.

A response is REQUIRED as soon as the open operation has been completed. Ongoing progress may be indicated by sending messages to /nsm/client/progress.

1.2.2.2.1. Response

The client MUST respond to the 'open' message with:

/reply "/nsm/client/open" s:message

Or

/error "/nsm/client/open" i:error_code s:message
Fig. 1.4. Response Codes
CodeMeaning
ERRGeneral Error
ERR_BAD_PROJECTAn existing project file was found to be corrupt
ERR_CREATE_FAILEDA new project could not be created
ERR_UNSAVED_CHANGESUnsaved changes would be lost
ERR_NOT_NOWOperation cannot be completed at this time

1.2.2.3. Save

/nsm/client/save

This message will only be delivered after a previous open message, and may be sent any number of times within the course of a session (including zero, if the user aborts the session).

1.2.2.3.1. Response

The client MUST respond to the 'save' message with:

/reply "/nsm/client/save" s:message

Or

/error "/nsm/client/save" i:error_code s:message
Fig. 1.5. Response Codes
CodeMeaning
ERRGeneral Error
ERR_SAVE_FAILEDProject could not be saved
ERR_NOT_NOWOperation cannot be completed at this time

1.2.3. Server to Client Informational Messages

1.2.3.1. Session is Loaded

Accepting this message is optional. The intent is to signal to clients which may have some interdependence (say, peer to peer OSC connections) that the session is fully loaded and all their peers are available.

/nsm/client/session_is_loaded

This message does not require a response.

1.2.3.2. Show Optional Gui

If the client has specified the optional-gui capability, then it may receive this message from the server when the user wishes to change the visibility state of the GUI. It doesn't matter if the optional GUI is integrated with the program or if it is a separate program \(as is the case with SooperLooper\). When the GUI is hidden, there should be no window mapped and if the GUI is a separate program, it should be killed.

/nsm/client/show_optional_gui 
/nsm/client/hide_optional_gui

No response is message is required.

1.2.4. Client to Server Informational Messages

These are optional messages which a client can send to the NSM server to inform it about the client's status. The client should not expect any reply to these messages. If a client intends to send a message described in this section, then it MUST add the appropriate value to its capabilities string when composing the announce message.

1.2.4.1. Optional GUI

If the client has specified the optional-gui capability, then it MUST send this message whenever the state of visibility of the optional GUI has changed. It also MUST send this message after it's announce message to indicate the initial visibility state of the optional GUI.

/nsm/client/gui_is_hidden
/nsm/client/gui_is_shown

No response will be delivered.

1.2.4.2. Progress

/nsm/client/progress f:progress

For potentially time-consuming operations, such as save and open, progress updates may be indicated throughout the duration by sending a floating point value between 0.0 and 1.0, 1.0 indicating completion, to the NSM server.

The server will not send a response to these messages, but will relay the information to the user.

Note that even when using the progress feature, the final response to the save or open message is still REQUIRED.

Clients which intend to send progress messages should include :progress: in their announce capability string.

1.2.4.3. Dirtiness

/nsm/client/is_dirty
/nsm/client/is_clean

Some clients may be able to inform the server when they have unsaved changes pending. Such clients may optionally send is_dirty and is_clean messages.

Clients which have this capability should include :dirty: in their announce capability string.

1.2.4.4. Status Messages

/nsm/client/message i:priority s:message

Clients may send miscellaneous status updates to the server for possible display to the user. This may simply be chatter that is normally written to the console. priority should be a number from 0 to 3, 3 being the most important.

Clients which have this capability should include :message: in their announce capability string.

1.2.5. Error Code Definitions

Fig. 1.6. Error Code Definitions
Symbolic NameInteger Value
ERR_GENERAL-1
ERR_INCOMPATIBLE_API-2
ERR_BLACKLISTED-3
ERR_LAUNCH_FAILED-4
ERR_NO_SUCH_FILE-5
ERR_NO_SESSION_OPEN-6
ERR_UNSAVED_CHANGES-7
ERR_NOT_NOW-8
ERR_BAD_PROJECT-9
ERR_CREATE_FAILED-10

1.2.6. Client to Server Control

If the server publishes the :server_control: capability, then clients can also initiate action by the server. For example, a client might implement a 'Save All' option which sends a /nsm/server/save message to the server, rather than requiring the user to switch to the session management interface to effect the save.

1.2.7. Server Control API

The session manager not only manages clients via OSC, but it is itself controlled via OSC messages. The server responds to the following messages.

All of the following messages will be responded to, at the sender's address, with one of the two following messages:

/reply s:path s:message
/error s:path i:error_code s:message

The first parameter of the reply is the path to the message being replied to. The /error reply includes an integer error code (non-zero indicates error). message will be a description of the error.

The possible errors are:

Fig. 1.7. Responses
CodeMeaning
ERR_GENERALGeneral Error
ERR_LAUNCH_FAILEDLaunch failed
ERR_NO_SUCH_FILENo such file
ERR_NO_SESSIONNo session is open
ERR_UNSAVED_CHANGESUnsaved changes would be lost
/nsm/server/add s:path_to_executable

Adds a client to the current session.

/nsm/server/save

Saves the current session.

/nsm/server/load s:project_name

Saves the current session and loads a new session.

/nsm/server/new s:project_name

Saves the current session and creates a new session.

/nsm/server/duplicate s:new_project

Saves and closes the current session, makes a copy, and opens it.

/nsm/server/close

Saves and closes the current session.

/nsm/server/abort

Closes the current session WITHOUT SAVING

/nsm/server/quit

Saves and closes the current session and terminates the server.

/nsm/server/list

Lists available projects. One /reply message will be sent for each existing project.

1.2.7.1. Client to Client Communication

If the server includes :broadcast: in its capability string, then clients may send broadcast messages to each other through the NSM server. Clients may send messages to the server at the path /nsm/server/broadcast.

The format of this message is as follows:

/nsm/server/broadcast s:path [arguments...]

The message will then be relayed to all clients in the session at the path path (with the arguments shifted by one).

For example the message:

/nsm/server/broadcast /tempomap/update "0,120,4/4:12351234,240,4/4"

Would broadcast the following message to all clients in the session (except for the sender), some of which might respond to the message by updating their own tempo maps.

/tempomap/update "0,120,4/4:12351234,240,4/4"

The Non programs use this feature to establish peer to peer OSC communication by symbolic names (client IDs) without having to remember the OSC URLs of peers across sessions.