This requires adjusting the svg conversion in kete as well, afaict the 1000
range there was chosen because it's (almost) the midpoint of the Bamboo series
with 2048 pressure grades. So let's use half of 0x10000 instead, which is
approximately 0x8000 as the crow flies.
Fixes#142
This broke device initialization in some cases (not sure why it worked until
today though). Where a device is in register mode but the ManufacturerData has
not yet updated to the 4-byte string (i.e. a device previously known
normally), the device would now always call listen(). The firmware - in
register mode - would start initializing the connection though and get
rejected, leaving us with a device that cannot be registered.
This reverts commit a061240b11.
No functional change, it just uses a dict now to pick the protocol class which
makes it *slightly* easier to read.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of just doing a single log line, let's log this to a yaml file so we
have a permanent record of the interactions with the device for bug reports.
This was getting stacked - once on init and once whenever we actually made a
connecting, resulting in the signal never getting disconnected properly and
some races because we tried to sync twice.
The whole "listen()" vs "listening" vs "connected" etc. is a bit of a mess and
should be reworked for a proper fix to this. But for now this will do.
This may fix#124
Propagated whenever we start talking to the device (and then again when we
stop). The purpose of this signal is merely that a UI can show e.g. a progress
bar while we're talking to the device to ensure the user something is
happening.
Fixes#138
Virtually all the commands we have that don't have a specific opcode expect
0xb3. Since that's the general ACK command, we can default to that and make
everything else the exception.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is what the dbusserver module does as well, so we end up with a weird
mismatch: to the base module the device is still known and unregistered on the
next search start. So when we see the bluez properties float past, we don't
add a new devices.
To the dbusserver the device is gone though and since we don't add it again in
the base module, we never send a signal for it.
Since there's a reasonable assumption that if we don't register the device, we
don't want it anyway, let's delete it from the base device list too.
This doesn't fix the issue of a device timing out while waiting for a button
press. That device will count as known until the next search stop. But at
least now we don't have to restart tuhi.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
tuhi/drawing.py:46: PyGIDeprecationWarning: GObject.property is deprecated;
use GObject.Property instead
@GObject.property
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
No need to get triggered by BlueZDeviceManager when it finds any GATT
characteristic. The BlueZDevice just needs its 'ServicesResolved' and
can resolve the GATT characteristics itself.
This solves a FIXME.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
The object list returned by object managers get_objects() function is
not sorted. Though, we rely on objects being sorted by their object
path.
Replace the object managers get_objects() function with a variant
fixing that. Additionally, our variant makes it possible to filter
the returned object list by object path and interface.
Examples:
- get_objects():
/
/org/bluez
/org/bluez/hci0
/org/bluez/hci0/dev_00_00_00_00_00_00
/org/bluez/hci0/dev_00_00_00_00_00_00/service0000
/org/bluez/hci0/dev_00_00_00_00_00_00/service0000/char0000
/org/bluez/hci0/dev_00_00_00_00_00_00/service1111
/org/bluez/hci0/dev_00_00_00_00_00_00/service1111/char1111
/org/bluez/hci0/dev_FF_FF_FF_FF_FF_FF
/org/bluez/hci0/dev_FF_FF_FF_FF_FF_FF/serviceffff
/org/bluez/hci0/dev_FF_FF_FF_FF_FF_FF/serviceffff/charffff
- get_objects(interface='org.bluez.Adapter1'):
/org/bluez/hci0
- get_objects(interface='org.bluez.GattCharacteristic1'
base_path='/org/bluez/hci0/dev_00_00_00_00_00_00'):
/org/bluez/hci0/dev_00_00_00_00_00_00/service0000/char0000
/org/bluez/hci0/dev_00_00_00_00_00_00/service1111/char1111
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
b3 01 00 seems to be a generic "I'm happy" and the few others we've seen
are errors. So let's encode that and reconsider if it turns out to be false.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
we already are keeping a record of the x,y and p. So we are trying
to duplicate the effort by using new_rel.
The problem is that some reports have relative coordinates but absolute
pressure data. Which means we are missing the pressure change as it has
a relative value of 0.
By trusting the wacom internal state, we can have the json data that
matches it completely.
We need python 3.6 but old Ubuntus only have 3.5. 3.6 can be installed (and
thus we get past the 3.6 sys.version check), but the gi.repository backports
are in various states of disarray (see #103 and #104).
And Python (and in particular gi) makes it hard for users to distinguish
between "the dependencies are a mess" and "this is a bug in tuhi".
So let's catch any error during gi.repository import and print a warning to
the user, in the hope of getting less bugs caused by Ubuntu frankenpythons.
Still won't fix issues like #104, but I'm not sure how to test for those
errors.
Related to #103
Export the supported versions in a Manager property and require the client to
request a specific version in GetJSONData. Without that, the server could
never update the format and clients would have to support every single
historical version to make sure they can run against any version server.
Fixes#98
Because we're totally going to ship tuhi in embedded devices that are going to
be in use until after 2038 when time resets to zero, the world goes big bang
and the only survivers will be 64-bit species. Or something like that. Either
way, the API documentation already said so anyway and the DrawingsAvailable
property is already 64 bit too.
Semi-confusingly: the dbus 64 bit unsigned type is 't', it doesn't stand for
'timestamp'.
It can easily take more than 5 seconds when reading the data. The current
timeout just cuts the connection while it is still reading.
We *could* just remove the timeout here as the device will gracefully
send us a 0xc8 opcode with a blank CRC if we shut the device down while
retrieving the data.
However, better being on the safe side and keep a timeout, but restart it
if we are still getting pen data during the timeout.
Fixes#91
When using the live mode on the Slate, the bloc note actually hampers
the pen and prevents it to address all of the pixels on the screen.
Add some artificial boundaries that roughly match the primary design
of the device.
The Intuos Pro has a clip where you put a regular sheet of paper, so there
is no point restraining the active surface.
Fixes#88
Peter Hutterer