6520b46238
bump version, update changelogs
2016-11-24 19:01:15 +01:00
381323011e
Pebble 2: work around FW installation problems
...
Wait a 0.5s after each complete Pebble packet and do not longer wait at all after a completed GATT package chunk (was 0.1s)
Big outgoing messages will be now much faster such as firmware installations but smaller take more time than before.
(This is not the proper fix but I could update the firmware this way, failed 10 times before after a few percent)
2016-11-24 18:52:58 +01:00
5b804effa4
Pebble: use a proper event handling in the configuration JS
...
This allows more advanced configuration pages to work properly. The problematic config pages emerged while fixing #431
2016-11-24 18:03:47 +01:00
a5a5e66c62
French translation.
...
Changed and added several French messages.
2016-11-24 17:06:43 +01:00
67d89ce1b9
Create the correct start-sync timestamp #323
2016-11-22 22:52:26 +01:00
dfbaba4cb6
Make sure that the charts display the requested time range
...
(instead of only the range with available samples)
2016-11-22 15:53:58 +01:00
a8a7d8db31
Mi2: WIP synchronize only new data since last sync
...
(#323 )
2016-11-22 00:05:41 +01:00
0c51f86afc
Mi2: more work on activity data #323
2016-11-22 00:05:41 +01:00
82cd06f4c1
Mi2: WIP: initial support for activity data
...
(#323 )
2016-11-22 00:05:41 +01:00
dbe96582a7
Changelog for 0.14.0
2016-11-22 00:04:12 +01:00
9dd61031f0
update Japanese from transifex. THANKS!
2016-11-21 17:46:11 +01:00
8cb2030478
update changelogs (mi2 missing)
2016-11-21 17:44:43 +01:00
eb052cead3
Pebble 2: Also honor the mtu when client gets a change reported
...
Should help older LE Pebbles
2016-11-21 17:29:16 +01:00
647b67cfca
Pebble 2: call both requestMTU and use the characteristic write
2016-11-21 15:17:03 +01:00
fce86482b9
Pebble 2: try an alternative way of setting the MTU (might revert)
2016-11-21 14:54:01 +01:00
e8da301da3
Pebble 2: fix a few crashes with disconnect/ reconnect
2016-11-20 22:04:49 +01:00
4f3c46f704
Pebble 2: only add second service if first one was added sucessfully
2016-11-20 00:12:41 +01:00
3b250a4568
Pebble 2: initial hacky reconnect support
...
Works sometimes, at least less crashes
(#432 )
2016-11-19 23:53:07 +01:00
c95587c915
remove _le suffix where not appropriate
2016-11-19 22:45:42 +01:00
029cc02a29
Pebble: Add Pebble specific pairing activity mainly useful for Pebble 2 since it properly pairs the Pebble after connecting with BLE
...
Fixes #433
2016-11-19 22:13:00 +01:00
ddfab1cdae
Pebble 2: use requestMTU() on Android 5+ instead of characteristics write.
...
This actually fixes MTU problems with older Pebbles (Time, OG)
2016-11-18 23:47:48 +01:00
4dc085de57
Pebble 2: React to MTU notifications, fixes LE for older pebbles also
...
It seems that setting the MTU on older pebbles does not work, so just use what we can use.
Maybe old pebbles need setMTU() which only works on Android 5+, we could use that conditionally...
2016-11-18 23:47:48 +01:00
51fa31aa66
Fix BLE type conversions problems
2016-11-18 23:36:22 +01:00
66e3de9168
Pebble 2: improve connection problems (at least for me)
2016-11-18 22:38:39 +01:00
96a16245df
Update to MPAndroidChart 3.0.1
2016-11-18 21:31:55 +01:00
42901a295d
Pebble: pretend the clay-settings key is always present (but empty per default) in the localStorage
2016-11-18 12:33:12 +01:00
d41848014b
fix database schema migration from 13 to 14
2016-11-16 11:37:36 +01:00
485cda52a8
Pebble 2: actually report HRM feature to Charts Activity
2016-11-15 23:41:35 +01:00
d7256d172e
I hate java
2016-11-15 23:23:21 +01:00
163a7bdf15
Pebble 2: save heart rate values to database (hopefully)
2016-11-15 23:21:13 +01:00
1012236989
bump version, not yet release time!
2016-11-15 12:29:18 +01:00
4a243ff361
update Japanese and German from transifex (THANKS!)
2016-11-15 12:22:41 +01:00
82a47022fa
Pebble 2: allow to disable/enable HRM in context menu of Workout app
...
Okay this might be stupid since Workout seems to work also works without HRM!
I assumed (wrongly) that I will disable Workout by disabling HRM
anyway, better than not being able to toggle it at all!
2016-11-15 12:17:51 +01:00
4b7f47ba6c
Pebble 2: add Workout system app to app manager on P2 and hexdump incoming HRM datalog
2016-11-15 11:56:14 +01:00
1a22752b98
Pebble: enable localStorage
...
LocalStorage native functions are overridden to keep each watchface's settings separated. It's possible the bind method do not work on older versions of android.
2016-11-14 17:51:33 +01:00
d8145a52f9
Activate the display when lifting the wrist #323
...
Configurable, defaults to true
2016-11-13 21:47:54 +01:00
00a71f53b3
Pebble 2: add not yet working code (at least not without weird workarounds)
...
This is is a pain because of tons of weird pairing issues
2016-11-13 21:29:58 +01:00
d89899557c
Mi2: Add config option to configure date/time display
...
(added a new EventHandler method to set a specific configuration option)
2016-11-13 20:47:24 +01:00
ddaf51768d
Improved logging
2016-11-13 20:24:25 +01:00
3cc8d887ca
Mi2: Initial support for wear location, hr during sleep and date format #323
...
- wear location from prefs is sent to the band
- hr measurement during sleep is sent to the band
- date format is sent to the band (date+time or just time)
(TODO: needs preference option)
2016-11-13 01:44:52 +01:00
f68bbe453b
Pebble: bump flags and version we report
...
Plus some small preparations for P2 support which do not hurt in master
2016-11-10 11:05:32 +01:00
1fcd7d8144
bump version, update changelogs
2016-11-10 10:51:04 +01:00
eb7646d26a
Pebble: Fix vanished Health system apps (for affected users)
...
This code also allows us to add new system apps which will then appended to the current list of previous Gadgetbridge users.
2016-11-09 19:20:37 +01:00
837dfd5917
Pebble: fix Pebble Health vanishing when deactivating
2016-11-09 12:06:13 +01:00
3b474bb5a9
Move another notify registration to after initialization #408
2016-11-08 22:55:31 +01:00
705912172d
Adjust changelog to confirmed fixed bugreports
2016-11-07 22:22:59 +01:00
16c4f1a5ca
Pebble: add toggle to use last known location for sunrise and sunset
...
This adds the feature discussed in #415 , the used location is the last recorded by the network location provider, if it's not available then the stored location is used.
2016-11-06 15:42:52 +01:00
119c225ec4
Updated translation from transifex (thanks!)
2016-11-04 22:29:58 +01:00
4c1b7e0328
Release 0.13.8
2016-11-04 22:19:51 +01:00
55f036c104
Move heart rate notification enamblement to after authentication
...
Might fix #408 and #425
2016-11-04 22:11:07 +01:00
14ef5202e1
some internal testing which does not hurt in master
2016-11-03 11:07:44 +01:00
0076bbf572
Remove all Mi2 DeviceInfo stuff -- they're not used together #365
...
This might fix firmware downgrading on certain Mi1A devices
with hw revision 8
2016-10-30 23:04:21 +01:00
b9bfb8c93a
Use attr resources to enable theme dependent colors for the charts.
2016-10-29 20:29:35 +02:00
e50574d23c
change string "Open in Pebble Appstore" in "Search in Pebble Appstore"
2016-10-29 19:01:39 +02:00
2b834f96c9
update changelog
2016-10-29 19:00:53 +02:00
e2a9574406
Add logic to open zip files. Lately pebble apps are recognized as such.
2016-10-29 16:27:31 +02:00
a4f615ce71
Update changelog for 3.1.3
2016-10-29 16:08:20 +02:00
d442030c2a
Revert to robolectric 3.1.2 as 3.1.3 does not work at all.
2016-10-29 15:55:27 +02:00
e0d78e8208
update German and Japanese from transifex (thianks!)
2016-10-29 12:58:19 +02:00
5b73690972
update changelogs again (mi band 2 stuff missing)
2016-10-29 12:00:27 +02:00
f755d99023
Pebble: Add context menu option in app manager to search a watchapp in the pebble appstore
2016-10-29 11:41:08 +02:00
c2a9348c6e
Upgrade mpandroidchart and robolectric
2016-10-29 00:51:00 +02:00
8187c6d207
Fix message placeholder
2016-10-29 00:43:59 +02:00
cea5f5fa36
Remove duplicate case here as well
2016-10-29 00:01:56 +02:00
1cadb692fe
Wild guess at trying to fix spontaneous reboots during discovery #412
2016-10-28 23:48:13 +02:00
a941a6cd5f
Make some strings translatable
2016-10-28 23:47:39 +02:00
e75f4f84e1
Hint: you need to enable location for device discovery.
2016-10-28 23:27:25 +02:00
3db9748136
Mi2: Attempt to support non-repetitive alarms #323
2016-10-28 23:18:10 +02:00
e5ade5c0ef
Add Alamr.isRepetitive() convenience method
2016-10-28 22:40:34 +02:00
1352403089
Mi2: Allow for disabling alarms #323
2016-10-28 22:26:07 +02:00
544ec4958b
Allow multiple lines for name in "item_with_details" (fw upgrade log)
2016-10-28 22:18:08 +02:00
300d0466af
Merge pull request #422 from roidelapluie/fcb
...
Mark 3rd party facebook apps notifications as Facebook
2016-10-28 10:45:40 +02:00
55daaf247c
Merge pull request #420 from atkyritsis/master
...
Removed duplicate if statement.
2016-10-28 10:45:09 +02:00
67937dd6ee
Mark 3rd party facebook apps notifications as Facebook
...
- Toffeed: https://f-droid.org/repository/browse/?fdid=me.jakelane.wrapperforfacebook
- Slimsocial: https://f-droid.org/repository/browse/?fdid=it.rignanese.leo.slimfacebook
- MaterialFBook: https://f-droid.org/repository/browse/?fdid=me.zeeroooo.materialfb
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
2016-10-28 07:23:54 +02:00
9a41d4d7a2
bump version, update changelog
2016-10-28 00:51:29 +02:00
d6b9e6d64b
Pebble: Support sending byte arrays from app configuration data
...
Also add debug output if trying to encode unknown classes in PebbleProtocol
(Fixes #421 )
2016-10-28 00:32:45 +02:00
bdf403210e
Pebble: Fix configuration of certain pebble apps
...
for appkeys with index 0 it was assumed they were not found becaus JSONObject.getOpt() returns 0 if not found.
Use the getOpt() method variant with a fallback parameter instead and set that to -1 fixes the problem.
(Also fixes a missing debug output)
Fixes #419
2016-10-28 00:03:50 +02:00
45cf4e5396
Removed duplicate if statement.
2016-10-27 18:44:27 +02:00
d3571d53b2
Mi Band: allow to remove mac address from preferences
...
(this allows to clear an extra mi band from the control center)
Evil hack...
2016-10-26 00:03:54 +02:00
1f77e3e84f
Coordinator: add explicit methods to determine if the device supports app management and which class is responsible for it.
2016-10-25 17:39:11 +02:00
a39e3a035c
Move device deletion logic to DeviceCoordinator and subclasses
2016-10-24 20:02:44 +02:00
de46555e37
Mi2: display heart rate result from Debug screen as a toast #323
2016-10-24 00:23:59 +02:00
b20a9c9ccc
Some initial hacky support for hr readings (Debug activity only)
...
My Mi2 stopped reporting hr values a while ago though, even on-device.
2016-10-23 23:53:48 +02:00
069abe17b7
Release 0.13.6
2016-10-23 23:14:05 +02:00
17b70a1b82
Support for more than one alarm #323
...
Smart alarms not supported yet.
2016-10-23 23:05:54 +02:00
3a12ffd42d
Mi2: Fix for alarm enablement. Was too late, apparently.
2016-10-23 22:38:57 +02:00
192b8e52ed
update hungarian from transifex
...
(that is just transifex having reformatted the translation I tx pushed)
2016-10-21 13:14:09 +02:00
d08012709f
bump version, add changelog
2016-10-21 13:13:08 +02:00
503bcee7b4
Support record version 13 (firmware 4.2)
2016-10-21 13:07:07 +02:00
ee24443b6a
Make it really clear, that only the first alarm works #323
2016-10-21 01:01:30 +02:00
15954d4561
Initial support for alarms (one, atm) #323
...
(repetitinos not tested yet)
2016-10-21 00:50:41 +02:00
839da4f06a
Shuffle some logging things around
2016-10-21 00:50:41 +02:00
c87d08bf4b
Small refactoring for initial support for Mi2 Alarms #323
2016-10-21 00:50:41 +02:00
04673923b6
Merge pull request #414 from geripgeri/hungarian-translation
...
Hungarian translation updated.
2016-10-19 20:39:37 +02:00
858714d73d
update Spanish, Japanese and Italian from transifex (thanks!)
2016-10-19 20:16:27 +02:00
cc2b22cfc7
prefer BIG_TEXT extra from notification only for email
...
(Some messengers accumulate messages in BIG_TEXT)
2016-10-19 18:38:26 +02:00
bca408f366
Hungarian translation updated.
2016-10-19 13:38:45 +02:00
336ffd5bf7
Extract EXTRA_BIG_TEXT instead of EXTRA_TEXT if available.
...
This makes K9 Mail usable with only using generic notifcations on Android >=5
(It shows the message preview now)
2016-10-18 23:44:00 +02:00
9dc9ad6ce4
Updated changelog for 0.13.4
2016-10-11 23:36:05 +02:00
4122e0c20c
Add button "Test New Functionality"
2016-10-11 23:35:58 +02:00
Andreas Shimokawa