34ad088b88
Pebble: Experimental support for BLE on all models via dev option in Pebble Settings
...
HOWTO:
1) Pair you normal Pebble (not necessary if already done), make sure it was connected once
2) Unpair your LE pebble if already paired
3) Switch on "Always prefer BLE" in Pebble Settings
4) Tap on the + in Control Center to add a new device
5) Pair your Pebble-LE XXXX or Pebble Time LE XXXX inside Gadgetbridge's Device Discovery actibity
Now Gadgetbridge will connect to your LE Pebble when tapping on Pebble XXXX if "Always Prefer BLE" option is enabled.
You can easily switch back to classic LE by turning that option off again
2016-11-27 09:49:28 +01:00
a5263141d7
Pebble 2: Ignore all GATT communication with all other that the current device
...
Fixes a bad bug where disconnecting from another BLE device caused the Pebble2 to disconnect
2016-11-25 14:28:04 +01:00
7da328d5db
Fix an invalid leftover check for array length
...
Also removed a method invocation that did not belong there.
2016-11-24 22:16:04 +01:00
3fdfb7d172
Mi2: Support for setting the fitness goal (steps)
2016-11-24 21:58:32 +01:00
381323011e
Pebble 2: work around FW installation problems
...
Wait a 0.5s after each complete Pebble packet and do not longer wait at all after a completed GATT package chunk (was 0.1s)
Big outgoing messages will be now much faster such as firmware installations but smaller take more time than before.
(This is not the proper fix but I could update the firmware this way, failed 10 times before after a few percent)
2016-11-24 18:52:58 +01:00
67d89ce1b9
Create the correct start-sync timestamp #323
2016-11-22 22:52:26 +01:00
dfbaba4cb6
Make sure that the charts display the requested time range
...
(instead of only the range with available samples)
2016-11-22 15:53:58 +01:00
a8a7d8db31
Mi2: WIP synchronize only new data since last sync
...
(#323 )
2016-11-22 00:05:41 +01:00
0c51f86afc
Mi2: more work on activity data #323
2016-11-22 00:05:41 +01:00
82cd06f4c1
Mi2: WIP: initial support for activity data
...
(#323 )
2016-11-22 00:05:41 +01:00
eb052cead3
Pebble 2: Also honor the mtu when client gets a change reported
...
Should help older LE Pebbles
2016-11-21 17:29:16 +01:00
647b67cfca
Pebble 2: call both requestMTU and use the characteristic write
2016-11-21 15:17:03 +01:00
fce86482b9
Pebble 2: try an alternative way of setting the MTU (might revert)
2016-11-21 14:54:01 +01:00
e8da301da3
Pebble 2: fix a few crashes with disconnect/ reconnect
2016-11-20 22:04:49 +01:00
4f3c46f704
Pebble 2: only add second service if first one was added sucessfully
2016-11-20 00:12:41 +01:00
3b250a4568
Pebble 2: initial hacky reconnect support
...
Works sometimes, at least less crashes
(#432 )
2016-11-19 23:53:07 +01:00
ddfab1cdae
Pebble 2: use requestMTU() on Android 5+ instead of characteristics write.
...
This actually fixes MTU problems with older Pebbles (Time, OG)
2016-11-18 23:47:48 +01:00
4dc085de57
Pebble 2: React to MTU notifications, fixes LE for older pebbles also
...
It seems that setting the MTU on older pebbles does not work, so just use what we can use.
Maybe old pebbles need setMTU() which only works on Android 5+, we could use that conditionally...
2016-11-18 23:47:48 +01:00
66e3de9168
Pebble 2: improve connection problems (at least for me)
2016-11-18 22:38:39 +01:00
d7256d172e
I hate java
2016-11-15 23:23:21 +01:00
163a7bdf15
Pebble 2: save heart rate values to database (hopefully)
2016-11-15 23:21:13 +01:00
82a47022fa
Pebble 2: allow to disable/enable HRM in context menu of Workout app
...
Okay this might be stupid since Workout seems to work also works without HRM!
I assumed (wrongly) that I will disable Workout by disabling HRM
anyway, better than not being able to toggle it at all!
2016-11-15 12:17:51 +01:00
4b7f47ba6c
Pebble 2: add Workout system app to app manager on P2 and hexdump incoming HRM datalog
2016-11-15 11:56:14 +01:00
d8145a52f9
Activate the display when lifting the wrist #323
...
Configurable, defaults to true
2016-11-13 21:47:54 +01:00
00a71f53b3
Pebble 2: add not yet working code (at least not without weird workarounds)
...
This is is a pain because of tons of weird pairing issues
2016-11-13 21:29:58 +01:00
d89899557c
Mi2: Add config option to configure date/time display
...
(added a new EventHandler method to set a specific configuration option)
2016-11-13 20:47:24 +01:00
3cc8d887ca
Mi2: Initial support for wear location, hr during sleep and date format #323
...
- wear location from prefs is sent to the band
- hr measurement during sleep is sent to the band
- date format is sent to the band (date+time or just time)
(TODO: needs preference option)
2016-11-13 01:44:52 +01:00
f68bbe453b
Pebble: bump flags and version we report
...
Plus some small preparations for P2 support which do not hurt in master
2016-11-10 11:05:32 +01:00
3b474bb5a9
Move another notify registration to after initialization #408
2016-11-08 22:55:31 +01:00
55f036c104
Move heart rate notification enamblement to after authentication
...
Might fix #408 and #425
2016-11-04 22:11:07 +01:00
14ef5202e1
some internal testing which does not hurt in master
2016-11-03 11:07:44 +01:00
0076bbf572
Remove all Mi2 DeviceInfo stuff -- they're not used together #365
...
This might fix firmware downgrading on certain Mi1A devices
with hw revision 8
2016-10-30 23:04:21 +01:00
cea5f5fa36
Remove duplicate case here as well
2016-10-29 00:01:56 +02:00
3db9748136
Mi2: Attempt to support non-repetitive alarms #323
2016-10-28 23:18:10 +02:00
1352403089
Mi2: Allow for disabling alarms #323
2016-10-28 22:26:07 +02:00
55daaf247c
Merge pull request #420 from atkyritsis/master
...
Removed duplicate if statement.
2016-10-28 10:45:09 +02:00
d6b9e6d64b
Pebble: Support sending byte arrays from app configuration data
...
Also add debug output if trying to encode unknown classes in PebbleProtocol
(Fixes #421 )
2016-10-28 00:32:45 +02:00
45cf4e5396
Removed duplicate if statement.
2016-10-27 18:44:27 +02:00
de46555e37
Mi2: display heart rate result from Debug screen as a toast #323
2016-10-24 00:23:59 +02:00
b20a9c9ccc
Some initial hacky support for hr readings (Debug activity only)
...
My Mi2 stopped reporting hr values a while ago though, even on-device.
2016-10-23 23:53:48 +02:00
17b70a1b82
Support for more than one alarm #323
...
Smart alarms not supported yet.
2016-10-23 23:05:54 +02:00
3a12ffd42d
Mi2: Fix for alarm enablement. Was too late, apparently.
2016-10-23 22:38:57 +02:00
503bcee7b4
Support record version 13 (firmware 4.2)
2016-10-21 13:07:07 +02:00
ee24443b6a
Make it really clear, that only the first alarm works #323
2016-10-21 01:01:30 +02:00
15954d4561
Initial support for alarms (one, atm) #323
...
(repetitinos not tested yet)
2016-10-21 00:50:41 +02:00
839da4f06a
Shuffle some logging things around
2016-10-21 00:50:41 +02:00
c87d08bf4b
Small refactoring for initial support for Mi2 Alarms #323
2016-10-21 00:50:41 +02:00
21fc5c7498
Integrate Daniele's live-sensor-data support
2016-10-11 23:13:40 +02:00
713989ef38
Add event "test new function" for the debug screen
2016-10-11 23:06:59 +02:00
7c3dc741d2
Send vibration off-commands to Mi2 ( #323 )
...
Far from perfect, but a little better.
2016-10-11 21:38:17 +02:00
e7c0afa603
Cleanup onNotification()
2016-10-11 21:18:43 +02:00
a094f0cc76
Mi Band: for vibration settings, group navication types (email, sms, chat, social network, navigation)
2016-10-11 15:20:55 +02:00
cd195a5969
map more apps to notification types (icons and colors on the pebble)
2016-10-11 11:54:52 +02:00
92c629c351
Ranem NotificationType.UNDEFINED to UNKNOWN
2016-10-10 23:06:44 +02:00
62828e5158
Remove ORIGIN_ notification constants, clean up
...
- MI preferences now use NotificationType.getFixedName() for preference
keys
2016-10-10 22:45:26 +02:00
db034a246c
Add 'Try' button to vibration profile preferences, closes #405
2016-10-09 00:10:53 +02:00
9e32e7d0d3
Remove some Mi2 testing code, only use Mild Alerts for Mi1 (fow now)
2016-10-08 22:43:41 +02:00
125c0092cb
Storage and improved way of realtime data (hr, steps so far)
2016-10-08 01:35:58 +02:00
713e9426b9
Re-enable UUID_PAIR again, when keeping data on device is configured) #250
...
This should fix data sharing with Mi Fit
2016-10-05 23:01:35 +02:00
f23ed5ce69
Mi2: declare to always support hr #323
2016-10-03 21:17:58 +02:00
5bdc7933b3
Somewhat hacky support for Mi2 notification icons #323
2016-10-02 23:04:59 +02:00
42f622af85
Support record version 12 (firmware 4.1)
2016-09-30 17:28:46 +02:00
9cccb085c4
Pebble: allow sending acks to pebblekit android apps which always use transaction id -1 (this seems to be okay for pebblekit apps which do not want to use real transaction ids)
2016-09-26 21:51:11 +02:00
8080734470
Pebble: use telegram icon for telegram messages
...
also use the facebook icon for the official facebook app
(untested because we would never use facebook)
2016-09-21 21:31:23 +02:00
1bd919ccaa
For a start, we can reuse the alert notification from Mi 1 #323
...
So vibration works :-)
2016-09-20 23:41:50 +02:00
ccdb843b6e
Improved Mi Band 2 support #323
...
- connecting works and is stable
- firmware and hardware version is displayed
- time is set
2016-09-20 23:12:17 +02:00
1f8cfa5a68
Vibratissimo: clear queue when setting vibration
2016-09-20 21:49:27 +02:00
6a18d90fee
Vibratissimo: add simple and buggy activity with a slider for vibration control
...
Also includes some fixes and "find your device" support ;)
2016-09-20 20:28:52 +02:00
da01a76594
fix BatteryInfoProfile NPE, show battery level for Vibratissimo
2016-09-19 16:37:45 +02:00
8ba7bc7353
Add (useless) support for Vibratissimo "massage devices"
...
Don't take this serious. It will make the "massage device" vibrate when a phone call arrives.
It is inspired by the famous lawsuit[1] which has nothing to do with the Vibratissimo device maker.
After reading this I picked up the cheapest ble massage device just to see if we could support it.
And yes, we can.
[1] http://arstechnica.com/wp-content/uploads/2016/09/vibratorsuit.pdf
2016-09-19 12:37:41 +02:00
53d4681763
Optimize Imports
2016-09-13 23:53:35 +08:00
19fbe5719c
When miband2 auth success, let application show miband status is connected
2016-09-13 23:50:35 +08:00
08f2b0eb7c
fix somebug and rewirte the auth process
2016-09-13 18:15:03 +08:00
90d730bdc8
Added miband2 connection support
2016-09-13 01:28:50 +08:00
e555066ffc
Fix firmware2 not being set
2016-09-11 21:15:36 +02:00
9c2e40ecc0
Pebble: fix mixup of userId and deviceId in contructor for Misfit and Morpheuz samples
2016-09-11 00:12:37 +02:00
5cbedc782d
Pebble health: accept records of firmware 4.0 (nothing changed among the data we parse)
2016-09-04 15:59:19 +02:00
84e644fa1a
Add preference for save raw pebble health data.
2016-08-31 14:05:02 +02:00
c59553c9c9
Rename GBDevice#hardwareVersion to model
...
(e.g. while DeviceType is "PEBBLE" in general, the model
might specify a Pebble Time or Time Steel.
2016-08-26 20:57:59 +02:00
2a2ad20aa3
Store raw data in the DB for later interpretation.
2016-08-21 20:24:02 +02:00
3fb558c536
db refactoring: add raw data column in health overlay table and make rawType part of the composite key
2016-08-18 22:06:26 +02:00
0126b90f20
Store the timestamps as sent by the pebble. Use a strict inequality operator at the end of the period to exclude the last sample.
2016-08-18 21:44:06 +02:00
ce8af615d1
Merge branch 'composite-key-dao'
2016-08-18 20:35:56 +02:00
fbf06c1fe3
Separate coordinator and support instances for Mi1 and Mi2 #323
...
+ Some more testing stuff for Mi2
2016-08-17 00:53:16 +02:00
69933c5e92
db refactoring: depend on latest -fyg patched greendao, change column order again (primary keys first), remove index from pebble health overlay also
2016-08-14 22:33:41 +02:00
eb962c65f0
work towards composite keys
...
(builds but does not run because greendao generates wrong table creation code - we need to fix that)
2016-08-13 01:24:43 +02:00
68b303246d
db refactoring: change column order for health overlay table also
2016-08-10 23:26:25 +02:00
359ed46b06
db refactoring: remove raw activity kind field from pebble health minute data, add a blob column for raw undecoded health minute data.
...
also:
- change column order for all pebble related minute data tables (mandatory stuff first, then custom columns, for easier addition of new columns)
- remove unused code
TODO:
- fix column order in Mi Band table also
2016-08-10 23:06:07 +02:00
4a7a34f461
Use only the overlay table for storing overlay data.
...
This removes the need to wait to have minute samples to store the overlay data, hence store has been made void instead of boolean.
2016-08-09 18:05:24 +02:00
5072d6b959
Pebble: try to write to health activity overlay table
2016-08-08 19:16:53 +02:00
6b2565e4c9
DB refactoring: remove activity type from Morpheuz database, determinate it in PebbleMorpheuzSampleProvider instead
2016-08-07 01:47:15 +02:00
e05d40dc7e
Pebble: Support for latest version of Morpheuz (4.6)
...
Also a few simplifications and minor fixes.
Morpheuz 3.7 should still work (last version for FW 2.x)
2016-08-06 01:19:38 +02:00
4fe498efc2
Pebble: delay 100ms after writing a pebble packet to the output steam
...
This fixes a problem on newer firmwares, probably from 3.0 on, where sending an
appmessage packet right after acknowledging a previous incoming appmessage
packet results in our outgoing appmessage packet to be NACKed by the pebble
firmware and not even reaching the app running on the pebble.
2016-07-31 23:49:19 +02:00
8ba1ae3f3e
create extra table for Morpheuz, remove more unused stuff
...
Pebble activity tracker now do not share a common base anymore.
TODO: consider creating a custom way of querying activity types like in Misfit. The activity kind stored in the database now is solely based on the intensity, so it is redundant.
(#206 )
2016-07-31 00:06:26 +02:00
eabe625c47
rename some classes, remove obsolete ones
2016-07-30 23:22:27 +02:00
b43b7948b0
Let GallCallback return boolean values in order to mark an event as "consumed"
...
(to avoid dispatching the event to further listeners (ble profiles)
2016-07-28 23:04:37 +02:00
b22111df9d
Fix field ordering of ActivitySample (c'tor!) and improve importer #206
2016-07-28 22:12:20 +02:00
8ea29e6e1d
Refactor database / sample access ( #206 )
...
We now have separate tables for each provider's samples but a common interface.
2016-07-27 23:34:13 +02:00
726f767576
work towards a Pebble Misfit raw sample table
2016-07-25 22:19:39 +02:00
f5ba09ebe0
Some babysteps towards miband2 support #323
...
Start to implement standard BLE profiles/services.
2016-07-25 00:00:22 +02:00
7b26986ab0
Fix for #349
...
We must not use UUID_CHAR_PAIR anymore. This prevents connecting
without being bonded. Connecting when bonded still works.
As without bonding, ControlCenter would not display the device anymore,
we have to re-install the "remember last connected device" in the
preferences thing.
2016-07-15 00:13:49 +02:00
367091587f
No more 0x8 in the logs
...
It's the confirmation that setting the latency succeeded.
2016-07-14 20:15:54 +02:00
91d1cea51f
Avoid potential NPEs
2016-07-04 22:40:24 +02:00
73b2fc357e
Pebble: Add some Pebble Time 2 support - NOT WORKING
...
Not working because these are expected to use BLE.
The Emulator should work though.
2016-07-04 22:09:56 +02:00
8b24e098ea
Set sampleProvider to avoid NPEs
2016-07-01 00:22:54 +02:00
f65afa64d9
log raw activity data from mi band, closes #341
...
Hopefully aids in deciphering activity kinds.
2016-06-28 23:23:29 +02:00
f0da25c49b
Fix activity fetching getting stuck when double tapping #333
2016-06-28 23:07:24 +02:00
e70a2290c3
sampleproviders now return device specific data #206
2016-06-27 20:43:48 +02:00
659165fa4c
Pebble: fix new app manager on 2.x
...
- properly intert apps reported from pebble into the corresponding tab
- disable tracking of installed apps
- disable drag and drop for apps and watchfaces
- ...
2016-06-24 13:39:29 +02:00
1de6ee019f
Pebble: fix regression. FW 2.x was completely broken
...
No one noticed, so it seems we can kill 2.x support soon :D
2016-06-24 12:07:44 +02:00
b77f3ad3bf
Pebble: Implement call dismissal with canned messages
...
This also moved the canned replies setting to pebble settings
(we will change that if we have another device supporting this)
2016-06-24 10:25:08 +02:00
67e5bc0434
Pebble: implement decline call with SMS
...
Based on a proposal by @danielegobbetti, thanks!
This still does not enable the feature since the necessary blobdb is not filled yet
2016-06-21 00:31:53 +02:00
9772d8af06
Merge remote-tracking branch 'origin/master' into db-refactoring
2016-06-19 21:14:03 +02:00
4b5969ef96
Merge branch 'master' into appmanager-fragments
2016-06-19 12:33:05 +02:00
f42899d910
Pebble: on FW 2.x do not send extended music info and do not send playstate
...
I don't think they are supported and I cannot test.
2016-06-19 12:17:19 +02:00
79b439da28
Implement App Sorting
...
- grab icon to move apps
- cache can be sorted but nothing will be send to watch
- if sorting apps or watchfaces, order will be sent to watch
- we try to keep track of what is installed and what not
Firmware 2.x is currently not working properly
2016-06-17 22:43:06 +02:00
d544509b60
Merge remote-tracking branch 'origin/master' into db-refactoring
2016-06-16 21:55:16 +02:00
b79b94809a
initial support for FW 4.0-dp1
2016-06-16 00:24:27 +02:00
d225743d64
Pebble: some preparations for Pebble 2
2016-06-15 22:53:05 +02:00
a01507a924
Merge remote-tracking branch 'origin/master' into db-refactoring
2016-06-14 20:14:04 +02:00
98999993e5
Pebble: In AppManager allow moving apps on the device to the top (context menu)
2016-06-12 01:20:12 +02:00
f812fb1b1f
Improvements to MusicPlayback receiver
...
- Also send duration if "duration" extra is present
- If "playing" and "postion" extras are present send a music state update
treat previous state and current state as equal if position delta is <=2 seconds
(Neccessary for some players which update every second - the pebble however counts by itself)
2016-06-11 23:37:03 +02:00
9623449b6e
Merge branch 'master' into feature-weather
2016-06-09 23:15:23 +02:00
b76619bb5b
Pebble: implement app reordering in PebbleProtocol
...
Not yet used.
2016-06-09 23:14:40 +02:00
fd31bfe56b
Merge pull request #325 from stepardo/steffen/pocketcasts_notifications
...
Set extended music info by dissecting notifications on Android 5.0+
2016-06-09 23:12:17 +02:00
c5262869d9
Use names for playstates
...
These names need to be mapped to device specific constants in the
device code.
2016-06-09 20:02:55 +02:00
91f374edec
Revert ""duration" parameter in onSetMusicInfo uses microseconds"
...
The decision on granularity of APIs is up to the maintainers.
This reverts commit 204748c518
2016-06-09 20:02:55 +02:00
088dfda5f4
Pebble: implement app reordering in PebbleProtocol
...
Not yet used.
2016-06-09 19:55:36 +02:00
204748c518
"duration" parameter in onSetMusicInfo uses microseconds
...
This is in line with Android, and saves some calculations (and thereby a
tiny little bit of battery life).
2016-06-08 20:43:46 +02:00
e386d6da43
Add onSetMusicState(MusicStateSpec stateSpec)
...
This commit contains the infrastructure needed for the
NotificationHandler to send music state information to the device. That
is, it introduces a call onSetMusicState(MusicStateSpec stateSpec), that
in turn sets up an intent to the service, which will then call the
encodeSetMusicState() function of the device. encodeSetMusicState is
available for pebble only. There are empty stubs for other devices.
2016-06-08 20:31:48 +02:00
0470731e4b
PebbleProtocol: Do not call encodeSetMusicState in encodeSetMusicInfo
...
encodeSetMusicState will be accessible on its own. If it was used to set
the music state, a call to encodeSetMusicInfo must not reset this info
arbitrarily.
2016-06-08 20:16:33 +02:00
98a0774fc2
Merge branch 'master' into feature-weather
2016-06-07 22:53:40 +02:00
32429df7bc
Pebble: allow to enable or disable sync for each activity tracker in settings
...
This is useful if you have multiple phones and do not want to have your data synced to one of them
2016-06-07 22:51:14 +02:00
ae548d0806
WIP: more work, compile again
2016-06-06 23:18:46 +02:00
3b87966fe9
Merge branch 'master' into db-refactoring
2016-06-06 22:16:40 +02:00
2b6ee41970
Add logging of heartrate values #318
2016-06-05 22:37:42 +02:00
ca26e27c60
Basic support for Mi Band 2 #323 , untested
2016-06-05 22:31:07 +02:00
9d3f3c57cd
Pebble: make disabling of appmessage handlers more generic
...
Also disable morpheuz handler if morpheuz is not the chosen activity tracker
.... and bump reported version to 3.12 to match the latest pebble release
2016-06-04 21:50:26 +02:00
321707af8f
Pebble: ignore incoming misfit data if misfit is not set as the preferred activty tracker
2016-06-04 21:33:38 +02:00
968d15c8d8
Keep the pebble health data on the pebble watch if the activity provider is not pebble Health.
...
This will nack all pebble health datalog messages. As mentioned in #322 , this would allow to use multiple android device without secondary devices "sipping" the health data from the watch.
2016-06-04 18:21:49 +02:00
2e6536555b
Fix previous commit (compile!)
2016-05-31 22:56:22 +02:00
9a106667d2
Setting the wear location appears to fail for amazfit #274
...
So as a test, disable that for amazfit. Let's see what happens
next.
2016-05-31 22:33:38 +02:00
19d7c03545
Pebble: get rid of log spamming when changing applications (unhandled message)
2016-05-31 14:18:45 +02:00
b71597800a
Pebble: set device to reconnecting state when actively reconnecting
...
It makes it easier to watch connection attempts and the delay between them in control center.
2016-05-29 23:24:16 +02:00
33da6c2925
Pebble: make sure that "waiting for reconnect" state is set when initial connect fails
2016-05-29 22:58:25 +02:00
e3bee37b81
Change UUID prefix to 0x4767744272646700
2016-05-24 13:20:16 +02:00
cb1ec5dccb
Make calendar event type byte instead of int
...
Now the UUID will be constructed like this:
High 64bit 0x4742474200 | type
Low 64bit id
2016-05-24 13:11:57 +02:00
ec154c9041
Merge branch 'master' into feature-weather
2016-05-24 11:09:21 +02:00
af3cfefec0
Merge branch 'master' into feature-sunrise
2016-05-23 23:52:39 +02:00
bef59ae9c0
Parse new version of Pebble health datalog message with tag "84".
...
This message was previously treated as a further "Sleep" message type, with firmware version 3.12 further types were added that are clearly unrelated to sleep (possibly to high-intensity activities like running etc.), hence the related code is now moved to a separate class.
The only decoded records are still sleep-related.
Fixes #312
2016-05-23 21:13:12 +02:00
6370fdbebe
Merge branch 'master' into feature-sunrise
2016-05-22 01:25:52 +02:00
0d7986a5ab
Pebble: rework incoming reconnection support
...
This is now completely generic and should work for other devices also
Fixes #296
2016-05-22 01:19:28 +02:00
4bd578ebea
Pebble: send sunrise/sunset to watch for today and tomorrow, also delete previous timeline pins
2016-05-16 23:37:40 +02:00
876bdac918
More WIP: remove now unused code, better use of generics
2016-05-16 23:36:54 +02:00
40a376bbd0
Merge branch 'master' into db-refactoring
2016-05-16 23:01:16 +02:00
3e0bc16741
More WIP, but we're getting closer
...
current state:
- storing samples works (tested only mi band)
- charts work
2016-05-16 23:00:04 +02:00
017f650b3f
Pebble: send sunrine and sunset pins to timeline when setting time in debug menu
...
This is just a test and it will leak your timeline data, since we never delete it.
Also this adds some rough infrastructure for calendar events.
2016-05-16 17:30:11 +02:00
dafdb1008d
Merge branch 'master' into feature-weather
2016-05-16 14:15:39 +02:00
3a1f91b5a8
Default to low latency mode #287
...
Tested with Mi1A and Mi1S -- works fine and faster than without
low-latency mode.
2016-05-15 00:22:53 +02:00
5963843216
Experimental support for #274 (untested yet)
2016-05-15 00:15:31 +02:00
8ca821ab8a
More WIP on db refactoring
2016-05-13 23:47:47 +02:00
d0c8483d92
More WIP
2016-05-08 23:49:15 +02:00
9b7f2c1e91
try to fix weiredness with pebble reconnects
2016-05-08 17:19:01 +02:00
65a95366f4
Mi Band: Allow setting low-latency FW update mode in Mi Band development settings
2016-05-04 13:24:32 +02:00
5e02724c4c
Make automatic reconnect after connection loss configurable #293
...
Mi Band: automatically reconnect when the device is back in range
Also: #89
2016-04-28 23:17:13 +02:00
e35ce978bd
Remove now unused imports + fix one more SharedPreferences usage
2016-04-25 23:43:19 +02:00
0704915a88
Move parsing of preference strings to int values to Prefs
2016-04-25 23:39:03 +02:00
0c715a2669
Wrap access to SharedPreferences with "Prefs"
...
(to centralize quirk handling)
2016-04-25 23:18:55 +02:00
78bf516897
Disabling sleep measurement for continuous measurement is not necessary
...
Looks like they don't interfere, after all. #178
2016-04-12 23:25:12 +02:00
f15a97d994
Initial live heartrate measurement in the live activity tab #178
2016-04-12 23:12:50 +02:00
a49335fa67
Allow to change stored samples converting only certain old types
2016-04-07 17:52:15 +02:00
e91b5a07bd
Pebble: change delay between reconects to 1,2,4,8,16,32,64 (max) seconds
2016-04-06 22:55:04 +02:00
94cec55a20
Merge pull request #276 from roidelapluie/reconnect
...
Pebble: Smarter reconnection attempts
2016-04-06 22:41:07 +02:00
d2af3468f0
Add support for new datalog message added in pebble firmware 3.11
...
This adds support for storing deep sleep data.
2016-04-06 21:48:16 +02:00
e42a041448
Pebble: Smarter reconnection attempts
...
Sleep several seconds between reconnection attempts:
One second after first attempt, two after the second, and so on.
refs #89
2016-04-06 12:37:23 +02:00
51def0d497
Add light intensity to the known steps datalog message.
...
Add support for record version 6 introduced with firmware 3.11.
There are more data in each record now, but we still do not know what they mean.
Close #270
2016-04-04 23:33:17 +02:00
34600e085e
Fix wrong assignment, needed to properly deal with datalog messages longer than 255
2016-04-04 23:13:57 +02:00
a15b327ff1
Refactoring: get rid of ServiceCommand, use new CallSpec and MusicSpec to pass Call and Music info
2016-04-04 20:08:34 +02:00
59c3970008
Reuse characteristic objects #234
2016-04-03 23:01:58 +02:00
b129844169
Small fixes to PR 273 #232
...
- dynamically toggle hr sleep support when preference changes
- check hr support dynaically after device info is available to avoid false error message
2016-04-03 22:38:06 +02:00
7cda9f1923
Merge branch 'computerlyrik-heartrate-sleep-support'
2016-04-03 21:46:29 +02:00
804a85d31f
Small refactoring of BtLE actions
2016-04-03 21:46:24 +02:00
b54fe53cd5
Merge branch 'heartrate-sleep-support' of https://github.com/computerlyrik/Gadgetbridge into computerlyrik-heartrate-sleep-support
2016-04-03 21:02:45 +02:00
4389c1cca3
Pebble: wait 4 seconds instead of 2 when notifications/calls trigger reconnection
2016-04-03 18:36:30 +02:00
7ddfd35c35
Pebble: auto connect on incoming notification or phone call if connection was lost unxpectedly before
2016-04-03 18:30:20 +02:00
a4919789ca
Add some progress to firmware updating #271 #234
...
Also: remove the low latency mode for firmware update,
because my Mi1S simply disconnects then.
Still missing in the view: device disconnects
2016-04-03 00:50:45 +02:00
2d10c11005
Log the length of the bytes written
2016-04-02 22:35:37 +02:00
0e49535966
Fix progress during fw update #234
2016-04-02 22:24:33 +02:00
f2de21a664
test if heartrate is supported before writing preferences
2016-04-02 16:11:51 +02:00
20aa7d9ad9
add preference to set hartrate sleep detection
2016-04-02 16:09:30 +02:00
ea5c6a0848
Log ignored notifications when updateCoordinator is null
2016-03-31 21:57:36 +02:00
6f97b8c1e5
Log the date that we receive from the Mi Band
2016-03-31 21:54:09 +02:00
66c1b3f178
Relax check for Mi1S device detection #234
2016-03-31 21:39:51 +02:00
4631df67ac
Some more logging + add svg launcher again (somehow it was not added again)
2016-03-30 22:53:08 +02:00
ffc006c21c
Fix ordering problem with firmwareInfoSent state variable #234
2016-03-30 21:56:00 +02:00
cc7f5406ef
Use low latency transfer mode for fw update #234
2016-03-30 21:48:42 +02:00
e931cf47d7
Need to pass '0' as parameter to mi band fw metadata info #234
2016-03-29 22:15:14 +02:00
8815f0d134
Small cleanups and fixlets.
2016-03-28 23:02:22 +02:00
6ce63276a3
play around with play states, simplify weired nested switch
2016-03-27 19:50:32 +02:00
adfef3db42
Prepare code for more music metadata (duration, track count, current track number)
...
Oh and format code
2016-03-27 17:45:44 +02:00
8165751e57
Refactoring to test the double firmware update procedure #234
...
(while performing the same, known to be working firmware update for Mi1A)
Result: double firmware update procedure works on Mi1A.
Also updated FirmwareTest. Perform all tests not only in the test itself,
but also at runtime before doing the actual update.
Further:
- fix setting of firmwareInfoSent state variable, which prevented installation
of the section firmware
- make one string translatable
2016-03-25 23:45:27 +01:00
3714ec82da
Extracted String "HR: ", (= Heart Rate Firmware Version)
2016-03-24 22:23:16 +01:00
89eddb13b0
Fixed connection issues by reading the date from the band #249
2016-03-24 22:10:23 +01:00
e5b0afb916
Enable low latency during activity sync
2016-03-24 21:26:51 +01:00
11ac01f0e8
Set low latency mode during initialization #249
...
This appears to fix the initialization getting stuck sometimes, e.g.
after turning on bluetooth and then connecting.
The band incidentally sends 0x8 when it's stuck (won't accept the UUID_PAIR
request).
2016-03-23 22:50:42 +01:00
b0ec74696d
Give better feedback when a firmware cannot be installed #234
2016-03-22 16:12:27 +01:00
424d9cd142
More work on firmware detection, recognition and validation #234
...
Should be as robust as possible now.
2016-03-21 23:42:34 +01:00
275839a7f4
last arg of copyOfRange() is index, not length!
2016-03-21 04:18:45 +01:00
f7b71c1f96
Add logging to firmware detection #234
2016-03-21 04:17:12 +01:00
4be1926459
reformat code though Android Studio
2016-03-20 15:00:05 +01:00
b3410dcebe
Improved testcase #234
2016-03-20 12:18:43 +01:00
4f956000c5
Enhanced support for firmware detection, recognition and upgrade #234
...
Also supports double firmware upgrade for Mi1S.
- so far, only hr firmware upgrade is tested for 1S
- adds junit testcases for firmware recognition and handling
2016-03-20 01:07:57 +01:00
6d8d6d5bc8
Testcases for firmware checking
2016-03-20 01:07:57 +01:00
c5a887192d
Remove/revert some temporary test code
2016-03-16 00:27:32 +01:00
e26e6d7b24
Display HR firmware version
...
Hide fw,hw,hr versions by default and show them on demand with an info
button.
2016-03-16 00:27:32 +01:00
91f02ae920
WIP: Lots of work towards double firmware update for Mi 1S #234
2016-03-16 00:27:08 +01:00
a89fea9c7d
Pebble: Fix crash when starting pebstyle
...
Also make code for "push" handlers more generic
2016-03-08 12:02:00 +01:00
88982a6174
Merge pull request #235 from Freeyourgadget/feature-configuration
...
Use external browser for configuring pebble apps
2016-03-08 10:41:46 +01:00
5eb8f57b4c
Some more byte -> int conversions
2016-03-07 22:47:34 +01:00
be012eca8d
For Mi Band 1A (fw 5.15.7.14) we get 0xa for auth success #180
2016-03-07 21:43:45 +01:00
50dd7f5eba
Better check for heartrate support on non-heartrate devices
2016-03-07 21:36:31 +01:00
3920b3f977
Do not override the configured settings with our old stored values (but keep them around)
2016-03-04 17:43:43 +01:00
bd7b34985b
reformat code and optimize imports
2016-03-03 15:47:00 +01:00
2a7f9226a0
Pebble: send configuration to watch
...
TODO: handle booleans
2016-03-03 14:23:17 +01:00
63d938559e
pass GBDevice down to ExternalPebbleJSActivity to determine the platform version (aplite,basalt,chalk)
2016-03-03 11:52:30 +01:00
fc464d112d
change some more short and byte to int regarding Morpheuz
2016-02-29 23:13:07 +01:00
cbe73f71a1
Fix some typos (thanks!) #178
2016-02-29 22:08:34 +01:00
ed85fd5011
convert byte and short values related to activity tracking to int
...
This avoids a lot of problems because java
- does not know unsigned values
- jvm and dalvic do not internally support byte and short
- sqlite does not know them either
2016-02-29 20:54:39 +01:00
ddde25e5df
Initial firmware update support for Mi1S #234
2016-02-28 02:46:48 +01:00
d7822d07a6
Show the measured heart rate as a Toast, for now #178
2016-02-27 23:27:15 +01:00
3ff31cd73b
Disable heartrate in charts fow now, fix notification for manual hr
2016-02-27 23:18:44 +01:00
ac8d7bee5f
Only do heart rate stuff when supported #178
2016-02-27 11:23:55 +01:00
de6f898fef
Some more fixes regarding heart rate measurement #178
2016-02-27 11:18:16 +01:00
9e636d66f6
Initial heart rate support by KashaMalaga #178
...
(removed unrelated Android M fixes and squashed commits)
2016-02-27 00:05:06 +01:00
0ef738067d
Some work in progress for heart rate graphs #178
...
Currently we get the heart rate when synchronizing activity data
(i.e. not live) and we write it to the activity database so that we
can show a nice graph. The value is currently always 0 though,
because we can't enable recording hr, yet.
2016-02-26 23:45:17 +01:00
df741e9571
Install app on watch directly instead of telling the user to do so.
2016-02-26 15:29:26 +01:00
0b568df8de
Extra byte indeed appears to be heartrate value #205
2016-02-26 00:04:33 +01:00
095ef56c14
Initial support for activity data sync with Mi 1S #205
...
Looks like the activity type is somehow wrong though, or I'm sleeping
all day ;-)
2016-02-25 23:52:34 +01:00
c86365ee2e
Some more Mi Band pairing improvements #180
...
- listen to notifications early -- the band then actually tells us that
authentication is required
- check for this after sending user info
- add authentication states to GBDevice
- workaround for event problems in pairing activity (delivered although
already unregistered)
- BtLEQueue now deals with gatt events coming *before* connectGatt()
actually returned (namely the connection event)
2016-02-13 00:15:16 +01:00
8294921de7
Do not ack the sleep data until we can actually store them
...
Added helper method to fetch the latest timestamp stored in the DB, needed for the aforementioned feature.
Update changelog
This closes #188 \o/
2016-02-11 19:14:40 +01:00
7436778700
Pebble: fix for recent morpheuz versions (maybe breaks old versions)
2016-02-11 12:49:01 +01:00
20c4e49fe1
Refactoring of the Pebble Health steps data receiver.
...
Added logic to deal with pebble health sleep data.
Added database helper to change the type of a range of samples (needed for sleep data).
Fixes to the Pebble Health sample provider.
2016-02-09 17:52:21 +01:00
d62946df63
Pebble: some minor code cleanups regarding health
2016-02-09 01:31:41 +01:00
93db073538
Pebble: try to fix health code, might be broken, cant test
2016-02-09 00:56:16 +01:00
12a5b53f00
Pebble: Merge DatalogHandler and DataLog session
...
Also:
- pass the length of the payload and not of the whole datalog buffer to handleMessage(), simplifying DatalogSessionHealth::handleMessage()
2016-02-09 00:49:42 +01:00
b01a517813
Pebble: fix hexdump for health datalog
2016-02-08 23:33:05 +01:00
0c4e606e74
Pebble: rename BLOBDB_HEALTH to BLOBDB_PREFERENCES and encodeSaneDistanceUnit to encodeSetSaneDistanceUnit
...
Also allow to set insane units in the method
2016-02-07 21:59:14 +01:00
10b5c571bb
Use Kilometers as distance unit
2016-02-07 16:44:16 +01:00
2f8207abf9
Initial support for reading pebble health steps/activity data.
2016-02-07 09:27:51 +01:00
03ad7f5a24
Do not enable insights on the watch. Add notice about health activation to changelog.
2016-02-06 21:38:55 +01:00
59d6553c54
Pebble: fix stupid bug that broke active reconnection
2016-02-06 19:35:49 +01:00
85bad9abf5
Pebble: store information about datalog sessions (uuid, item type, length, tag)
...
... and log them if data comes in from a known id.
Also request open sessions on connect.
And last but not least hex dump data which might be from Health (the tags that I never see on Aplite but always on Basalt)
2016-02-03 23:27:35 +01:00
493fcfc853
Pebble: improve datalog output
2016-02-03 20:23:56 +01:00
baf5eee72f
Refactored the User Activity-tracking related preferences.
...
Created a new device-independent class ActivityUser to hold the data
Moved the constants from the miband constant class to the ActivityUser class
Removed the miband-specific in favor of common-prefixed preferences (with upgrade support for legacy values)
Changed the way the gender is stored to an integer value
Removed the hardcoded default values for user data in favor of static fields of the ActivityUser class
2016-02-02 17:33:24 +01:00
5b016e2577
WIP, read the miband user information for the time being.
2016-01-29 17:45:35 +01:00
8e7dc18fa8
Merge branch 'master' into feature-weather
2016-01-28 12:00:47 +01:00
9f2a7f5448
actual deletetion of the Health app.
...
It brings the health watchapp back to the pristine state "you need pebble health in order to use this app". The data, however, is not deleted!
2016-01-28 11:59:23 +01:00
e7c93ca1c3
Merge remote-tracking branch 'origin/master' into feature-weather
2016-01-28 11:11:20 +01:00
33cf76172b
Pebble: add hack to enable and maybe disable Health from the App Manager activity
2016-01-27 23:02:09 +01:00
666c53a1e4
Pebble: make encodeBlobDB accept Strings and UUIDS as keys, use it for Heath activation
2016-01-26 10:48:50 +01:00
7ba3a874a2
Message to activate Pebble Health, possibly.
2016-01-25 23:15:19 +01:00
3d3643ece3
Add weather to PebStyle as well.
2016-01-22 21:04:01 +01:00
a72373c17c
move PebbleContentProvider.java
2016-01-22 20:38:44 +01:00
b9c1332442
Testing content provdider
2016-01-22 20:21:18 +01:00
7ba156da62
Try to support MarioTime.
...
Does not work :/
2016-01-10 20:12:52 +01:00
4bb78722b5
Merge branch 'master' of https://github.com/Freeyourgadget/Gadgetbridge into feature-weather
2016-01-09 18:48:39 +01:00
0b53f60b0d
Pebble: EXPERIMENTAL support for replying to wearable notifications
...
Tested with Signal, more could work.
2016-01-09 17:54:17 +01:00
46bbab7df0
rename IDSenderLookup to LimitedQueue and store Object instead of String
2016-01-09 16:07:22 +01:00
ae5417b9cc
Avoid NPEs when aborting an erroneous sync #205
2016-01-07 00:33:20 +01:00
3d389f31a3
fix force close when weather hasn't been parsed yet, use the yahoo codes for this watchface, as required
2016-01-05 16:05:12 +01:00
c7c723134e
Add weather singleton (to store the whole data passed by weather notification).
...
Add weather info for TimeStylePebble.
Add further fields to the ParcelableWeather class.
Add reverse mapping to ParcelableWeather to get back the original OpenWeatherMap API condition codes.
2016-01-03 18:28:32 +01:00
1f1ac8cf37
Merge branch 'master' of https://github.com/Freeyourgadget/Gadgetbridge into feature-weather
2016-01-03 16:36:09 +01:00
50cd5b2629
Pebble: Fix regression which freezes Gadgetbridge when disconnecting via long-press menu
2016-01-02 00:30:11 +01:00
d358ed81d2
Pebble: Display a failure if we cannot map a notification id back to a Phone number when replying to an SMS
2015-12-31 01:43:00 +01:00
890016d652
Pebble: Fix crash when turning off bluetooth when connected on Android 6.0
2015-12-31 01:13:48 +01:00
e533fdbaa6
Pebble: actually display current whether in WeatherNeat
2015-12-29 22:10:38 +01:00
1cbe965802
Add analog+digital settings
2015-12-29 10:45:14 +01:00
f9122bc674
send the calendar events each time the time is sent to miband, until we have a common strategy (e.g. EventHandler).
2015-12-29 10:01:32 +01:00
1d9e1d7caf
Fix possible race condition when availableSlots == 3
...
(There are two difficult things...)
2015-12-29 09:18:02 +01:00
e3d0c63676
fix PebStyle color
2015-12-27 21:39:46 +01:00
2caef02309
fix typo :/
2015-12-27 19:16:56 +01:00
11e02fbf5f
Pebble: add experimental reconnect support for standby-mode on firmware 3.x
...
- You should also set reconnect attempts to 0 in preferences when using this.
- It also works when you set flight mode on the pebble, then wait for about 5 minutes and turn BT back on
- Pebble FW 2.x support ist completely untested.
2015-12-27 19:11:40 +01:00
3ee418a45b
Implement pushing messages upon watchapp start.
...
This watchface is used as example: https://github.com/ygalanter/PebStyle because it doesn't initiate a connection like others do.
At the moment this is more a proof of concept^W^W^Wdirty hack then anything else.
2015-12-23 14:22:28 +01:00
5f189aedbd
Add support for some configuration options of TimeStylePebble watchface ( https://github.com/freakified/TimeStylePebble )
2015-12-23 09:04:01 +01:00
87739d94db
Pebble: unify FW 2.x and 3.x action decoding
2015-12-20 21:23:39 +01:00
a71c27d25e
Added subtitle to timeline pins
2015-12-20 19:50:48 +01:00
96e21dbf21
Pebble: fix "[Action]" being displayed as SMS action when no canned replies are defined
2015-12-20 00:58:14 +01:00
35c7ab6dde
PEbble: add database parameter to encodeBlobDBClear(), minor cleanups
2015-12-20 00:40:38 +01:00
5026cf269f
Added command to clear the DB on pebble.
2015-12-19 20:52:44 +01:00
4b29d63d4e
Pebble: more debugging
2015-12-19 20:30:46 +01:00
9fb2e1620e
Rename misnamed file.
2015-12-19 14:36:28 +01:00
6582ead01c
Add pebble health uuid.
2015-12-19 09:43:55 +01:00
7eabf1e603
spoof android app version to 3.8.1 (was 3.0.1)
2015-12-18 21:34:52 +01:00
89ef950c62
Add the feature to changelog.
...
Fix max index for alarms on miband.
2015-12-18 20:30:09 +01:00
5fb8c7bed8
Use the right column for sorting upcoming events.
...
Plus add forgotten getQueue
2015-12-18 18:49:29 +01:00
47a34bb7bf
Pebble: debug output for blobdb responses (get rid of unhandled endpoint -20005 messages)
2015-12-18 12:41:01 +01:00
c9dcf06529
Pebble: improve debug output
...
- decode apprunstate and systemmessage endpoint messages
- prevent error messages by not using appmanager endpoint on firmware 3.x (it is gone)
2015-12-17 23:09:52 +01:00
036e92ee64
Implement sending the upcoming events to the miband.
...
The reserved alarm slots are used for storing the upcoming events.
The method is not yet called anywhere.
2015-12-17 18:02:21 +01:00
f387f7c96b
increase canned replies from 8 to 16
...
NOTE:
Total allowed bytes for all replies = 512 - (reply count - 1)
TODO:
- check with Firmware 2.9.1
- remove last reply that exceeds the 512 bytes limit completly (else it will be partly truncated)
2015-12-17 00:05:42 +01:00
dfa85745e8
Send out SMS when replying with a canned response
...
Closes #121
2015-12-15 00:26:06 +01:00
de5f30ae97
WIP: Work towards SMS replies / canned replies, round 3
...
- put random id/phone number pair into limited lookup list (last 16 sms messages) when sms arrives
- lookup the phone number when replying from the a device
THIS STILL DOES NOT DO ANYTHING USEFUL
2015-12-14 23:31:31 +01:00
14f8929439
Pebble: fix decoding strings in appmessages from the pebble
...
This fixes sending SMS from "Dialer for Pebble"
2015-12-14 00:05:14 +01:00
e5cf22bda6
WIP: Work towards SMS replies / canned replies, round 2
...
- parse the reply string in PebbleProtocol
- put replies into GBDeviceEvents
- display a toast in AbstractDeviceSupport, containing the reply
THIS STILL DOES NOT DO ANYTHING USEFUL
2015-12-13 22:43:53 +01:00
53fb63781e
WIP: Work towards SMS replies / canned replies
...
- Implement the PebbleProtocol side (2.x and 3.x)
- Add Preferences for canned replies
This can be tested by enabling untested features in Pebble Settings
It lets you see and select the replies set up in "Canned Repies" on the Pebble
You will get a "NOT IMPLENTED" message on your Pebble.
THIS DOES NOT ACTUALLY DO ANYTHING USEFUL YET.
2015-12-13 12:03:57 +01:00
854a7ee1ac
Avoid NPE when DeviceInfo is null
...
(when a notification comes in while we're connected, but not initialized yet)
2015-12-09 17:55:46 +01:00
794ae6d800
Well, we better return something usefull instead of just false :-]
...
Please try again #178
2015-12-09 17:54:54 +01:00
18726eca33
Pebble: Correct setting the timezone on firmware 3.x (pebble expects the "ID" eg. Europe/Berlin)
2015-12-08 14:59:24 +01:00
3ac00a004f
Pebble: Support installing .pbl (language files) on firmware 3.x
2015-12-08 12:07:14 +01:00
f20e11d517
Pebble: Increase maximum notification body length from 255 to 512 bytes on firmware 3.x
2015-12-07 12:25:34 +01:00
365ce61cb6
Support for firmware upgrade/downgrade on Mi 1A.
...
I hope I didn't break firmware upgrades on some Mi 1 models
other than mine (my hardware revision is 2).
Upgrades for Mi 1S are currently disabled, we need some brave
souls who can help us test this.
Closes #173
Also see: #169
2015-12-07 01:14:06 +01:00
6b053c4240
Make method protected, for future use
2015-12-07 01:13:47 +01:00
aa60ce4b56
Disable some notifications also for update-firmware operation
...
(introduce a common superclass to do that)
2015-12-07 01:13:47 +01:00
8cd6bf09a4
Fix NPE when an error occurs during activity synchronization
...
(activityDataStruct is null after handleActivityFetchFinish())
Also remove superfluous log statement -- toasts are logged as well.
2015-12-07 01:13:47 +01:00
b05cfc6aac
Pebble: fix crash on firmware 3.x when pebble requests a pbw that is not in Gadgetbridge's cache
2015-12-06 17:56:46 +01:00
bd0716ba58
Some more lint warnings fixed
2015-11-23 23:04:46 +01:00
81c2f657bd
Some lint fixes
2015-11-23 22:46:12 +01:00
a53f1c21eb
Simplification
2015-11-23 21:39:08 +01:00
1734e58f70
Pebble: Initial try to interpret sleep
2015-11-15 10:30:28 +01:00
952a383856
Use batched database commits for Mi Band activity samples
2015-11-01 21:41:36 +01:00
d4f070f0aa
Simplify external dir handling again -- prefer the primary dir
...
The primary external dir is often a user-partition on the internal
storage medium. This one is safe in multi-user environments.
The "removable storage" (sdcard) on the other hand can be read by
everyone. If the former is not available or not writable, use the
latter.
closes #153
2015-11-01 20:49:50 +01:00
54c316778b
Add exception to GB.toast() to get it logged
2015-10-25 00:13:32 +02:00
f287c04ad9
Pebble: simplify Misfit data parsing, since all assumptions seem to be wrong :/
2015-10-24 11:12:40 +09:00
e809c490dc
add method for batch inserts in ActivityDatabaseHandler. Closes #150
2015-10-23 22:13:12 +09:00
4aff3c8e8e
Pebble: try to improve Misfit steps parsing. Should be really close now.
2015-10-22 23:56:45 +09:00
c350f04fa9
Make "Locate device" work with newer firmware and MI1A. ( #136 )
...
Separate the different notification logic into distinct strategy classes.
2015-10-22 00:53:27 +02:00
44a36a5f1d
Pebble: First try to receive at least steps from the Misfit pebble watchapp
2015-10-21 23:11:59 +09:00
aa5749cd40
Some improvements to live activity.
...
Still rather inaccurate due to missing timing information.
2015-10-21 00:36:18 +02:00
4096e50681
Merge pull request #146 from sarg/master
...
Fix DeviceInfo checksum function.
2015-10-19 20:56:49 +02:00
cee03debbb
- add code to send the confirmation of the activity data transfer after a timeout.
...
==> This is currently commented out because it was done to solve #141 but while doing this #143 popped out.
- send a stop_sync message to the band if the data doesn't fit the buffer. This way the data remains on the band.
2015-10-19 16:17:03 +02:00
94cbf2f301
Fix DeviceInfo checksum function.
2015-10-19 15:02:56 +03:00
4e0fed8857
Improvements to how and when alarms are sent to the device
...
They are now sent whenever the Alarms activity is finished.
Display "All alarms disabled" when no alarm is enabled.
Unrelated: pass exceptions to GB.toast() where applicable.
2015-10-18 23:52:59 +02:00
ef15bf8ce8
Prevent firmware update for Mi Band 1A for now #136
2015-10-18 22:57:04 +02:00
dcd776e09a
Attempt to fix never finishing activity data fetching #142
...
(by disabling unrelated notifications)
2015-10-18 22:27:52 +02:00
7a44ea9596
Small comment
2015-10-18 21:33:07 +02:00
d57c6166b9
Fix pairing with MI1A
2015-10-18 21:54:22 +03:00
cd7acf6572
Pebble: Do not reboot after language file installation (does not seem to be necessary)
...
NOTE: This still does not work since crc calculation is missing
2015-10-07 00:44:29 +09:00
5860c4f4f9
Pebble: WIP support for flashing language files (.pbl)
...
NOTES:
- YOU SHOULD NOT TRY THIS YET ;)
- This was only tested with the unoffical japansese language pack
- Problably needs proper crc calculation (I just hardcoded the one for the japanese language pack)
2015-10-06 23:56:01 +09:00
d21b5e68b5
Pebble: Cleanup AppMessage handlers
2015-10-04 22:53:11 +09:00
321c0ff125
Log when we get bogus timestamps #91
2015-10-03 23:42:22 +02:00
586d959055
Merge branch 'master' into live-activity-data
2015-10-02 23:49:03 +02:00
baa2d0b27a
Displaying live activity data works well enough
2015-10-02 23:38:07 +02:00
d14ccf1c5c
Get device name from the BLE Standard Characteristic.
...
Always log read and notify characteristics, even if unhandled.
Changed Log statements for write action to make them clearer.
2015-09-28 16:47:43 +02:00
18f952250a
First working code for vibrations on firmware version 1.0.10.14
2015-09-28 12:53:42 +02:00
4250a002b4
Merge branch 'master' into live-activity-data
2015-09-27 00:16:04 +02:00
e3533a2b18
Pebble: Allow muting (blacklisting) Apps from within generic notifications on the watch
...
Closes #113
2015-09-25 00:53:40 +02:00
1d41f2f8e4
Refactoring
...
The notfification APIs now use NotificationSpec as their only parameter, which
contains all information (required and optional ones).
We no longer have separate methods and actions for SMS/EMAIL/GENERIC anymore.
The type of notification is important now, not how we received them technically.
2015-09-24 14:45:21 +02:00
e1ea8270ca
Add a progress notification for the activity data transfer.
2015-09-24 14:03:01 +02:00
5578691321
Fix progress bar
2015-09-24 14:02:33 +02:00
ab78d167d9
update CHANGELOG.md
2015-09-23 23:53:16 +02:00
3bb673d33a
Pebble Time Round support ("chalk" platform)
2015-09-23 23:20:49 +02:00
Andreas Shimokawa