gri3-wm/m4/ax_pthread.m4

486 lines
20 KiB
Plaintext
Raw Normal View History

Switch to autotools (GNU build system) This commit probably comes as a surprise to some, given that one of i3’s explicitly stated goals used to be “Do not use programs such as autoconf/automake for configuration and creating unreadable/broken makefiles”. I phrased this goal over 7 years ago, based largely on a grudge that I inherited, which — as I’ve realized in the meantime — was largely held against FOSS in general, and not actually nuanced criticism of autotools. In the meantime, I have come to realize that the knee-jerk reaction of “I could do this better!” (i.e. writing our own build system in this particular case) is usually misguided, and nowadays I strongly suggest trying hard to fix the existing system for the benefit of all existing and future users. Further, I recently got to experience the other side of the coin, as I packaged a new version of FreeRADIUS for Debian, which at the time of writing used autoconf in combination with boilermake, a custom make-based build system that only FreeRADIUS uses. Understanding the build system enough to fix issues and enable parallel compilation took me an entire day. That time is time which potentially every downstream maintainer needs to invest, and the resulting knowledge cannot be applied to any other project. Hence, I believe it’s a good idea switch i3 to autotools. Yes, it might be that particular features were easier to implement/understand in our custom Makefiles, and there might be individuals who have an easier time reading through our custom Makefiles than learning autotools. All of these considerations are outweighed by the benefits we get from using the same build system as literally thousands of other FOSS software packages. Aside from these somewhat philosophical considerations, there’s also practical improvements which this change brings us. See the “changes” section below. ┌──────────────────────────────────────────────────────────────────────────────┐ │ new workflow │ └──────────────────────────────────────────────────────────────────────────────┘ You can now build i3 like you build any other software package which uses autotools. Here’s a memory refresher: autoreconf -fi mkdir -p build && cd build ../configure make -j8 (The autoreconf -fi step is unnecessary if you are building from a release tarball, but shouldn’t hurt either.) ┌──────────────────────────────────────────────────────────────────────────────┐ │ recommended reading │ └──────────────────────────────────────────────────────────────────────────────┘ I very much recommend reading “A Practitioner's Guide to GNU Autoconf, Automake, and Libtool” by John Calcote (https://www.nostarch.com/autotools.htm). That book is from 2010 and, AFAICT, is the most up to date comprehensive description of autotools. Do not read older documentation. In particular, if a document you’re reading mentions configure.in (deprecated filename) or recursive make (now considered harmful), it’s likely outdated. ┌──────────────────────────────────────────────────────────────────────────────┐ │ changes │ └──────────────────────────────────────────────────────────────────────────────┘ This commit implements the following new functionality/changes in behavior: • We use the AX_ENABLE_BUILDDIR macro to enforce builds happening in a separate directory. This is a prerequisite for the AX_EXTEND_SRCDIR macro and building in a separate directory is common practice anyway. In case this causes any trouble when packaging i3 for your distribution, please let me know. • “make check” runs the i3 testsuite. You can still use ./testcases/complete-run.pl to get the interactive progress output. • “make distcheck” (runs testsuite on “make dist” result, tiny bit quicker feedback cycle than waiting for the travis build to catch the issue). • “make uninstall” (occasionally requested by users who compile from source) • “make” will build manpages/docs by default if the tools are installed. Conversely, manpages/docs are not tried to be built for users who don’t want to install all these dependencies to get started hacking on i3. • non-release builds will enable address sanitizer by default. Use the --disable-sanitizers configure option to turn off all sanitizers, and see --help for available sanitizers. • Support for pre-compiled headers (PCH) has been dropped for now in the interest of simplicitly. Maybe we can re-add it later. • coverage reports are now generated using “make check-code-coverage”, which requires specifying --enable-code-coverage when calling configure. ┌──────────────────────────────────────────────────────────────────────────────┐ │ build system feature parity/testing │ └──────────────────────────────────────────────────────────────────────────────┘ In addition to what’s described above, I tested the following features: • “make install” installs the same files (plus documentation and manpages) cd i3-old && make install PREFIX=/tmp/inst/old cd i3-new && ./configure --prefix=/tmp/inst/new cd /tmp/inst (cd old && for f in $(find); do [ -e "../new/$f" ] || echo "$f missing"; done) • make dist generates a tarball which includes the same files cd i3-old && make dist cd i3-new/x86_64-pc-linux-gnu && make dist colordiff -u <(tar tf i3-old/i3-4.12.tar.bz2 | sort) \ <(tar tf i3-new/x86_64-pc-linux-gnu/i3-4.12.tar.gz | sort) There are some expected differences: • Some files have been renamed (e.g. the new etc/ and share/ subdirectories) • Some files will now be generated at build-time, so only their corresponding .in file is shipped (e.g. testcases/complete-run.pl) • The generated parser files are shipped in the dist tarball (they only depend on the parser-specs/* files, not on the target system) • autotools infrastructure is shipped (e.g. “configure”, “missing”, etc.) • DLOG and ELOG statements still produce the same file name in logfiles • Listing source code in gdb still works. • gdb backtraces contain the i3-<version> path component • release.sh still works • version embedding 1. git checkout shows “4.12-136-gf720023 (2016-10-10, branch "autotools")” 2. tarball of a git version shows “4.12-non-git” 3. release tarball shows 4.13 • debug mode is enabled by default for non-release builds • enabling verbose builds via V=1 ┌──────────────────────────────────────────────────────────────────────────────┐ │ speed │ └──────────────────────────────────────────────────────────────────────────────┘ There is no noticeable difference in compilation speed itself (of binaries, documentation and manpages): i3-old $ time make all docs mans -j8 make all docs mans -j8 28.92s user 2.15s system 640% cpu 4.852 total i3-new $ time make -j8 make -j8 27.08s user 1.92s system 620% cpu 4.669 total In terms of one-time costs: configuring the build system (../configure) takes about 2.7s on my machine, generating the build system (autoreconf -fi) takes about 3.1s on my machine. ┌──────────────────────────────────────────────────────────────────────────────┐ │ m4 macros │ └──────────────────────────────────────────────────────────────────────────────┘ All files in m4/ have been copied from the autoconf-archive package in version b6aeb1988f4b6c78bf39d97b6c4f6e1d594d59b9 and should be updated whenever they change. This commit has been tested with autoconf 2.69 and automake 1.15.
2016-10-07 13:48:26 +02:00
# ===========================================================================
# http://www.gnu.org/software/autoconf-archive/ax_pthread.html
# ===========================================================================
#
# SYNOPSIS
#
# AX_PTHREAD([ACTION-IF-FOUND[, ACTION-IF-NOT-FOUND]])
#
# DESCRIPTION
#
# This macro figures out how to build C programs using POSIX threads. It
# sets the PTHREAD_LIBS output variable to the threads library and linker
# flags, and the PTHREAD_CFLAGS output variable to any special C compiler
# flags that are needed. (The user can also force certain compiler
# flags/libs to be tested by setting these environment variables.)
#
# Also sets PTHREAD_CC to any special C compiler that is needed for
# multi-threaded programs (defaults to the value of CC otherwise). (This
# is necessary on AIX to use the special cc_r compiler alias.)
#
# NOTE: You are assumed to not only compile your program with these flags,
# but also to link with them as well. For example, you might link with
# $PTHREAD_CC $CFLAGS $PTHREAD_CFLAGS $LDFLAGS ... $PTHREAD_LIBS $LIBS
#
# If you are only building threaded programs, you may wish to use these
# variables in your default LIBS, CFLAGS, and CC:
#
# LIBS="$PTHREAD_LIBS $LIBS"
# CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
# CC="$PTHREAD_CC"
#
# In addition, if the PTHREAD_CREATE_JOINABLE thread-attribute constant
# has a nonstandard name, this macro defines PTHREAD_CREATE_JOINABLE to
# that name (e.g. PTHREAD_CREATE_UNDETACHED on AIX).
#
# Also HAVE_PTHREAD_PRIO_INHERIT is defined if pthread is found and the
# PTHREAD_PRIO_INHERIT symbol is defined when compiling with
# PTHREAD_CFLAGS.
#
# ACTION-IF-FOUND is a list of shell commands to run if a threads library
# is found, and ACTION-IF-NOT-FOUND is a list of commands to run it if it
# is not found. If ACTION-IF-FOUND is not specified, the default action
# will define HAVE_PTHREAD.
#
# Please let the authors know if this macro fails on any platform, or if
# you have any other suggestions or comments. This macro was based on work
# by SGJ on autoconf scripts for FFTW (http://www.fftw.org/) (with help
# from M. Frigo), as well as ac_pthread and hb_pthread macros posted by
# Alejandro Forero Cuervo to the autoconf macro repository. We are also
# grateful for the helpful feedback of numerous users.
#
# Updated for Autoconf 2.68 by Daniel Richard G.
#
# LICENSE
#
# Copyright (c) 2008 Steven G. Johnson <stevenj@alum.mit.edu>
# Copyright (c) 2011 Daniel Richard G. <skunk@iSKUNK.ORG>
#
# This program is free software: you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the
# Free Software Foundation, either version 3 of the License, or (at your
# option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program. If not, see <http://www.gnu.org/licenses/>.
#
# As a special exception, the respective Autoconf Macro's copyright owner
# gives unlimited permission to copy, distribute and modify the configure
# scripts that are the output of Autoconf when processing the Macro. You
# need not follow the terms of the GNU General Public License when using
# or distributing such scripts, even though portions of the text of the
# Macro appear in them. The GNU General Public License (GPL) does govern
# all other use of the material that constitutes the Autoconf Macro.
#
# This special exception to the GPL applies to versions of the Autoconf
# Macro released by the Autoconf Archive. When you make and distribute a
# modified version of the Autoconf Macro, you may extend this special
# exception to the GPL to apply to your modified version as well.
#serial 23
AU_ALIAS([ACX_PTHREAD], [AX_PTHREAD])
AC_DEFUN([AX_PTHREAD], [
AC_REQUIRE([AC_CANONICAL_HOST])
AC_REQUIRE([AC_PROG_CC])
AC_REQUIRE([AC_PROG_SED])
AC_LANG_PUSH([C])
ax_pthread_ok=no
# We used to check for pthread.h first, but this fails if pthread.h
# requires special compiler flags (e.g. on Tru64 or Sequent).
# It gets checked for in the link test anyway.
# First of all, check if the user has set any of the PTHREAD_LIBS,
# etcetera environment variables, and if threads linking works using
# them:
if test "x$PTHREAD_CFLAGS$PTHREAD_LIBS" != "x"; then
ax_pthread_save_CC="$CC"
ax_pthread_save_CFLAGS="$CFLAGS"
ax_pthread_save_LIBS="$LIBS"
AS_IF([test "x$PTHREAD_CC" != "x"], [CC="$PTHREAD_CC"])
CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
LIBS="$PTHREAD_LIBS $LIBS"
AC_MSG_CHECKING([for pthread_join using $CC $PTHREAD_CFLAGS $PTHREAD_LIBS])
AC_LINK_IFELSE([AC_LANG_CALL([], [pthread_join])], [ax_pthread_ok=yes])
AC_MSG_RESULT([$ax_pthread_ok])
if test "x$ax_pthread_ok" = "xno"; then
PTHREAD_LIBS=""
PTHREAD_CFLAGS=""
fi
CC="$ax_pthread_save_CC"
CFLAGS="$ax_pthread_save_CFLAGS"
LIBS="$ax_pthread_save_LIBS"
fi
# We must check for the threads library under a number of different
# names; the ordering is very important because some systems
# (e.g. DEC) have both -lpthread and -lpthreads, where one of the
# libraries is broken (non-POSIX).
# Create a list of thread flags to try. Items starting with a "-" are
# C compiler flags, and other items are library names, except for "none"
# which indicates that we try without any flags at all, and "pthread-config"
# which is a program returning the flags for the Pth emulation library.
ax_pthread_flags="pthreads none -Kthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config"
# The ordering *is* (sometimes) important. Some notes on the
# individual items follow:
# pthreads: AIX (must check this before -lpthread)
# none: in case threads are in libc; should be tried before -Kthread and
# other compiler flags to prevent continual compiler warnings
# -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h)
# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads), Tru64
# (Note: HP C rejects this with "bad form for `-t' option")
# -pthreads: Solaris/gcc (Note: HP C also rejects)
# -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it
# doesn't hurt to check since this sometimes defines pthreads and
# -D_REENTRANT too), HP C (must be checked before -lpthread, which
# is present but should not be used directly; and before -mthreads,
# because the compiler interprets this as "-mt" + "-hreads")
# -mthreads: Mingw32/gcc, Lynx/gcc
# pthread: Linux, etcetera
# --thread-safe: KAI C++
# pthread-config: use pthread-config program (for GNU Pth library)
case $host_os in
freebsd*)
# -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able)
# lthread: LinuxThreads port on FreeBSD (also preferred to -pthread)
ax_pthread_flags="-kthread lthread $ax_pthread_flags"
;;
hpux*)
# From the cc(1) man page: "[-mt] Sets various -D flags to enable
# multi-threading and also sets -lpthread."
ax_pthread_flags="-mt -pthread pthread $ax_pthread_flags"
;;
openedition*)
# IBM z/OS requires a feature-test macro to be defined in order to
# enable POSIX threads at all, so give the user a hint if this is
# not set. (We don't define these ourselves, as they can affect
# other portions of the system API in unpredictable ways.)
AC_EGREP_CPP([AX_PTHREAD_ZOS_MISSING],
[
# if !defined(_OPEN_THREADS) && !defined(_UNIX03_THREADS)
AX_PTHREAD_ZOS_MISSING
# endif
],
[AC_MSG_WARN([IBM z/OS requires -D_OPEN_THREADS or -D_UNIX03_THREADS to enable pthreads support.])])
;;
solaris*)
# On Solaris (at least, for some versions), libc contains stubbed
# (non-functional) versions of the pthreads routines, so link-based
# tests will erroneously succeed. (N.B.: The stubs are missing
# pthread_cleanup_push, or rather a function called by this macro,
# so we could check for that, but who knows whether they'll stub
# that too in a future libc.) So we'll check first for the
# standard Solaris way of linking pthreads (-mt -lpthread).
ax_pthread_flags="-mt,pthread pthread $ax_pthread_flags"
;;
esac
# GCC generally uses -pthread, or -pthreads on some platforms (e.g. SPARC)
AS_IF([test "x$GCC" = "xyes"],
[ax_pthread_flags="-pthread -pthreads $ax_pthread_flags"])
# The presence of a feature test macro requesting re-entrant function
# definitions is, on some systems, a strong hint that pthreads support is
# correctly enabled
case $host_os in
darwin* | hpux* | linux* | osf* | solaris*)
ax_pthread_check_macro="_REENTRANT"
;;
aix*)
ax_pthread_check_macro="_THREAD_SAFE"
;;
*)
ax_pthread_check_macro="--"
;;
esac
AS_IF([test "x$ax_pthread_check_macro" = "x--"],
[ax_pthread_check_cond=0],
[ax_pthread_check_cond="!defined($ax_pthread_check_macro)"])
# Are we compiling with Clang?
AC_CACHE_CHECK([whether $CC is Clang],
[ax_cv_PTHREAD_CLANG],
[ax_cv_PTHREAD_CLANG=no
# Note that Autoconf sets GCC=yes for Clang as well as GCC
if test "x$GCC" = "xyes"; then
AC_EGREP_CPP([AX_PTHREAD_CC_IS_CLANG],
[/* Note: Clang 2.7 lacks __clang_[a-z]+__ */
# if defined(__clang__) && defined(__llvm__)
AX_PTHREAD_CC_IS_CLANG
# endif
],
[ax_cv_PTHREAD_CLANG=yes])
fi
])
ax_pthread_clang="$ax_cv_PTHREAD_CLANG"
ax_pthread_clang_warning=no
# Clang needs special handling, because older versions handle the -pthread
# option in a rather... idiosyncratic way
if test "x$ax_pthread_clang" = "xyes"; then
# Clang takes -pthread; it has never supported any other flag
# (Note 1: This will need to be revisited if a system that Clang
# supports has POSIX threads in a separate library. This tends not
# to be the way of modern systems, but it's conceivable.)
# (Note 2: On some systems, notably Darwin, -pthread is not needed
# to get POSIX threads support; the API is always present and
# active. We could reasonably leave PTHREAD_CFLAGS empty. But
# -pthread does define _REENTRANT, and while the Darwin headers
# ignore this macro, third-party headers might not.)
PTHREAD_CFLAGS="-pthread"
PTHREAD_LIBS=
ax_pthread_ok=yes
# However, older versions of Clang make a point of warning the user
# that, in an invocation where only linking and no compilation is
# taking place, the -pthread option has no effect ("argument unused
# during compilation"). They expect -pthread to be passed in only
# when source code is being compiled.
#
# Problem is, this is at odds with the way Automake and most other
# C build frameworks function, which is that the same flags used in
# compilation (CFLAGS) are also used in linking. Many systems
# supported by AX_PTHREAD require exactly this for POSIX threads
# support, and in fact it is often not straightforward to specify a
# flag that is used only in the compilation phase and not in
# linking. Such a scenario is extremely rare in practice.
#
# Even though use of the -pthread flag in linking would only print
# a warning, this can be a nuisance for well-run software projects
# that build with -Werror. So if the active version of Clang has
# this misfeature, we search for an option to squash it.
AC_CACHE_CHECK([whether Clang needs flag to prevent "argument unused" warning when linking with -pthread],
[ax_cv_PTHREAD_CLANG_NO_WARN_FLAG],
[ax_cv_PTHREAD_CLANG_NO_WARN_FLAG=unknown
# Create an alternate version of $ac_link that compiles and
# links in two steps (.c -> .o, .o -> exe) instead of one
# (.c -> exe), because the warning occurs only in the second
# step
ax_pthread_save_ac_link="$ac_link"
ax_pthread_sed='s/conftest\.\$ac_ext/conftest.$ac_objext/g'
ax_pthread_link_step=`$as_echo "$ac_link" | sed "$ax_pthread_sed"`
ax_pthread_2step_ac_link="($ac_compile) && (echo ==== >&5) && ($ax_pthread_link_step)"
ax_pthread_save_CFLAGS="$CFLAGS"
for ax_pthread_try in '' -Qunused-arguments -Wno-unused-command-line-argument unknown; do
AS_IF([test "x$ax_pthread_try" = "xunknown"], [break])
CFLAGS="-Werror -Wunknown-warning-option $ax_pthread_try -pthread $ax_pthread_save_CFLAGS"
ac_link="$ax_pthread_save_ac_link"
AC_LINK_IFELSE([AC_LANG_SOURCE([[int main(void){return 0;}]])],
[ac_link="$ax_pthread_2step_ac_link"
AC_LINK_IFELSE([AC_LANG_SOURCE([[int main(void){return 0;}]])],
[break])
])
done
ac_link="$ax_pthread_save_ac_link"
CFLAGS="$ax_pthread_save_CFLAGS"
AS_IF([test "x$ax_pthread_try" = "x"], [ax_pthread_try=no])
ax_cv_PTHREAD_CLANG_NO_WARN_FLAG="$ax_pthread_try"
])
case "$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" in
no | unknown) ;;
*) PTHREAD_CFLAGS="$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG $PTHREAD_CFLAGS" ;;
esac
fi # $ax_pthread_clang = yes
if test "x$ax_pthread_ok" = "xno"; then
for ax_pthread_try_flag in $ax_pthread_flags; do
case $ax_pthread_try_flag in
none)
AC_MSG_CHECKING([whether pthreads work without any flags])
;;
-mt,pthread)
AC_MSG_CHECKING([whether pthreads work with -mt -lpthread])
PTHREAD_CFLAGS="-mt"
PTHREAD_LIBS="-lpthread"
;;
-*)
AC_MSG_CHECKING([whether pthreads work with $ax_pthread_try_flag])
PTHREAD_CFLAGS="$ax_pthread_try_flag"
;;
pthread-config)
AC_CHECK_PROG([ax_pthread_config], [pthread-config], [yes], [no])
AS_IF([test "x$ax_pthread_config" = "xno"], [continue])
PTHREAD_CFLAGS="`pthread-config --cflags`"
PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`"
;;
*)
AC_MSG_CHECKING([for the pthreads library -l$ax_pthread_try_flag])
PTHREAD_LIBS="-l$ax_pthread_try_flag"
;;
esac
ax_pthread_save_CFLAGS="$CFLAGS"
ax_pthread_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
LIBS="$PTHREAD_LIBS $LIBS"
# Check for various functions. We must include pthread.h,
# since some functions may be macros. (On the Sequent, we
# need a special flag -Kthread to make this header compile.)
# We check for pthread_join because it is in -lpthread on IRIX
# while pthread_create is in libc. We check for pthread_attr_init
# due to DEC craziness with -lpthreads. We check for
# pthread_cleanup_push because it is one of the few pthread
# functions on Solaris that doesn't have a non-functional libc stub.
# We try pthread_create on general principles.
AC_LINK_IFELSE([AC_LANG_PROGRAM([#include <pthread.h>
# if $ax_pthread_check_cond
# error "$ax_pthread_check_macro must be defined"
# endif
static void routine(void *a) { a = 0; }
static void *start_routine(void *a) { return a; }],
[pthread_t th; pthread_attr_t attr;
pthread_create(&th, 0, start_routine, 0);
pthread_join(th, 0);
pthread_attr_init(&attr);
pthread_cleanup_push(routine, 0);
pthread_cleanup_pop(0) /* ; */])],
[ax_pthread_ok=yes],
[])
CFLAGS="$ax_pthread_save_CFLAGS"
LIBS="$ax_pthread_save_LIBS"
AC_MSG_RESULT([$ax_pthread_ok])
AS_IF([test "x$ax_pthread_ok" = "xyes"], [break])
PTHREAD_LIBS=""
PTHREAD_CFLAGS=""
done
fi
# Various other checks:
if test "x$ax_pthread_ok" = "xyes"; then
ax_pthread_save_CFLAGS="$CFLAGS"
ax_pthread_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
LIBS="$PTHREAD_LIBS $LIBS"
# Detect AIX lossage: JOINABLE attribute is called UNDETACHED.
AC_CACHE_CHECK([for joinable pthread attribute],
[ax_cv_PTHREAD_JOINABLE_ATTR],
[ax_cv_PTHREAD_JOINABLE_ATTR=unknown
for ax_pthread_attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do
AC_LINK_IFELSE([AC_LANG_PROGRAM([#include <pthread.h>],
[int attr = $ax_pthread_attr; return attr /* ; */])],
[ax_cv_PTHREAD_JOINABLE_ATTR=$ax_pthread_attr; break],
[])
done
])
AS_IF([test "x$ax_cv_PTHREAD_JOINABLE_ATTR" != "xunknown" && \
test "x$ax_cv_PTHREAD_JOINABLE_ATTR" != "xPTHREAD_CREATE_JOINABLE" && \
test "x$ax_pthread_joinable_attr_defined" != "xyes"],
[AC_DEFINE_UNQUOTED([PTHREAD_CREATE_JOINABLE],
[$ax_cv_PTHREAD_JOINABLE_ATTR],
[Define to necessary symbol if this constant
uses a non-standard name on your system.])
ax_pthread_joinable_attr_defined=yes
])
AC_CACHE_CHECK([whether more special flags are required for pthreads],
[ax_cv_PTHREAD_SPECIAL_FLAGS],
[ax_cv_PTHREAD_SPECIAL_FLAGS=no
case $host_os in
solaris*)
ax_cv_PTHREAD_SPECIAL_FLAGS="-D_POSIX_PTHREAD_SEMANTICS"
;;
esac
])
AS_IF([test "x$ax_cv_PTHREAD_SPECIAL_FLAGS" != "xno" && \
test "x$ax_pthread_special_flags_added" != "xyes"],
[PTHREAD_CFLAGS="$ax_cv_PTHREAD_SPECIAL_FLAGS $PTHREAD_CFLAGS"
ax_pthread_special_flags_added=yes])
AC_CACHE_CHECK([for PTHREAD_PRIO_INHERIT],
[ax_cv_PTHREAD_PRIO_INHERIT],
[AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <pthread.h>]],
[[int i = PTHREAD_PRIO_INHERIT;]])],
[ax_cv_PTHREAD_PRIO_INHERIT=yes],
[ax_cv_PTHREAD_PRIO_INHERIT=no])
])
AS_IF([test "x$ax_cv_PTHREAD_PRIO_INHERIT" = "xyes" && \
test "x$ax_pthread_prio_inherit_defined" != "xyes"],
[AC_DEFINE([HAVE_PTHREAD_PRIO_INHERIT], [1], [Have PTHREAD_PRIO_INHERIT.])
ax_pthread_prio_inherit_defined=yes
])
CFLAGS="$ax_pthread_save_CFLAGS"
LIBS="$ax_pthread_save_LIBS"
# More AIX lossage: compile with *_r variant
if test "x$GCC" != "xyes"; then
case $host_os in
aix*)
AS_CASE(["x/$CC"],
[x*/c89|x*/c89_128|x*/c99|x*/c99_128|x*/cc|x*/cc128|x*/xlc|x*/xlc_v6|x*/xlc128|x*/xlc128_v6],
[#handle absolute path differently from PATH based program lookup
AS_CASE(["x$CC"],
[x/*],
[AS_IF([AS_EXECUTABLE_P([${CC}_r])],[PTHREAD_CC="${CC}_r"])],
[AC_CHECK_PROGS([PTHREAD_CC],[${CC}_r],[$CC])])])
;;
esac
fi
fi
test -n "$PTHREAD_CC" || PTHREAD_CC="$CC"
AC_SUBST([PTHREAD_LIBS])
AC_SUBST([PTHREAD_CFLAGS])
AC_SUBST([PTHREAD_CC])
# Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND:
if test "x$ax_pthread_ok" = "xyes"; then
ifelse([$1],,[AC_DEFINE([HAVE_PTHREAD],[1],[Define if you have POSIX threads libraries and header files.])],[$1])
:
else
ax_pthread_ok=no
$2
fi
AC_LANG_POP
])dnl AX_PTHREAD