The default i3 config uses the `exec` command without `--no-startup-id`
to launch:
1. i3-nagbar
4cba9fcbda/etc/config (L150)
2. i3-config-wizard
4cba9fcbda/etc/config (L194)
A user that opens i3 for the first time will be greeted with a "loading"
cursor because of i3-config-wizard.
These are the changes that clang-format 6.0.1 makes to the codebase that
clang-format-3.8 doesn't change back.
Useful for those that use a more recent version of clang-format in their
local machines.
Add --modifier flag to i3-config-wizard
The --modifier flag accepts either alt or win, and will generate the
configuration file without opening a window.
Also adds i3-config-wizard's flags to the manpage.
Fixes#3136.
Thanks to @psychon for pointing this out during the review of PR #2624.
This commit extends this change to all other occurences of Expose events
within i3.
Including config.h is necessary to get e.g. the _GNU_SOURCE define and
any other definitions that autoconf declares. Hence, config.h needs to
be included as the first header in each file.
This is done either via:
1. Including "common.h" (i3bar)
2. Including "libi3.h"
3. Including "all.h" (i3)
4. Including <config.h> directly
Also remove now-unused I3__FILE__, add copyright/license statement
where missing and switch include/all.h to #pragma once.
This commit probably comes as a surprise to some, given that one of i3’s
explicitly stated goals used to be “Do not use programs such as
autoconf/automake for configuration and creating unreadable/broken makefiles”.
I phrased this goal over 7 years ago, based largely on a grudge that I
inherited, which — as I’ve realized in the meantime — was largely held against
FOSS in general, and not actually nuanced criticism of autotools.
In the meantime, I have come to realize that the knee-jerk reaction of “I could
do this better!” (i.e. writing our own build system in this particular case) is
usually misguided, and nowadays I strongly suggest trying hard to fix the
existing system for the benefit of all existing and future users.
Further, I recently got to experience the other side of the coin, as I packaged
a new version of FreeRADIUS for Debian, which at the time of writing used
autoconf in combination with boilermake, a custom make-based build system that
only FreeRADIUS uses. Understanding the build system enough to fix issues and
enable parallel compilation took me an entire day. That time is time which
potentially every downstream maintainer needs to invest, and the resulting
knowledge cannot be applied to any other project.
Hence, I believe it’s a good idea switch i3 to autotools. Yes, it might be that
particular features were easier to implement/understand in our custom
Makefiles, and there might be individuals who have an easier time reading
through our custom Makefiles than learning autotools. All of these
considerations are outweighed by the benefits we get from using the same build
system as literally thousands of other FOSS software packages.
Aside from these somewhat philosophical considerations, there’s also practical
improvements which this change brings us. See the “changes” section below.
┌──────────────────────────────────────────────────────────────────────────────┐
│ new workflow │
└──────────────────────────────────────────────────────────────────────────────┘
You can now build i3 like you build any other software package which uses
autotools. Here’s a memory refresher:
autoreconf -fi
mkdir -p build && cd build
../configure
make -j8
(The autoreconf -fi step is unnecessary if you are building from a release
tarball, but shouldn’t hurt either.)
┌──────────────────────────────────────────────────────────────────────────────┐
│ recommended reading │
└──────────────────────────────────────────────────────────────────────────────┘
I very much recommend reading “A Practitioner's Guide to GNU Autoconf,
Automake, and Libtool” by John Calcote (https://www.nostarch.com/autotools.htm).
That book is from 2010 and, AFAICT, is the most up to date comprehensive
description of autotools. Do not read older documentation. In particular, if a
document you’re reading mentions configure.in (deprecated filename) or
recursive make (now considered harmful), it’s likely outdated.
┌──────────────────────────────────────────────────────────────────────────────┐
│ changes │
└──────────────────────────────────────────────────────────────────────────────┘
This commit implements the following new functionality/changes in behavior:
• We use the AX_ENABLE_BUILDDIR macro to enforce builds happening in a separate
directory. This is a prerequisite for the AX_EXTEND_SRCDIR macro and building
in a separate directory is common practice anyway. In case this causes any
trouble when packaging i3 for your distribution, please let me know.
• “make check” runs the i3 testsuite.
You can still use ./testcases/complete-run.pl to get the interactive progress
output.
• “make distcheck” (runs testsuite on “make dist” result, tiny bit quicker
feedback cycle than waiting for the travis build to catch the issue).
• “make uninstall” (occasionally requested by users who compile from source)
• “make” will build manpages/docs by default if the tools are installed.
Conversely, manpages/docs are not tried to be built for users who don’t want
to install all these dependencies to get started hacking on i3.
• non-release builds will enable address sanitizer by default. Use the
--disable-sanitizers configure option to turn off all sanitizers, and see
--help for available sanitizers.
• Support for pre-compiled headers (PCH) has been dropped for now in the
interest of simplicitly. Maybe we can re-add it later.
• coverage reports are now generated using “make check-code-coverage”, which
requires specifying --enable-code-coverage when calling configure.
┌──────────────────────────────────────────────────────────────────────────────┐
│ build system feature parity/testing │
└──────────────────────────────────────────────────────────────────────────────┘
In addition to what’s described above, I tested the following features:
• “make install” installs the same files (plus documentation and manpages)
cd i3-old && make install PREFIX=/tmp/inst/old
cd i3-new && ./configure --prefix=/tmp/inst/new
cd /tmp/inst
(cd old && for f in $(find); do [ -e "../new/$f" ] || echo "$f missing"; done)
• make dist generates a tarball which includes the same files
cd i3-old && make dist
cd i3-new/x86_64-pc-linux-gnu && make dist
colordiff -u <(tar tf i3-old/i3-4.12.tar.bz2 | sort) \
<(tar tf i3-new/x86_64-pc-linux-gnu/i3-4.12.tar.gz | sort)
There are some expected differences:
• Some files have been renamed (e.g. the new etc/ and share/ subdirectories)
• Some files will now be generated at build-time, so only their corresponding
.in file is shipped (e.g. testcases/complete-run.pl)
• The generated parser files are shipped in the dist tarball (they only
depend on the parser-specs/* files, not on the target system)
• autotools infrastructure is shipped (e.g. “configure”, “missing”, etc.)
• DLOG and ELOG statements still produce the same file name in logfiles
• Listing source code in gdb still works.
• gdb backtraces contain the i3-<version> path component
• release.sh still works
• version embedding
1. git checkout shows “4.12-136-gf720023 (2016-10-10, branch "autotools")”
2. tarball of a git version shows “4.12-non-git”
3. release tarball shows 4.13
• debug mode is enabled by default for non-release builds
• enabling verbose builds via V=1
┌──────────────────────────────────────────────────────────────────────────────┐
│ speed │
└──────────────────────────────────────────────────────────────────────────────┘
There is no noticeable difference in compilation speed itself (of binaries,
documentation and manpages):
i3-old $ time make all docs mans -j8
make all docs mans -j8 28.92s user 2.15s system 640% cpu 4.852 total
i3-new $ time make -j8
make -j8 27.08s user 1.92s system 620% cpu 4.669 total
In terms of one-time costs:
configuring the build system (../configure) takes about 2.7s on my machine,
generating the build system (autoreconf -fi) takes about 3.1s on my machine.
┌──────────────────────────────────────────────────────────────────────────────┐
│ m4 macros │
└──────────────────────────────────────────────────────────────────────────────┘
All files in m4/ have been copied from the autoconf-archive package in version
b6aeb1988f4b6c78bf39d97b6c4f6e1d594d59b9 and should be updated whenever they
change.
This commit has been tested with autoconf 2.69 and automake 1.15.
Corrects the cases where the colorpixel is not 0xRRGGBB : we have to
use the full color_t struct to describe font colors, as Pango expects
RGB values and not an XCB colorpixel value.
* common.mk: use -lsocket -liconv -lgen on Illumos/Solaris
* mkdirp: return int and accept a mode argument
* use i3's mkdirp on everything except Illumos
The Makefiles should put binaries in $(EXEC_PREFIX) and
architecture-independent files in $(PREFIX). Also a user may have a
prefixed- pkg-config, as in the case of cross compiling on Exherbo
Linux, so respect the well-accepted $(PKG_CONFIG) variable for this
purpose.
This guarantees the whole visible area of the pixmap is reinitialized,
and ensures that the click bounding boxes are properly aligned with
the displayed text.
Not quite sure why there are so many differences. Perhaps we’ve gotten
out of the habit of running clang-format after every change.
I guess it’d be best to have a travis hook that runs clang-format for us
and reports any problems on pull requests.
This removes our last dependency on Xlib! :)
(Okay, an Xlib dependency still comes in through other libraries that we
link against, but it’s not us. Our code is simpler by this change and
uses one less connection to X11.)
This should be the last commit that formats a big bunch of files. From
here on, whenever I merge patches, I’ll run clang-format like described
in the title.
This has multiple effects:
1) The i3 codebase is now consistently formatted. clang-format uncovered
plenty of places where inconsistent code made it into our code base.
2) When writing code, you don’t need to think or worry about our coding
style. Write it in yours, then run clang-format-3.5
3) When submitting patches, we don’t need to argue about coding style.
The basic idea is that we don’t want to care about _how_ we write the
code, but _what_ it does :). The coding style that we use is defined in
the .clang-format config file and is based on the google style, but
adapted in such a way that the number of modifications to the i3 code
base is minimal.
This avoids flooding stdout every time some text (e.g. a window
decoration) is drawn, yet leaves the message in place when it’s actually
relevant (upon DPI changes).
fixes#1115
This removes code duplication, which will be useful for a subsequent
commit.
Furthermore, we now don’t open X11 connections unnecessarily in some
corner cases.
This adds some code duplication which we might remove in a future
refactoring or not. Depends on whether unifying the parsers actually
makes the code better or not. I suspect it doesn’t :-).
While this is a bit ugly, it makes the log messages end up where they
are supposed to: in the shmlog/stdout in case of i3 and on stdout in
case of utilities such as i3-input
Orestis Floros