The lookup order stated in the i3 manpage was is contratiction to the
actual lookup order, which was introduced with commit
bfa12a5819.
Since that commit (6.5 years ago) the "traditional" paths took precedence
over XDG_CONFIG paths.
This commit probably comes as a surprise to some, given that one of i3’s
explicitly stated goals used to be “Do not use programs such as
autoconf/automake for configuration and creating unreadable/broken makefiles”.
I phrased this goal over 7 years ago, based largely on a grudge that I
inherited, which — as I’ve realized in the meantime — was largely held against
FOSS in general, and not actually nuanced criticism of autotools.
In the meantime, I have come to realize that the knee-jerk reaction of “I could
do this better!” (i.e. writing our own build system in this particular case) is
usually misguided, and nowadays I strongly suggest trying hard to fix the
existing system for the benefit of all existing and future users.
Further, I recently got to experience the other side of the coin, as I packaged
a new version of FreeRADIUS for Debian, which at the time of writing used
autoconf in combination with boilermake, a custom make-based build system that
only FreeRADIUS uses. Understanding the build system enough to fix issues and
enable parallel compilation took me an entire day. That time is time which
potentially every downstream maintainer needs to invest, and the resulting
knowledge cannot be applied to any other project.
Hence, I believe it’s a good idea switch i3 to autotools. Yes, it might be that
particular features were easier to implement/understand in our custom
Makefiles, and there might be individuals who have an easier time reading
through our custom Makefiles than learning autotools. All of these
considerations are outweighed by the benefits we get from using the same build
system as literally thousands of other FOSS software packages.
Aside from these somewhat philosophical considerations, there’s also practical
improvements which this change brings us. See the “changes” section below.
┌──────────────────────────────────────────────────────────────────────────────┐
│ new workflow │
└──────────────────────────────────────────────────────────────────────────────┘
You can now build i3 like you build any other software package which uses
autotools. Here’s a memory refresher:
autoreconf -fi
mkdir -p build && cd build
../configure
make -j8
(The autoreconf -fi step is unnecessary if you are building from a release
tarball, but shouldn’t hurt either.)
┌──────────────────────────────────────────────────────────────────────────────┐
│ recommended reading │
└──────────────────────────────────────────────────────────────────────────────┘
I very much recommend reading “A Practitioner's Guide to GNU Autoconf,
Automake, and Libtool” by John Calcote (https://www.nostarch.com/autotools.htm).
That book is from 2010 and, AFAICT, is the most up to date comprehensive
description of autotools. Do not read older documentation. In particular, if a
document you’re reading mentions configure.in (deprecated filename) or
recursive make (now considered harmful), it’s likely outdated.
┌──────────────────────────────────────────────────────────────────────────────┐
│ changes │
└──────────────────────────────────────────────────────────────────────────────┘
This commit implements the following new functionality/changes in behavior:
• We use the AX_ENABLE_BUILDDIR macro to enforce builds happening in a separate
directory. This is a prerequisite for the AX_EXTEND_SRCDIR macro and building
in a separate directory is common practice anyway. In case this causes any
trouble when packaging i3 for your distribution, please let me know.
• “make check” runs the i3 testsuite.
You can still use ./testcases/complete-run.pl to get the interactive progress
output.
• “make distcheck” (runs testsuite on “make dist” result, tiny bit quicker
feedback cycle than waiting for the travis build to catch the issue).
• “make uninstall” (occasionally requested by users who compile from source)
• “make” will build manpages/docs by default if the tools are installed.
Conversely, manpages/docs are not tried to be built for users who don’t want
to install all these dependencies to get started hacking on i3.
• non-release builds will enable address sanitizer by default. Use the
--disable-sanitizers configure option to turn off all sanitizers, and see
--help for available sanitizers.
• Support for pre-compiled headers (PCH) has been dropped for now in the
interest of simplicitly. Maybe we can re-add it later.
• coverage reports are now generated using “make check-code-coverage”, which
requires specifying --enable-code-coverage when calling configure.
┌──────────────────────────────────────────────────────────────────────────────┐
│ build system feature parity/testing │
└──────────────────────────────────────────────────────────────────────────────┘
In addition to what’s described above, I tested the following features:
• “make install” installs the same files (plus documentation and manpages)
cd i3-old && make install PREFIX=/tmp/inst/old
cd i3-new && ./configure --prefix=/tmp/inst/new
cd /tmp/inst
(cd old && for f in $(find); do [ -e "../new/$f" ] || echo "$f missing"; done)
• make dist generates a tarball which includes the same files
cd i3-old && make dist
cd i3-new/x86_64-pc-linux-gnu && make dist
colordiff -u <(tar tf i3-old/i3-4.12.tar.bz2 | sort) \
<(tar tf i3-new/x86_64-pc-linux-gnu/i3-4.12.tar.gz | sort)
There are some expected differences:
• Some files have been renamed (e.g. the new etc/ and share/ subdirectories)
• Some files will now be generated at build-time, so only their corresponding
.in file is shipped (e.g. testcases/complete-run.pl)
• The generated parser files are shipped in the dist tarball (they only
depend on the parser-specs/* files, not on the target system)
• autotools infrastructure is shipped (e.g. “configure”, “missing”, etc.)
• DLOG and ELOG statements still produce the same file name in logfiles
• Listing source code in gdb still works.
• gdb backtraces contain the i3-<version> path component
• release.sh still works
• version embedding
1. git checkout shows “4.12-136-gf720023 (2016-10-10, branch "autotools")”
2. tarball of a git version shows “4.12-non-git”
3. release tarball shows 4.13
• debug mode is enabled by default for non-release builds
• enabling verbose builds via V=1
┌──────────────────────────────────────────────────────────────────────────────┐
│ speed │
└──────────────────────────────────────────────────────────────────────────────┘
There is no noticeable difference in compilation speed itself (of binaries,
documentation and manpages):
i3-old $ time make all docs mans -j8
make all docs mans -j8 28.92s user 2.15s system 640% cpu 4.852 total
i3-new $ time make -j8
make -j8 27.08s user 1.92s system 620% cpu 4.669 total
In terms of one-time costs:
configuring the build system (../configure) takes about 2.7s on my machine,
generating the build system (autoreconf -fi) takes about 3.1s on my machine.
┌──────────────────────────────────────────────────────────────────────────────┐
│ m4 macros │
└──────────────────────────────────────────────────────────────────────────────┘
All files in m4/ have been copied from the autoconf-archive package in version
b6aeb1988f4b6c78bf39d97b6c4f6e1d594d59b9 and should be updated whenever they
change.
This commit has been tested with autoconf 2.69 and automake 1.15.
We now build a docker base container based on debian sid (where the very
latest packages are available). That base container is updated once a
month, or whenever travis-build.Dockerfile or debian/control change, but
re-used for subsequent travis runs. While the initial build might take
up to 15 minutes, subsequent builds typically run in a minute or two.
All the different steps that we run on travis are now factored into
separate scripts in the travis/ directory.
Switching to docker should also help with issue #2174.
Rather than just toggling the fullscreen modes, allow to set them
directly with:
fullscreen enable|toggle [global]
fullscreen disable
For compatibility, retain the previous command and its toggling behavior:
fullscreen [global]
fixes#1120
I think instead of maintaining distribution-specific patches forever,
it’s a bit easier to have them applied upstream, especially since they
don’t break anything.
fixes#876
Harald mentioned he was surprised about the locales we recommend in the
.xsession example, so I’ve re-investigated.
Here is the test program I have used:
#include <stdio.h>
#include <locale.h>
int main() {
/* SUSv2 setlocale(3) says:
* Internationalised programs must call setlocale() to initiate
* a specific language operation. This can be done by calling
* setlocale() as follows: */
setlocale(LC_ALL, "");
printf("LC_NUMERIC is %s\n", setlocale(LC_NUMERIC, NULL));
}
Then, I have unset LANG and LC_*:
midna /tmp $ env | grep LANG
midna /tmp $ env | grep LC
midna /tmp $
Now, observe that LC_ALL overwrites all specific LC variables:
midna /tmp $ LC_ALL=de_DE.UTF-8 LC_NUMERIC=en_DK.UTF-8 ./localetest
LC_NUMERIC is de_DE.UTF-8
However, LANG does not:
midna /tmp $ LANG=de_DE.UTF-8 ./localetest
LC_NUMERIC is de_DE.UTF-8
midna /tmp $ LANG=de_DE.UTF-8 LC_NUMERIC=en_DK.UTF-8 ./localetest
LC_NUMERIC is en_DK.UTF-8
This is consistent with what perldoc perllocale says:
http://perldoc.perl.org/perllocale.html#ENVIRONMENT
Adaephon-GH