A race condition is possible. For example, if we first receive a
XCB_MOTION_NOTIFY event and then, while drain_drag_events is still
running, a XCB_BUTTON_RELEASE event the first event is never handled
because we return.
This fixes the flakiness of the tests in #3085.
This change only affects clients that are subscribed to events, which
should be the main cause of our problems.
In the common case (no buffered data) the behaviour doesn't change at
all: the message is sent directly, no ev_io / ev_timeout callback is
enabled. Once a write to a client's socket is not completed fully
(returns with EAGAIN error), we put the message in the tail of a queue
and init an ev_io callback and a corresponding timer. If the timer is
triggered first, the socket is closed and the client connection is
removed. If the socket becomes writeable before the timeout we either
reset the timer if we couldn't push all the buffered data or completely
remove it if everything was pushed.
We could also replace ipc_send_message() for all client connections in
i3, not just those subscribed to events.
Furthermore, we could limit the amount of messages stored and increase
the timeout (or use multiple timeouts): eg it's ok if a client is not
reading for 10 seconds and we are only holding 5KB of messages for them
but it is not ok if they are inactive for 5 seconds and we have 30MB of
messages held.
Closes#2999Closes#2539
This was introduced in 252db3b8c (#3245). That commit moved the
con_activate line inside the loop, meaning it wouldn't always be called.
When the mouse moved after a rename with focus_follows_mouse enabled,
check_crossing_screen_boundary (src/handlers.c:111) called
con_descend_focused that used the wrong focus order.
I also change con_activate to con_focus since we don't really want to
raise floating containers there.
Fixes#3325
This prohibits the usage of workspaces assigned to other outputs in
create_workspace_on_output.
Eg, with config:
workspace 1 output fake-0
workspace 2 output fake-0
and 2 screens workspace 2 would be used for the second screen even
though it is assigned to the first one.
Also introduces a test for workspace assignments that includes the case
described above and some tests that don't fail in the next branch.
This also replaces code in create_workspace_on_output() that is
theoretically more efficient but:
1. It isn't a huge difference since it depends on the number of outputs,
that shouldn't be high.
2. get_assigned_output will be modified and used for #555, then its
logic should be followed in create_workspace_on_output() too.
Another note for create_workspace_on_output: if assigned is not NULL the
condition (assigned != output->con) should never be false, ie if there
is an assigned output to this name, it isn't the current one. This
happens because the current callers check for assignments before calling
create_workspace_on_output().
https://www.x.org/releases/current/doc/kbproto/xkbproto.html#Detectable_Autorepeat
Detectable autorepeat should only affect --release bindings. Currently,
when a user keeps a key pressed, we get multiple KeyPress and KeyRelease
events. With this change, we still get multiple KeyPress events, which
means that you can still keep a key pressed to repeatedly execute a
normal binding, but only one KeyRelease event when the key is physically
released.
Unfortunately, this change is not currently testable because detectable
autorepeat doesn't seem to work under Xephyr. AwesomeWM experienced the
same problem:
6f2424e901Fixes#3306
X will not allow a window with ParentRelative background to be created
or reparented under a window with mismatching color depth.
Deal with this by destroying the container frame and creating a new one
with the right depth upon swallowing.
Defer destruction of the frame window until after the updated tree has
been rendered to avoid some distracting flickering.
Fixes#3297
fbce834b introduced a bug where scrolling over the decoration while
another container is focused would not focus the tabbed/stacked
container itself, but would instead move focus through the currently
focused container.
When moving a workspace to the current output by way of a rename, if the
current workspace is empty, it will be removed by `workspace_show`.
Attempting to restore focus to this removed workspace causes a crash.
Follow the pattern in workspace.c:996 to only restore the original focus if the
original workspace still exists.
Add a test to ensure that the renamed workspace moves to its appropriate
output and that a crash does not occur.
Fixes#3228
handle_screen_change() and handle_configure_notify() call
randr_query_outputs() where root_output is not initialized because
randr_init() is never called when config.fake_outputs is not NULL.
When we don't modify the focus we aren't risking giving focus to a
container behind the current fullscreen one.
_con_move_to_con can with ignore_focus is called through the swap
command or through con_move_to_workspace for floating containers. This
change shouldn't break the expectations of the callers there.
Fixes issue #3259.
This is enough to fix the crash discussed in #3259 even though the next
commit can fix it independently. This commit is useful because it
generally makes sense to abort the command when the first call to
_con_move_to_con fails.
- 'border toggle' now accepts an optional pixel argument which will be
ignored when switching to BS_NONE.
- 'border pixel' now defaults to 1 pixel instead of 2.
- Calling 'border normal' or 'border pixel' will use the configured
default_border_width if one exists. Also applies to floating windows.
Fix the issue #3227(https://github.com/i3/i3/issues/3227).
1).Make cmd_scratchpad_show() use the information coming from scratchpad_show().
2).Add a test case 298-scratchpad-show.t.
Was used for the removed option 'terminal' and for 'font'. 'font' is no
longer this aggressive and doesn't use the macro.
Killing i3 when an option is missing would be super backwards
incompatible so I doubt we are going to use this ever again.
Was a small typo.
This also has the (positive) side-effect of allowing to move all the
content of a marked workspace next to the target container, see added
tests.
Currently when renaming outputs, an output assignment of "left" will
cause the workspace to move left. Treat this assignment as a proper name
instead (even though it is unlikely an output will be named "left").
Move logic for determining output to move to out of
`workspace_move_to_output`
Add test for ignoring direcionality during rename.
Fixes#3208.
Using 'default:' cases can hide logical errors which would lead to i3
crashes for users. With this change the compiler will print a warning
when a case is not handled. For example, if I add a new value in the
Font.type enum:
../../i3/libi3/font.c: In function ‘draw_text’:
../../i3/libi3/font.c:378:5: warning: enumeration value ‘NEWFONT’ not handled in switch [-Wswitch]
switch (savedFont->type) {
^~~~~~
The current behaviour is buggy in the following layout:
T [ A* V [ B C ] ], where the focus stack in V is B > C.
When the user scrolls down, focus correctly moves to B but if the user
scrolls down again the whole vertical container is focused.
This happens because 'bool scroll_next_possible' is false but
con_activate is called on the tabbed container's sibling - the vertical
container.
Orestis Floros