Issue #3049 describes a case where terminating i3 by means of SIGTERM
causes it to leak the runtime directory and all its contents. There are
multiple issues at play: first, any cleanup handlers registered via
atexit are never invoked when a signal terminates the program (see
atexit(3)). Hence, the log SHM log cleanup performed in i3_exit is not
invoked in that case. Second, compared to the shutdown path for the
'exit' command, we do not unlink the UNIX domain socket we create,
causing it to be leaked as well. Third, a handler for SIGTERM is not
registered at all despite handle_signal claiming to be the handler for
all 'Term' signals.
This change addresses all three problems and results in a graceful exit
including cleanup to happen when we receive a signal with the default
action 'Term'. It addresses issue #3049.
We need to set dont_map => 1 on the sync window to prevent an endless loop.
Further, t/219-ipc-window-focus.t made assumptions about windows being named
incrementally, and that assumption is broken by the sync window opened by the
first sync_with_i3 call from open_window, so use the more reliable ->name.
1). Add one regression test in 167-workspace_layout.t:
- Get a fresh workspace
- Set the layout to something
- Create windows
- Try to switch to another layout
- Check if successful
- Repeat for all 12 possible transitions
2). Add another regression test in 167-workspace_layout.t:
- Check that the command 'layout toggle split' works regardless of
what layout we're using
This way, when changing focus between outputs, the directional focus
command will focus the focused window within the parent container that
is next in the given direction.
Previously, the next window of the given direction was focused which is
Inconsistent with changing focus inside the same output.
Fixes#1160.
Applied for:
1. '[...] focus' for a floating container raises it to the top.
2. Focusing a window through a focus event raises it to the top.
Fixes#2572
canonicalize_output_name allowed the "primary" special output name to
be canonicalized, thus converting it to the name of whatever output
was the primary output at the time. This caused settings
(specifically, i3bar output and tray_output settings) to be stored as
specific output names, instead of the intended special names whose
referred output may change as the system's configuration (i.e. current
primary output) changes.
Add a check to canonicalize_output_name to return the name as-is if it
is the special name "primary".
This fixes a regression introduced in commit
4e88c10564ca5366c2578908f62ec56625a26718: when attempting to move the
single child of a container in the direction of another output, i3
would move the window to the output, despite the window not being at
the edge of its output, instead of moving it to its parent container.
The bug occurred because the check for moving containers across
outputs with non-default workspace layouts (issue #1603) did not
actually verify that the moved window lies at the edge of the
workspace, despite what its comment said.
Fixes issue #2466.
Makes "assign [<criteria>] workspace number <number>" work in the same
manner as "move to workspace number <number>" instead of assigning the
window to a workspace named "number <number>".
config.spec is modified to expect a 'number' string and an extra
argument is used in cfg_assign.
For workspaces that don't exist yet, workspace_get is used as a
fallback. This also allows the user to assign to "<number> <workspace>"
eg "2: work" and the full name will be used if workspace number 2
doesn't exist yet.
Fixes#2590.
This way you can assign the test windows to an empty workspace to avoid
interacting with them (when xvfb-run is not an option):
assign [instance="i3test"] workspace testing
I previously tried to fix the check, but could only come up with a fix which
required removing our module pre-loading, which makes the tests considerably
more expensive. Instead, let’s just remove the check.
The test runs `xrandr setmonitor`, which will otherwise affect any test
scheduled after 533-randr15.t, causing flakyness in t/217-NET_CURRENT_DESKTOP.t
for example.
$config is never touched after being initially set up.
Not restarting i3 between each test case reduces the runtime of this test by an
order of magnitude.
This introduces memory usage by one copy of the config file, which is an
acceptable trade-off for being able to easily revert data loss.
The default config is 6KB, user configs will be in the same ballpark.
fixes#2856
This patch fixes the issue #2802 (https://github.com/i3/i3/issues/2802).
1). Revise the state machine for the 'rename workspace' command.
These scenarios are considered:
a). 'rename workspace to to bla'
state transitions: RENAME -> RENAME_WORKSPACE -> RENAME_WORKSPACE_LIKELY_TO -> RENAME_WORKSPACE_LIKELY_TO_NEW_NAME
b). 'rename workspace to tosomething'
state transitions: RENAME -> RENAME_WORKSPACE -> RENAME_WORKSPACE_LIKELY_TO
c). 'rename workspace to to'
state transitions: RENAME -> RENAME_WORKSPACE -> RENAME_WORKSPACE_LIKELY_TO
d). 'rename workspace to bla'
state transitions: RENAME -> RENAME_WORKSPACE -> RENAME_WORKSPACE_LIKELY_TO
e). 'rename workspace bla to foo'
state transitions: RENAME -> RENAME_WORKSPACE -> RENAME_WORKSPACE_TO -> RENAME_WORKSPACE_TO_NEW_NAME
2). Add a test case in 117-workspace.t for the scenario b.
Subset comparison was introduced with the rather large commit
bf3cd41b5d, but I now think we should use
equality.
In other words, the following key binding:
bindsym Mod4+x nop Mod4+x
previously would have been triggered when pressing Mod3+Mod4+x.
Strictly speaking, this is a change of behavior, but it breaks none of our
tests, and using equality instead of subset comparison enables more use-cases.
fixes#2002
This patch fixes the issue #2511(https://github.com/i3/i3/issues/2511).
1). Memorize the marks, but only call con_mark once the container has finished parsing. (Credit: This is @Airblader's patch.)
2). Add a test case 267-regress-mark-restart.t for regression test to check if mark and restart command crash i3.
This introduces the flag --exclude-titlebar for mouse bindings which
allows bindings like
bindsym --whole-window --border --exclude-titlebar button3 focus
fixes#2347
With this PR the 'layout toggle' command can be passed any
combination of valid layout keywords as arguments. They will
be activated one after another each time you issue the command,
advancing from left to right always selecting the layout after
the currently active layout or the leftmost layout if the active
layout is not in the argument list.
This PR also incorporates the feature request from #2476.
This event is triggered when the connection to the ipc is about to
shutdown because of a user action such as with a `restart` or `exit`
command. The `change` field indicates why the ipc is shutting down. It
can be either "restart" or "exit".
fixes#2318
This commit introduces proper support for the minimum size on floating
windows by ensuring that it is respected during mapping, later changes as
well as resizes.
Furthermore, this commit fixes minor issues with how the hints are handled
during calculations.
fixes#2436
This comes with the intentionally undocumented --disable-randr15 command
line flag and disable-randr15 configuration directive. We will add
documentation before the release if and only if it turns out that users
actually need to use this flag in their setups. Ideally, nobody would
need to use the flag and everything would just keep working, but it’s
better to be safe than sorry.
fixes#1799
This tool is similar to xtrace in usage in that it intercepts traffic to
the X server. The motivating feature for writing the tool is its ability
to inject prepared reply messages instead of the server’s reply. In
this particular case, we’ll inject a RRGetMonitors reply to test i3’s
RandR 1.5 code paths.
The added testcase is a noop for now, but with the code that’s lingering
in the randr15 branch, i3 does actually detect monitors as per the
injected reply:
2016-11-20 21:10:05 - randr.c:__randr_query_outputs:618 -
RandR 1.5 available, querying monitors
2016-11-20 21:10:05 - randr.c:__randr_query_outputs:628 -
1 RandR monitors found (timestamp 0)
2016-11-20 21:10:05 - randr.c:__randr_query_outputs:646 -
name DP3, x 0, y 0, width 3840 px, height 2160 px, width 520 mm,
height 290 mm, primary 1, automatic 1
This is preparation work for issue #1799
Orestis Floros