con_detach and con_attach modify the focus stack.
This will make sure that the currently focused workspace will remain
focused after disabling an output.
This fixes a crash produced with the following config:
# i3 config file (v4)
workspace 1 output $screen1
workspace 2 output $screen2
exec --no-startup-id "i3-msg workspace 1, open && i3-msg workspace 2 && xrandr --output $screen2 --off && xrandr --output $screen1 --auto --output $screen2 --auto --right-of $screen1 "
Which results in:
ERROR: AddressSanitizer: heap-use-after-free on address …
READ of size 8 at 0x614000001f48 thread T0
#0 0x5563df6e73a8 in init_ws_for_output i3/src/randr.c:468
#1 0x5563df6ef3b4 in randr_query_outputs i3/src/randr.c:940
#2 0x5563df68dbe1 in handle_screen_change i3/src/handlers.c:450
… is located 264 bytes inside of 448-byte region …
freed by thread T0 here:
#1 0x5563df634b0a in con_free i3/src/con.c:96
#2 0x5563df7151e6 in tree_close_internal i3/src/tree.c:344
#3 0x5563df7280fe in workspace_show i3/src/workspace.c:499
#4 0x5563df6e7315 in init_ws_for_output i3/src/randr.c:457
#5 0x5563df6ef3b4 in randr_query_outputs i3/src/randr.c:940
#6 0x5563df68dbe1 in handle_screen_change i3/src/handlers.c:450
Which is similar to #3228, #3248.
This commit makes multiple changes in tree_close_internal. I didn't
split them because they are not completely independent.
- Remove force_set_focus parameter
This parameter was always set to `false` throughout the code base except
for one case where it was set to `(con == focused)`, when killing a
floating con's parent (the one with type CT_FLOATING_CON). But this case
is not needed anymore since the special handling of CT_FLOATING_CONs in
con_next_focused was removed in #2941.
- Assume that con_next_focused does not returned a container of type
CT_DOCKAREA. This is reasonable since con_next_focused uses the
focus_head stack and has special handling of CT_DOCKAREA containers.
- Remove is_mapped
This variable was only used in the if block towards the end of
tree_close_internal. Ignoring the, now removed, dockarea code and the
use of force_set_focus this block performed only one useful action:
focus the `next` container when `con == focused`. `con == focused` was a
necessary and sufficient condition for the con_activate call:
if `con != focused` we could reach the inner if blocks because of the
other conditions but would never focus another container. If `con ==
focused` then all other conditions would be irrelevant.
- Remove special handling of floating containers
Since the `next` focused container is calculated through the parent for
floating containers, I moved this code to con_next_focused.
Also, because of the removal of force_set_focus, it appears that we can
call con_on_remove_child for floating containers as well.
handle_screen_change() and handle_configure_notify() call
randr_query_outputs() where root_output is not initialized because
randr_init() is never called when config.fake_outputs is not NULL.
In addition to the name of the monitor itself (which is still used as
the i3 output's primary name), register RandR output names associated
with the RandR monitor as alternative i3 output names.
Currently, only one name is ever added, and only the first name is
ever accessed; actually using the capability to store and access
multiple names comes in the following commits.
Currently simply returns output->name, but this will make it easier to
change how output names are stored in the following commits.
Also replace reading output->name with invocations of
output_primary_name. Code which writes output->name is unchanged. Done
using a mostly mechanical replacement of output->name to
output_primary_name(output).
This comes with the intentionally undocumented --disable-randr15 command
line flag and disable-randr15 configuration directive. We will add
documentation before the release if and only if it turns out that users
actually need to use this flag in their setups. Ideally, nobody would
need to use the flag and everything would just keep working, but it’s
better to be safe than sorry.
fixes#1799
Fix the issue #2421 (https://github.com/i3/i3/issues/2421).
floating_enable() invokes tree_close_internal() to free con->parent.
After con->parent is freed in tree_close_internal() but before con->parent is reassigned by the caller, con->parent may be dereferenced and causes i3 crash.
The backtrace below is an example.
The already-freed pointer is dereferenced again through the pointer "focused" in x_push_changes().
Reassign con->parent before calling tree_close_internal() to fix this use-after-free bug.
0x0000000000416372 in con_get_workspace (con=0x7ab9c0) at ../i3/src/con.c:375
0x0000000000416103 in con_has_managed_window (con=0x7ab9c0) at ../i3/src/con.c:266
0x000000000042b413 in x_push_changes (con=0x78d190) at ../i3/src/x.c:1132
0x0000000l0004533e8 in tree_render () at ../i3/src/tree.c:504
0x0000000000452b4f in tree_close_internal (con=0x7b67c0, kill_window=DONT_KILL_WINDOW, dont_kill_parent=false, force_set_focus=false)
../i3/src/tree.c:314
0x00000000004196f0 in con_on_remove_child (con=0x7b67c0) at ../i3/src/con.c:1801
0x0000000000452eb7 in tree_close_internal (con=0x783840, kill_window=DONT_KILL_WINDOW, dont_kill_parent=false, force_set_focus=false)
../i3/src/tree.c:364
0x0000000000431516 in floating_enable (con=0x7ab9c0, automatic=false) at ../i3/src/floating.c:183
0x0000000000431eed in toggle_floating_mode (con=0x7ab9c0, automatic=false) at ../i3/src/floating.c:379
0x0000000000420d92 in cmd_floating (current_match=0x679a20 , cmd_output=0x679aa0 , floating_mode=0x7ab8c0 "toggle")
../i3/src/commands.c:1088
0x000000000043e5ae in GENERATED_call (call_identifier=60, result=0x679aa0 ) at include/GENERATED_command_call.h:486
0x000000000043ee19 in next_state (token=0x675d70 ) at ../i3/src/commands_parser.c:187
0x000000000043f2fb in parse_command (input=0x7b4fe0 "floating toggle", gen=0x0) at ../i3/src/commands_parser.c:308
0x00000000004125f8 in run_binding (bind=0x784260, con=0x0) at ../i3/src/bindings.c:792
0x000000000042bace in handle_key_press (event=0x7a01a0) at ../i3/src/key_press.c:33
0x000000000044e6aa in handle_event (type=2, event=0x7a01a0) at ../i3/src/handlers.c:1420
0x0000000000439533 in xcb_check_cb (loop=0x7ffff532f8e0, w=0x68c140, revents=32768) at ../i3/src/main.c:133
0x00007ffff5125d73 in ev_invoke_pending () from /usr/lib/x86_64-linux-gnu/libev.so.4
0x00007ffff51293de in ev_run () from /usr/lib/x86_64-linux-gnu/libev.so.4
0x0000000000439418 in ev_loop (loop=0x7ffff532f8e0, flags=0) at /usr/include/ev.h:835
0x000000000043d51d in main (argc=3, argv=0x7fffffffe0a8) at ../i3/src/main.c:913
Including config.h is necessary to get e.g. the _GNU_SOURCE define and
any other definitions that autoconf declares. Hence, config.h needs to
be included as the first header in each file.
This is done either via:
1. Including "common.h" (i3bar)
2. Including "libi3.h"
3. Including "all.h" (i3)
4. Including <config.h> directly
Also remove now-unused I3__FILE__, add copyright/license statement
where missing and switch include/all.h to #pragma once.
If an output is disabled during a restart, for example because a binding
such as
bindsym $mod+Shift+r exec "xrandr --auto", restart
is used, it can happen that we first write the layout to disk and only
then receive the RandR change events. This leads to a situation where
the restored tree will contain these outputs, but the restarted i3
process will not receive the RandR events, thus the internal output in i3
is marked disabled.
This patch finds these cases after a restart and force-disables the
affected outputs.
fixes#2326
With this change, multi-monitor presentations (e.g. as implemented by
LibreOffice Impress) work out of the box. Previously, one had to move
the presentation windows to the right outputs oneself.
It should be clear for callers of this function that this is an internal
function that skips certain validations which might be important. Therefore
we make it clear that this is an internal function by renaming it.
relates to #1761
This fixes a bug I introduced in #1921. When restarting i3 in place a
stray workspace was created on the root_output during restart. On first
start, this workspace would have been moved to the first real and empty
output.
However, this does not produce the desired result during restarts when
workspaces are alread present on all real outputs. The stray workspace would
still be added to the first real output which already contains some
workspaces. Thus, adding a new empty workspace to it.
Fix this by delaying creation of the root output's workspace until it is
known whether the output is active or not.
Fixes#1940
This patch introduces a root output covering the root window. It is used
in two cases:
1. RandR is not available. In this case, the previous behaviour of
creating a single output covering the root window is preserved.
2. RandR is available, but there is no active output. In this case,
the root output is enabled and will be the only active output.
If any RandR output becomes available, the root output will be
disabled again. Existing mechanisms for migrating workspaces will
just work without modification.
I've carefully slipped in a global variable `Output root_output` representing
that output.
Fixes#926 and #1489
This reverts commit e71c304444.
It turns out that several users have workflows in which they turn off
their monitors without using e.g. `xrandr --output DP-1 --off`. The
result is that the monitors are disconnected, but not disabled.
With commit e71c304444, i3 started to see
these two states as one and the same state, but that causes more harm
than it does good. For example, for some users with only one monitor, i3
would just exit when these users turned off their monitor.
related to #1858, #1839fixes#1845
Check if the `connection` of the randr output is
XCB_RANDR_CONNECTION_DISONNECTED and disable the output if it is.
This fixes an issue where the output would not be disabled if the output was
physically unplugged from the machine.
Outputs may disappear momentarily and come back later.
To prevent i3 from exit when no output is available momentarily, add a timeout delay_exit_on_zero_displays.
This should be the last commit that formats a big bunch of files. From
here on, whenever I merge patches, I’ll run clang-format like described
in the title.
This has multiple effects:
1) The i3 codebase is now consistently formatted. clang-format uncovered
plenty of places where inconsistent code made it into our code base.
2) When writing code, you don’t need to think or worry about our coding
style. Write it in yours, then run clang-format-3.5
3) When submitting patches, we don’t need to argue about coding style.
The basic idea is that we don’t want to care about _how_ we write the
code, but _what_ it does :). The coding style that we use is defined in
the .clang-format config file and is based on the google style, but
adapted in such a way that the number of modifications to the i3 code
base is minimal.
Orestis Floros