In i3bar/src/config.c we compare string lengths agains magic numbers.
This change replaces those numbers with the lengths of the strings they
represent.
Previously, we used ev_check watchers, which are executed at the beginning of an
event loop iteration.
This was problematic if one of the handlers happened to fill the XCB event
queue, e.g. by reading a reply from X11 and an event happened in the meantime.
In that situation, we would hand control to the event loop, entirely ignoring
the pending event. This would manifest itself as a 1-minute hang,
reproducible (sometimes) in the i3 testsuite.
issue #2790 describes an instance of this issue in i3bar, and we fixed that by
changing the watcher priority to run last. Handling events in xcb_prepare_cb has
the same effect, as ev_prepare watchers are run just before the event loop goes
to sleep.
All other message types are verbs, only our first-ever message COMMAND wasn’t.
While we’re here, also change the message type dictionary into a table with
clickable links to the corresponding reply type.
Authors of downstream IPC libraries are encouraged to keep the old name around
so as to not break existing code, but mark it as deprecated.
As of 2f0f8b1, i3bar will properly clean up on output change events.
However, this requires us to query the workspaces again to avoid a
display error in i3bar.
fixes#2740fixes#2743
Thanks to @psychon for pointing this out during the review of PR #2624.
This commit extends this change to all other occurences of Expose events
within i3.
https://llvm.org/bugs/show_bug.cgi?id=30353 was filed for the unintended
line break between in e.g. “TAILQ_ENTRY(foo)\nbar;”.
Until that’s fixed or a workaround is known, we’ll live with line
breaks. To make it a bit easier for readers to see what’s going on, I
added extra line breaks around each such struct member/variable
definition, so that they at least visually are a single unit.
fixes#2174
Including config.h is necessary to get e.g. the _GNU_SOURCE define and
any other definitions that autoconf declares. Hence, config.h needs to
be included as the first header in each file.
This is done either via:
1. Including "common.h" (i3bar)
2. Including "libi3.h"
3. Including "all.h" (i3)
4. Including <config.h> directly
Also remove now-unused I3__FILE__, add copyright/license statement
where missing and switch include/all.h to #pragma once.
This commit probably comes as a surprise to some, given that one of i3’s
explicitly stated goals used to be “Do not use programs such as
autoconf/automake for configuration and creating unreadable/broken makefiles”.
I phrased this goal over 7 years ago, based largely on a grudge that I
inherited, which — as I’ve realized in the meantime — was largely held against
FOSS in general, and not actually nuanced criticism of autotools.
In the meantime, I have come to realize that the knee-jerk reaction of “I could
do this better!” (i.e. writing our own build system in this particular case) is
usually misguided, and nowadays I strongly suggest trying hard to fix the
existing system for the benefit of all existing and future users.
Further, I recently got to experience the other side of the coin, as I packaged
a new version of FreeRADIUS for Debian, which at the time of writing used
autoconf in combination with boilermake, a custom make-based build system that
only FreeRADIUS uses. Understanding the build system enough to fix issues and
enable parallel compilation took me an entire day. That time is time which
potentially every downstream maintainer needs to invest, and the resulting
knowledge cannot be applied to any other project.
Hence, I believe it’s a good idea switch i3 to autotools. Yes, it might be that
particular features were easier to implement/understand in our custom
Makefiles, and there might be individuals who have an easier time reading
through our custom Makefiles than learning autotools. All of these
considerations are outweighed by the benefits we get from using the same build
system as literally thousands of other FOSS software packages.
Aside from these somewhat philosophical considerations, there’s also practical
improvements which this change brings us. See the “changes” section below.
┌──────────────────────────────────────────────────────────────────────────────┐
│ new workflow │
└──────────────────────────────────────────────────────────────────────────────┘
You can now build i3 like you build any other software package which uses
autotools. Here’s a memory refresher:
autoreconf -fi
mkdir -p build && cd build
../configure
make -j8
(The autoreconf -fi step is unnecessary if you are building from a release
tarball, but shouldn’t hurt either.)
┌──────────────────────────────────────────────────────────────────────────────┐
│ recommended reading │
└──────────────────────────────────────────────────────────────────────────────┘
I very much recommend reading “A Practitioner's Guide to GNU Autoconf,
Automake, and Libtool” by John Calcote (https://www.nostarch.com/autotools.htm).
That book is from 2010 and, AFAICT, is the most up to date comprehensive
description of autotools. Do not read older documentation. In particular, if a
document you’re reading mentions configure.in (deprecated filename) or
recursive make (now considered harmful), it’s likely outdated.
┌──────────────────────────────────────────────────────────────────────────────┐
│ changes │
└──────────────────────────────────────────────────────────────────────────────┘
This commit implements the following new functionality/changes in behavior:
• We use the AX_ENABLE_BUILDDIR macro to enforce builds happening in a separate
directory. This is a prerequisite for the AX_EXTEND_SRCDIR macro and building
in a separate directory is common practice anyway. In case this causes any
trouble when packaging i3 for your distribution, please let me know.
• “make check” runs the i3 testsuite.
You can still use ./testcases/complete-run.pl to get the interactive progress
output.
• “make distcheck” (runs testsuite on “make dist” result, tiny bit quicker
feedback cycle than waiting for the travis build to catch the issue).
• “make uninstall” (occasionally requested by users who compile from source)
• “make” will build manpages/docs by default if the tools are installed.
Conversely, manpages/docs are not tried to be built for users who don’t want
to install all these dependencies to get started hacking on i3.
• non-release builds will enable address sanitizer by default. Use the
--disable-sanitizers configure option to turn off all sanitizers, and see
--help for available sanitizers.
• Support for pre-compiled headers (PCH) has been dropped for now in the
interest of simplicitly. Maybe we can re-add it later.
• coverage reports are now generated using “make check-code-coverage”, which
requires specifying --enable-code-coverage when calling configure.
┌──────────────────────────────────────────────────────────────────────────────┐
│ build system feature parity/testing │
└──────────────────────────────────────────────────────────────────────────────┘
In addition to what’s described above, I tested the following features:
• “make install” installs the same files (plus documentation and manpages)
cd i3-old && make install PREFIX=/tmp/inst/old
cd i3-new && ./configure --prefix=/tmp/inst/new
cd /tmp/inst
(cd old && for f in $(find); do [ -e "../new/$f" ] || echo "$f missing"; done)
• make dist generates a tarball which includes the same files
cd i3-old && make dist
cd i3-new/x86_64-pc-linux-gnu && make dist
colordiff -u <(tar tf i3-old/i3-4.12.tar.bz2 | sort) \
<(tar tf i3-new/x86_64-pc-linux-gnu/i3-4.12.tar.gz | sort)
There are some expected differences:
• Some files have been renamed (e.g. the new etc/ and share/ subdirectories)
• Some files will now be generated at build-time, so only their corresponding
.in file is shipped (e.g. testcases/complete-run.pl)
• The generated parser files are shipped in the dist tarball (they only
depend on the parser-specs/* files, not on the target system)
• autotools infrastructure is shipped (e.g. “configure”, “missing”, etc.)
• DLOG and ELOG statements still produce the same file name in logfiles
• Listing source code in gdb still works.
• gdb backtraces contain the i3-<version> path component
• release.sh still works
• version embedding
1. git checkout shows “4.12-136-gf720023 (2016-10-10, branch "autotools")”
2. tarball of a git version shows “4.12-non-git”
3. release tarball shows 4.13
• debug mode is enabled by default for non-release builds
• enabling verbose builds via V=1
┌──────────────────────────────────────────────────────────────────────────────┐
│ speed │
└──────────────────────────────────────────────────────────────────────────────┘
There is no noticeable difference in compilation speed itself (of binaries,
documentation and manpages):
i3-old $ time make all docs mans -j8
make all docs mans -j8 28.92s user 2.15s system 640% cpu 4.852 total
i3-new $ time make -j8
make -j8 27.08s user 1.92s system 620% cpu 4.669 total
In terms of one-time costs:
configuring the build system (../configure) takes about 2.7s on my machine,
generating the build system (autoreconf -fi) takes about 3.1s on my machine.
┌──────────────────────────────────────────────────────────────────────────────┐
│ m4 macros │
└──────────────────────────────────────────────────────────────────────────────┘
All files in m4/ have been copied from the autoconf-archive package in version
b6aeb1988f4b6c78bf39d97b6c4f6e1d594d59b9 and should be updated whenever they
change.
This commit has been tested with autoconf 2.69 and automake 1.15.
Some tray clients such as VLC use override_redirect on their tray window. As per
specification this means i3bar won't receive a ConfigureRequest, but instead a
ResizeRequest will be triggered. If not selected, the X server will simply confirm
the request which leads to a broken tray window size.
This commit selects and handles the event just like a configure request is handled.
fixes#2494
When I3SOCK is present, socket_path might be a pointer to an
environment variable, which cannot be free'd in line 157. This
commit duplicates the string if I3SOCK is present, thus making
socket_path a free-able pointer again.
This commit removes an unnecessary fallback to the first output's name as
this name ("first") will only be used to see whether "tray_output none"
has been specified, anyway.
We also add documentation that clearly states when we want to initialize
the tray and when we don't want to do the same.
relates to #2220
This commit removes the code for falling back to the first available
output for the system tray if 'tray_output primary' has been specified
but there is no primary output (managed by this bar).
This fallback behavior was broken/unreachable because the tray
will never be initialized in this situation in the first place. Having
this dead code lead to a wrong assumption in #1855 and hence to
commit e2e7b70d00, which makes the
system tray not show up for many users when first installing i3.
Thanks to @rtlanceroad for reporting this issue.
fixes#2220
This allows "modifier none" (and "modifier off") for the bar config
in order to disable the modifier key altogether. This is useful
for users who use a different approach to hiding / showing the bar,
e.g., a custom keybind that involved multiple keys or scripts.
fixes#2208
This disables the default leak-check-on-exit behavior which reports a
bunch of leaks that are only leaks while exiting, at which point they
don’t matter, because the operating system will clean up the memory our
process used.
This patch moves the title_format information from windows to containers.
Furthermore, it allows correctly setting it on window-less containers and
displays the title accordingly for split containers.
We now also dump and read title_format in GET_TREE / during restarts.
fixes#2120
Ingo Bürk