* Implement criterion specs just like it is done in the spec for the config
* Declare variables in test case early so the 'my' keyword can be dropped in the actual test cases
Introduce a config directive "show_marks [yes|no]" to en- or disable drawing marks on window decorations.
To not change the look & feel of existing configurations, the default is "no".
When a window receives a _NET_ACTIVE_WINDOW message, it can steal the focus. This may not be preferable to all users.
With this directive, the user can choose from one of the following:
1) 'smart' - focus the container if its workspace is visible, otherwise set the urgency flag (default)
2) 'urgent' - always set the urgency flag, do not steal focus
3) 'focus' - always switch focus, never set the urgency hint
4) 'none' - ignore the request entirely (do not switch focus, nor set the urgency hint)
fixes#1426
This option allows toggling marks on a window without knowing whether the mark is already set or not.
It behaves as follows:
1) If the matched window has no mark, the new mark is set.
2) If the matched window has another mark, the old mark is removed and the new mark is set.
3) If the matched window already has the mark, the mark is removed.
The behavior that all non-matched windows have this mark removed is kept.
fixes#1463
This introduces a "separator_symbol" property for the i3bar configuration.
If set, the specified string will be used as a separator instead of a vertical line. Since it is an optional configuration, complete backwards compatibility is given.
fixes#1472
Add the `--whole-window` switch for mouse bindings. This switch controls
what part of the container the pointer must be over to trigger a mouse
binding. The default is to only trigger mouse bindings over the
titlebars. With this switch, a mouse binding will be triggered over the
main part of the window as well.
This is a breaking change to the previous behavior, which would trigger
a mouse binding with a modifier over any part of the window.
fixes#1429
Rather than just toggling the fullscreen modes, allow to set them
directly with:
fullscreen enable|toggle [global]
fullscreen disable
For compatibility, retain the previous command and its toggling behavior:
fullscreen [global]
fixes#1120
Users can specify a command to run when a button was pressed on i3bar to
override the default behavior. Currently only the mouse wheel buttons
are supported. This is useful for disabling the scroll wheel action or
running scripts that implement custom behavior for these buttons.
Example:
bar {
wheel_up_cmd nop
wheel_down_cmd exec ~/.i3/scripts/custom_wheel_down
}
fixes#1104
This patch adds a new configuration option "mouse_warping [output|none]".
When mouse warping is disabled, mouse cursor does not jump to middle of current
screen when changing workspaces between multiple outputs. This introduces a
"special" cursor state, where focus is in one window and cursor on another.
Useful for eg. scrolling a web page with mouse wheel while typing into another
window on keyboard.
Implement the configuration option within the bar config directive for
custom workspace numbers with the directive `strip_workspace_numbers
yes`.
This directive strips the workspace name of the number prefix and
delimiter. When the workspace name consists only of the number, it will
default to show the number.
For example:
* "2:5" -> "5"
* "4:$" -> "$"
* "8" -> "8"
This allows customization of i3bar for alternate ordering of workspaces
which has a legitimate use for alternate keyboard layouts such as
Dvorak.
fixes#1131
i3 would accept an invalid resize command like 'resize shrink width 10
px or' without specifying the ppt value, and then crash. This patch
fixes the parser specification.
i3 current behavior hides the binding mode indicator when
workspace buttons are disabled.
This patch adds a new configuration for i3bar called
'binding_mode_indicator' which acts like the workspace_buttons.
It is now possible to configure i3bar to hide the
workspace buttons and keep showing the binding mode indicator.
This should make the hide workspace buttons configuration
more convenient for those who are heavily using binding
modes.
Default value for binding_mode_indicator is true.
Add debuglog command that takes toggle|on|off. Add get_debug_logging()
to be able to toggle. Make t/187-commands-parser.t expect 'debuglog'.
Document the debuglog command in userguide.
Add shmlog command that takes <size>|toggle|on|off. Separate logbuffer
management into open_logbuffer() and close_logbuffer(). Make
t/187-commands-parser.t expect 'shmlog'. Add update_shmlog_atom() to
update the SHMLOG_PATH. Document the shmlog command in userguide.
The hidden_state and mode of each i3bar instance can now be controlled from within i3.
Therefore, two new i3 command were introduced:
_
bar hidden_state show|hide|toggle [<bar_id>]
show: always show the bar
hide: normal hide mode
toggle: toggle between show and hide (individually for each bar)
_
bar mode dock|hide|invisible|toggle [<bar_id>]
hide,dock: like before
invisible: always keep the bar hidden
toggle: toggle between dock and hide (individually for each bar)
This patch introduces a hidden_state ("hidden_state hide|show") in the
barconfig, which indicates the current hidden_state of each i3bar
instance. It only affects the bar when in hide mode. Additionally, a new
invisible mode was introduced. In order to change the hidden_state or
mode of the bar from i3, a barconfig-update event was introduced, for
which a bar can subscribe and the bar then gets notified about the
currently set hidden_state and mode in its barconfig.
For convenience, an id field ("id <bar_id>") was added to the barconfig, where one can
set the desired id for the corresponding bar. If the id is not specified, i3 will
deterministically choose an id; otherwise, with the previous random approach for finding
a new id, which is actually not shared with i3bar, as it would determine its id on
startup, the event-subscription would be destroyed on reload. Still, this issue remains
when manually changing the bar_id in the config and then reloading.
fixes#833, #651
This patch adds the following features:
1) Configure a color of the separator via config. It is done like
bar {
colors {
separator #000000
}
}
2) A block can have an integer entry "separator_block_width" which
sets the width of the gap which would follow after the current block.
3) A block can have a boolean entry "separator" and if it is set
to false, then the drawing of the separating line would be disabled.
The parse spec for `move ... workspace ...` ordered next/prev before
next_on_output/prev_on_output causing the parser to match next/prev
before next_on_output/prev_on_output.
Ticket: http://bugs.i3wm.org/report/ticket/941
This adds some code duplication which we might remove in a future
refactoring or not. Depends on whether unifying the parsers actually
makes the code better or not. I suspect it doesn’t :-).
The corresponding command is 'rename workspace to <name>'. As a side-effect
this fixes the command 'rename workspace 1 to to'.
Signed-off-by: Michael Walle <michael@walle.cc>
this implements both the "move container to workspace back_and_forth" command
and movements to the same workspace when auto_back_and_forth is set.
it includes documentation and test suite additions by michael.
it also simplifies the workspace_show_by_name function (making use of
workspace_get accepting NULL pointers).
With this commit, the "default" layout is replaced by the splith and
splitv layouts. splith is equivalent to default with orientation
horizontal and splitv is equivalent to default with orientation
vertical.
The "split h" and "split v" commands continue to work as before, they
split the current container and you will end up in a split container
with layout splith (after "split h") or splitv (after "split v").
To change a splith container into a splitv container, use either "layout
splitv" or "layout toggle split". The latter command is used in the
default config as mod+l (previously "layout default"). In case you have
"layout default" in your config file, it is recommended to just replace
it by "layout toggle split", which will work as "layout default" did
before when pressing it once, but toggle between horizontal/vertical
when pressing it repeatedly.
The rationale behind this commit is that it’s cleaner to have all
parameters that influence how windows are rendered in the layout itself
rather than having a special parameter in combination with only one
layout. This enables us to change existing split containers in all cases
without breaking existing features (see ticket #464). Also, users should
feel more confident about whether they are actually splitting or just
changing an existing split container now.
As a nice side-effect, this commit brings back the "layout toggle"
feature we once had in i3 version 3 (see the userguide).
AFAIK, it is safe to use in-place restart to upgrade into versions
after this commit (switching to an older version will break your layout,
though).
Fixes#464
Michael Stapelberg