ed1d13b0a1
i3bar: Fix pixel offset calculation in dual-head
...
When running i3bar on a dual-head display with workspaces enabled in i3bar's
config, the second monitor wouldn't use a correct x position offset and
would draw its label too close to the screen's edge. In comparison to the
first monitor, this is inconsistent because that starts with a pixel offset
of 1.
2013-05-20 15:09:15 +02:00
8247f44e95
Merge branch 'master' into next
2013-04-14 22:54:36 +02:00
72c279bc39
Bugfix: fix crash when not having tray_output configured (Thanks Layus)
2013-04-14 22:54:15 +02:00
90bfbac107
fix font display height in i3bar
...
Increase the drawing area height, in order to prevent the font from being cut off.
fixes #992
2013-04-13 19:49:06 +02:00
a9aad872ee
unhide hidden i3bar when mode is active
...
This patch also handles unhiding of i3bar in case the i3bar modifier key is
pressed for activating a new binding mode.
2013-04-13 10:16:34 +02:00
921967c729
unhide hidden i3bar when mode is active
...
fixes #961
2013-04-11 22:35:54 +02:00
402c3db7ac
restore i3bar compatibility with libyajl version 1
...
fixes #1004
2013-04-07 15:54:20 +02:00
6b0efac483
i3bar: fix usage description, make -b happen
2013-03-29 09:55:03 +01:00
18148205b6
Don't dup2() the parent's stdout to child's stdin.
...
There're DLOG()s, seriously.
2013-03-24 09:55:46 +01:00
58e68940f6
Add click events to i3bar
...
If the statusline generator (i.e. i3status) specifies click_events:true
in the protocol header, i3bar will write a JSON array on it's stdin
notifying it if the user clicks on a block.
The exact protocol is documented in docs/i3bar-protocol.
2013-03-21 23:55:30 +01:00
ae0842532e
Bugfix: Set separator color properly when drawing
...
Set the colors in the GC directly since set_font_colors() does not do it
when using a Pango font, resulting in i3bar drawing separators in the
wrong color.
2013-02-25 23:49:15 +01:00
a0d5b744ab
Allow min_width of a block in i3bar to be a string
...
With this change, min_width can either be an integer (as usual), or a
string. In the latter case, the width of the text given by min_width
determines the minimum width of the block. This way one does not have to
figure out a minimum width by trial and error, only to do it again every
time the font is changed.
2013-02-25 23:48:35 +01:00
5f05ca6b5d
Separator color via config; separator width and on/off via ipc
...
This patch adds the following features:
1) Configure a color of the separator via config. It is done like
bar {
colors {
separator #000000
}
}
2) A block can have an integer entry "separator_block_width" which
sets the width of the gap which would follow after the current block.
3) A block can have a boolean entry "separator" and if it is set
to false, then the drawing of the separating line would be disabled.
2013-02-18 10:44:44 +01:00
fc3b0db7a5
i3bar: fix rendering positions
2013-01-24 17:21:34 +01:00
990a1ca4c2
i3bar: don’t use X11 borders to avoid overlapping in hide mode
...
fixes #923
2013-01-24 16:09:51 +01:00
f2ca568202
i3bar: set _NET_SYSTEM_TRAY_COLORS for symbolic icons (gtk3+)
2013-01-02 23:14:30 +01:00
e9503a1fa3
i3bar: fake DestroyNotify and send MANAGER ClientMessages to fix tray restarts
...
fixes #745
2013-01-02 23:14:27 +01:00
2043076518
i3bar: add missing \n to debug messages
2013-01-02 11:38:03 +01:00
7658109309
Bugfix: remove superfluous #include <xcb/xcb_atom.h> (Thanks pnutzh4x0r)
...
This fixes the build on CentOS 6.
fixes #889
2012-12-14 21:49:31 +01:00
e8149c77b3
i3bar: add min_width and align keys to blocks
2012-12-06 09:48:27 +01:00
6148136e7c
i3bar: Add current binding mode indicator
2012-11-16 13:44:29 +01:00
b9885ff21e
bugfix: don’t send workspace command when at beginning/end of workspaces (Thanks whitequark)
...
fixes #843
2012-10-14 21:05:44 +02:00
89ca48be20
i3bar: Honor "urgent" protocol hint by unhiding
2012-09-22 15:15:57 +02:00
830829922b
i3bar: Allow to force unhide with draw_bars
2012-09-22 15:15:57 +02:00
8210c6be79
i3bar: Allow child to specify signals to use
...
We now wait for the child process to send the first line before stopping
it to use the signal which might be specified in the i3bar protocol
header
Since clients might use the same signal for both stop and cont, we also
save the stopped state of the child to avoid stopping it while hidden!
2012-09-22 15:13:21 +02:00
1e114d7ab5
i3bar: Fully parse the JSON header
2012-09-22 15:13:21 +02:00
34dc6d4d64
i3bar: Introduce i3bar_child struct
2012-09-22 15:13:21 +02:00
310ae2d0b5
i3bar: Handle the first line with another callback
2012-09-22 15:13:21 +02:00
f691927aa7
i3bar: Split JSON line logic to read_json_input
2012-09-22 15:13:21 +02:00
103b1a3f3a
i3bar: Split flat line logic to read_flat_input
2012-09-22 15:13:21 +02:00
3732cef764
i3bar: Split stdin reading logic to get_buffer
2012-09-22 15:13:21 +02:00
13ecc79fcc
i3bar: Rename determine_json_version to parse_json_header
2012-09-22 15:13:21 +02:00
2e5838fb49
i3bar: Rework unhide/hide on workspace urgency
...
We now check globally for workspace urgency instead of per-output since
the result is the same but we call unhide_bars/hide_bars only once this
way
2012-09-22 15:13:21 +02:00
f18ab28f5c
bugfix: memleak: use i3STRING_FREE() instead of FREE()
2012-09-03 00:42:17 +02:00
2d1ebc2b90
Bugfix: memleak: because we use i3string_from_utf8(), we need to free buffer()
...
Previously, buffer was directly used and thus not freed, but
i3string_from_utf8() makes a copy.
2012-09-03 00:42:14 +02:00
b9255f51f8
Use (void) instead of () for functions without args
2012-08-23 19:34:37 +02:00
2896ae8057
logging: make libi3 use verboselog()/errorlog(), provide it in each caller
...
While this is a bit ugly, it makes the log messages end up where they
are supposed to: in the shmlog/stdout in case of i3 and on stdout in
case of utilities such as i3-input
2012-08-13 13:27:16 +02:00
edd9007ebf
i3bar: Rename xcb_screen to root_screen for consistency
2012-08-13 11:37:34 +02:00
210fc6dfed
libi3: Rework predict_text_width
...
predict_text_width now takes an i3String as argument
2012-08-13 11:37:23 +02:00
53365fa887
libi3: Rework draw_text
...
We now have two versions of draw_text
draw_text: Now takes an i3String
draw_text_ascii: Designed for static strings in plain ASCII
2012-08-13 11:37:21 +02:00
bbd1b16043
i3bar: Port to i3String
2012-08-13 11:30:05 +02:00
e53405c216
i3bar: be less strict about the {"version":1} JSON header
2012-08-12 18:40:15 +02:00
875130e7e8
Automatically hide i3bar when it's unneeded.
...
When a workspace marked 'urgent', i3bar unhide
itself. if I want to hide it again, I must press the
modifier.This sometimes annoys me.
In this patch I change the above behavior to this:
If a urgent workspace occurs, i3bar will unhide itself;
and when you navigates away from the last urgent
workspace and there is no more urgent workspace, i3bar
will hide itself.
2012-08-02 01:44:25 +02:00
8f2e225db9
i3bar: Fix warnings with libyajl1 (Thanks prg)
...
yajl1 has the status yajl_status_insufficient_data, which in our stream
parsing context basically means "ok". Therefore, in yajl1, we no longer
print an error in this case.
2012-07-16 19:23:37 +02:00
3daa3e052f
Don't display empty strings from i3status in i3bar
2012-07-11 19:06:02 +02:00
8a3574f301
i3bar: inform _all_ clients of new tray selection owner
...
This fixes a problem with X-chat (and possibly others).
Fixes : #745
2012-07-10 22:52:14 +02:00
599f7cc2a4
i3bar: handle clicks with negative coordinates (Thanks Julian)
...
This can happen if you move your mouse pointer to the very left of the
screen and then click. For better usability, we handle this edge case
like a click on pixel 0.
2012-06-10 21:04:51 +02:00
156a06e495
i3bar: Don’t crash when full_text is missing or null in the JSON input (Thanks fernandotcl)
2012-05-12 08:23:51 +02:00
4f93e0587a
don’t wrap when changing workspaces by mouse wheel scrolling
2012-05-09 20:16:02 +02:00
3a378f7cb1
i3bar: don’t immediately redraw bars after kicking tray clients
2012-04-24 12:04:35 +02:00
17b477d25d
i3bar: when kicking tray clients, remove them immediately
...
This should fix empty spaces showing up instead of tray icons sometimes.
2012-04-22 20:53:01 +02:00
78891c1c62
i3bar: when tray_output == primary and there is no primary output, fall back to the first available output
2012-04-22 20:51:15 +02:00
17e4d7ede1
i3bar: kick tray clients after output configuration changed
...
This makes i3bar reflect xrandr --output foo --primary changes immediately.
2012-04-22 20:43:52 +02:00
189b27b01e
i3bar: Bugfix: Properly update the primary flag
2012-04-22 20:43:43 +02:00
54222d5617
Merge branch 'master' into next
2012-04-22 20:11:25 +02:00
97d17f2f5b
i3bar: Bugfix: Properly reparent tray clients before killing the bar window when outputs disappear
...
Fixes : #655
2012-04-22 20:10:29 +02:00
24ac6e32aa
Bugfix: Properly terminate lines not ending with a newline (Thanks xeen)
...
Previously, we didn’t check for a newline and thus could be corrupting
formerly valid UTF-8 input, such as
echo -n '↓'
Fixes : #671
2012-04-07 19:15:41 +02:00
9a58c1fcaa
Added option to select primary display on tray_output
2012-04-05 14:42:07 +02:00
d519659ea7
i3bar: kill child processes when exit()ing (they might be stopped) (Thanks darkraven)
2012-03-26 17:36:00 +02:00
607ba6fcde
i3bar: Fix memory for old plain-text input (Thanks Han)
2012-03-19 22:30:20 +01:00
e7761a342b
Merge branch 'master' into next
2012-03-19 21:42:08 +01:00
8b4ad8c6bd
Fix i3bar when using multiple displays (Thanks brimstone)
2012-03-19 21:41:45 +01:00
a3ee8491fd
i3bar: compile with yajl < 2
2012-02-16 23:41:58 +00:00
31b9d24c2b
Implement the i3bar JSON protocol (with fallback to plain text)
...
If the first line of the input starts with {"version":, then the input is
considered to be JSON, otherwise it is interpreted as plain text.
Only the "full_text" and "color" parts of a block are currently understood by
i3bar.
2012-02-16 23:28:18 +00:00
fd2ff3a6ef
Bugfix: insert ending double quote at the right position (Thanks mxf)
2012-02-10 19:55:40 +00:00
2f8d3d3390
Bugfix: Properly handle workspace names with double quotes (+test) (Thanks kvapen)
2012-02-07 22:50:27 +00:00
8b29250c32
Fix the text alignment in the workspace indicator.
...
We now use 5px padding for the workspace text on both sides. Some
fonts will look off-by-one (e.g. fixed), but that's because X core
fonts have padding. This padding is per-char, varies wildly across
different fonts, and would be a major pain to offset for. Even if
we could take this padding into account, this would probably make
things look even worse for some fonts.
2012-01-29 23:08:58 +00:00
0f360f16ab
i3bar: make the ws buttons a bit smaller (like before) and improve the centering
2012-01-29 20:55:54 +00:00
144be37517
i3bar: correctly check errors when getting the _XEMBED_INFO property
...
This fixes a problem where starting gnome-settings-daemon (maybe other
programs, too) would leave an empty spot in i3bar’s tray area.
2012-01-28 10:22:43 +00:00
5a2673d08a
Fixed worspace clicking area for i3bar (branch next)
2012-01-28 10:08:14 +00:00
cc8a3c1019
i3bar: make the space between workspace buttons 1 px again
2012-01-28 10:05:51 +00:00
1d5071ebbe
i3bar: ignore the "socket_path" config option (redundant anyway)
2012-01-20 22:29:24 +00:00
b5c25761d5
Bugfix: i3bar: Use the correct keys when reading the color config
2012-01-20 22:03:52 +00:00
31b7ec29fd
Re-implement bar borders (by Angelo Haller)
...
This re-introduces borders around the workspace buttons in i3bar.
No additional pixels will be consumed (you will not lose any space for your
windows).
2012-01-20 21:36:50 +00:00
a3081c488a
Allow different modifier keys for showing hidden i3bar.
2012-01-08 12:47:41 +00:00
561cf3719f
little style fixes
2011-11-21 21:48:24 +00:00
344c04af12
Implement set_font_colors.
...
This paves the way for other font rendering backends. Fonts and
colors shouldn't be specified manually from now on.
2011-11-21 20:52:32 +00:00
5c2088c87e
Enhance libi3 and use it in i3bar.
...
Abstracted draw_text and predict_text_width into libi3. Use
predict_text_width from libi3 in i3 too. This required tracking
xcb_connection in a xcb_connection_t *conn variable that libi3
expects to be available in i3bar.
2011-11-21 20:52:26 +00:00
fb11cc2d14
Consolidate all convert_* functions into libi3.
...
Some minor fixes along the way as well. Very minor stuff, unlikely
to ever be visible to the user.
2011-11-16 20:54:30 +00:00
7f9b65f6a7
i3bar: fix event handling
...
i3bar would only handle one event at a time instead of all pending events.
2011-11-09 23:23:21 +00:00
e85a352fcf
i3bar: correctly handle unmapped tray clients, reconfigure tray icons after mapping/unmapping (Thanks IsoLnCHiP)
...
Fixes #550
2011-11-09 23:22:44 +00:00
f0cc13f356
i3bar: fix indention in src/child.c
2011-11-07 21:34:50 +00:00
d5613905c8
Plug minor leaks in string conversion routines.
2011-11-07 19:57:11 +00:00
ddf261432a
i3bar: change default color for active workspace buttons to make them visible
...
Previously, you could not figure out which workspace is displayed on a screen
which is not focused.
2011-11-07 19:52:21 +00:00
a977b2d96e
i3bar: fix -h output (Thanks IsoLnCHiP)
2011-10-31 20:44:55 +00:00
726f2a1e5a
normalize file headers across **/*.{h,c}
2011-10-25 21:19:38 +01:00
35bd2d27c0
i3bar: put tray icons in the save-set (prevents them from crashing when i3bar exits/crashes)
2011-10-24 20:11:32 +01:00
9eda7fb6fb
move strndup to libi3
2011-10-23 18:02:01 +01:00
ada4857ad2
Fix colors in i3bar (Thanks julien)
...
i3bar previously used get_colorpixel on strings without the leading # (ff0000
instead of #ff0000). Since it uses libi3’s get_colorpixel now we needed to
update a few places.
2011-10-23 17:48:44 +01:00
cb9bbcfccf
Move get_colorpixel to libi3, use it everywhere else
2011-10-23 17:38:21 +01:00
4f57d49318
add libi3/ipc_connect, use it in i3-config-wizard, i3-input, i3bar
2011-10-23 17:18:14 +01:00
499d4c11e0
i3bar: make len an integer for %.*s in sasprintf
2011-10-23 16:39:39 +01:00
96f67a53a5
i3bar: check exit code of pipe()
2011-10-23 14:31:43 +01:00
9d15a00ba8
introduce sasprintf() in libi3, use it everywhere
2011-10-23 13:16:56 +01:00
bc2c63d4ed
i3bar: change default font to the i3 default one
2011-10-22 15:00:31 +01:00
3ee8bd502d
i3bar: change default colors to fit the i3 look & feel
...
The new default looks like this (like in docs/userguide):
colors {
background #000000
statusline #ffffff
focused_workspace #ffffff #285577
active_workspace #888888 #222222
inactive_workspace #888888 #222222
urgent_workspace #ffffff #900000
}
If you want to go back to the previous colors, use:
colors {
background #000000
statusline #ffffff
focused_workspace #ffffff #480000
active_workspace #ffffff #480000
inactive_workspace #ffffff #240000
urgent_workspace #ffffff #002400
}
2011-10-22 12:34:06 +01:00
014c3e4b95
i3bar: Bugfix: Don’t crash when tray_output is not set (Thanks fernandotcl)
2011-10-21 23:15:15 +01:00
15f021b4fc
i3bar: Implement the output option
2011-10-21 22:17:41 +01:00
6de1590e59
i3bar: spit out an error on wrong bar id
2011-10-21 20:04:55 +01:00
a3b7ba15ed
i3bar: also use the position option when in 'hide' mode
2011-10-21 19:59:25 +01:00
8a24be9555
i3bar: implement the tray_output option
2011-10-21 19:47:56 +01:00
d71db710dd
i3bar: use safewrappers from libi3
2011-10-21 19:30:46 +01:00
cf67966fa0
i3bar: document -b in --help (Thanks mxf)
2011-10-21 18:59:59 +01:00
c5caa9682c
i3bar: don’t reconnect, but exit(0) on EOF
...
Since i3 starts i3bar instances as necessary, EOF is considered a signal to
either shutdown because i3 exited or because it is restarting.
2011-10-20 19:08:41 +01:00
a5be27cb79
Make i3bar get its config from i3 via IPC
...
In order to not duplicate configuration options and make stuff confusing, we
dropped the commandline flags (except for socket_path and bar_id). This means
that you *have to* specify bar_id when starting i3bar. The best way is to let
i3 start i3bar, which it will do automatically for every bar {} configuration
block it finds.
2011-10-19 22:58:19 +01:00
fb4b012013
i3bar: Bugfix: Add tray icon padding when calculating text position (Thanks Bacardi55)
2011-10-10 15:09:39 +01:00
c5e9527abc
i3bar: include xcb_compat.h for older XCB versions (Thanks motif)
2011-10-10 11:37:56 +01:00
a70e2057c8
i3bar: set WM_CLASS and WM_NAME
2011-10-09 14:45:23 +01:00
64a7017c32
i3bar: add modelines to all files
2011-10-09 14:28:20 +01:00
e77f08d1fc
i3bar: handle ConfigureRequests for tray children (fixes gtk3 size issue)
...
Thanks to yvesf for this simple python test script:
from gi.repository import Gtk as gtk
def cb(*a):
print a
def si_popup(*a):
print a
status_icon = gtk.StatusIcon()
status_icon.set_from_stock(gtk.STOCK_OPEN)
status_icon.connect("activate", cb)
gtk.main()
2011-10-09 13:50:46 +01:00
b561b911ee
i3bar: add modeline to src/xcb.c
2011-10-09 13:50:39 +01:00
0c51b57b99
Merge branch 'master' into next
2011-09-19 19:20:18 +01:00
7064cfc2a0
i3bar: Bugfix: Check if the X11 connection is unavailable
...
This fixes the condition where the i3 socket for some reason did not produce an
error, but the X server exited (earlier than i3?) and the left-over i3bar
process would consume 100% CPU.
How to reproduce the problem:
1) Start ./testcases/Xdummy :8
2) Start DISPLAY=:8 i3bar -s <socket path to i3 on :0>
3) Kill the Xdummy
2011-09-19 19:17:25 +01:00
c7ac1f9077
Merge branch 'master' into next
2011-08-25 18:51:02 +02:00
39cff5c31f
i3bar: Bugfix: When receiving EOF, immediately redraw and discard input
2011-08-25 18:46:08 +02:00
9c587a767c
Bugfix: set statusline = NULL, print error messages about EOF/SIGCHLD to stderr (Thanks cls)
2011-08-25 17:10:45 +02:00
eacbf986a0
Merge branch 'master' into next
2011-08-24 18:49:40 +02:00
7af39906da
i3bar: Bugfix: Correctly allocate pixmap for statuslines which are longer than your screen
...
In case of a 1024 px screen and a 1128 px status line, the status line was not
only cut off (it has to be, obviously), but the right part showed some black
pixels.
2011-08-24 18:48:29 +02:00
27ade541a9
Initialize output (fixes compiler warning)
2011-08-24 01:34:56 +02:00
06ba1c0e65
Fix compilation with xcb 0.3.6
2011-08-24 01:18:27 +02:00
1c2c22d117
i3bar: properly end the XEMBED protocol by reparenting the dock clients to root, flush connection before disconnecting
2011-08-24 01:18:27 +02:00
bd2a3363c0
i3bar: tray: little cleanups, more comments
2011-08-24 01:18:27 +02:00
55e503c17b
i3bar: request the appropriate _NET_SYSTEM_TRAY atom for the display we are running on
2011-08-24 01:18:27 +02:00
893878cbcc
i3bar: send XEMBED_EMBEDDED_NOTIFY after reparenting/mapping tray clients
2011-08-24 01:18:27 +02:00
737cd10bdf
i3bar: properly handle the _XEMBED_INFO property
2011-08-24 01:18:27 +02:00
7df43989c9
i3bar: correctly handle multiple tray clients
2011-08-24 01:18:27 +02:00
2046e4112f
i3bar: Correctly handle removal of tray clients
2011-08-24 01:18:27 +02:00
6efa7a754d
i3bar: trigger an update after docking a new client
2011-08-24 01:18:27 +02:00
025dd68f62
i3bar: quick & dirty systray implementation
...
Works correctly only with exactly one dock client on exactly one output. Maybe
not even then. You have been warned. Proof-of-concept code ;).
2011-08-24 01:18:26 +02:00
2f116df901
Merge branch 'master' into next
2011-08-12 23:11:13 +02:00
dddce72bd7
little comment spelling fixes
2011-08-12 23:09:59 +02:00
72ef8a7c19
Pass NULL to XkbOpenDisplay, it will read $DISPLAY itself
2011-08-12 23:09:36 +02:00
3892d616cf
Bugfix: Use correct buffer size, quote workspace names
...
This fixes problems with the workspace 'next' and workspace names longer than
40 characters
2011-08-12 22:57:02 +02:00
7cb7700b02
i3bar: Fixup indentions
2011-08-12 18:43:09 +02:00
fef5a69b09
Mac OS X fixes: include string.h, add strndup(), disable xmllint for the docs
2011-08-01 16:17:59 +02:00
339a7cb8c3
make i3bar use i3’s common.mk
2011-08-01 16:13:19 +02:00
3302b22f71
Bugfix: Delay event-subscription until reconnect (thx aniou)
2011-07-31 18:26:52 +02:00
8d09ed7bf5
Update changelog and copyright, bump version and more
2011-07-31 16:16:17 +02:00
8734337fb5
Stop the reconn-timer before starting it again, else it's running twice
2011-07-15 01:31:02 +02:00
3d05fe7a52
Use cleanup() in child.c
2011-07-10 04:34:18 +02:00
97827372af
Bugfix: Correctly handle EOF on stdin (Thanks woddf2)
2011-07-10 04:31:53 +02:00
778268c9bb
Fix unaligned memory access on sparc (Thanks David Coppa)
2011-05-03 12:38:57 +02:00
b150ec1c47
Apply ugly yajl-compatibility-fix (thx sECuRE)
2011-04-28 20:23:12 +02:00
e7c2b25ddd
Fix compiler-warnings from libev
2011-04-28 19:54:31 +02:00
d31384e955
Revert "Allow space after space"
...
This reverts commit c9334c922de120a08e66cb3a8c340fc1a453bf55.
2011-04-22 01:18:57 +02:00
bf078c673f
Allow space after space
2011-04-22 00:42:24 +02:00
ed5ac7f41d
Implement disabling the workspace buttons („thx“ sECuRE)
2011-04-21 20:24:02 +02:00
26993574f5
Revert "Don't draw on backbuffer, when hiding (thx sECuRE)"
...
This reverts commit f51ba2d7ecf3f560c8ce4d3ab8419ecf6265839c.
This commit introduced a regression, which prevented i3bar to be redrawn
at all in some circumstances. It will later be reintroduced in a bigger
refactoring of event-dependencies
2011-03-21 17:29:11 +01:00
edcc373077
Fix typo in comment (thx sECuRE)
2011-03-20 19:52:20 +01:00
ba748d72ff
Collapse two ChangeGC-calls (thx sECuRE)
2011-03-20 19:50:03 +01:00
52e70c3802
Add Color for focused ws (thx phnom)
2011-03-20 19:29:30 +01:00
16f7574851
Bugfix: Skip inactive outputs, when unmapping
2011-03-19 23:28:10 +01:00
682458f4d7
Don't draw on backbuffer, when hiding (thx sECuRE)
2011-03-19 23:27:50 +01:00
1b2002e1c8
XClearArea can't be used on pixmaps (thx sECuRE)
2011-03-19 23:04:09 +01:00
a847454a42
bugfix: Skip inactive outputs on redraw (thx sECuRE)
2011-03-19 22:30:59 +01:00
aaf60c6321
Don't reallocate the backbuffer on every refresh (thx sECuRE)
2011-03-19 22:27:35 +01:00
2fd7449e29
Add support for I3_SOCKET_PATH-atom
2011-03-19 22:06:08 +01:00
d993f8a3a1
Auto-update NUM_ATOMS by putting it into the enum (thx sECuRE)
2011-03-19 20:58:05 +01:00
5219493ffe
Bugfix: Don't SIGSTOP child in dockmode
2011-03-14 09:24:32 +01:00
7fb6258fbd
Use DISPLAY in XKB-code
2011-03-14 09:20:16 +01:00
dfd566511e
Bugfix: Don't segfault, if child was killed
2011-03-14 09:17:06 +01:00
c8032d552d
Correct minor issues reported by the analyzer.
...
Found with the Clang Static Analyzer.
2011-02-26 03:03:30 +01:00
64f2a7561d
Implement dock-positioning
2011-02-21 15:53:32 +01:00
23a9814090
Correct typo
2011-02-16 19:53:42 +01:00
972be13dc5
Bugfix: _only_ stop child, if hide_on_modifier is set (thx cradle)
2011-02-04 10:05:48 +01:00
ff925f58e8
Bugfix: Use free-workspaces() in xcb-cleanup (thx dothebart)
2011-01-26 12:57:44 +01:00
8fa720d6b9
Bugfix: free() output-names seperately (thx dothebart)
2011-01-26 12:57:38 +01:00
dc7cfeaa4f
Bugfix: Also free() the head of slist/tailq (Thx dothebart)
2011-01-26 01:54:36 +01:00
d9f35859fa
Bugfix: free() text, after drawing it (thx dothebart)
2011-01-26 01:54:36 +01:00
9d22b29166
Bugfix: free() workspace-list of outputs seperately (thx dothebart)
2011-01-26 01:54:36 +01:00
7a7faff96d
Remove superflous FREE_SLIST
2011-01-26 01:54:36 +01:00
da1b65dd86
Bugfix: free() workspace-names seperately (thx dothebart)
2011-01-26 01:54:36 +01:00
cc71c77329
Bugfix: free() command-string, after it is not needed anymore
2011-01-26 01:54:36 +01:00
94ca5c73cc
Bugfix: Test for outputs == NULL
2011-01-26 01:54:36 +01:00
c9ee3eb21e
Change default socketpath to /tmp/i3-ipc.sock
2011-01-22 17:41:24 +01:00
1369e36d7c
Use tree-command for workspace-switching
2011-01-14 19:16:52 +01:00
4762152e1c
Display socket-path in connection-error-message
2011-01-14 17:33:40 +01:00
caca38b68e
Use I3SOCK environment-variable
2011-01-11 05:03:14 +01:00
29f153c634
Separate the lines received in a single read.
...
Fixes the case where multiple lines are read in a single read syscall
(it could be better optimized in the future). Also fixes a memory
corruption issue when rec == 0.
2011-01-08 14:57:00 +01:00
34dd4bc89e
Bugfix: If hide-on-modifier is set, stop the child after starting
2011-01-06 17:35:23 +01:00
2183435da6
Bugfix: Recreate double-buffers on reconfiguring (thx sECuRE)
2011-01-06 17:28:21 +01:00
497a091fbb
Use strerror() for more usefull errormessages
2011-01-01 16:55:13 +01:00
b40b921228
Fix typo (thx julien)
2011-01-01 15:36:30 +01:00
08a5a2fdb0
Only use font_info after we know, the request succeded
2011-01-01 15:19:17 +01:00
600c4ae95c
Use "*buffer == '\0'" instead of "strlen(buffer) == 0" (thanks dothebart)
2011-01-01 15:08:43 +01:00
3daab599ca
Bugfix: Recover from closed socket
2010-12-26 20:03:06 +01:00
3c85c514d4
Merge branch 'master' into tree
2010-12-26 15:27:32 +01:00
ff0522fe95
Bugfix: Send child a SIGCONT, so it reacts to SIGTERM (no zombies \o/)
2010-12-26 14:48:39 +01:00
cdf56f16bf
Revert "Double-fork() to avoid zombies"
...
This reverts commit a4eafae108b63f5df76eea2958aee8cf95cb1ad6.
2010-12-26 14:48:14 +01:00
a39db9ae82
Remove unnecessary declaration
2010-12-23 16:50:48 +01:00
94a8273b09
Merge branch 'next'
2010-12-23 16:34:19 +01:00
537851b929
Switch back ws_fg and ws_bg (Thanks julien)
2010-12-03 17:59:28 +01:00
a3e37b059f
Switch back ws_fg and ws_bg (Thanks julien)
2010-12-03 17:59:16 +01:00
3de12beef6
make i3bar work with tree branch again (current_workspace is a string now)
2010-11-22 09:44:29 +01:00
a88f7fb392
We don't need sig_quit
2010-11-11 03:01:40 +01:00
8301d3d9f3
Send a SIGTERM instead of a SIGQUIT to exit the child
2010-11-11 02:59:17 +01:00
33202881c4
Handle SIGTERM/-INT/-HUP
2010-11-11 02:57:39 +01:00
d5e3b58d47
-V actually does not take an argument (yet)
2010-11-11 02:57:25 +01:00
eada483765
Double-fork() to avoid zombies
2010-11-10 18:46:47 +01:00
23b62f621d
Add support for bar_fg and bar_bg
2010-11-04 13:46:50 +01:00
Thomas Adam