i3 User’s Guide =============== Michael Stapelberg March 2010 This document contains all the information you need to configure and use the i3 window manager. If it does not, please contact me on IRC, Jabber or E-Mail and I’ll help you out. == Default keybindings For the "too long; didn’t read" people, here is an overview of the default keybindings (click to see the full size image): *Keys to use with Mod1 (alt):* image:keyboard-layer1.png["Keys to use with Mod1 (alt)",width=600,link="keyboard-layer1.png"] *Keys to use with Shift+Mod1:* image:keyboard-layer2.png["Keys to use with Shift+Mod1",width=600,link="keyboard-layer2.png"] As i3 uses keycodes in the default configuration, it does not matter which keyboard layout you actually use. The key positions are what matters (of course you can also use keysymbols, see below). The red keys are the modifiers you need to press (by default), the blue keys are your homerow. == Using i3 === Opening terminals and moving around One very basic operation is opening a new terminal. By default, the keybinding for this is Mod1+Enter, that is Alt+Enter in the default configuration. By pressing Mod1+Enter, a new terminal will be opened. It will fill the whole space available on your screen. image:single_terminal.png[Single terminal] It is important to keep in mind that i3 uses a table to manage your windows. At the moment, you have exactly one column and one row which leaves you with one cell. In this cell there is a container, which is where your new terminal is opened. If you now open another terminal, you still have only one cell. However, the container in that cell holds both of your terminals. So, a container is just a group of clients with a specific layout. Containers can be resized by adjusting the size of the cell that holds them. image:two_terminals.png[Two terminals] To move the focus between the two terminals, you use the direction keys which you may know from the editor +vi+. However, in i3, your homerow is used for these keys (in +vi+, the keys are shifted to the left by one for compatibility with most keyboard layouts). Therefore, +Mod1+J+ is left, +Mod1+K+ is down, +Mod1+L+ is up and `Mod1+;` is right. So, to switch between the terminals, use +Mod1+K+ or +Mod1+L+. To create a new row/column (and a new cell), you can simply move a terminal (or any other window) in the direction you want to expand your table. So, let’s expand the table to the right by pressing `Mod1+Shift+;`. image:two_columns.png[Two columns] === Changing container modes A container can have the following modes: default:: Windows are sized so that every window gets an equal amount of space in the container. stacking:: Only the focused window in the container is displayed. You get a list of windows at the top of the container. tabbed:: The same principle as +stacking+, but the list of windows at the top is only a single line which is vertically split. To switch modes, press +Mod1+e+ for default, +Mod1+h+ for stacking and +Mod1+w+ for tabbed. image:modes.png[Container modes] === Toggling fullscreen mode for a window To display a window fullscreen or to go out of fullscreen mode again, press +Mod1+f+. There is also a global fullscreen mode in i3 in which the client will use all available outputs. To use it, or to get out of it again, press +Mod1+Shift+f+. === Opening other applications Aside from opening applications from a terminal, you can also use the handy +dmenu+ which is opened by pressing +Mod1+v+ by default. Just type the name (or a part of it) of the application which you want to open. The application typed has to be in your +$PATH+ for this to work. Additionally, if you have applications you open very frequently, you can create a keybinding for starting the application directly. See the section "Configuring i3" for details. === Closing windows If an application does not provide a mechanism for closing (most applications provide a menu, the escape key or a shortcut like +Control+W+ to close), you can press +Mod1+Shift+q+ to kill a window. For applications which support the WM_DELETE protocol, this will correctly close the application (saving any modifications or doing other cleanup). If the application doesn’t support the WM_DELETE protocol your X server will kill the window and the behaviour depends on the application. === Using workspaces Workspaces are an easy way to group a set of windows. By default, you are on the first workspace, as the bar on the bottom left indicates. To switch to another workspace, press +Mod1+num+ where +num+ is the number of the workspace you want to use. If the workspace does not exist yet, it will be created. A common paradigm is to put the web browser on one workspace, communication applications (+mutt+, +irssi+, ...) on another one, and the ones with which you work, on the third one. Of course, there is no need to follow this approach. If you have multiple screens, a workspace will be created on each screen at startup. If you open a new workspace, it will be bound to the screen you created it on. When you switch to a workspace on another screen, i3 will set focus to that screen. === Moving windows to workspaces To move a window to another workspace, simply press +Mod1+Shift+num+ where +num+ is (like when switching workspaces) the number of the target workspace. Similarly to switching workspaces, the target workspace will be created if it does not yet exist. === Resizing columns/rows To resize columns or rows, just grab the border between the two columns/rows and move it to the wanted size. Please keep in mind that each cell of the table holds a +container+ and thus you cannot horizontally resize single windows. If you need applications with different horizontal sizes, place them in seperate cells one above the other. See <> for how to configure i3 to be able to resize columns/rows with your keyboard. === Restarting i3 inplace To restart i3 inplace (and thus get into a clean state if there is a bug, or to upgrade to a newer version of i3) you can use +Mod1+Shift+r+. Be aware, though, that this kills your current layout and all the windows you have opened will be put in a default container in only one cell. Saving layouts will be implemented in a later version. === Exiting i3 To cleanly exit i3 without killing your X server, you can use +Mod1+Shift+e+. === Snapping Snapping is a mechanism to increase/decrease the colspan/rowspan of a container. Colspan/rowspan is the number of columns/rows a specific cell of the table consumes. This is easier explained by giving an example, so take the following layout: image:snapping.png[Snapping example] To use the full size of your screen, you can now snap container 3 downwards by pressing +Mod1+Control+k+ (or snap container 2 rightwards). === Floating Floating mode is the opposite of tiling mode. The position and size of a window are not managed by i3, but by you. Using this mode violates the tiling paradigm but can be useful for some corner cases like "Save as" dialog windows, or toolbar windows (GIMP or similar). You can enable floating mode for a window by pressing +Mod1+Shift+Space+. By dragging the window’s titlebar with your mouse you can move the window around. By grabbing the borders and moving them you can resize the window. Bindings for doing this with your keyboard will follow. Floating windows are always on top of tiling windows. == Configuring i3 This is where the real fun begins ;-). Most things are very dependant on your ideal working environment so we can’t make reasonable defaults for them. While not using a programming language for the configuration, i3 stays quite flexible in regards to the things you usually want your window manager to do. For example, you can configure bindings to jump to specific windows, you can set specific applications to start on specific workspaces, you can automatically start applications, you can change the colors of i3, and you can bind your keys to do useful things. To change the configuration of i3, copy +/etc/i3/config+ to +\~/.i3/config+ (or +~/.config/i3/config+ if you like the XDG directory scheme) and edit it with a text editor. === Comments It is possible and recommended to use comments in your configuration file to properly document your setup for later reference. Comments are started with a # and can only be used at the beginning of a line: *Examples*: ------------------- # This is a comment ------------------- === Fonts i3 uses X core fonts (not Xft) for rendering window titles and the internal workspace bar. You can use +xfontsel(1)+ to generate such a font description. To see special characters (Unicode), you need to use a font which supports the ISO-10646 encoding. *Syntax*: ------------------------------ font ------------------------------ *Examples*: -------------------------------------------------------------- font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1 -------------------------------------------------------------- === Keyboard bindings A keyboard binding makes i3 execute a command (see below) upon pressing a specific key. i3 allows you to bind either on keycodes or on keysyms (you can also mix your bindings, though i3 will not protect you from overlapping ones). * A keysym (key symbol) is a description for a specific symbol, like "a" or "b", but also more strange ones like "underscore" instead of "_". These are the ones you use in Xmodmap to remap your keys. To get the current mapping of your keys, use +xmodmap -pke+. * Keycodes do not need to have a symbol assigned (handy for some hotkeys on some notebooks) and they will not change their meaning as you switch to a different keyboard layout (when using +xmodmap+). My recommendation is: If you often switch keyboard layouts but you want to keep your bindings in the same physical location on the keyboard, use keycodes. If you don’t switch layouts, and want a clean and simple config file, use keysyms. *Syntax*: ---------------------------------- bindsym [Modifiers+]keysym command bind [Modifiers+]keycode command ---------------------------------- *Examples*: -------------------------------- # Fullscreen bindsym Mod1+f f # Restart bindsym Mod1+Shift+r restart # Notebook-specific hotkeys bind 214 exec /home/michael/toggle_beamer.sh -------------------------------- Available Modifiers: Mod1-Mod5, Shift, Control:: Standard modifiers, see +xmodmap(1)+ Mode_switch:: Unlike other window managers, i3 can use Mode_switch as a modifier. This allows you to remap capslock (for example) to Mode_switch and use it for both: typing umlauts or special characters 'and' having some comfortably reachable key bindings. For example, when typing, capslock+1 or capslock+2 for switching workspaces is totally convenient. Try it :-). === The floating modifier To move floating windows with your mouse, you can either grab their titlebar or configure the so called floating modifier which you can then press and click anywhere in the window itself to move it. The most common setup is to use the same key you use for managing windows (Mod1 for example). Then you can press Mod1, click into a window using your left mouse button, and drag it to the position you want. When holding the floating modifier, you can resize a floating window by pressing the right mouse button on it and moving around while holding it. If you hold the shift button as well, the resize will be proportional. *Syntax*: -------------------------------- floating_modifier -------------------------------- *Examples*: -------------------------------- floating_modifier Mod1 -------------------------------- === Layout mode for new containers This option determines in which mode new containers will start. See also <>. *Syntax*: --------------------------------------------- new_container new_container stack-limit --------------------------------------------- *Examples*: --------------------- new_container tabbed --------------------- === Border style for new windows This option determines which border style new windows will have. *Syntax*: --------------------------------------------- new_window --------------------------------------------- *Examples*: --------------------- new_window bp --------------------- === Variables As you learned in the section about keyboard bindings, you will have to configure lots of bindings containing modifier keys. If you want to save yourself some typing and be able to change the modifier you use later, variables can be handy. *Syntax*: -------------- set name value -------------- *Examples*: ------------------------ set $m Mod1 bindsym $m+Shift+r restart ------------------------ Variables are directly replaced in the file when parsing. There is no fancy handling and there are absolutely no plans to change this. If you need a more dynamic configuration you should create a little script which generates a configuration file and run it before starting i3 (for example in your +.xsession+ file). === Automatically putting clients on specific workspaces [[assign_workspace]] It is recommended that you match on window classes wherever possible because some applications first create their window, and then worry about setting the correct title. Firefox with Vimperator comes to mind. The window starts up being named Firefox, and only when Vimperator is loaded does the title change. As i3 will get the title as soon as the application maps the window (mapping means actually displaying it on the screen), you’d need to have to match on 'Firefox' in this case. You can prefix or suffix workspaces with a `~` to specify that matching clients should be put into floating mode. If you specify only a `~`, the client will not be put onto any workspace, but will be set floating on the current one. *Syntax*: ------------------------------------------------------------ assign ["]window class[/window title]["] [→] [~ | workspace] ------------------------------------------------------------ *Examples*: ---------------------- assign urxvt 2 assign urxvt → 2 assign "urxvt" → 2 assign "urxvt/VIM" → 3 assign "gecko" → ~4 assign "xv/MPlayer" → ~ ---------------------- Note that the arrow is not required, it just looks good :-). If you decide to use it, it has to be a UTF-8 encoded arrow, not "->" or something like that. === Automatically starting applications on i3 startup By using the +exec+ keyword outside a keybinding, you can configure which commands will be performed by i3 on initial startup (not when restarting i3 in-place however). These commands will be run in order. *Syntax*: ------------ exec command ------------ *Examples*: -------------------------------- exec sudo i3status | dzen2 -dock -------------------------------- === Automatically putting workspaces on specific screens [[workspace_screen]] If you assign clients to workspaces, it might be handy to put the workspaces on specific screens. Also, the assignment of workspaces to screens will determine which workspace i3 uses for a new screen when adding screens or when starting (e.g., by default it will use 1 for the first screen, 2 for the second screen and so on). *Syntax*: ---------------------------------- workspace output ---------------------------------- The 'output' is the name of the RandR output you attach your screen to. On a laptop, you might have VGA1 and LVDS1 as output names. You can see the available outputs by running +xrandr --current+. *Examples*: --------------------------- workspace 1 output LVDS1 workspace 5 output VGA1 --------------------------- === Named workspaces If you always have a certain arrangement of workspaces, you might want to give them names (of course UTF-8 is supported): *Syntax*: --------------------------------------- workspace workspace output name --------------------------------------- For more details about the 'output' part of this command, see above. *Examples*: -------------------------- workspace 1 www workspace 2 work workspace 3 i ♥ workspaces -------------------------- === Changing colors You can change all colors which i3 uses to draw the window decorations and the bottom bar. *Syntax*: -------------------------------------------- colorclass border background text -------------------------------------------- Where colorclass can be one of: client.focused:: A client which currently has the focus. client.focused_inactive:: A client which is the focused one of its container, but it does not have the focus at the moment. client.unfocused:: A client which is not the focused one of its container. client.urgent:: A client which has its urgency hint activated. bar.focused:: The current workspace in the bottom bar. bar.unfocused:: All other workspaces in the bottom bar. bar.urgent:: A workspace which has at least one client with an activated urgency hint. Colors are in HTML hex format (#rrggbb), see the following example: *Examples*: -------------------------------------- # class border backgr. text client.focused #2F343A #900000 #FFFFFF -------------------------------------- Note that for the window decorations, the color around the child window is the background color, and the border color is only the two thin lines at the top of the window. === Interprocess communication i3 uses unix sockets to provide an IPC interface. This allows third-party programs to get information from i3, such as the current workspaces (to display a workspace bar), and to control i3. To enable it, you have to configure a path where the unix socket will be stored. The default path is +/tmp/i3-ipc.sock+. *Examples*: ---------------------------- ipc-socket /tmp/i3-ipc.sock ---------------------------- You can then use the +i3-msg+ application to perform any command listed in the next section. === Disable focus follows mouse If you have a setup where your mouse usually is in your way (like a touchpad on your laptop which you do not want to disable completely), you might want to disable 'focus follows mouse' and control focus only by using your keyboard. The mouse will still be useful inside the currently active window (for example to click on links in your browser window). *Syntax*: ---------------------------- focus_follows_mouse ---------------------------- *Examples*: ---------------------- focus_follows_mouse no ---------------------- == List of commands === Manipulating layout To change the layout of the current container to stacking, use +s+, for default use +d+ and for tabbed, use +T+. To make the current client (!) fullscreen, use +f+, to make it span all outputs, use +fg+, to make it floating (or tiling again) use +t+: *Examples*: -------------- bindsym Mod1+s s bindsym Mod1+l d bindsym Mod1+w T # Toggle fullscreen bindsym Mod1+f f # Toggle global fullscreen bindsym Mod1+Shift+f fg # Toggle floating/tiling bindsym Mod1+t t -------------- === Focusing/Moving/Snapping clients/containers/screens To change the focus, use one of the +h+, +j+, +k+ and +l+ commands, meaning left, down, up, right (respectively). To focus a container, prefix it with +wc+. To focus a screen, prefix it with +ws+. The same principle applies for moving and snapping: just prefix the command with +m+ when moving and with +s+ when snapping: *Examples*: ---------------------- # Focus clients on the left, bottom, top, right: bindsym Mod1+j h bindsym Mod1+k j bindsym Mod1+j k bindsym Mod1+semicolon l # Move client to the left, bottom, top, right: bindsym Mod1+j mh bindsym Mod1+k mj bindsym Mod1+j mk bindsym Mod1+semicolon ml # Snap client to the left, bottom, top, right: bindsym Mod1+j sh bindsym Mod1+k sj bindsym Mod1+j sk bindsym Mod1+semicolon sl # Focus container on the left, bottom, top, right: bindsym Mod3+j wch … ---------------------- === Changing workspaces/moving clients to workspaces To change to a specific workspace, the command is just the number of the workspace, e.g. +1+ or +3+. To move the current client to a specific workspace, prefix the number with an +m+. You can also switch to the next and previous workspace with the commands +nw+ and +pw+, which is handy, for example, if you have workspace 1, 3, 4 and 9 and you want to cycle through them with a single key combination. *Examples*: ------------------------- bindsym Mod1+1 1 bindsym Mod1+2 2 ... bindsym Mod1+Shift+1 m1 bindsym Mod1+Shift+2 m2 ... bindsym Mod1+o nw bindsym Mod1+p pw ------------------------- [[resizingconfig]] === Resizing columns/rows If you want to resize columns/rows using your keyboard, you can use the +resize+ command, I recommend using it inside a so called +mode+: .Example: Configuration file, defining a mode for resizing ---------------------------------------------------------------------- mode "resize" { # These bindings trigger as soon as you enter the resize mode # They resize the border in the direction you pressed, e.g. # when pressing left, the window is resized so that it has # more space on its left bindsym n resize left -10 bindsym Shift+n resize left +10 bindsym r resize bottom +10 bindsym Shift+r resize bottom -10 bindsym t resize top -10 bindsym Shift+t resize top +10 bindsym d resize right +10 bindsym Shift+d resize right -10 bind 36 mode default } # Enter resize mode bindsym Mod1+r mode resize ---------------------------------------------------------------------- === Jumping to specific windows Often when in a multi-monitor environment, you want to quickly jump to a specific window. For example, while working on workspace 3 you may want to jump to your mail client to email your boss that you’ve achieved some important goal. Instead of figuring out how to navigate to your mailclient, it would be more convenient to have a shortcut. *Syntax*: ---------------------------------------------------- jump ["]window class[/window title]["] jump workspace [ column row ] ---------------------------------------------------- You can either use the same matching algorithm as in the +assign+ command (see above) or you can specify the position of the client if you always use the same layout. *Examples*: -------------------------------------- # Get me to the next open VIM instance bindsym Mod1+a jump "urxvt/VIM" -------------------------------------- === VIM-like marks (mark/goto) [[vim_like_marks]] This feature is like the jump feature: It allows you to directly jump to a specific window (this means switching to the appropriate workspace and setting focus to the windows). However, you can directly mark a specific window with an arbitrary label and use it afterwards. You do not need to ensure that your windows have unique classes or titles, and you do not need to change your configuration file. As the command needs to include the label with which you want to mark the window, you cannot simply bind it to a key. +i3-input+ is a tool created for this purpose: It lets you input a command and sends the command to i3. It can also prefix this command and display a custom prompt for the input dialog. *Syntax*: ----------------- mark goto ----------------- *Examples*: --------------------------------------- # Read 1 character and mark the current window with this character bindsym Mod1+m exec i3-input -p 'mark ' -l 1 -P 'Mark: ' # Read 1 character and go to the window with the character bindsym Mod1+g exec i3-input -p 'goto ' -l 1 -P 'Goto: ' --------------------------------------- Alternatively, if you do not want to mess with +i3-input+, you could create seperate bindings for a specific set of labels and then only use those labels. === Traveling the focus stack This mechanism can be thought of as the opposite of the +jump+ command. It travels the focus stack and jumps to the window which had focus previously. *Syntax*: -------------- focus [number] | floating | tiling | ft -------------- Where +number+ by default is 1 meaning that the next client in the focus stack will be selected. The special values have the following meaning: floating:: The next floating window is selected. tiling:: The next tiling window is selected. ft:: If the current window is floating, the next tiling window will be selected; and vice-versa. === Changing border style To change the border of the current client, you can use +bn+ to use the normal border (including window title), +bp+ to use a 1-pixel border (no window title) and +bb+ to make the client borderless. There is also +bt+ which will toggle the different border styles. *Examples*: ------------------ bindsym Mod1+t bn bindsym Mod1+y bp bindsym Mod1+u bb ------------------ [[stack-limit]] === Changing the stack-limit of a container If you have a single container with a lot of windows inside it (say, more than 10), the default layout of a stacking container can get a little unhandy. Depending on your screen’s size, you might end up seeing only half of the titlebars for each window in the container. Using the +stack-limit+ command, you can limit the number of rows or columns in a stacking container. i3 will create columns or rows (depending on what you limited) automatically as needed. *Syntax*: -------------------------------- stack-limit -------------------------------- *Examples*: ------------------- # I always want to have two window titles in one line stack-limit cols 2 # Not more than 5 rows in this stacking container stack-limit rows 5 ------------------- image:stacklimit.png[Container limited to two columns] === Reloading/Restarting/Exiting You can make i3 reload its configuration file with +reload+. You can also restart i3 inplace with the +restart+ command to get it out of some weird state (if that should ever happen) or to perform an upgrade without having to restart your X session. However, your layout is not preserved at the moment, meaning that all open windows will end up in a single container in default layout after the restart. To exit i3 properly, you can use the +exit+ command, however you don’t need to (simply killing your X session is fine as well). *Examples*: ---------------------------- bindsym Mod1+Shift+r restart bindsym Mod1+Shift+w reload bindsym Mod1+Shift+e exit ---------------------------- == Multiple monitors [[multi_monitor]] As you can see in the goal list on the website, i3 was specifically developed with support for multiple monitors in mind. This section will explain how to handle multiple monitors. When you have only one monitor, things are simple. You usually start with workspace 1 on your monitor and open new ones as you need them. When you have more than one monitor, each monitor will get an initial workspace. The first monitor gets 1, the second gets 2 and a possible third would get 3. When you switch to a workspace on a different monitor, i3 will switch to that monitor and then switch to the workspace. This way, you don’t need shortcuts to switch to a specific monitor, and you don’t need to remember where you put which workspace. New workspaces will be opened on the currently active monitor. It is not possible to have a monitor without a workspace. The idea of making workspaces global is based on the observation that most users have a very limited set of workspaces on their additional monitors. They are often used for a specific task (browser, shell) or for monitoring several things (mail, IRC, syslog, …). Thus, using one workspace on one monitor and "the rest" on the other monitors often makes sense. However, as you can create an unlimited number of workspaces in i3 and tie them to specific screens, you can have the "traditional" approach of having X workspaces per screen by changing your configuration (using modes, for example). === Configuring your monitors To help you get going if you have never used multiple monitors before, here is a short overview of the xrandr options which will probably be of interest to you. It is always useful to get an overview of the current screen configuration. Just run "xrandr" and you will get an output like the following: ------------------------------------------------------------------------------- $ xrandr Screen 0: minimum 320 x 200, current 1280 x 800, maximum 8192 x 8192 VGA1 disconnected (normal left inverted right x axis y axis) LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 261mm x 163mm 1280x800 60.0*+ 50.0 1024x768 85.0 75.0 70.1 60.0 832x624 74.6 800x600 85.1 72.2 75.0 60.3 56.2 640x480 85.0 72.8 75.0 59.9 720x400 85.0 640x400 85.1 640x350 85.1 -------------------------------------------------------------------------------------- Several things are important here: You can see that +LVDS1+ is connected (of course, it is the internal flat panel) but +VGA1+ is not. If you have a monitor connected to one of the ports but xrandr still says "disconnected", you should check your cable, monitor or graphics driver. The maximum resolution you can see at the end of the first line is the maximum combined resolution of your monitors. By default, it is usually too low and has to be increased by editing +/etc/X11/xorg.conf+. So, say you connected VGA1 and want to use it as an additional screen: ------------------------------------------- xrandr --output VGA1 --auto --left-of LVDS1 ------------------------------------------- This command makes xrandr try to find the native resolution of the device connected to +VGA1+ and configures it to the left of your internal flat panel. When running "xrandr" again, the output looks like this: ------------------------------------------------------------------------------- $ xrandr Screen 0: minimum 320 x 200, current 2560 x 1024, maximum 8192 x 8192 VGA1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 338mm x 270mm 1280x1024 60.0*+ 75.0 1280x960 60.0 1152x864 75.0 1024x768 75.1 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 72.8 75.0 66.7 60.0 720x400 70.1 LVDS1 connected 1280x800+1280+0 (normal left inverted right x axis y axis) 261mm x 163mm 1280x800 60.0*+ 50.0 1024x768 85.0 75.0 70.1 60.0 832x624 74.6 800x600 85.1 72.2 75.0 60.3 56.2 640x480 85.0 72.8 75.0 59.9 720x400 85.0 640x400 85.1 640x350 85.1 ------------------------------------------------------------------------------- Please note that i3 uses exactly the same API as xrandr does, so it will see only what you can see in xrandr. See also <> for more examples of multi-monitor setups. === Interesting configuration for multi-monitor environments There are several things to configure in i3 which may be interesting if you have more than one monitor: 1. You can specify which workspace should be put on which screen. This allows you to have a different set of workspaces when starting than just 1 for the first monitor, 2 for the second and so on. See <>. 2. If you want some applications to generally open on the bigger screen (MPlayer, Firefox, …), you can assign them to a specific workspace, see <>. 3. If you have many workspaces on many monitors, it might get hard to keep track of which window you put where. Thus, you can use vim-like marks to quickly switch between windows. See <>. == i3 and the rest of your software world === Displaying a status line A very common thing amongst users of exotic window managers is a status line at some corner of the screen. It is an often superior replacement to the widget approach you have in the task bar of a traditional desktop environment. If you don’t already have your favorite way of generating such a status line (self-written scripts, conky, …), then i3status is the recommended tool for this task. It was written in C with the goal of using as few syscalls as possible to reduce the time your CPU is woken up from sleep states. Regardless of which application you use to generate the status line, you want to make sure that the application does one of the following things: 1. Register as a dock window using EWMH hints. This will make i3 position the window above the workspace bar but below every other client. This is the recommended way, but in case of dzen2, for example, you need to check out the source of dzen2 from subversion, as the -dock option is not present in the released versions. 2. Overlay the internal workspace bar. This method will not waste any space on the workspace bar, however, it is rather hackish. Just configure the output window to be over the workspace bar (say -x 200 and -y 780 if your screen is 800 px height). The planned solution for this problem is to make the workspace bar optional and switch to a third party application completely (dzen2 for example) which will then contain the workspace bar. === Giving presentations (multi-monitor) When giving a presentation, you typically want the audience to see what you see on your screen and then go through a series of slides (if the presentation is simple). For more complex presentations, you might want to have some notes which only you can see on your screen, while the audience can only see the slides. [[presentations]] ==== Case 1: everybody gets the same output This is the simple case. You connect your computer to the video projector, turn on both (computer and video projector) and configure your X server to clone the internal flat panel of your computer to the video output: ----------------------------------------------------- xrandr --output VGA1 --mode 1024x768 --same-as LVDS1 ----------------------------------------------------- i3 will then use the lowest common subset of screen resolutions, the rest of your screen will be left untouched (it will show the X background). So, in our example, this would be 1024x768 (my notebook has 1280x800). ==== Case 2: you can see more than your audience This case is a bit harder. First of all, you should configure the VGA output somewhere near your internal flat panel, say right of it: ----------------------------------------------------- xrandr --output VGA1 --mode 1024x768 --right-of LVDS1 ----------------------------------------------------- Now, i3 will put a new workspace (depending on your settings) on the new screen and you are in multi-monitor mode (see <>). Because i3 is not a compositing window manager, there is no ability to display a window on two screens at the same time. Instead, your presentation software needs to do this job (that is, open a window on each screen).