gri3-wm/testcases/t/124-move.t

249 lines
7.7 KiB
Perl

#!perl
# vim:ts=4:sw=4:expandtab
#
# Please read the following documents before working on tests:
# • http://build.i3wm.org/docs/testsuite.html
# (or docs/testsuite)
#
# • http://build.i3wm.org/docs/lib-i3test.html
# (alternatively: perldoc ./testcases/lib/i3test.pm)
#
# • http://build.i3wm.org/docs/ipc.html
# (or docs/ipc)
#
# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
# (unless you are already familiar with Perl)
#
# Tests moving. Basically, there are four different code-paths:
# 1) move a container which cannot be moved (single container on a workspace)
# 2) move a container before another single container
# 3) move a container inside another container
# 4) move a container in a different direction so that we need to go up in tree
#
use i3test;
my $i3 = i3(get_socket_path());
my $tmp = fresh_workspace;
######################################################################
# 1) move a container which cannot be moved
######################################################################
cmd 'open';
my $old_content = get_ws_content($tmp);
is(@{$old_content}, 1, 'one container on this workspace');
my $first = $old_content->[0]->{id};
cmd 'move left';
cmd 'move right';
cmd 'move up';
cmd 'move down';
my $content = get_ws_content($tmp);
is_deeply($old_content, $content, 'workspace unmodified after useless moves');
######################################################################
# 2) move a container before another single container
######################################################################
cmd 'open';
$content = get_ws_content($tmp);
is(@{$content}, 2, 'two containers on this workspace');
my $second = $content->[1]->{id};
is($content->[0]->{id}, $first, 'first container unmodified');
# Move the second container before the first one (→ swap them)
cmd 'move left';
$content = get_ws_content($tmp);
is($content->[0]->{id}, $second, 'first container modified');
# We should not be able to move any further
cmd 'move left';
$content = get_ws_content($tmp);
is($content->[0]->{id}, $second, 'first container unmodified');
# Now move in the other direction
cmd 'move right';
$content = get_ws_content($tmp);
is($content->[0]->{id}, $first, 'first container modified');
# We should not be able to move any further
cmd 'move right';
$content = get_ws_content($tmp);
is($content->[0]->{id}, $first, 'first container unmodified');
######################################################################
# 3) move a container inside another container
######################################################################
# Split the current (second) container and create a new container on workspace
# level. Our layout looks like this now:
# --------------------------
# | | second | |
# | first | ------ | third |
# | | | |
# --------------------------
cmd 'split v';
cmd 'focus parent';
cmd 'open';
$content = get_ws_content($tmp);
is(@{$content}, 3, 'three containers on this workspace');
my $third = $content->[2]->{id};
cmd 'move left';
$content = get_ws_content($tmp);
is(@{$content}, 2, 'only two containers on this workspace');
my $nodes = $content->[1]->{nodes};
is($nodes->[0]->{id}, $second, 'second container on top');
is($nodes->[1]->{id}, $third, 'third container on bottom');
######################################################################
# move it inside the split container
######################################################################
cmd 'move up';
$nodes = get_ws_content($tmp)->[1]->{nodes};
is($nodes->[0]->{id}, $third, 'third container on top');
is($nodes->[1]->{id}, $second, 'second container on bottom');
# move it outside again
cmd 'move left';
is_num_children($tmp, 3, 'three containers after moving left');
# due to automatic flattening/cleanup, the remaining split container
# will be replaced by the con itself, so we will still have 3 nodes
cmd 'move right';
is_num_children($tmp, 2, 'two containers after moving right (flattening)');
######################################################################
# 4) We create two v-split containers on the workspace, then we move
# all Cons from the left v-split to the right one. The old vsplit
# container needs to be closed. Verify that it will be closed.
######################################################################
my $otmp = fresh_workspace;
cmd "open";
cmd "open";
cmd "split v";
cmd "open";
cmd 'focus left';
cmd "split v";
cmd "open";
cmd "move right";
cmd 'focus left';
cmd "move right";
is_num_children($otmp, 1, 'only one node on this workspace');
######################################################################
# 5) test moving floating containers.
######################################################################
$tmp = fresh_workspace;
my $floatwin = open_floating_window;
my ($absolute_before, $top_before) = $floatwin->rect;
cmd 'move left';
sync_with_i3;
my ($absolute, $top) = $floatwin->rect;
is($absolute->x, ($absolute_before->x - 10), 'moved 10 px to the left');
is($absolute->y, $absolute_before->y, 'y not changed');
is($absolute->width, $absolute_before->width, 'width not changed');
is($absolute->height, $absolute_before->height, 'height not changed');
$absolute_before = $absolute;
$top_before = $top;
cmd 'move right';
sync_with_i3;
($absolute, $top) = $floatwin->rect;
is($absolute->x, ($absolute_before->x + 10), 'moved 10 px to the right');
is($absolute->y, $absolute_before->y, 'y not changed');
is($absolute->width, $absolute_before->width, 'width not changed');
is($absolute->height, $absolute_before->height, 'height not changed');
$absolute_before = $absolute;
$top_before = $top;
cmd 'move up';
sync_with_i3;
($absolute, $top) = $floatwin->rect;
is($absolute->x, $absolute_before->x, 'x not changed');
is($absolute->y, ($absolute_before->y - 10), 'moved 10 px up');
is($absolute->width, $absolute_before->width, 'width not changed');
is($absolute->height, $absolute_before->height, 'height not changed');
$absolute_before = $absolute;
$top_before = $top;
cmd 'move down';
sync_with_i3;
($absolute, $top) = $floatwin->rect;
is($absolute->x, $absolute_before->x, 'x not changed');
is($absolute->y, ($absolute_before->y + 10), 'moved 10 px up');
is($absolute->width, $absolute_before->width, 'width not changed');
is($absolute->height, $absolute_before->height, 'height not changed');
$absolute_before = $absolute;
$top_before = $top;
######################################################################
# 6) test moving floating containers with a specific amount of px
######################################################################
cmd 'move left 20 px';
sync_with_i3;
($absolute, $top) = $floatwin->rect;
is($absolute->x, ($absolute_before->x - 20), 'moved 20 px to the left');
is($absolute->y, $absolute_before->y, 'y not changed');
is($absolute->width, $absolute_before->width, 'width not changed');
is($absolute->height, $absolute_before->height, 'height not changed');
######################################################################
# 6) test moving floating window to a specified position
# and to absolute center
######################################################################
$tmp = fresh_workspace;
open_floating_window; my @floatcon;
cmd 'move position 5 px 15 px';
@floatcon = @{get_ws($tmp)->{floating_nodes}};
is($floatcon[0]->{rect}->{x}, 5, 'moved to position 5 x');
is($floatcon[0]->{rect}->{y}, 15, 'moved to position 15 y');
cmd 'move absolute position center';
@floatcon = @{get_ws($tmp)->{floating_nodes}};
my $center_x = int($x->root->rect->width/2) - int($floatcon[0]->{rect}->{width}/2);
my $center_y = int($x->root->rect->height/2) - int($floatcon[0]->{rect}->{height}/2);
is($floatcon[0]->{rect}->{x}, $center_x, "moved to center at position $center_x x");
is($floatcon[0]->{rect}->{y}, $center_y, "moved to center at position $center_y y");
done_testing;