Merge branch 'master' into core-updates

Makefile.am

@@ -410,6 +410,7 @@ SH_TESTS =					\
   tests/guix-gc.sh				\
   tests/guix-hash.sh				\
   tests/guix-pack.sh				\
+  tests/guix-pack-localstatedir.sh		\
   tests/guix-pack-relocatable.sh		\
   tests/guix-package.sh				\
   tests/guix-package-net.sh			\
@@ -600,13 +601,11 @@ AM_DISTCHECK_CONFIGURE_FLAGS =			\
   --enable-daemon				\
   ac_cv_guix_test_root="$(GUIX_TEST_ROOT)"
 
-# The self-contained tarball.  Add 'glibc-utf8-locales' along with glibc just
+# The self-contained tarball.
-# so 'etc/profile' defines 'GUIX_LOCPATH' pointing to a valid set of locales.
 guix-binary.%.tar.xz:
 	$(AM_V_GEN)GUIX_PACKAGE_PATH=					\
 	tarball=`$(top_builddir)/pre-inst-env guix pack -K -C xz	\
-	  -s "$*" --localstatedir guix glibc-utf8-locales		\
+	  -s "$*" --localstatedir --profile-name=current-guix guix` ;	\
-	  -e  '(@@ (gnu packages commencement) glibc-final)'` ;		\
 	cp "$$tarball" "$@.tmp" ; mv "$@.tmp" "$@"
 
 

NEWS

@@ -15,11 +15,57 @@ Please send Guix bug reports to bug-guix@gnu.org.
 
 ** Package management
 
+*** ‘guix pull -l’ lists new and upgraded packages
+*** ‘guix pull’ now supports channels via ~/.config/guix/channels.scm
+*** New ‘--profile’ or ‘-p’ option for ‘guix pull’
+*** New ‘guix describe’ command
+*** ‘guix package’ no longer shows build logs by default
+*** ‘guix’ commands now produce colored output by default
+*** Manifests can now refer to arbitrary Guix commits using “inferiors”
+*** New ‘guix processes’ command
+*** ‘guix pack’ now honors ‘--localstatedir’ for all its backends
 *** ‘guix import pypi’ has a new ‘--recursive’ option
 *** ‘guix import hackage’ has a new ‘--recursive’ option
 *** ‘guix import stackage’ has a new ‘--recursive’ option
 The short option for ‘--lts-version’ is now ‘-l’ (used to be ‘-r’).
+*** ‘guix refresh’ now stores upstream keys in ~/.config/guix/upstream
+*** Guix now depends on Guile-Gcrypt
 
+** Distribution
+
+*** The GNU Shepherd was upgraded to 0.5.0
+*** ‘guix system reconfigure’ now loads Shepherd service replacements
+*** ‘herd schedule mcron’ now displays mcron’s job schedule
+*** ‘herd statistics nscd’ now displays nscd statistics
+*** ‘herd invalidate nscd TABLE’ instructs nscd to invalidate TABLE
+*** New services
+
+gitolite, iptables, pcscd, prometheus-node-exporter, varnish
+
+** Programming interfaces
+
+*** New (guix channels) module
+*** New (guix inferior) module
+*** New (guix status) module
+*** ‘packages->manifest’ now accepts inferior packages
+*** New build systems: ‘clojure’, ‘guile’
+*** Shepherd services can now declare custom actions
+*** More of the (gnu system …) APIs are now non-monadic
+*** New ‘add-file-tree-to-store’ procedure in (guix store)
+
+** Noteworthy bug fixes
+
+** Native language support
+
+*** The manual is now partially translated into German, in addition to French
+
+To read the German manual, just type “info guix.de” or read it on-line at
+<https://gnu.org/s/guix/manual/de/html_node>.  Consider translating the manual
+to your native language by joining the Translation Project:
+<https://translationproject.org/domain/guix-manual.html>.
+
+*** Updated translations:
+*** New translations:
 
 * Changes in 0.15.0 (since 0.14.0)
 

README

@@ -24,7 +24,7 @@ GNU Guix currently depends on the following packages:
   - [[https://notabug.org/cwebber/guile-gcrypt][Guile-Gcrypt]] 0.1.0 or later
   - [[https://www.gnu.org/software/make/][GNU Make]]
   - [[https://www.gnutls.org][GnuTLS]] compiled with guile support enabled
-  - [[https://notabug.org/civodul/guile-sqlite3][Guile-SQLite3]], version 0.1.0 or later
+  - [[https://notabug.org/guile-sqlite3/guile-sqlite3][Guile-SQLite3]], version 0.1.0 or later
   - [[https://gitlab.com/guile-git/guile-git][Guile-Git]]
   - [[http://www.zlib.net/][zlib]]
   - optionally [[https://savannah.nongnu.org/projects/guile-json/][Guile-JSON]], for the 'guix import pypi' command

doc/guix.texi

@@ -499,18 +499,20 @@ archive content is independent of its creation time, thus making it
 reproducible.
 
 @item
-Make @code{root}'s profile available under @file{~root/.guix-profile}:
+Make the profile available under @file{~root/.config/guix/current}, which is
+where @command{guix pull} will install updates (@pxref{Invoking guix pull}):
 
 @example
-# ln -sf /var/guix/profiles/per-user/root/guix-profile \
+# mkdir -p ~root/.config/guix
-         ~root/.guix-profile
+# ln -sf /var/guix/profiles/per-user/root/current-guix \
+         ~root/.config/guix/current
 @end example
 
 Source @file{etc/profile} to augment @code{PATH} and other relevant
 environment variables:
 
 @example
-# GUIX_PROFILE="`echo ~root`/.guix-profile" ; \
+# GUIX_PROFILE="`echo ~root`/.config/guix/current" ; \
   source $GUIX_PROFILE/etc/profile
 @end example
 
@@ -532,7 +534,7 @@ with these commands:
 @c http://lists.gnu.org/archive/html/guix-devel/2017-01/msg01199.html
 
 @example
-# cp ~root/.guix-profile/lib/systemd/system/guix-daemon.service \
+# cp ~root/.config/guix/current/lib/systemd/system/guix-daemon.service \
      /etc/systemd/system/
 # systemctl start guix-daemon && systemctl enable guix-daemon
 @end example
@@ -541,14 +543,16 @@ If your host distro uses the Upstart init system:
 
 @example
 # initctl reload-configuration
-# cp ~root/.guix-profile/lib/upstart/system/guix-daemon.conf /etc/init/
+# cp ~root/.config/guix/current/lib/upstart/system/guix-daemon.conf \
+     /etc/init/
 # start guix-daemon
 @end example
 
 Otherwise, you can still start the daemon manually with:
 
 @example
-# ~root/.guix-profile/bin/guix-daemon --build-users-group=guixbuild
+# ~root/.config/guix/current/bin/guix-daemon \
+       --build-users-group=guixbuild
 @end example
 
 @item
@@ -558,7 +562,7 @@ for instance with:
 @example
 # mkdir -p /usr/local/bin
 # cd /usr/local/bin
-# ln -s /var/guix/profiles/per-user/root/guix-profile/bin/guix
+# ln -s /var/guix/profiles/per-user/root/current-guix/bin/guix
 @end example
 
 It is also a good idea to make the Info version of this manual available
@@ -567,7 +571,7 @@ there:
 @example
 # mkdir -p /usr/local/share/info
 # cd /usr/local/share/info
-# for i in /var/guix/profiles/per-user/root/guix-profile/share/info/* ;
+# for i in /var/guix/profiles/per-user/root/current-guix/share/info/* ;
   do ln -s $i ; done
 @end example
 
@@ -582,7 +586,8 @@ To use substitutes from @code{hydra.gnu.org} or one of its mirrors
 (@pxref{Substitutes}), authorize them:
 
 @example
-# guix archive --authorize < ~root/.guix-profile/share/guix/hydra.gnu.org.pub
+# guix archive --authorize < \
+     ~root/.config/guix/current/share/guix/hydra.gnu.org.pub
 @end example
 
 @item
@@ -616,7 +621,8 @@ make guix-binary.@var{system}.tar.xz
 ... which, in turn, runs:
 
 @example
-guix pack -s @var{system} --localstatedir guix
+guix pack -s @var{system} --localstatedir \
+  --profile-name=current-guix guix
 @end example
 
 @xref{Invoking guix pack}, for more info on this handy tool.
@@ -641,7 +647,7 @@ later, including 2.2.x;
 (@pxref{Guile Preparations, how to install the GnuTLS bindings for
 Guile,, gnutls-guile, GnuTLS-Guile});
 @item
-@uref{https://notabug.org/civodul/guile-sqlite3, Guile-SQLite3}, version 0.1.0
+@uref{https://notabug.org/guile-sqlite3/guile-sqlite3, Guile-SQLite3}, version 0.1.0
 or later;
 @item
 @c FIXME: Specify a version number once a release has been made.
@@ -3273,7 +3279,12 @@ produce human-readable output;
 @item channels
 produce a list of channel specifications that can be passed to @command{guix
 pull -C} or installed as @file{~/.config/guix/channels.scm} (@pxref{Invoking
-guix pull}).
+guix pull});
+@item json
+@cindex JSON
+produce a list of channel specifications in JSON format;
+@item recutils
+produce a list of channel specifications in Recutils format.
 @end table
 
 @item --profile=@var{profile}
@@ -3483,8 +3494,11 @@ For instance, @code{-S /opt/gnu/bin=bin} creates a @file{/opt/gnu/bin}
 symlink pointing to the @file{bin} sub-directory of the profile.
 
 @item --localstatedir
-Include the ``local state directory'', @file{/var/guix}, in the
+@itemx --profile-name=@var{name}
-resulting pack.
+Include the ``local state directory'', @file{/var/guix}, in the resulting
+pack, and notably the @file{/var/guix/profiles/per-user/root/@var{name}}
+profile---by default @var{name} is @code{guix-profile}, which corresponds to
+@file{~root/.guix-profile}.
 
 @file{/var/guix} contains the store database (@pxref{The Store}) as well
 as garbage-collector roots (@pxref{Invoking guix gc}).  Providing it in

etc/guix-daemon.conf.in

@@ -7,4 +7,4 @@ start on runlevel [2345]
 
 stop on runlevel [016]
 
-exec @localstatedir@/guix/profiles/per-user/root/guix-profile/bin/guix-daemon --build-users-group=guixbuild
+exec @localstatedir@/guix/profiles/per-user/root/current-guix/bin/guix-daemon --build-users-group=guixbuild

etc/guix-daemon.service.in

@@ -6,8 +6,8 @@
 Description=Build daemon for GNU Guix
 
 [Service]
-ExecStart=@localstatedir@/guix/profiles/per-user/root/guix-profile/bin/guix-daemon --build-users-group=guixbuild
+ExecStart=@localstatedir@/guix/profiles/per-user/root/current-guix/bin/guix-daemon --build-users-group=guixbuild
-Environment=GUIX_LOCPATH=/root/.guix-profile/lib/locale
+Environment=GUIX_LOCPATH=@localstatedir@/guix/profiles/per-user/root/guix-profile/lib/locale
 RemainAfterExit=yes
 StandardOutput=syslog
 StandardError=syslog

etc/guix-install.sh

@@ -269,12 +269,13 @@ sys_create_store()
     fi
 
     _msg "${INF}Linking the root user's profile"
-    ln -sf /var/guix/profiles/per-user/root/guix-profile \
+    mkdir -p "${ROOT_HOME}/.config/guix"
-       "${ROOT_HOME}/.guix-profile"
+    ln -sf /var/guix/profiles/per-user/root/current-guix \
+       "${ROOT_HOME}/.config/guix/current"
 
-    GUIX_PROFILE="${ROOT_HOME}/.guix-profile"
+    GUIX_PROFILE="${ROOT_HOME}/.config/guix/current"
     source "${GUIX_PROFILE}/etc/profile"
-    _msg "${PAS}activated root profile at /root/.guix-profile"
+    _msg "${PAS}activated root profile at ${ROOT_HOME}/.config/guix/current"
 }
 
 sys_create_build_user()
@@ -317,18 +318,18 @@ sys_enable_guix_daemon()
 
     info_path="/usr/local/share/info"
     local_bin="/usr/local/bin"
-    var_guix="/var/guix/profiles/per-user/root/guix-profile"
+    var_guix="/var/guix/profiles/per-user/root/current-guix"
 
     case "$INIT_SYS" in
         upstart)
             { initctl reload-configuration;
-              cp "${ROOT_HOME}/.guix-profile/lib/upstart/system/guix-daemon.conf" \
+              cp "${ROOT_HOME}/.config/guix/current/lib/upstart/system/guix-daemon.conf" \
                  /etc/init/ &&
                   start guix-daemon; } &&
                 _msg "${PAS}enabled Guix daemon via upstart"
             ;;
         systemd)
-            { cp "${ROOT_HOME}/.guix-profile/lib/systemd/system/guix-daemon.service" \
+            { cp "${ROOT_HOME}/.config/guix/current/lib/systemd/system/guix-daemon.service" \
                  /etc/systemd/system/;
               chmod 664 /etc/systemd/system/guix-daemon.service;
               systemctl daemon-reload &&
@@ -338,7 +339,7 @@ sys_enable_guix_daemon()
             ;;
         NA|*)
             _msg "${ERR}unsupported init system; run the daemon manually:"
-            echo "  ${ROOT_HOME}/.guix-profile/bin/guix-daemon --build-users-group=guixbuild"
+            echo "  ${ROOT_HOME}/.config/guix/current/bin/guix-daemon --build-users-group=guixbuild"
             ;;
     esac
 
@@ -358,9 +359,9 @@ sys_authorize_build_farms()
     while true; do
         read -p "Permit downloading pre-built package binaries from the project's build farms? (yes/no) " yn
         case $yn in
-            [Yy]*) guix archive --authorize < "${ROOT_HOME}/.guix-profile/share/guix/hydra.gnu.org.pub" &&
+            [Yy]*) guix archive --authorize < "${ROOT_HOME}/.config/guix/current/share/guix/hydra.gnu.org.pub" &&
                          _msg "${PAS}Authorized public key for hydra.gnu.org";
-                   guix archive --authorize < "${ROOT_HOME}/.guix-profile/share/guix/berlin.guixsd.org.pub" &&
+                   guix archive --authorize < "${ROOT_HOME}/.config/guix/current/share/guix/berlin.guixsd.org.pub" &&
                        _msg "${PAS}Authorized public key for berlin.guixsd.org";
                    break;;
             [Nn]*) _msg "${INF}Skipped authorizing build farm public keys"

etc/guix-publish.conf.in

@@ -9,4 +9,4 @@ stop on runlevel [016]
 
 task
 
-exec @localstatedir@/guix/profiles/per-user/root/guix-profile/bin/guix publish --user=nobody --port=8181
+exec @localstatedir@/guix/profiles/per-user/root/current-guix/bin/guix publish --user=nobody --port=8181

etc/guix-publish.service.in

@@ -6,8 +6,8 @@
 Description=Publish the GNU Guix store
 
 [Service]
-ExecStart=@localstatedir@/guix/profiles/per-user/root/guix-profile/bin/guix publish --user=nobody --port=8181
+ExecStart=@localstatedir@/guix/profiles/per-user/root/current-guix/bin/guix publish --user=nobody --port=8181
-Environment=GUIX_LOCPATH=/root/.guix-profile/lib/locale
+Environment=GUIX_LOCPATH=@localstatedir@/guix/profiles/per-user/root/guix-profile/lib/locale
 RemainAfterExit=yes
 StandardOutput=syslog
 StandardError=syslog

gnu/bootloader/u-boot.scm

@@ -32,6 +32,7 @@
             u-boot-nintendo-nes-classic-edition-bootloader
             u-boot-novena-bootloader
             u-boot-pine64-plus-bootloader
+            u-boot-pinebook-bootloader
             u-boot-puma-rk3399-bootloader
             u-boot-wandboard-bootloader))
 
@@ -168,6 +169,11 @@
    (inherit u-boot-allwinner64-bootloader)
    (package u-boot-pine64-plus)))
 
+(define u-boot-pinebook-bootloader
+  (bootloader
+   (inherit u-boot-allwinner64-bootloader)
+   (package u-boot-pinebook)))
+
 (define u-boot-puma-rk3399-bootloader
   (bootloader
    (inherit u-boot-bootloader)

gnu/local.mk

@@ -1191,6 +1191,12 @@ dist_patch_DATA =						\
   %D%/packages/patches/totem-meson-easy-codec.patch		\
   %D%/packages/patches/tuxpaint-stamps-path.patch		\
   %D%/packages/patches/twinkle-include-qregexpvalidator.patch	\
+  %D%/packages/patches/u-boot-pinebook-a64-update-dts.patch	\
+  %D%/packages/patches/u-boot-pinebook-mmc-calibration.patch	\
+  %D%/packages/patches/u-boot-pinebook-r_i2c-controller.patch	\
+  %D%/packages/patches/u-boot-pinebook-dts.patch		\
+  %D%/packages/patches/u-boot-pinebook-syscon-node.patch	\
+  %D%/packages/patches/u-boot-pinebook-video-bridge.patch	\
   %D%/packages/patches/unrtf-CVE-2016-10091.patch		\
   %D%/packages/patches/unzip-CVE-2014-8139.patch		\
   %D%/packages/patches/unzip-CVE-2014-8140.patch		\

gnu/packages/algebra.scm

@@ -243,7 +243,7 @@ precision.")
 (define-public giac-xcas
   (package
     (name "giac-xcas")
-    (version "1.4.9-59")
+    (version "1.5.0-19")
     (source (origin
               (method url-fetch)
               ;; "~parisse/giac" is not used because the maintainer regularly
@@ -255,16 +255,48 @@ precision.")
                                   "source/giac_" version ".tar.gz"))
               (sha256
                (base32
-                "0dv5p5y6gkrsmz3xa7fw87rjyabwdwk09mqb09kb7gai9n9dgayk"))))
+                "0ds1zh712sr20qh0fih8jnm4nlv90andllp8n263qs7rlhblz551"))))
     (build-system gnu-build-system)
+    (outputs '("out" "doc"))            ;77MiB of documentation
     (arguments
-     `(#:phases
+     `(#:modules ((ice-9 ftw)
+                  (guix build utils)
+                  (guix build gnu-build-system))
+       #:phases
        (modify-phases %standard-phases
          (add-after 'unpack 'patch-bin-cp
-           (lambda _
            ;; Some Makefiles contain hard-coded "/bin/cp".
+           (lambda _
              (substitute* (find-files "doc" "^Makefile")
                (("/bin/cp") (which "cp")))
+             #t))
+         (add-after 'unpack 'disable-failing-test
+           ;; FIXME: Test failing.  Not sure why.
+           (lambda _
+             (substitute* "check/Makefile.in"
+               (("chk_fhan11") ""))
+             #t))
+         (add-after 'install 'install-doc
+           ;; Setting --docdir to "doc" output isn't sufficient as
+           ;; documentation and examples are scattered throughout the source.
+           (lambda* (#:key outputs #:allow-other-keys)
+             (let* ((out (assoc-ref outputs "out"))
+                    (doc (assoc-ref outputs "doc"))
+                    (docdir (string-append doc
+                                           "/share/doc/"
+                                           (string-append ,name "-" ,version))))
+               ;; For some reason, the install process moves
+               ;; "share/giac/examples" instead of "share/giac/doc" to
+               ;; "$(docdir)".  Clean up the mess and start over.
+               (delete-file-recursively (string-append doc "/share"))
+               (mkdir-p docdir)
+               (with-directory-excursion out
+                 (for-each (lambda (f)
+                             (unless (member f '("." ".."))
+                               (copy-recursively (string-append "share/giac/" f)
+                                                 (string-append docdir "/" f))))
+                           (scandir "share/giac"))
+                 (delete-file-recursively "share/giac")))
              #t)))))
     (inputs
      `(("fltk" ,fltk)

gnu/packages/audio.scm

@@ -2180,7 +2180,7 @@ background file post-processing.")
 (define-public supercollider
   (package
     (name "supercollider")
-    (version "3.9.2")
+    (version "3.9.3")
     (source (origin
               (method url-fetch)
               (uri (string-append
@@ -2189,7 +2189,7 @@ background file post-processing.")
                     "/SuperCollider-" version "-Source-linux.tar.bz2"))
               (sha256
                (base32
-                "0d3cb6dw8jz7ijriqn3rlwin24gffczp69hl17pzxj1d5w57yj44"))))
+                "1d8ixfl100jvlialxdizp8wqsl1mp5pi2bam25vp97bhjd59cfdr"))))
     (build-system cmake-build-system)
     (arguments
      `(#:configure-flags '("-DSYSTEM_BOOST=on" "-DSYSTEM_YAMLCPP=on"

gnu/packages/bittorrent.scm

@@ -8,6 +8,7 @@
 ;;; Copyright © 2016, 2017, 2018 Tobias Geerinckx-Rice <me@tobias.gr>
 ;;; Copyright © 2017 Jelle Licht <jlicht@fsfe.org>
 ;;; Copyright © 2018 Fis Trivial <ybbs.daans@hotmail.com>
+;;; Copyright © 2018 Nam Nguyen <namn@berkeley.edu>
 ;;;
 ;;; This file is part of GNU Guix.
 ;;;
@@ -42,6 +43,7 @@
   #:use-module (gnu packages cyrus-sasl)
   #:use-module (gnu packages databases)
   #:use-module (gnu packages file)
+  #:use-module (gnu packages freedesktop)
   #:use-module (gnu packages glib)
   #:use-module (gnu packages gnome)
   #:use-module (gnu packages gnupg)
@@ -54,6 +56,7 @@
   #:use-module (gnu packages ncurses)
   #:use-module (gnu packages pkg-config)
   #:use-module (gnu packages python)
+  #:use-module (gnu packages python-crypto)
   #:use-module (gnu packages qt)
   #:use-module (gnu packages ssh)
   #:use-module (gnu packages tls)
@@ -371,17 +374,17 @@ and will take advantage of multiple processor cores where possible.")
 (define-public libtorrent-rasterbar
   (package
     (name "libtorrent-rasterbar")
-    (version "1.1.8")
+    (version "1.1.11")
     (source (origin
               (method url-fetch)
               (uri
                (string-append
-                "https://github.com/arvidn/libtorrent/releases/download/libtorrent-"
+                "https://github.com/arvidn/libtorrent/releases/download/libtorrent_"
                 (string-join (string-split version #\.) "_")
                 "/libtorrent-rasterbar-" version ".tar.gz"))
               (sha256
                (base32
-                "0pcdy26l5ivcs78y2bqh2qca83ikzjfchw5815xh69qf8g88zgvb"))))
+                "0isqidr11fnhybr0wvk0qxd97jaikmh8fx9h89b84yd2gyxdw8vw"))))
     (build-system gnu-build-system)
     (arguments
      `(#:configure-flags
@@ -393,7 +396,18 @@ and will take advantage of multiple processor cores where possible.")
              "CXXFLAGS=-std=c++11")     ; Use std::chrono instead of boost
        #:make-flags (list
                      (string-append "LDFLAGS=-Wl,-rpath="
-                                    (assoc-ref %outputs "out") "/lib"))))
+                                    (assoc-ref %outputs "out") "/lib"))
+       #:phases (modify-phases %standard-phases
+           (add-after 'unpack 'compile-python-c++11
+             (lambda _
+               ;; Make sure the Python bindings are compiled in C++ mode to
+               ;; avoid undefined references as mentioned in
+               ;; <https://github.com/qbittorrent/qBittorrent/issues/638>.
+               ;; XXX: This can be removed for 1.2+.
+               (substitute* "bindings/python/setup.py"
+                 (("\\+ target_specific\\(\\)\\,")
+                  "+ target_specific() + ['-std=c++11'],"))
+               #t)))))
     (inputs `(("boost" ,boost)
               ("openssl" ,openssl)))
     (native-inputs `(("python" ,python-2)
@@ -448,3 +462,40 @@ It aims to be a good alternative to all other BitTorrent clients out there.
 qBittorrent is fast, stable and provides unicode support as well as many
 features.")
     (license l:gpl2+)))
+
+(define-public deluge
+  (package
+    (name "deluge")
+    (version "1.3.15")
+    (source
+     (origin
+       (method url-fetch)
+       (uri (string-append
+             "http://download.deluge-torrent.org/source/deluge-"
+             version ".tar.xz"))
+       (sha256
+        (base32
+         "0b7rri4x0wrcj7rjghrnw1kfrsd5i7i6aq85dsg5dg1w1qa0ar59"))))
+    (build-system python-build-system)
+    (inputs
+     `(("libtorrent" ,libtorrent-rasterbar)
+       ("python2-chardet" ,python2-chardet)
+       ("python2-pygtk" ,python2-pygtk)
+       ("python2-pyopenssl" ,python2-pyopenssl)
+       ("python2-pyxdg" ,python2-pyxdg)
+       ("python2-service-identity" ,python2-service-identity)
+       ("python2-twisted" ,python2-twisted)))
+    (native-inputs
+     `(("intltool" ,intltool)))
+    (arguments
+     `(#:python ,python-2))
+    (home-page "https://www.deluge-torrent.org/")
+    (synopsis  "Fully-featured cross-platform ​BitTorrent client")
+    (description
+     "Deluge contains the common features to BitTorrent clients such as
+Protocol Encryption, DHT, Local Peer Discovery (LSD), Peer Exchange
+(PEX), UPnP, NAT-PMP, Proxy support, Web seeds, global and per-torrent
+speed limits.  Deluge heavily utilises the ​libtorrent library.  It is
+designed to run as both a normal standalone desktop application and as a
+​client-server.")
+    (license l:gpl3+)))

gnu/packages/bootloaders.scm

@@ -580,6 +580,22 @@ board-independent tools.")))
 (define-public u-boot-pine64-plus
   (make-u-boot-sunxi64-package "pine64_plus" "aarch64-linux-gnu"))
 
+(define-public u-boot-pinebook
+  (let ((base (make-u-boot-sunxi64-package "pinebook" "aarch64-linux-gnu")))
+    (package
+      (inherit base)
+      (source (origin
+              (inherit (package-source u-boot))
+              (patches (search-patches
+                        ;; Add patches to enable Pinebook support from sunxi
+                        ;; maintainer tree: git://git.denx.de/u-boot-sunxi.git
+                        "u-boot-pinebook-a64-update-dts.patch"
+                        "u-boot-pinebook-syscon-node.patch"
+                        "u-boot-pinebook-mmc-calibration.patch"
+                        "u-boot-pinebook-video-bridge.patch"
+                        "u-boot-pinebook-r_i2c-controller.patch"
+                        "u-boot-pinebook-dts.patch")))))))
+
 (define-public u-boot-bananapi-m2-ultra
   (make-u-boot-package "Bananapi_M2_Ultra" "arm-linux-gnueabihf"))
 

gnu/packages/emacs.scm

@@ -811,6 +811,29 @@ different tools.  It highlights errors and warnings inline in the buffer, and
 provides an optional IDE-like error list.")
     (license license:gpl3+)))                     ;+GFDLv1.3+ for the manual
 
+(define-public emacs-a
+  (package
+    (name "emacs-a")
+    (version "0.1.1")
+    (source (origin
+              (method git-fetch)
+              (uri (git-reference
+                    (url "https://github.com/plexus/a.el.git")
+                    (commit (string-append "v" version))))
+              (file-name (git-file-name name version))
+              (sha256
+               (base32
+                "00v9w6qg3bkwdhypq0ssf0phdh0f4bcq59c20lngd6vhk0204dqi"))))
+    (build-system emacs-build-system)
+    (home-page "https://github.com/plexus/a.el/")
+    (synopsis
+     "Emacs library for dealing with association lists and hash tables")
+    (description "@code{emacs-a} provides Emacs Lisp functions for dealing
+with associative structures in a uniform and functional way.  These functions
+can take association lists, hash tables, and in some cases vectors (where the
+index is considered the key).")
+    (license license:gpl3+)))
+
 
 ;;;
 ;;; Web browsing.
@@ -7744,6 +7767,22 @@ activity in channels in the status bar so it stays out of your way unless you
 want to use it.")
     (license license:gpl3+)))
 
+(define-public emacs-tracking
+  (package
+    (inherit emacs-circe)
+    (name "emacs-tracking")
+    (arguments
+     ;; "tracking.el" is a library extracted from Circe package.  It requires
+     ;; "shorten.el".
+     `(#:include '("^shorten.el$" "^tracking.el$")
+       #:tests? #f))                    ;tests require buttercup
+    (home-page "https://github.com/jorgenschaefer/circe/wiki/Tracking")
+    (synopsis "Buffer tracking library")
+    (description "@code{tracking.el} provides a way for different modes to
+notify the user that a buffer needs attention.  The user then can cycle
+through them using @key{C-c C-SPC}.")
+    (license license:gpl3+)))
+
 (define-public emacs-slack
   (let ((commit "d90395482d26175ce38fd935e978c428be8af9a0")
         (revision "4"))
@@ -11737,8 +11776,8 @@ file.")
       (license license:gpl3+))))
 
 (define-public emacs-picpocket
-  (let ((version "20180610.1059") ; taken from melpa
+  (let ((version "40")
-        (commit "ce4b6ed088384f2414af82e8e4eae5b92c2874bf"))
+        (commit "6fd88b8711c4370662c0f9c462170187d092a046"))
     (package
       (name "emacs-picpocket")
       (version version)
@@ -11750,7 +11789,7 @@ file.")
                (commit commit)))
          (file-name (git-file-name name version))
          (sha256
-          (base32 "15vpbcv83mc4j1pvrk7xic0klh2bl9gzg2xxs7c2lmnix52hy8mv"))))
+          (base32 "1mdzzxf7xm7zwrpnqqxa27d1cr31pd72d7ilbwljv13qp177a3yw"))))
       (build-system emacs-build-system)
       (arguments ; needed for running tests
        `(#:tests? #t
@@ -12570,3 +12609,55 @@ customized.  In addition to C code development @command{gtk-look} is good for
 classes like @command{<gtk-window>}.
 @end itemize\n")
     (license license:gpl3+)))
+
+(define-public emacs-ov
+  (package
+    (name "emacs-ov")
+    (version "1.0.6")
+    (source (origin
+              (method git-fetch)
+              (uri (git-reference
+                    (url "https://github.com/ShingoFukuyama/ov.el.git")
+                    (commit version)))
+              (file-name (git-file-name name version))
+              (sha256
+               (base32
+                "0qxk2rf84j86syxi8xknsq252irwg7sz396v3bb4wqz4prpj0kzc"))))
+    (build-system emacs-build-system)
+    (home-page "https://github.com/ShingoFukuyama/ov.el")
+    (synopsis "Overlay library for Emacs Lisp")
+    (description "@code{ov.el} provides a simple way to manipulate overlays in
+Emacs.")
+    (license license:gpl3+)))
+
+(define-public emacs-matrix-client
+  (let ((commit "3eab4c28280feff18ee1ddd7db66ada4f135cbf8"))
+    (package
+      (name "emacs-matrix-client")
+      (version (git-version "0.0.0" "1" commit))
+      (source (origin
+                (method git-fetch)
+                (uri (git-reference
+                      (url "https://github.com/jgkamat/matrix-client-el.git")
+                      (commit commit)))
+                (file-name (git-file-name name version))
+                (sha256
+                 (base32
+                  "1k6721jz0m22vpb78881k087mpx8hf3s2219ic75v5mhgx355f7m"))))
+      (build-system emacs-build-system)
+      (propagated-inputs
+       `(("a" ,emacs-a)
+         ("dash" ,emacs-dash)
+         ("esxml" ,emacs-esxml)
+         ("f" ,emacs-f)
+         ("ht" ,emacs-ht)
+         ("ov" ,emacs-ov)
+         ("request" ,emacs-request)
+         ("s" ,emacs-s)
+         ("tracking" ,emacs-tracking)))
+      (home-page "https://github.com/jgkamat/matrix-client-el")
+      (synopsis "Matrix client for Emacs")
+      (description "@code{matrix-client} is a simple chat UI to Matrix.org
+rooms.  It also provides an API which allows Emacs to seamlessly create
+RPC channels with users and other software.")
+      (license license:gpl3+))))

gnu/packages/lisp.scm

@@ -533,8 +533,13 @@ statistical profiler, a code coverage tool, and many other extensions.")
                (install-file kernel libdir)
                (install-file heap libdir)
 
-               (let ((dirs '("lib" "library" "examples" "contrib"
+               (let ((dirs '("lib" "library" "examples" "tools" "objc-bridge"
-                             "tools" "objc-bridge")))
+                             ,@(match (%current-system)
+                                ("x86_64-linux"
+                                 '("x86-headers64"))
+                                ("i686-linux"
+                                 '("x86-headers"))
+                                (_ '())))))
                  (for-each copy-recursively
                            dirs
                            (map (cut string-append libdir <>) dirs)))
@@ -545,13 +550,12 @@ statistical profiler, a code coverage tool, and many other extensions.")
                    (display
                     (string-append
                      "#!" bash "/bin/sh\n"
-                     "CCL_DEFAULT_DIRECTORY=" libdir "\n"
+                     "export CCL_DEFAULT_DIRECTORY=" libdir "\n"
-                     "export CCL_DEFAULT_DIRECTORY\n"
+                     "exec -a \"$0\" " libdir kernel " \"$@\"\n"))))
-                     "exec " libdir kernel "\n"))))
                (chmod wrapper #o755))
              #t)))))
     (supported-systems '("i686-linux" "x86_64-linux" "armhf-linux"))
-    (home-page "http://ccl.clozure.com/")
+    (home-page "https://ccl.clozure.com/")
     (synopsis "Common Lisp implementation")
     (description "Clozure CL (often called CCL for short) is a Common Lisp
 implementation featuring fast compilation speed, native threads, a precise,

gnu/packages/maths.scm

@@ -1655,7 +1655,7 @@ September 2004}")
 (define-public petsc
   (package
     (name "petsc")
-    (version "3.9.3")
+    (version "3.10.2")
     (source
      (origin
       (method url-fetch)
@@ -1663,7 +1663,7 @@ September 2004}")
       (uri (string-append "http://ftp.mcs.anl.gov/pub/petsc/release-snapshots/"
                           "petsc-lite-" version ".tar.gz"))
       (sha256
-       (base32 "1fwkbwv4g7zf2lc8fw865xd0bl9anb6jaczfis5dff7h449gwa48"))))
+       (base32 "0bl64pydak3rblnjffi482r8bin4xim9sb37ksl2jkcxf0i0irsi"))))
     (outputs '("out"                    ;libraries and headers
                "examples"))             ;~30MiB of examples
     (build-system gnu-build-system)
@@ -1812,14 +1812,14 @@ scientific applications modeled by partial differential equations.")
 (define-public python-petsc4py
   (package
     (name "python-petsc4py")
-    (version "3.9.1")
+    (version "3.10.0")
     (source
       (origin
         (method url-fetch)
         (uri (pypi-uri "petsc4py" version))
         (sha256
           (base32
-            "1f8zd1ac9irsgkyqmzq30d9kl10fy1nh6zk312dhs43g449fkkhc"))))
+            "0ch3g6dsvxl7qi984fcssv7cxfbif4bw04gkvxl2l1b8wrmvrm25"))))
     (build-system python-build-system)
     (arguments
      `(#:phases
@@ -1871,7 +1871,7 @@ savings are consistently > 5x.")
 (define-public slepc
   (package
     (name "slepc")
-    (version "3.9.2")
+    (version "3.10.1")
     (source
      (origin
        (method url-fetch)
@@ -1879,7 +1879,7 @@ savings are consistently > 5x.")
                            version ".tar.gz"))
        (sha256
         (base32
-         "0gmhdqac8zm3jx43h935z7bflazjnpvqxjv4jh5za2y1z2rqax94"))))
+         "188j1a133q91h8pivpnzwcf78kz8dvz2nzf6ndnjygdbqb48fizn"))))
     (build-system gnu-build-system)
     (native-inputs
      `(("python" ,python-2)))
@@ -1978,14 +1978,14 @@ arising after the discretization of partial differential equations.")
 (define-public python-slepc4py
   (package
     (name "python-slepc4py")
-    (version "3.9.0")
+    (version "3.10.0")
     (source
       (origin
         (method url-fetch)
         (uri (pypi-uri "slepc4py" version))
         (sha256
           (base32
-            "02xr0vndgibgkz3rgprqk05n3mk5mpgqw550sr4681vcsgz4zvb7"))))
+            "0x049dyc8frgh79fvvavf4vlbqp4mgm61nsaivzdav4316vvlv1j"))))
     (build-system python-build-system)
     (arguments
      `(#:phases

gnu/packages/messaging.scm

@@ -588,7 +588,7 @@ was initially a fork of xmpppy, but uses non-blocking sockets.")
      `(#:test-target "test_nogui"
        #:phases
        (modify-phases %standard-phases
-         (add-after 'install 'wrap-program
+         (add-after 'install 'wrap-gi-typelib-path
            (lambda* (#:key outputs #:allow-other-keys)
              (let ((out (assoc-ref outputs "out")))
                (for-each
@@ -616,7 +616,7 @@ was initially a fork of xmpppy, but uses non-blocking sockets.")
                  (symlink adwaita "Adwaita")
                  (copy-recursively hicolor "hicolor")))
              #t))
-         (add-after 'install-icons 'wrap-program
+         (add-after 'install-icons 'wrap-gsettings-schema-dir
            (lambda* (#:key inputs outputs #:allow-other-keys)
              (wrap-program (string-append (assoc-ref outputs "out")
                                           "/bin/gajim")

gnu/packages/patches/u-boot-pinebook-dts.patch

@@ -0,0 +1,388 @@
+From b972831c3cd24f3c9bb0995ed61db8f8239f3391 Mon Sep 17 00:00:00 2001
+From: Vasily Khoruzhick <anarsoul@gmail.com>
+Date: Mon, 5 Nov 2018 20:24:31 -0800
+Subject: [PATCH 10/13] sunxi: DT: add support for Pinebook
+
+Pinebook is a laptop produced by Pine64, with USB-connected keyboard,
+USB-connected touchpad and an eDP LCD panel connected via a RGB-eDP
+bridge from Analogix.
+
+Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
+Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
+Tested-by: Maxime Ripard <maxime.ripard@bootlin.com>
+Cc: Vagrant Cascadian <vagrant@debian.org>
+Reviewed-by: Jagan Teki <jagan@openedev.com>
+---
+ arch/arm/dts/Makefile                        |   1 +
+ arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi |  15 ++
+ arch/arm/dts/sun50i-a64-pinebook.dts         | 294 +++++++++++++++++++++++++++
+ configs/pinebook_defconfig                   |  22 ++
+ 4 files changed, 332 insertions(+)
+ create mode 100644 arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
+ create mode 100644 arch/arm/dts/sun50i-a64-pinebook.dts
+ create mode 100644 configs/pinebook_defconfig
+
+diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
+index 3093c1185e..eae6b9ee5d 100644
+--- a/arch/arm/dts/Makefile
++++ b/arch/arm/dts/Makefile
+@@ -406,6 +406,7 @@ dtb-$(CONFIG_MACH_SUN50I) += \
+ 	sun50i-a64-orangepi-win.dtb \
+ 	sun50i-a64-pine64-plus.dtb \
+ 	sun50i-a64-pine64.dtb \
++	sun50i-a64-pinebook.dtb \
+ 	sun50i-a64-sopine-baseboard.dtb
+ dtb-$(CONFIG_MACH_SUN9I) += \
+ 	sun9i-a80-optimus.dtb \
+diff --git a/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi b/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
+new file mode 100644
+index 0000000000..a99b7171d0
+--- /dev/null
++++ b/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
+@@ -0,0 +1,15 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com>
++ *
++ */
++
++/* The ANX6345 eDP-bridge is on r_i2c */
++&r_i2c {
++	anx6345: edp-bridge@38 {
++		compatible = "analogix,anx6345";
++		reg = <0x38>;
++		reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
++		status = "okay";
++	};
++};
+diff --git a/arch/arm/dts/sun50i-a64-pinebook.dts b/arch/arm/dts/sun50i-a64-pinebook.dts
+new file mode 100644
+index 0000000000..ec537c5297
+--- /dev/null
++++ b/arch/arm/dts/sun50i-a64-pinebook.dts
+@@ -0,0 +1,294 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
++ * Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com>
++ *
++ */
++
++/dts-v1/;
++
++#include "sun50i-a64.dtsi"
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++#include <dt-bindings/pwm/pwm.h>
++
++/ {
++	model = "Pinebook";
++	compatible = "pine64,pinebook", "allwinner,sun50i-a64";
++
++	aliases {
++		serial0 = &uart0;
++		ethernet0 = &rtl8723cs;
++	};
++
++	vdd_bl: regulator@0 {
++		compatible = "regulator-fixed";
++		regulator-name = "bl-3v3";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
++		enable-active-high;
++	};
++
++	backlight: backlight {
++		compatible = "pwm-backlight";
++		pwms = <&pwm 0 50000 0>;
++		brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>;
++		default-brightness-level = <2>;
++		enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
++		power-supply = <&vdd_bl>;
++	};
++
++	chosen {
++		stdout-path = "serial0:115200n8";
++
++		framebuffer-lcd {
++			panel-supply = <&reg_dc1sw>;
++			dvdd25-supply = <&reg_dldo2>;
++			dvdd12-supply = <&reg_fldo1>;
++		};
++	};
++
++	gpio_keys {
++		compatible = "gpio-keys";
++
++		lid_switch {
++			label = "Lid Switch";
++			gpios = <&r_pio 0 12 GPIO_ACTIVE_LOW>; /* PL12 */
++			linux,input-type = <EV_SW>;
++			linux,code = <SW_LID>;
++			linux,can-disable;
++			wakeup-source;
++		};
++	};
++
++	reg_vcc3v3: vcc3v3 {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc3v3";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++	};
++
++	wifi_pwrseq: wifi_pwrseq {
++		compatible = "mmc-pwrseq-simple";
++		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
++	};
++};
++
++&ehci0 {
++	phys = <&usbphy 0>;
++	phy-names = "usb";
++	status = "okay";
++};
++
++&ehci1 {
++	status = "okay";
++};
++
++&mmc0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&mmc0_pins>;
++	vmmc-supply = <&reg_dcdc1>;
++	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
++	disable-wp;
++	bus-width = <4>;
++	status = "okay";
++};
++
++&mmc1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&mmc1_pins>;
++	vmmc-supply = <&reg_dldo4>;
++	vqmmc-supply = <&reg_eldo1>;
++	mmc-pwrseq = <&wifi_pwrseq>;
++	bus-width = <4>;
++	non-removable;
++	status = "okay";
++
++	rtl8723cs: wifi@1 {
++		reg = <1>;
++	};
++};
++
++&mmc2 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
++	vmmc-supply = <&reg_dcdc1>;
++	vqmmc-supply = <&reg_eldo1>;
++	bus-width = <8>;
++	non-removable;
++	cap-mmc-hw-reset;
++	mmc-hs200-1_8v;
++	status = "okay";
++};
++
++&ohci0 {
++	phys = <&usbphy 0>;
++	phy-names = "usb";
++	status = "okay";
++};
++
++&ohci1 {
++	status = "okay";
++};
++
++&pwm {
++	status = "okay";
++};
++
++&r_rsb {
++	status = "okay";
++
++	axp803: pmic@3a3 {
++		compatible = "x-powers,axp803";
++		reg = <0x3a3>;
++		interrupt-parent = <&r_intc>;
++		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
++	};
++};
++
++/* The ANX6345 eDP-bridge is on r_i2c */
++&r_i2c {
++	clock-frequency = <100000>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&r_i2c_pl89_pins>;
++	status = "okay";
++};
++
++#include "axp803.dtsi"
++
++&reg_aldo1 {
++	regulator-min-microvolt = <2800000>;
++	regulator-max-microvolt = <2800000>;
++	regulator-name = "vcc-csi";
++};
++
++&reg_aldo2 {
++	regulator-always-on;
++	regulator-min-microvolt = <1800000>;
++	regulator-max-microvolt = <3300000>;
++	regulator-name = "vcc-pl";
++};
++
++&reg_aldo3 {
++	regulator-always-on;
++	regulator-min-microvolt = <2700000>;
++	regulator-max-microvolt = <3300000>;
++	regulator-name = "vcc-pll-avcc";
++};
++
++&reg_dc1sw {
++	regulator-name = "vcc-lcd";
++};
++
++&reg_dcdc1 {
++	regulator-always-on;
++	regulator-min-microvolt = <3300000>;
++	regulator-max-microvolt = <3300000>;
++	regulator-name = "vcc-3v3";
++};
++
++&reg_dcdc2 {
++	regulator-always-on;
++	regulator-min-microvolt = <1000000>;
++	regulator-max-microvolt = <1300000>;
++	regulator-name = "vdd-cpux";
++};
++
++/* DCDC3 is polyphased with DCDC2 */
++
++&reg_dcdc5 {
++	regulator-always-on;
++	regulator-min-microvolt = <1200000>;
++	regulator-max-microvolt = <1200000>;
++	regulator-name = "vcc-dram";
++};
++
++&reg_dcdc6 {
++	regulator-always-on;
++	regulator-min-microvolt = <1100000>;
++	regulator-max-microvolt = <1100000>;
++	regulator-name = "vdd-sys";
++};
++
++&reg_dldo1 {
++	regulator-min-microvolt = <3300000>;
++	regulator-max-microvolt = <3300000>;
++	regulator-name = "vcc-hdmi";
++};
++
++&reg_dldo2 {
++	regulator-min-microvolt = <2500000>;
++	regulator-max-microvolt = <2500000>;
++	regulator-name = "vcc-edp";
++};
++
++&reg_dldo3 {
++	regulator-min-microvolt = <3300000>;
++	regulator-max-microvolt = <3300000>;
++	regulator-name = "avdd-csi";
++};
++
++&reg_dldo4 {
++	regulator-min-microvolt = <3300000>;
++	regulator-max-microvolt = <3300000>;
++	regulator-name = "vcc-wifi";
++};
++
++&reg_eldo1 {
++	regulator-always-on;
++	regulator-min-microvolt = <1800000>;
++	regulator-max-microvolt = <1800000>;
++	regulator-name = "cpvdd";
++};
++
++&reg_eldo3 {
++	regulator-min-microvolt = <1800000>;
++	regulator-max-microvolt = <1800000>;
++	regulator-name = "vdd-1v8-csi";
++};
++
++&reg_fldo1 {
++	regulator-min-microvolt = <1200000>;
++	regulator-max-microvolt = <1200000>;
++	regulator-name = "vcc-1v2-hsic";
++};
++
++&reg_fldo2 {
++	regulator-always-on;
++	regulator-min-microvolt = <1100000>;
++	regulator-max-microvolt = <1100000>;
++	regulator-name = "vdd-cpus";
++};
++
++&reg_ldo_io0 {
++	regulator-min-microvolt = <3300000>;
++	regulator-max-microvolt = <3300000>;
++	regulator-name = "vcc-usb";
++	status = "okay";
++};
++
++&reg_rtc_ldo {
++	regulator-name = "vcc-rtc";
++};
++
++&simplefb_hdmi {
++	vcc-hdmi-supply = <&reg_dldo1>;
++};
++
++&uart0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart0_pb_pins>;
++	status = "okay";
++};
++
++&usb_otg {
++	dr_mode = "host";
++};
++
++&usbphy {
++	usb0_vbus-supply = <&reg_ldo_io0>;
++	usb1_vbus-supply = <&reg_ldo_io0>;
++	status = "okay";
++};
+diff --git a/configs/pinebook_defconfig b/configs/pinebook_defconfig
+new file mode 100644
+index 0000000000..5294dbd2eb
+--- /dev/null
++++ b/configs/pinebook_defconfig
+@@ -0,0 +1,22 @@
++CONFIG_ARM=y
++CONFIG_ARCH_SUNXI=y
++CONFIG_SPL=y
++CONFIG_MACH_SUN50I=y
++CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y
++CONFIG_DRAM_CLK=552
++CONFIG_DRAM_ZQ=3881949
++CONFIG_MMC_SUNXI_SLOT_EXTRA=2
++CONFIG_R_I2C_ENABLE=y
++# CONFIG_CMD_FLASH is not set
++# CONFIG_SPL_DOS_PARTITION is not set
++# CONFIG_SPL_EFI_PARTITION is not set
++CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pinebook"
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_SUNXI=y
++CONFIG_USB_EHCI_HCD=y
++CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
++# CONFIG_USB_GADGET is not set
++CONFIG_VIDEO_BRIDGE=y
++CONFIG_VIDEO_BRIDGE_ANALOGIX_ANX6345=y
+-- 
+2.11.0
+

gnu/packages/patches/u-boot-pinebook-mmc-calibration.patch

@@ -0,0 +1,98 @@
+From 20940ef2a397446a209350900d3bd618c3fd5b94 Mon Sep 17 00:00:00 2001
+From: Vasily Khoruzhick <anarsoul@gmail.com>
+Date: Mon, 5 Nov 2018 20:24:28 -0800
+Subject: [PATCH 07/13] mmc: sunxi: add support for automatic delay calibration
+
+A64 and H6 support automatic delay calibration and Linux driver uses it
+instead of hardcoded delays. Add support for it to u-boot driver.
+
+Fixes eMMC instability on Pinebook
+
+Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
+Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
+Tested-by: Maxime Ripard <maxime.ripard@bootlin.com>
+Reviewed-by: Andre Przywara <andre.przywara@arm.com>
+Cc: Vagrant Cascadian <vagrant@debian.org>
+Reviewed-by: Jagan Teki <jagan@openedev.com>
+---
+ arch/arm/include/asm/arch-sunxi/mmc.h |  6 +++++-
+ drivers/mmc/sunxi_mmc.c               | 21 ++++++++++++++++++++-
+ 2 files changed, 25 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h b/arch/arm/include/asm/arch-sunxi/mmc.h
+index d98c53faaa..f2deafddd2 100644
+--- a/arch/arm/include/asm/arch-sunxi/mmc.h
++++ b/arch/arm/include/asm/arch-sunxi/mmc.h
+@@ -46,7 +46,9 @@ struct sunxi_mmc {
+ 	u32 cbda;		/* 0x94 */
+ 	u32 res2[26];
+ #if defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_MACH_SUN50I_H6)
+-	u32 res3[64];
++	u32 res3[17];
++	u32 samp_dl;
++	u32 res4[46];
+ #endif
+ 	u32 fifo;		/* 0x100 / 0x200 FIFO access address */
+ };
+@@ -130,5 +132,7 @@ struct sunxi_mmc {
+ #define SUNXI_MMC_COMMON_CLK_GATE		(1 << 16)
+ #define SUNXI_MMC_COMMON_RESET			(1 << 18)
+ 
++#define SUNXI_MMC_CAL_DL_SW_EN		(0x1 << 7)
++
+ struct mmc *sunxi_mmc_init(int sdc_no);
+ #endif /* _SUNXI_MMC_H */
+diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
+index 39f15eb423..147eb9b4d5 100644
+--- a/drivers/mmc/sunxi_mmc.c
++++ b/drivers/mmc/sunxi_mmc.c
+@@ -99,11 +99,16 @@ static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv, unsigned int hz)
+ {
+ 	unsigned int pll, pll_hz, div, n, oclk_dly, sclk_dly;
+ 	bool new_mode = false;
++	bool calibrate = false;
+ 	u32 val = 0;
+ 
+ 	if (IS_ENABLED(CONFIG_MMC_SUNXI_HAS_NEW_MODE) && (priv->mmc_no == 2))
+ 		new_mode = true;
+ 
++#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUN50I_H6)
++	calibrate = true;
++#endif
++
+ 	/*
+ 	 * The MMC clock has an extra /2 post-divider when operating in the new
+ 	 * mode.
+@@ -174,7 +179,11 @@ static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv, unsigned int hz)
+ 		val = CCM_MMC_CTRL_MODE_SEL_NEW;
+ 		setbits_le32(&priv->reg->ntsr, SUNXI_MMC_NTSR_MODE_SEL_NEW);
+ #endif
+-	} else {
++	} else if (!calibrate) {
++		/*
++		 * Use hardcoded delay values if controller doesn't support
++		 * calibration
++		 */
+ 		val = CCM_MMC_CTRL_OCLK_DLY(oclk_dly) |
+ 			CCM_MMC_CTRL_SCLK_DLY(sclk_dly);
+ 	}
+@@ -228,6 +237,16 @@ static int mmc_config_clock(struct sunxi_mmc_priv *priv, struct mmc *mmc)
+ 	rval &= ~SUNXI_MMC_CLK_DIVIDER_MASK;
+ 	writel(rval, &priv->reg->clkcr);
+ 
++#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUN50I_H6)
++	/* A64 supports calibration of delays on MMC controller and we
++	 * have to set delay of zero before starting calibration.
++	 * Allwinner BSP driver sets a delay only in the case of
++	 * using HS400 which is not supported by mainline U-Boot or
++	 * Linux at the moment
++	 */
++	writel(SUNXI_MMC_CAL_DL_SW_EN, &priv->reg->samp_dl);
++#endif
++
+ 	/* Re-enable Clock */
+ 	rval |= SUNXI_MMC_CLK_ENABLE;
+ 	writel(rval, &priv->reg->clkcr);
+-- 
+2.11.0
+

gnu/packages/patches/u-boot-pinebook-r_i2c-controller.patch

@@ -0,0 +1,70 @@
+From 31a4ac4d79d75baeede3edfa95515fd4169ef502 Mon Sep 17 00:00:00 2001
+From: Vasily Khoruzhick <anarsoul@gmail.com>
+Date: Mon, 5 Nov 2018 20:24:30 -0800
+Subject: [PATCH 09/13] sun50i: A64: add support for R_I2C controller
+
+Allwinner A64 has a I2C controller, which is in the R_ MMIO zone and has
+two groups of pinmuxes on PL bank, so it's called R_I2C.
+
+Add support for this I2C controller and the pinmux which doesn't conflict
+with RSB.
+
+Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
+Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
+Tested-by: Maxime Ripard <maxime.ripard@bootlin.com>
+Cc: Vagrant Cascadian <vagrant@debian.org>
+Acked-by: Jagan Teki <jagan@openedev.com>
+---
+ arch/arm/include/asm/arch-sunxi/gpio.h | 1 +
+ arch/arm/mach-sunxi/Kconfig            | 1 +
+ board/sunxi/board.c                    | 6 ++++++
+ 3 files changed, 8 insertions(+)
+
+diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
+index 6a5eafc3d3..2daf23f6f5 100644
+--- a/arch/arm/include/asm/arch-sunxi/gpio.h
++++ b/arch/arm/include/asm/arch-sunxi/gpio.h
+@@ -211,6 +211,7 @@ enum sunxi_gpio_number {
+ #define SUN8I_H3_GPL_R_TWI	2
+ #define SUN8I_A23_GPL_R_TWI	3
+ #define SUN8I_GPL_R_UART	2
++#define SUN50I_GPL_R_TWI	2
+ 
+ #define SUN9I_GPN_R_RSB		3
+ 
+diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
+index 6277abc3cc..560dc9b25d 100644
+--- a/arch/arm/mach-sunxi/Kconfig
++++ b/arch/arm/mach-sunxi/Kconfig
+@@ -278,6 +278,7 @@ config MACH_SUN50I
+ 	select ARM64
+ 	select DM_I2C
+ 	select PHY_SUN4I_USB
++	select SUN6I_PRCM
+ 	select SUNXI_DE2
+ 	select SUNXI_GEN_SUN6I
+ 	select SUPPORT_SPL
+diff --git a/board/sunxi/board.c b/board/sunxi/board.c
+index b196d48674..64ccbc7245 100644
+--- a/board/sunxi/board.c
++++ b/board/sunxi/board.c
+@@ -168,10 +168,16 @@ void i2c_init_board(void)
+ #endif
+ 
+ #ifdef CONFIG_R_I2C_ENABLE
++#ifdef CONFIG_MACH_SUN50I
++	clock_twi_onoff(5, 1);
++	sunxi_gpio_set_cfgpin(SUNXI_GPL(8), SUN50I_GPL_R_TWI);
++	sunxi_gpio_set_cfgpin(SUNXI_GPL(9), SUN50I_GPL_R_TWI);
++#else
+ 	clock_twi_onoff(5, 1);
+ 	sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN8I_H3_GPL_R_TWI);
+ 	sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN8I_H3_GPL_R_TWI);
+ #endif
++#endif
+ }
+ 
+ #if defined(CONFIG_ENV_IS_IN_MMC) && defined(CONFIG_ENV_IS_IN_FAT)
+-- 
+2.11.0
+

gnu/packages/patches/u-boot-pinebook-syscon-node.patch

@@ -0,0 +1,38 @@
+From ababb5920e8992c9bb7956df3cc85dc68d27dfe8 Mon Sep 17 00:00:00 2001
+From: Andre Przywara <andre.przywara@arm.com>
+Date: Mon, 29 Oct 2018 00:56:48 +0000
+Subject: [PATCH 04/13] sunxi: A64: Re-add syscon to DT node
+
+The sun50i-a64.dtsi changes introduced in Linux v4.19-rc1 changed the
+compatible name for the syscon controller, dropping the generic "syscon"
+fallback. Using this new DT node will make the Ethernet driver in every
+older kernel (or non-Linux kernels) fail to initialise the MAC device.
+
+To allow booting distribution kernels (from installer images via UEFI,
+for instance), re-add the syscon compatible string as a fallback. This
+works with both older and newer kernels.
+
+Signed-off-by: Andre Przywara <andre.przywara@arm.com>
+Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
+Reviewed-by: Jagan Teki <jagan@openedev.com>
+---
+ arch/arm/dts/sun50i-a64.dtsi | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/arch/arm/dts/sun50i-a64.dtsi b/arch/arm/dts/sun50i-a64.dtsi
+index f3a66f8882..ff41abc96a 100644
+--- a/arch/arm/dts/sun50i-a64.dtsi
++++ b/arch/arm/dts/sun50i-a64.dtsi
+@@ -259,7 +259,8 @@
+ 		};
+ 
+ 		syscon: syscon@1c00000 {
+-			compatible = "allwinner,sun50i-a64-system-control";
++			compatible = "allwinner,sun50i-a64-system-control",
++				"syscon";
+ 			reg = <0x01c00000 0x1000>;
+ 			#address-cells = <1>;
+ 			#size-cells = <1>;
+-- 
+2.11.0
+

gnu/packages/patches/u-boot-pinebook-video-bridge.patch

@@ -0,0 +1,50 @@
+From 8336a43792a103c13d939b3925cb75322911f7fb Mon Sep 17 00:00:00 2001
+From: Vasily Khoruzhick <anarsoul@gmail.com>
+Date: Mon, 5 Nov 2018 20:24:29 -0800
+Subject: [PATCH 08/13] dm: video: bridge: don't fail to activate bridge if
+ reset or sleep GPIO is missing
+
+Both GPIOs are optional, so we shouldn't fail if any is missing.
+Without this fix reset is not deasserted if sleep GPIO is missing.
+
+Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
+Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
+Tested-by: Maxime Ripard <maxime.ripard@bootlin.com>
+Reviewed-by: Andre Przywara <andre.przywara@arm.com>
+Cc: Vagrant Cascadian <vagrant@debian.org>
+---
+ drivers/video/bridge/video-bridge-uclass.c | 16 +++++++++++-----
+ 1 file changed, 11 insertions(+), 5 deletions(-)
+
+diff --git a/drivers/video/bridge/video-bridge-uclass.c b/drivers/video/bridge/video-bridge-uclass.c
+index cd4959cc71..5fecb4cfd5 100644
+--- a/drivers/video/bridge/video-bridge-uclass.c
++++ b/drivers/video/bridge/video-bridge-uclass.c
+@@ -106,13 +106,19 @@ static int video_bridge_pre_probe(struct udevice *dev)
+ int video_bridge_set_active(struct udevice *dev, bool active)
+ {
+ 	struct video_bridge_priv *uc_priv = dev_get_uclass_priv(dev);
+-	int ret;
++	int ret = 0;
+ 
+ 	debug("%s: %d\n", __func__, active);
+-	ret = dm_gpio_set_value(&uc_priv->sleep, !active);
+-	if (ret)
+-		return ret;
+-	if (active) {
++	if (uc_priv->sleep.dev) {
++		ret = dm_gpio_set_value(&uc_priv->sleep, !active);
++		if (ret)
++			return ret;
++	}
++
++	if (!active)
++		return 0;
++
++	if (uc_priv->reset.dev) {
+ 		ret = dm_gpio_set_value(&uc_priv->reset, true);
+ 		if (ret)
+ 			return ret;
+-- 
+2.11.0
+

gnu/packages/photo.scm

@@ -69,14 +69,14 @@
 (define-public libraw
   (package
     (name "libraw")
-    (version "0.19.0")
+    (version "0.19.1")
     (source (origin
               (method url-fetch)
               (uri (string-append "https://www.libraw.org/data/LibRaw-"
                                   version ".tar.gz"))
               (sha256
                (base32
-                "0nfj7s7qmgfy1cl8s3ck7dxjvprfq5glfi6iidmvmy8r7gl52gz8"))))
+                "1xjyw4n9gfr2r637pjbpbi3h98h9mdjn61b0hsxwqynq2vdij452"))))
     (build-system gnu-build-system)
     (native-inputs
      `(("pkg-config" ,pkg-config)))

gnu/packages/python-crypto.scm

@@ -18,6 +18,7 @@
 ;;; Copyright © 2018 Tomáš Čech <sleep_walker@gnu.org>
 ;;; Copyright © 2018 Nicolas Goaziou <mail@nicolasgoaziou.fr>
 ;;; Copyright © 2018 Vagrant Cascadian <vagrant@debian.org>
+;;; Copyright © 2018 Nam Nguyen <namn@berkeley.edu>
 ;;;
 ;;; This file is part of GNU Guix.
 ;;;
@@ -970,3 +971,33 @@ been constructed to maintain extensive documentation on how to use
     (description "This is a set of Python bindings for the scrypt key
 derivation function.")
     (license license:bsd-2)))
+
+(define-public python-service-identity
+  (package
+    (name "python-service-identity")
+    (version "17.0.0")
+    (source
+     (origin
+       (method url-fetch)
+       (uri (pypi-uri "service_identity" version))
+       (sha256
+        (base32
+         "1aq24cn3nnsjr9g797dayhx4g653h6bd41ksqhidzq0rvarzn0a0"))))
+    (build-system python-build-system)
+    (propagated-inputs
+     `(("python-attrs" ,python-attrs)
+       ("python-pyasn1" ,python-pyasn1)
+       ("python-pyasn1-modules" ,python-pyasn1-modules)
+       ("python-pyopenssl" ,python-pyopenssl)))
+    (home-page "https://service-identity.readthedocs.io/")
+    (synopsis "Service identity verification for PyOpenSSL")
+    (description
+     "@code{service_identity} aspires to give you all the tools you need
+for verifying whether a certificate is valid for the intended purposes.
+In the simplest case, this means host name verification.  However,
+service_identity implements RFC 6125 fully and plans to add other
+relevant RFCs too.")
+    (license license:expat)))
+
+(define-public python2-service-identity
+  (package-with-python2 python-service-identity))

gnu/packages/python.scm

@@ -14610,14 +14610,14 @@ run on top of the dynamic task schedulers. ")
 (define-public python-ilinkedlist
   (package
     (name "python-ilinkedlist")
-    (version "0.3.1")
+    (version "0.4.0")
     (source
      (origin
        (method url-fetch)
        (uri (pypi-uri "ilinkedlist" version))
        (sha256
         (base32
-         "04wpv7km8jggrngc4bjg3nm615czd3bjdvpsy2icg6c1c8162zyg"))))
+         "0nrw4sr3afldrp7073hvc0rgdz282s0l819jdmj1i6nn05v33h0l"))))
     (build-system python-build-system)
     (native-inputs `(("python-pytest" ,python-pytest)))
     (inputs `(("python" ,python)))

gnu/packages/xorg.scm

@@ -5962,7 +5962,7 @@ basic eye-candy effects.")
 (define-public xpra
   (package
     (name "xpra")
-    (version "2.4.1")
+    (version "2.4.2")
     (source
      (origin
        (method url-fetch)
@@ -5970,7 +5970,7 @@ basic eye-candy effects.")
                            version ".tar.xz"))
        (sha256
         (base32
-         "1bhk6vydsrhlngvrv5w55arqf69cr3yw84xscnnl7km2g1iswkrs"))))
+         "01x4ri0arfq9cn01bh80h232lsj95jp6j1zw0z0q7a6mwrw4gr6i"))))
     (build-system python-build-system)
     (inputs `(("ffmpeg" ,ffmpeg)
               ("flac" ,flac)

gnu/system/install.scm

@@ -53,6 +53,7 @@
             nintendo-nes-classic-edition-installation-os
             novena-installation-os
             pine64-plus-installation-os
+            pinebook-installation-os
             rk3399-puma-installation-os
             wandboard-installation-os
             os-with-u-boot))
@@ -473,6 +474,11 @@ The bootloader BOOTLOADER is installed to BOOTLOADER-TARGET."
                             "/dev/mmcblk0" ; SD card storage
                             "ttyS0"))
 
+(define pinebook-installation-os
+  (embedded-installation-os u-boot-pinebook-bootloader
+                            "/dev/mmcblk0" ; SD card storage
+                            "ttyS0"))
+
 (define rk3399-puma-installation-os
   (embedded-installation-os u-boot-puma-rk3399-bootloader
                             "/dev/mmcblk0" ; SD card storage

guix/scripts/describe.scm

@@ -1,5 +1,6 @@
 ;;; GNU Guix --- Functional package management for GNU
 ;;; Copyright © 2018 Ludovic Courtès <ludo@gnu.org>
+;;; Copyright © 2018 Oleg Pykhalov <go.wigust@gmail.com>
 ;;;
 ;;; This file is part of GNU Guix.
 ;;;
@@ -18,11 +19,13 @@
 
 (define-module (guix scripts describe)
   #:use-module ((guix ui) #:hide (display-profile-content))
+  #:use-module (guix channels)
   #:use-module (guix scripts)
   #:use-module (guix describe)
   #:use-module (guix profiles)
   #:use-module ((guix scripts pull) #:select (display-profile-content))
   #:use-module (git)
+  #:use-module (json)
   #:use-module (srfi srfi-1)
   #:use-module (srfi srfi-37)
   #:use-module (ice-9 match)
@@ -38,7 +41,7 @@
   ;; Specifications of the command-line options.
   (list (option '(#\f "format") #t #f
                 (lambda (opt name arg result)
-                  (unless (member arg '("human" "channels"))
+                  (unless (member arg '("human" "channels" "json" "recutils"))
                     (leave (G_ "~a: unsupported output format~%") arg))
                   (alist-cons 'format (string->symbol arg) result)))
         (option '(#\p "profile") #t #f
@@ -84,6 +87,22 @@ Display information about the channels currently in use.\n"))
         (format #t (G_ "~%;; warning: GUIX_PACKAGE_PATH=\"~a\"~%")
                 string))))))
 
+(define (channel->sexp channel)
+  `(channel
+    (name ,(channel-name channel))
+    (url ,(channel-url channel))
+    (commit ,(channel-commit channel))))
+
+(define (channel->json channel)
+  (scm->json-string `((name . ,(channel-name channel))
+                      (url . ,(channel-url channel))
+                      (commit . ,(channel-commit channel)))))
+
+(define (channel->recutils channel port)
+  (format port "name: ~a~%" (channel-name channel))
+  (format port "url: ~a~%" (channel-url channel))
+  (format port "commit: ~a~%" (channel-commit channel)))
+
 (define* (display-checkout-info fmt #:optional directory)
   "Display information about the current checkout according to FMT, a symbol
 denoting the requested format.  Exit if the current directory does not lie
@@ -104,10 +123,19 @@ within a Git checkout."
        (format #t (G_ "  branch: ~a~%") (reference-shorthand head))
        (format #t (G_ "  commit: ~a~%") commit))
       ('channels
-       (pretty-print `(list (channel
+       (pretty-print `(list ,(channel->sexp (channel (name 'guix)
-                             (name 'guix)
+                                                     (url (dirname directory))
-                             (url ,(dirname directory))
+                                                     (commit commit))))))
-                             (commit ,commit))))))
+      ('json
+       (display (channel->json (channel (name 'guix)
+                                        (url (dirname directory))
+                                        (commit commit))))
+       (newline))
+      ('recutils
+       (channel->recutils (channel (name 'guix)
+                                   (url (dirname directory))
+                                   (commit commit))
+                          (current-output-port))))
     (display-package-search-path fmt)))
 
 (define (display-profile-info profile fmt)
@@ -116,26 +144,23 @@ in the format specified by FMT."
   (define number
     (generation-number profile))
 
-  (match fmt
+  (define channels
-    ('human
+    (map (lambda (entry)
-     (display-profile-content profile number))
-    ('channels
-     (pretty-print
-      `(list ,@(map (lambda (entry)
            (match (assq 'source (manifest-entry-properties entry))
              (('source ('repository ('version 0)
                                     ('url url)
                                     ('branch branch)
                                     ('commit commit)
                                     _ ...))
-                         `(channel (name ',(string->symbol
+              (channel (name (string->symbol (manifest-entry-name entry)))
-                                            (manifest-entry-name entry)))
+                       (url url)
-                                   (url ,url)
+                       (commit commit)))
-                                   (commit ,commit)))
 
              ;; Pre-0.15.0 Guix does not provide that information,
              ;; so there's not much we can do in that case.
-                        (_ '???)))
+             (_ (channel (name 'guix)
+                         (url "?")
+                         (commit "?")))))
 
          ;; Show most recently installed packages last.
          (reverse
@@ -143,7 +168,22 @@ in the format specified by FMT."
            (profile-manifest
             (if (zero? number)
                 profile
-                           (generation-file-name profile number))))))))))
+                (generation-file-name profile number)))))))
+
+  (match fmt
+    ('human
+     (display-profile-content profile number))
+    ('channels
+     (pretty-print `(list ,@(map channel->sexp channels))))
+    ('json
+     (format #t "[~a]~%" (string-join (map channel->json channels) ",")))
+    ('recutils
+     (format #t "~{~a~%~}"
+             (map (lambda (channel)
+                    (with-output-to-string
+                      (lambda ()
+                        (channel->recutils channel (current-output-port)))))
+                  channels))))
   (display-package-search-path fmt))
 
 

guix/scripts/pack.scm

@@ -149,6 +149,7 @@ dependencies are registered."
 
 (define* (self-contained-tarball name profile
                                  #:key target
+                                 (profile-name "guix-profile")
                                  deduplicate?
                                  (compressor (first %compressors))
                                  localstatedir?
@@ -221,6 +222,7 @@ added to the pack."
           ;; <http://lists.gnu.org/archive/html/bug-tar/2017-11/msg00009.html>.
           (populate-single-profile-directory %root
                                              #:profile #$profile
+                                             #:profile-name #$profile-name
                                              #:closure "profile"
                                              #:database #+database)
 
@@ -279,6 +281,7 @@ added to the pack."
 
 (define* (squashfs-image name profile
                          #:key target
+                         (profile-name "guix-profile")
                          (compressor (first %compressors))
                          localstatedir?
                          (symlinks '())
@@ -377,6 +380,7 @@ added to the pack."
 
 (define* (docker-image name profile
                        #:key target
+                       (profile-name "guix-profile")
                        (compressor (first %compressors))
                        localstatedir?
                        (symlinks '())
@@ -587,6 +591,7 @@ please email '~a'~%")
 (define %default-options
   ;; Alist of default option values.
   `((format . tarball)
+    (profile-name . "guix-profile")
     (system . ,(%current-system))
     (substitutes? . #t)
     (build-hook? . #t)
@@ -658,6 +663,13 @@ please email '~a'~%")
          (option '("localstatedir") #f #f
                  (lambda (opt name arg result)
                    (alist-cons 'localstatedir? #t result)))
+         (option '("profile-name") #t #f
+                 (lambda (opt name arg result)
+                   (match arg
+                     ((or "guix-profile" "current-guix")
+                      (alist-cons 'profile-name arg result))
+                     (_
+                      (leave (G_ "~a: unsupported profile name~%") arg)))))
          (option '("bootstrap") #f #f
                  (lambda (opt name arg result)
                    (alist-cons 'bootstrap? #t result)))
@@ -690,6 +702,9 @@ Create a bundle of PACKAGE.\n"))
   -m, --manifest=FILE    create a pack with the manifest from FILE"))
   (display (G_ "
       --localstatedir    include /var/guix in the resulting pack"))
+  (display (G_ "
+      --profile-name=NAME
+                         populate /var/guix/profiles/.../NAME"))
   (display (G_ "
       --bootstrap        use the bootstrap binaries to build the pack"))
   (newline)
@@ -779,7 +794,8 @@ Create a bundle of PACKAGE.\n"))
                                 (#f
                                  (leave (G_ "~a: unknown pack format~%")
                                         pack-format))))
-                 (localstatedir? (assoc-ref opts 'localstatedir?)))
+                 (localstatedir? (assoc-ref opts 'localstatedir?))
+                 (profile-name   (assoc-ref opts 'profile-name)))
             (run-with-store store
               (mlet* %store-monad ((profile (profile-derivation
                                              manifest
@@ -798,6 +814,8 @@ Create a bundle of PACKAGE.\n"))
                                                      symlinks
                                                      #:localstatedir?
                                                      localstatedir?
+                                                     #:profile-name
+                                                     profile-name
                                                      #:archiver
                                                      archiver)))
                 (mbegin %store-monad

guix/status.scm

@@ -393,6 +393,9 @@ addition to build events."
   expected hash: ~a
   actual hash:   ~a~%"))
              expected actual))
+    (('build-remote drv host _ ...)
+     (format port (info (G_ "offloading build of ~a to '~a'")) drv host)
+     (newline port))
     (('build-log pid line)
      (if (multiplexed-output-supported?)
          (if (not pid)

guix/store/database.scm

@@ -53,7 +53,7 @@
 
 (define sqlite-exec
   ;; XXX: This is was missing from guile-sqlite3 until
-  ;; <https://notabug.org/civodul/guile-sqlite3/commit/b87302f9bcd18a286fed57b2ea521845eb1131d7>.
+  ;; <https://notabug.org/guile-sqlite3/guile-sqlite3/commit/b87302f9bcd18a286fed57b2ea521845eb1131d7>.
   (let ((exec (pointer->procedure
                int
                (dynamic-func "sqlite3_exec" (@@ (sqlite3) libsqlite3))

m4/guix.m4

@@ -162,7 +162,7 @@ dnl Check whether a recent-enough Guile-Sqlite3 is available.
 AC_DEFUN([GUIX_CHECK_GUILE_SQLITE3], [
   dnl Check whether 'sqlite-bind-arguments' is available.  It was introduced
   dnl in February 2018:
-  dnl <https://notabug.org/civodul/guile-sqlite3/commit/1cd1dec96a9999db48c0ff45bab907efc637247f>.
+  dnl <https://notabug.org/guile-sqlite3/guile-sqlite3/commit/1cd1dec96a9999db48c0ff45bab907efc637247f>.
   AC_CACHE_CHECK([whether Guile-Sqlite3 is available and recent enough],
     [guix_cv_have_recent_guile_sqlite3],
     [GUILE_CHECK([retval],

tests/guix-pack-localstatedir.sh

@@ -0,0 +1,69 @@
+# GNU Guix --- Functional package management for GNU
+# Copyright © 2018 Ludovic Courtès <ludo@gnu.org>
+#
+# This file is part of GNU Guix.
+#
+# GNU Guix is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or (at
+# your option) any later version.
+#
+# GNU Guix is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Guix.  If not, see <http://www.gnu.org/licenses/>.
+
+#
+# Test the 'guix pack --localstatedir' command-line utility.
+#
+
+guix pack --version
+
+# 'guix pack --localstatedir' produces derivations that depend on
+# guile-sqlite3 and guile-gcrypt.  To make that relatively inexpensive, run
+# the test in the user's global store if possible, on the grounds that
+# binaries may already be there or can be built or downloaded inexpensively.
+
+NIX_STORE_DIR="`guile -c '(use-modules (guix config))(display %storedir)'`"
+localstatedir="`guile -c '(use-modules (guix config))(display %localstatedir)'`"
+GUIX_DAEMON_SOCKET="$localstatedir/guix/daemon-socket/socket"
+export NIX_STORE_DIR GUIX_DAEMON_SOCKET
+
+if ! guile -c '(use-modules (guix)) (exit (false-if-exception (open-connection)))'
+then
+    exit 77
+fi
+
+# Build a tarball with '--localstatedir'
+the_pack="`guix pack -C none --localstatedir --profile-name=current-guix \
+            guile-bootstrap`"
+test_directory="`mktemp -d`"
+trap 'chmod -Rf +w "$test_directory"; rm -rf "$test_directory"' EXIT
+
+cd "$test_directory"
+tar -xf "$the_pack"
+
+profile="`find -name current-guix`"
+test "`readlink $profile`" = "current-guix-1-link"
+test -s "`dirname $profile`/../../../db/db.sqlite"
+test -x ".`guix build guile-bootstrap`/bin/guile"
+cd -
+
+# Make sure the store database is not completely bogus.
+guile -c "(use-modules (sqlite3) (guix config) (ice-9 match))
+
+  (define db
+    (sqlite-open (string-append \"$test_directory\"
+                                %localstatedir
+                               \"/guix/db/db.sqlite\")
+                 SQLITE_OPEN_READONLY))
+
+  (define stmt
+    (sqlite-prepare db \"SELECT * FROM ValidPaths;\"))
+
+  (match (sqlite-fold cons '() stmt)
+    ((#(ids paths hashes times derivers sizes) ...)
+     (exit (member \"`guix build guile-bootstrap`\" paths))))"