This avoids the hard-coded "/dev/sda1", which only made sense when the
image is run with "qemu-system-x86_64 -hda", not when it's passed to
Xen, etc.
Reported by Andreas Enge <andreas@enge.fr>.
* gnu/system/vm.scm (system-qemu-image): Define 'root-uuid', use it as
the 'device' field for "/", and pass it to 'qemu-image'.
This improves the performance of the shared store for operations involving
lots of files, e.g. searching through the store.
* gnu/system/vm.scm (mapping->file-system): Add cache=loose to options.
* gnu/bootloader/extlinux.scm (install-extlinux): Factorize bootloader
writing in a new procedure write-file-on-device defined in (gnu build
bootloader).
* gnu/build/bootloader.scm: New file.
* gnu/local.mk (GNU_SYSTEM_MODULES): Add new file.
* gnu/system/vm.scm (qemu-img): Adapt to import and use (gnu build bootloader)
module during derivation building.
* gnu/scripts/system.scm (bootloader-installer-derivation): Ditto.
* gnu/build/vm.scm (load-in-linux-vm): New argument #:target-arm32.
Use it to adapt command for qemu-system-arm. This implies to choose a
machine ("virt"), use the correct console port "ttyAMA0", disable KVM use
that is buggy on some ARM boards (Odroid XU4 for example) and use user mode
network stack instead of NIC. Gather all those options in a new variable
"arch-specific-flags".
* gnu/system/vm.scm (expression->derivation-in-linux-vm): Pass
to load-in-linux-vm "#:target-arm32?" argument.
* gnu/system/vm.scm (qemu-img): Do not add EFI partition if we are targetting
ARM.
UEFI support on u-boot is still experimental, so do not add EFI partition on
ARM for now.
* gnu/system/vm.scm (system-disk-image, system-qemu-image,
virtualized-operating-system): Replace base-initrd by
(operating-system-initrd os).
The system produced were always using base-initrd even if the user had
defined a custom initrd based on raw-initrd in the os declaration.
* gnu/system/vm.scm (operating-system-uuid): Use 2^32 - 1 instead of
2^32 as hash size.
On some 32 bit system (ARM for example), 2^32 exceeds hash max
size (ULONG_MAX = 2^32 - 1).
* gnu/system/vm.scm (qemu-image): When guessing the root-size, use a lower
bound of 20 MiB, otherwise the root file system size is sometimes 0 MiB in
size.
This makes collisions less likely than when using a label to look up the
partition. See <https://bugs.gnu.org/27735>.
* gnu/system/vm.scm (operating-system-uuid): New procedure.
(system-disk-image): Define 'root-uuid' and use it for the root file
system. Pass it to 'iso9660-image' and 'qemu-image'.
Conceptually a UUID is just a bytevector. However, there's software out
there such as GRUB that relies on the string representation of different
UUID types (e.g., the string representation of DCE UUIDs differs from
that of ISO-9660 UUIDs, even if they are actually bytevectors of the
same length). This new <uuid> record type allows us to preserve
information about the type of UUID so we can eventually convert it to a
string using the right representation.
* gnu/system/uuid.scm (<uuid>): New record type.
(bytevector->uuid): New procedure.
(uuid): Return calls to 'make-uuid'.
(uuid->string): Rewrite using 'match-lambda*' to accept a single 'uuid?'
argument.
* gnu/bootloader/grub.scm (grub-root-search): Check for 'uuid?' instead
of 'bytevector?'.
* gnu/system.scm (bootable-kernel-arguments): Check whether ROOT-DEVICE
is 'uuid?'.
(read-boot-parameters): Use 'bytevector->uuid' when the
store device is a bytevector.
(read-boot-parameters-file): Check for 'uuid?' instead of 'bytevector?'.
(device->sexp): New procedure.
(operating-system-boot-parameters-file): Use it for 'root-device' and
'store'.
(operating-system-bootcfg): Remove conditional in definition of
'root-device'.
* gnu/system/file-systems.scm (file-system->spec): Check for 'uuid?' on
DEVICE and take its bytevector.
* gnu/system/mapped-devices.scm (open-luks-device): Likewise.
* gnu/system/vm.scm (iso9660-image): Call 'uuid-bytevector' for the
#:volume-uuid argument.
* gnu/system/vm.scm (system-qemu-image/shared-store-script): Add
#:options parameter and honor it.
(<virtual-machine>): New record type.
(virtual-machine): New macro.
(port-forwardings->qemu-options, virtual-machine-compiler): New
procedures.
* gnu/system/vm.scm (expression->derivation-in-linux-vm): Add
#:single-file-output? and pass it to 'load-in-linux-vm'.
(iso9660-image): Pass #:single-file-output? to
'expression->derivation-in-linux-vm'.
* gnu/build/vm.scm (load-in-linux-vm): Add #:single-file-output? and
honor it.
* gnu/build/vm.scm (initialize-hard-disk): Use "GuixSD" as label.
* gnu/system/install.scm (installation-os): Use "GuixSD" as label.
* gnu/system/vm.scm (system-disk-image): Use "GuixSD" or "GUIXSD" as volume
label.
Co-authored-by: Ludovic Courtès <ludo@gnu.org>
* build-aux/hydra/gnu-system.scm (qemu-jobs): Add 'iso9660-image .
* gnu/build/vm.scm (make-iso9660-image): New variable. Export it.
* gnu/system/vm.scm (iso9660-image): New variable. Use make-iso9660-image.
(system-disk-image): Use iso9660-image.
* gnu/build/vm.scm (estimated-partition-size): New procedure.
* gnu/system/vm.scm (expression->derivation-in-linux-vm):
Change #:disk-image-size default to 'guess.
[builder]: When DISK-IMAGE-SIZE is 'guess, use
'estimated-partition-size' and compute and estimate of the image size.
(qemu-image): Likewise.
* guix/build/store-copy.scm (file-size, closure-size): New procedures.
* guix/scripts/system.scm (%default-options): Change 'image-size' to
'guess.
* doc/guix.texi (Building the Installation Image): Remove '--image-size'
flag from example.
(Invoking guix system): Document the image size estimate.
* gnu/bootloader.scm: New file.
* gnu/bootloader/extlinux.scm: New file.
* gnu/bootloader/grub.scm: New file.
* gnu/local.mk: Build new files.
* gnu/system.scm: Adapt to new bootloader api.
* gnu/scripts/system.scm: Adapt to new bootloader api.
* gnu.scm: Remove (gnu system grub) and replace by (gnu bootloader) and (gnu
bootloader grub) modules.
* gnu/system/grub.scm: Moved content to gnu/bootloader/grub.scm.
* gnu/system/vm: Replace (gnu system grub) module by (gnu bootloader).
* gnu/tests.scm: Ditto.
* gnu/tests/nfs.scm: Ditto.
* gnu/system/vm.scm (virtualized-operating-system): Add full-boot?
option. Don't add a %store-mapping when full-boot? is passed. This leads
the grub-configuration-file procedure to look for the kernel and initrd in
/ instead of /gnu/store.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services.scm (activation-script): Remove code to set '%load-path'
and use 'with-imported-modules' instead.
(cleanup-gexp): Likewise.
* gnu/system/vm.scm (%vm-module-closure): New variable.
(expression->derivation-in-linux-vm): Remove #:modules.
[loader]: Remove code to set '%load-path'.
[builder]: Use %VM-MODULE-CLOSURE.
(qemu-image): Use 'with-imported-modules'.
Ludovic Courtès