[
  {
    "name": "Salame",
    "description": "25 e 90 di umidità per 12h poi passa a 20 e 80-85 per 4gg e poi 16 gradi circa a 80 per una ventina di giorni un mesetto",
    "controllers": [
      "(make-duty-controller \"humidifier\" 0.6 100 '<)",
      "(make-duty-controller \"freezer\" 0.4 100 '>)",
      "(make-duty-controller \"heater\" 1.0 100 '>)"
    ],
    "phases": [
      {
        "name": "Prepare",
        "description": "Turn Fan On",
        "exit_condition": "#t",
        "on_load": "(set-actuator \"fan\" #t)",
        "on_exit": "#t"
      },
      {
        "name": "Keep",
        "description": "Keep",
        "exit_condition": "#f",
        "on_load": "(begin \n(set-controller \"freezer\" \"T_ext\")(set-controller \"humidifier\" \"H_ext\")\n(set-controller \"heater\" \"T_ext2\")\n(set-target \"H_ext\" 90.0)\n(set-target \"T_ext2\" 25.0)\n(set-target \"T_ext\" 25.0))",
        "on_exit": ""
      }
    ]
  },
  {
    "name": "Pollo CBT",
    "description": "Cuoce il pollo in vasetto a bassa temperatura",
    "controllers": [
      "(make-duty-controller \"heater\" 0.90 60 '<)",
      "(make-duty-controller \"heater2\" 0.90 60 '<)"
    ],
    "phases": [
      {
        "name": "Prepare",
        "description": "Turn Fan On",
        "exit_condition": "#t",
        "on_load": "(set-actuator \"fan\" #t)",
        "on_exit": "#t"
      },
      {
        "name": "Heat",
        "description": "Reach 78°C",
        "exit_condition": "(>= (get-sensor \"T_ext\") 78.0)",
        "on_load": "(begin (set-controller \"heater\" \"T_food\")\n(set-controller \"heater2\" \"T_ext\")\n(set-target \"T_food\" 78.0)\n(set-target \"T_ext\" 78.0))",
        "on_exit": "(notify \"Temperatura raggiunta!\")"
      },
      {
        "name": "Hold",
        "description": "Keep 30°C",
        "exit_condition": "(> (time-in-this-phase) (hours 3))",
        "on_exit": "(notify \"Il pollo è cotto!\")",
        "on_load": "#t"
      }
    ]
  },
  {
    "name": "Koji Rice (MISO)",
    "description": "Tiene riso alla temperatura e umidità giuste per il koji",
    "controllers": [
      "(make-duty-controller \"heater\" 0.90 60 '<)",
      "(make-duty-controller \"humidifier\" 0.40 100 '<)"
    ],
    "phases": [
      {
        "name": "Prepare",
        "description": "Turn Fan On",
        "exit_condition": "#t",
        "on_load": "(set-actuator \"fan\" #t)",
        "on_exit": "#t"
      },
      {
        "name": "Cool Down",
        "description": "Wait until rice reaches 37",
        "exit_condition": "(<= (get-sensor \"T_food\") 37)",
        "on_load": "(begin (set-controller \"heater\" \"T_ext\")\n(set-controller \"humidifier\" \"H_ext\")\n(set-target \"T_ext\" 37.0)\n(set-target \"H_ext\" 90.0))",
        "on_exit": "#t"
      },
      {
        "name": "Inocula!",
        "description": "Add koji spores",
        "exit_condition": "(manual-intervention \"Inocula\" '((\"Fatto\" #t)))",
        "on_load": "(notify \"Inocula ora!\")",
        "on_exit": "(notify (concat \"Inoculated at \" (now)))"
      },
      {
        "name": "Hold",
        "description": "Keep 30°C",
        "exit_condition": "(> (time-in-this-phase) (hours 12))",
        "on_load": "(begin (set-controller \"heater\" \"T_food\")\n(set-controller \"humidifier\" \"H_ext\")\n(set-target \"T_food\" 30.0)\n(set-target \"H_ext\" 90.0))",
        "on_exit": "(notify \"Rimischia il koji!\")"
      },
      {
        "name": "Hold",
        "description": "Keep 30°C",
        "exit_condition": "(> (time-in-this-phase) (hours 12))",
        "on_exit": "(notify \"24 ore, controlla la temperatura\")",
        "on_load": "#t"
      },
      {
        "name": "Hold",
        "description": "Keep 30°C, abbassa l'umidità per favorire l'ingresso del koji nel chicco",
        "exit_condition": "(> (time-in-this-phase) (hours 12))",
        "on_load": "(begin (set-controller \"heater\" \"T_food\")\n(set-controller \"humidifier\" \"H_ext\")\n(set-target \"T_food\" 30.0)\n(set-target \"H_ext\" 80.0))",
        "on_exit": "(notify \"Rimischia il koji!\")"
      },
      {
        "name": "Hold",
        "description": "Keep 30°C",
        "exit_condition": "(> (time-in-this-phase) (hours 12))",
        "on_exit": "(notify \"Rimischia il koji!\")",
        "on_load": "#t"
      }
    ]
  },
  {
    "name": "Tepache",
    "description": "Tiene il tepache a ~23 gradi",
    "controllers": [
      "(make-duty-controller \"heater\" 0.20 120 '<)"
    ],
    "phases": [
      {
        "name": "Hold",
        "description": "Keep 23°C",
        "exit_condition": "(> (time-in-this-phase) (hours 10))",
        "on_load": "(begin (set-controller \"heater\" \"T_food\")\n(set-target \"T_food\" 23.0))",
        "on_exit": "#t"
      }
    ]
  },
  {
    "name": "Stracchino",
    "description": "Tiene lo stracchino a ~35 gradi per 24 ore",
    "controllers": [
      "(make-duty-controller \"heater\" 0.80 120 '<)"
    ],
    "phases": [
      {
        "name": "Hold",
        "description": "Keep 35°C",
        "exit_condition": "(> (time-in-this-phase) (hours 17))",
        "on_load": "(begin (set-controller \"heater\" \"T_food\")\n(set-target \"T_food\" 35.0))",
        "on_exit": "#t"
      }
    ]
  },
  {
    "name": "Yogurt",
    "description": "Lascia raffreddare lo yogurt per fare l'inoculo, mantiene a 42 gradi fino a che è pronto, e poi porta a 4 gradi.",
    "controllers": [
      "(make-duty-controller \"heater2\" 0.40 60 '<)",
      "(make-duty-controller \"freezer\" 0.75 (* 30 60) '>)"
    ],
    "phases": [
      {
        "name": "Prepare",
        "description": "Turn Fan On",
        "exit_condition": "#t",
        "on_load": "(set-actuator \"fan\" #t)",
        "on_exit": "#t"
      },
      {
        "name": "Cool",
        "description": "Cool to 46°C",
        "exit_condition": "(and (< (get-sensor \"T_food\") 46.0)\n(> (get-sensor \"T_food\") 42.0))",
        "on_load": "(begin (set-controller \"heater2\" \"T_food\") (set-target \"T_food\" 46.0) (set-controller \"freezer\" \"T_ext\") (set-target \"T_ext\" 46.0))",
        "on_exit": "#t"
      },
      {
        "name": "Inoculate (backslopping)",
        "description": "Add 50ml Yogurt",
        "exit_condition": "(manual-intervention \"Inocula 50g di yogurt\" '((\"Fatto\" #t)))",
        "on_load": "(notify \"Inoculate 50g of yogurt NOW!\")",
        "on_exit": "(notify (concat \"Inoculated at \" (now)))"
      },
      {
        "name": "Hold",
        "description": "Keep at 42°C for 4h",
        "exit_condition": "(> (time-in-this-phase) (hours 4))",
        "on_load": "(begin (set-target \"T_food\" 41.5) (set-target \"T_ext\" 47.0))",
        "on_exit": "(notify \"The yougrt is ready\")"
      },
      {
        "name": "Refrigerate",
        "description": "Lower temperature to 4gradi",
        "exit_condition": "#f",
        "on_load": "(begin (set-target \"T_food\" 4.0) (set-target \"T_ext\" 4.0))",
        "on_exit": "(begin (notify \"You can remove the yogurt from the heater\") (set-actuator \"fan\" #f))"
      }
    ]
  },
  {
    "name": "Nattō",
    "description": "FIXME",
    "controllers": [
      "(make-duty-controller \"heater\" 0.20 120 '<)"
    ],
    "phases": []
  },
  {
    "name": "Tempeh",
    "description": "FIXME",
    "controllers": [
      "(make-duty-controller \"heater\" 0.20 120 '<)"
    ],
    "phases": []
  },
  {
    "name": "Gorgonzola",
    "description": "FIXME",
    "controllers": [
      "(make-duty-controller \"heater\" 0.20 120 '<)"
    ],
    "phases": []
  }
]