midizap/examples/XTouchONE.midizaprc

116 lines
4.0 KiB
Plaintext

# The X-Touch ONE is a very capable Mackie device as it is, but it can still
# be improved a bit with some midizap magic. Most notably, the device lacks a
# SHIFT key, so we remap one of the lesser-used keys to provide an extra
# shifted layer which can be assigned freely to additional MC functions which
# aren't readily available on the device.
# NOTE: This config assumes that the X-Touch ONE is in its default Mackie
# mode. Otherwise you will have to adjust the mapping accordingly.
# Copyright (c) 2018 Albert Graef <aggraef@gmail.com>
# Copying and distribution of this file, with or without modification, are
# permitted in any medium without royalty provided the copyright notice and
# this notice are preserved. This file is offered as-is, without any
# warranty.
JACK_NAME "midizap-XTouchONE"
JACK_PORTS 2
# Automatic connections for the device and Ardour.
JACK_IN1 X-Touch One MIDI 1
JACK_OUT1 ardour:mackie control in
JACK_IN2 ardour:mackie control out
JACK_OUT2 X-Touch One MIDI 1
# Pass everything through, except for the mappings below.
PASSTHROUGH
SYSTEM_PASSTHROUGH
[MIDI]
# I use the SCRUB key (F8 in MC mode) as the SHIFT key, because Ardour doesn't
# need it. YMMV, though, so if you need that key, you'll have to substitute
# another one that you can spare in the rule below.
F8 SHIFT ^F8 RELEASE SHIFT ^F8
# Remap the shifted F1 .. F4 keys to do something useful. I have them bound to
# the most important encoder assignment keys here, but of course you can
# change them to anything you want.
^F#4 E3 # Track (Trim in Ardour)
^G4 F#3 # Pan
^G#4 F3 # Send
^A4 G3 # Plugin (not supported by Ardour)
# Remap the shifted F5 and F6 keys to F7 and F8 which are missing on the ONE.
^A#4 C5
^B4 C#5
# If you're using the encoder assignment keys, then most likely you also want
# to have a FLIP button; we (rather arbitrarily) assign it to the shifted SOLO
# button in the TRANSPORT section.
^F#7 D4 # Flip
# Since the X-Touch ONE is a single-channel controller, I like to have the
# bank and channel keys linked up with channel SELECT, so that the current
# channel is also selected in the DAW when switching banks. Therefore I have
# bound these functions to the shifted bank and channel keys here, but of
# course you can change them to anything you want.
^A#3 A#3 C2 # BANK< SELECT
^B3 B3 C2 # BANK> SELECT
^C4 C4 C2 # CHAN< SELECT
^C#4 C#4 C2 # CHAN> SELECT
# With the translations below, the other shifted buttons are simply passed
# through along with the MC SHIFT key (A#5). You can either assign these
# combinations in the DAW (e.g., I have the shifted left/right keys bound to
# the previous/next marker functions in Ardour), or just directly edit the
# bindings below as you see fit.
# NOTE: We use an explicit RELEASE sequence here, to prevent the MC SHIFT key
# from being released too early. (Note that by default, midizap will release
# MIDI key events in the same order in which they are pressed, which may not
# work in some key combinations. At least I found that this confuses Ardour in
# some cases.)
^C8 A#5 C8 RELEASE C8 A#5 # Up
^C#8 A#5 C#8 RELEASE C#8 A#5 # Down
^D8 A#5 D8 RELEASE D8 A#5 # Left
^D#8 A#5 D#8 RELEASE D#8 A#5 # Right
^E8 A#5 E8 RELEASE E8 A#5 # Zoom
^C0 A#5 C0 RELEASE C0 A#5 # SHIFT REC
^G#0 A#5 G#0 RELEASE G#0 A#5 # SHIFT SOLO
^E1 A#5 E1 RELEASE E1 A#5 # SHIFT MUTE
^C2 A#5 C2 RELEASE C2 A#5 # SHIFT SELECT
^C7 A#5 C7 RELEASE C7 A#5 # SHIFT MARKER
^C#7 A#5 C#7 RELEASE C#7 A#5 # SHIFT NUDGE
^D7 A#5 D7 RELEASE D7 A#5 # SHIFT CYCLE
^D#7 A#5 D#7 RELEASE D#7 A#5 # SHIFT DROP
^E7 A#5 E7 RELEASE E7 A#5 # SHIFT REPLACE
^F7 A#5 F7 RELEASE F7 A#5 # SHIFT CLICK
^G7 A#5 G7 RELEASE G7 A#5 # SHIFT REW
^G#7 A#5 G#7 RELEASE G#7 A#5 # SHIFT FFWD
^A7 A#5 A7 RELEASE A7 A#5 # SHIFT STOP
^A#7 A#5 A#7 RELEASE A#7 A#5 # SHIFT PLAY
^B7 A#5 B7 RELEASE B7 A#5 # SHIFT REC
[MIDI2]
# feedback for the (shifted) F1 .. F6 bindings and the remapped SOLO key
E3 F#4
F#3 G4
F3 G#4
A3 A4
C5 A#4
C#5 B4
D4 F#7 # FLIP -> SOLO