fc16085597
Hook up CircleCI for basic tests
...
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2019-08-13 13:34:16 +10:00
442dd5e53e
meson.build: add tuhi to the flake8 tests
...
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2019-08-13 13:34:16 +10:00
fe757ee116
Drop setup.py - we're on meson now
...
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2019-08-13 13:34:16 +10:00
a27fbe96dd
flake8 fixes
2019-08-13 13:34:16 +10:00
3e44e28707
Merge pull request #145 from whot/wip/tuhigui
...
Merge the TuhiGui into this repo
2019-08-09 15:28:29 +10:00
3641afc8bf
gui: print a warning when we can't connect to the screen
...
Because the exception thrown is less than obvious.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2019-08-09 15:26:43 +10:00
ee5640b783
Merge branch 'master' into wip/tuhigui
2019-08-09 15:22:07 +10:00
28cb94bc89
base: fix failing registration of new devices
...
Regression introduced in e1a3675439Fixes #148
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2019-08-09 15:18:00 +10:00
28fbddce78
gui: remove two more TuhiGUI leftovers from the About dialog
...
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2019-08-08 14:44:18 +10:00
0c333aa64b
gui: fix flake8 warnings
...
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2019-08-08 14:44:18 +10:00
0840f353d5
gui: render the drawings as oblongs in the right ratio
...
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2019-08-08 14:44:18 +10:00
ee68ec4bcc
gui: drop the Credits page from the About dialog
...
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2019-08-08 14:44:18 +10:00
35ab7ad621
gui: reverse-sort the drawings by timestamp before adding them
...
We want the most-recent drawings up the top. And since we always add to the
flowbox, we need to reverse-sort everything.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2019-08-08 14:44:18 +10:00
89559364cf
gui: fix categorization of drawings
...
Using the year/month as key only works if both are expanded properly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2019-08-08 14:44:18 +10:00
37d22dfaad
gui: drop the relative_time() helper, no longer used
...
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2019-08-08 14:44:18 +10:00
341b91349e
wacom: fix the data logger being off by one
...
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2019-08-02 09:30:36 +02:00
96df9fc416
wacom: make sure we only return the data packet size we want
...
If we have more data than our packet [1], let's not return the whole data
array. Slice it to size instead.
[1] this never happens with the current code, we don't work asynchronously
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2019-08-02 09:30:36 +02:00
eacc03b6ea
wacom: rename a function to make it more obvious
...
We're not checking for data here, we're taking the next message.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2019-08-02 09:30:36 +02:00
075fae13f9
flake 8 fixes
...
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2019-08-02 09:30:36 +02:00
6e27d70517
wacom: de-duplicate an opcode check
...
we don't need the same-ish check twice, we can just pop our non-list into a
list an go from there.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2019-08-02 09:30:36 +02:00
c84f3f8c63
wacom: error code 0x05 is an unrecognized command
...
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2019-08-02 09:30:36 +02:00
d3726420cf
wacom: add a comment describing where to we store stuff
...
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2019-08-02 09:30:36 +02:00
b009ea3c96
wacom: rename the mysterious bits to sysevent
...
These bits are used for system notifications
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2019-08-02 09:30:36 +02:00
cda4300388
wacom: visually align the UUIDs
...
And add # NOQA to shut up flake8
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2019-08-02 09:30:36 +02:00
92a9628adf
base: drop the separate function for bluez updates
...
A lambda does the job here without increasing the class profile
2019-07-30 14:06:49 +10:00
08e3ec532e
base: drop the extra function for checking if the device is in register mode
...
Now that it's just a one-liner, we don't need an extra function
2019-07-30 14:06:49 +10:00
37b9b2eefa
base: simplify check for in register mode
...
With a "or []" we can force this to be at least a 0-length list, obsoleting
the None check.
2019-07-30 14:06:49 +10:00
e1a3675439
base: ignore anything not from the known vendor IDs
...
We don't want to accidentally start talking to a device and brick it.
2019-07-30 14:06:49 +10:00
deb2c3ad2f
base: rename the hotplugged argument
...
This one is a bit confusing, because most of the time it's not a hotplug
event, it's just the RSSI property updating.
2019-07-30 14:06:49 +10:00
5b73c8ea2d
Add a few more comments to the codebase
2019-07-30 14:06:49 +10:00
764ad45ca2
wacom: normalize the pressure to the advertised [0, 0xffff] range
...
This requires adjusting the svg conversion in kete as well, afaict the 1000
range there was chosen because it's (almost) the midpoint of the Bamboo series
with 2048 pressure grades. So let's use half of 0x10000 instead, which is
approximately 0x8000 as the crow flies.
Fixes #142
2019-07-30 14:05:01 +10:00
a63355a03e
gui: we don't really do selection in the flowbox, so let's make it white
2019-07-23 12:58:08 +10:00
4e886fca2b
gui: only show the toolbox on enter
...
This is using opacity of 0% to hide them - this way the space stays allocated
and showing it doesn't rearrange things. Using visiblity here causes
everything to shift around on reveal.
2019-07-19 18:09:13 +10:00
0b9d4c2602
gui: round off the borders for the paper itself
...
Because we don't want to hurt ourselves on those sharp edges, do we?
2019-07-19 16:43:54 +10:00
d06b92e9af
gui: hook up a zoom slider
...
The default size of the drawings is a bit small now, good for an overview but
not for identifying which drawing to use now. Add a zoom slider for that.
2019-07-19 16:41:17 +10:00
097f66f33c
gui: add a GTK separator under the month/year label
2019-07-19 14:37:51 +10:00
357f25deb4
gui: pack the toolbox at the start so it doesn't expand
...
If one drawing in the line gets rotated, the buttons all scaled to filll the
space - which is ugly.
2019-07-19 14:37:51 +10:00
6b623132e5
gui: handle the now-normalized pressure range
...
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2019-07-19 14:37:51 +10:00
3c3163261f
wacom: normalize the pressure to the advertised [0, 0xffff] range
...
This requires adjusting the svg conversion in kete as well, afaict the 1000
range there was chosen because it's (almost) the midpoint of the Bamboo series
with 2048 pressure grades. So let's use half of 0x10000 instead, which is
approximately 0x8000 as the crow flies.
Fixes #142
2019-07-19 14:37:51 +10:00
8a76d4eae3
gui: some more styling of the drawings
2019-07-19 14:37:51 +10:00
e38c6a0d55
gui: drop the timestamp label for each drawing
...
Now that we group by month anyway, this isn't that useful anymore
2019-07-19 14:37:51 +10:00
c00580655e
gui: use a GdkPixbuf to scale into the desired size
2019-07-19 14:37:51 +10:00
66130b9b8b
gui: give the toolbox a name
2019-07-19 14:37:51 +10:00
68e533ec5f
gui: maximize the window on startup
...
We need screen estate to show the drawings, let's make use of it
2019-07-19 14:37:51 +10:00
5dddefe9d4
gui: make the drawings slightly off-white
...
Some randome color off the google colour picker that's supposed to look more
like a real paper color. This also means we set the general background white
now to give it a better contrast.
2019-07-19 14:37:51 +10:00
b7bf68326f
gui: group the list of drawings up by month
2019-07-19 10:59:20 +10:00
2547f6b26d
gui: space out the drawings a bit
2019-07-19 10:38:40 +10:00
c29da10918
gui: fix a grammar mistake
2019-07-18 20:26:28 +10:00
bad0bc87ab
Add a 'missing tablet' icon to be displayed instead of the spinner
...
On startup and before we connected to a tablet, let's display a missing tablet
icon. Taken from the tablet icon, combined with the X from one of the network
icons in the Adwaita theme.
Once we get a sync notification, we just hide that one and done.
2019-07-18 19:43:16 +10:00
6add140a1f
gitignore: don't ignore SVG files
...
We need to provide a few in for tuhigui, so let's not ignore them.
2019-07-18 19:39:55 +10:00
Peter Hutterer