da3bff0fd4
fix German translation, fucked up by tx pull
2015-06-20 21:11:33 +02:00
e6086d6f79
updated translations from transifex
2015-06-20 20:55:21 +02:00
2458e55865
Pebble: add encodeSimpleMessage() for encoding 1 byte messages to endpoints
2015-06-19 23:54:31 +02:00
7e1700250f
Pebble: add dev option to force latest notification protocol usage
...
When enabled it forces to use 3.x notifications on FW 3.x (2.x notifcations on FW 2.x)
When disabled 2.x notification on FW 2.x and 1.x notifications on FW 2.x are used (which is recommended)
This allows Pebble Time users to do further tests.
2015-06-19 12:34:33 +02:00
e562fa9870
Light sleep and deep sleep was mixed up. Corrected graphs again. #45
...
Use dashed limit lines, still not perfect.
2015-06-19 01:14:58 +02:00
f9e5ab5fc1
Some more refinements to sleep display ( #45 ):
...
- display the recorded level of deep sleep rather than a constant
(I hope this works for morpheuz, too!?)
- give light sleep a minimum value, because it's sometimes 0 for Mi Band
2015-06-19 00:20:38 +02:00
03fa05756e
As a test, draw limit lines for sleep/activity changes.
...
Unfortunately it looks like the labels for it don't get rendered ;-(
2015-06-18 23:41:54 +02:00
83079b0456
Stub for device notification changes
2015-06-18 23:07:22 +02:00
cb3be26349
Do something when we receive a CharacteristicChanged message
...
on the UUID_CHARACTERISTIC_BATTERY characteristic.
This is a first try at addressing #71
Please note that this will probably not work at this point, but it's
worth a try. To make it work probably we have to tell the device to
send updates, and we don't know how to do it.
2015-06-18 22:17:41 +02:00
ea43d76705
Bump version, update CHANGELOG.md and LICENSE.artwork
...
not yet ready for release
2015-06-18 21:51:06 +02:00
1801a679c5
Pebble: fix FW 3.x detection
2015-06-18 18:39:32 +02:00
c1769fb4b4
revamp icons
2015-06-17 23:44:53 +02:00
bffd7f332f
remove SleepChartActivityOld, as the new one is usable now ;)
2015-06-17 08:18:24 +02:00
a5ae7acc63
Improved sleep chart #45
...
- use just one data set, because multiple data sets is not supported
by MPAndroidChart (the way we need it)
Now there is hardly any space between the bars anymore
Also:
- allow scaling x and y axis independently via pinch gesture
- set fixed y max value (1.0) so that the display is stable and
independent of the actual available data
- (at least temporarily) display y labels
2015-06-17 07:03:50 +02:00
8709b95a95
Use a single data set instead of one per activity kind
...
The reason is that multiple data sets will always be grouped.
If we add null values to fix the grouping issue, we will still have
space between the bars.
2015-06-17 07:03:50 +02:00
a07aed62ad
Pebble: Experiment with 3.x compatible notifications
...
This will most probably not work, but please test if you can ;)
2015-06-16 23:15:51 +02:00
70c021e92c
SleepChartActivity: Make light sleep color brighter
2015-06-13 20:47:36 +02:00
73187431b2
Use old Sleep Monitor Activity for Pebble/Morpheuz
...
The new one does not look good with Morpheuz data yet (samples every 10 minutes)
2015-06-13 20:37:53 +02:00
d2f7169de4
Really, I see no reason to look up a string for a preference key in an xml file
...
If we have to use a key to lookup the string for the key, we can just use that key as the preference key.
2015-06-13 01:12:08 +02:00
cfedf4acde
Put log file option in a development option category, change order in Mi Band preference screen.
2015-06-13 00:58:23 +02:00
3a6e8789c1
Update German translation
...
Also remove a string that was not supposed to be translated.
It is a preference key. Maybe it should not be in strings.xml but in its own file.
2015-06-13 00:54:43 +02:00
56d314d054
Reformat code and optimize imports
2015-06-13 00:32:48 +02:00
ad4f708140
Send 2.x style notifications when on FW 3.x (on FW 2.x else use 1.x style notifications)
...
This could improve #24 . Unfortunally I cannot test it since I have no Pebble Time.
2015-06-13 00:26:55 +02:00
ac7e21be48
Remove the activity log debug file.
...
This partially reverts commit 8b268a676c
2015-06-12 22:30:14 +02:00
376f9c53a0
Fix crash on startup
...
Fixed a typo that was causing a force close on database creation.
2015-06-12 21:26:11 +02:00
75de3b21e1
Use colors that are easier on the eyes
...
Changed the colors of the Deep-/Light Sleep and Activity datasets.
* Deep sleep has been used as basic color,
* Light sleep is a color that is monochromatically analogous
* Activity is a color triadic to the basic one
2015-06-12 11:17:44 +02:00
8aef92026c
A new sleep chart based on MPAndroidChart 45
...
- supports zooming an panning
- displays labels for all x-values (= time of day)
- fix deep vs. light sleep constants
- increase activity data buffer size for Mi Band
2015-06-11 23:37:00 +02:00
9051e10aad
switch constants for deep sleep and light sleep to match native miband data
2015-06-11 23:00:59 +02:00
0fa87b9eed
update CHANGELOG.md and bump version to 0.4.0
...
Planned release is Sunday 14. June
2015-06-11 21:12:25 +02:00
dfcad94c2c
Pebble: Make firmware installation possible from recovery ( Closes #54 )
...
Also make HW revision displayable for Pebble Time.
2015-06-11 20:40:31 +02:00
d0b9914770
Keep the db open while adding samples
2015-06-09 21:05:44 +02:00
e78e79a9a9
Added missing returns..
2015-06-08 23:31:12 +02:00
efac912929
Pebble: Fix error when reinstalling apps, useful for upgrading/downgrading
...
Fixes #65
2015-06-08 22:38:58 +02:00
4f8a7ea64d
Misuse device_candidate_item insead of device_item for AppManager
2015-06-07 22:02:40 +02:00
c98716d469
Morpheuz support: Fix 3.1 compatibility
2015-06-07 21:49:05 +02:00
042963f2e2
Escape ' in Turkish translation to fix build
2015-06-07 21:31:47 +02:00
1c8173c218
Merge pull request #64 from mtsekm/master
...
Add Turkish translation
2015-06-07 20:59:00 +02:00
3d49426a4c
updated translations from transifex
2015-06-07 20:58:04 +02:00
56a0935d62
Add Turkish translation
2015-06-07 17:32:47 +03:00
ba76f64bf6
Disable context menu while busy and add "Disconnect" to context menu
2015-06-07 15:31:42 +02:00
dc8d1e961d
Fix position of progress bar
2015-06-07 00:05:36 +02:00
ab97b544f0
Some cleanup + actually remember event time and kind for throttling
2015-06-06 23:59:53 +02:00
f5a569610f
Wrap DeviceSupport instances.
...
The wrapper provides support for busy-checking and throttling
(sometimes I get multiple events of the same kind within milli seconds
and the Mi Band vibrates 20 times)
2015-06-06 23:54:34 +02:00
f6d5767276
Remove reference to PebbleIOThread from BluetoothCommunicationService
...
Let PebbleSupport do this instead.
2015-06-06 23:24:00 +02:00
3fe9195d0d
Avoid warning in unsetDynamicState()
2015-06-06 23:13:26 +02:00
020d8d74d6
Added "Fetch Activity Data" to the context menu.
...
With some kind of progress reporting during the fetching #45
2015-06-06 19:39:04 +02:00
9e4e50be47
Initial work on synchronizing activity data with feedback.
...
A device now has a busy flag (set during synchronization). While busy,
no other communication with the device shall occur (TODO)
Refactors the non-bluetooth actions a bit #45
Next step: make use of the busy state in ControlCenter (show
a busy cursor) and in BluetoothCommunicationService (to not call other
operations while busy)
2015-06-06 00:40:16 +02:00
2f0d00d645
avoid WITHOUT ROWID when not running at least lollipop #62
2015-06-06 00:10:38 +02:00
1e89b12b15
Avoid creating lots of SimpleDateFormat instances
2015-06-05 23:09:28 +02:00
dea4ee82a1
Merge branch 'db_refactoring_proposal'
2015-06-05 21:57:55 +02:00
c4096e6d3c
Add daniele's db optimization the WITHOUT ROWID
...
closes #62
2015-06-05 21:46:56 +02:00
b12a3e74cd
MorpheuzSupport: remove limit of 54 samples. Morpheuz 3.1 supports 60
2015-06-05 20:26:11 +02:00
baecc20742
SleepMonitorActivity: Rotate annotation text for better readability
2015-06-05 19:59:58 +02:00
813a02d5c7
Unify SleepMonitor with code from PR #59 . Thanks Daniele!
2015-06-05 19:32:09 +02:00
2f1908e480
Make sure to always close the database
2015-06-04 23:45:46 +02:00
fc374881c5
Get rid of the unused ID in the DB, this could help in:
...
* reducing the used space
* reducing the time needed for inserts
2015-06-04 21:37:48 +02:00
7ad38c5e1a
Merge pull request #61 from danielegobbetti/fix_data_in_the_future
...
Do not iterate over the whole buffer, but only on the effectively use…
2015-06-04 21:15:52 +02:00
a1ff9aab21
Do not iterate over the whole buffer, but only on the effectively used part.
...
This should fix the "data in the future" issue
2015-06-04 18:56:35 +02:00
7d86396e30
Support CM 12.1 Music App
2015-06-02 21:48:21 +02:00
406f9ab90d
Do not allocate the buffer if there's no data available.
...
Perhaps could fix the "data in the future" issue
2015-06-02 18:33:12 +02:00
9e2d32c33f
Fixed timestamp conversion for DB, added local variables to make the code clearer
2015-06-01 22:20:28 +02:00
ea97a902d1
*unchecked* Storing activity values in the DB.
2015-06-01 22:20:28 +02:00
8b268a676c
Refactoring of the data ingestion method.
...
* no more ByteBuffer, but a fixed size byte array that gets flushed everytime it's needed
* log of activity data to a separate file (no DB integration yet)
* the size of the buffer must be a multiple of 3 (1 minute of data = 3 bytes) and 20 (the normal size of the chunks we get from the device)
* better logging and more comments in code
2015-06-01 22:20:22 +02:00
5d950dc407
Fix reconnection after connection loss
...
Well, obviously we must not ignore connection state changes even if they
come with an error code.
Unfortunately the API docs are a bit terse in that respect.
2015-06-01 21:47:02 +02:00
7f89f4bb57
Some fixes regarding device initialization, should avoid disconnects
...
Avoid repeated initializations and device info requests. Fix unsetting
of dynamic state (e.g. battery info) when initialized.
2015-06-01 21:47:02 +02:00
f60903699e
Delete MiBandSupport.java.orig
...
I believe it was committed by mistake (perhaps a merge conflict?) It's out of date in any case.
2015-06-01 21:47:02 +02:00
11884d8073
Improve logging
2015-06-01 21:47:02 +02:00
75b9fe4c4d
ignore connection state changes with status != GATT_SUCCESS
...
And add logging. Maybe this helps with #57
2015-06-01 21:47:02 +02:00
228e922ce7
forgotten refactor of a variable
2015-06-01 21:47:01 +02:00
e4076dc725
Ingesting the activity data the right way, but they are still being thrown away afterwards.
2015-06-01 21:47:01 +02:00
92caed5af4
Some cleanup
2015-06-01 21:47:01 +02:00
a7792f6b72
improve some log statements
2015-06-01 21:47:01 +02:00
637b43e892
Also wait for descriptor reads and writes
...
(not just characteristic reads/writes)
This fixes initialization of notification characteristics
(activity, sensor data, battery, ...)
2015-06-01 21:47:01 +02:00
f004b7b11c
WIP for fetching activity data
...
This probably affects #44 and #45
Thanks go to Daniele Gobbetti <daniele@gobbetti.name>!
2015-06-01 21:47:01 +02:00
6ea9537d38
Start sleep activity with context menu (long press on a device)
...
This allows to see sleep data even if devices are not connected.
2015-06-01 16:57:45 +02:00
81b1d1d28d
Pebble: Put WeatherNeat test in separate file
2015-05-30 22:24:53 +02:00
603d31a59e
add some constants to GBActivitySample
2015-05-30 21:52:29 +02:00
41207516b1
Move BluetoothChangeReceiver to externalevents
2015-05-30 21:40:42 +02:00
900b3f3833
use ORDER BY timestamp in SQL statement
...
Also optimize imports...
2015-05-30 17:40:23 +02:00
e79f4523c3
Add SQLite database support for activity data
...
This is now used for morpheuz data and the SleepMonitorActivity
2015-05-30 17:28:03 +02:00
08fbbb9152
SleepMonitor: draw colored bars instead of a graph
...
red = awake
yellow = light sleep
greep = deep sleep
2015-05-27 00:59:05 +02:00
8366af736c
Pebble: Fix firmware installation when all 8 app slots are in use
...
We were trying to get a free slot when installing a firmware which is not neccessary.
This should also fix firmware installation in recovery (#54 )
2015-05-25 01:26:27 +02:00
6fb6b5c164
Merge pull request #55 from danielegobbetti/master
...
Use constants instead of hardcoded values
2015-05-24 23:16:52 +02:00
8a26ce9d67
Pull evaluateGBDeviceCommand() and handle* methods up
...
Otherwise, MiSupport can't use 'em
2015-05-23 00:54:14 +02:00
4518e8819d
Make file-logging configurable
2015-05-23 00:45:12 +02:00
c469248de1
Updated from transifex (thanks!)
2015-05-22 23:21:37 +02:00
880dc7b3a4
Improve BLE gatt handling
...
- close() the gatt instance when explicitly disconnecting
- create a new gatt instance when explicitly connecting
Unfortunately I still appear to get spontaneous disconnects after some
notifications.
2015-05-22 23:18:29 +02:00
f54927624b
Move non Pebble specific code from PebbleIoThread to AbstractBTDeviceSupport
2015-05-22 20:20:33 +02:00
8309234784
Pebble: fix wrong calculation of timestamp.
2015-05-21 18:57:34 +02:00
7e2545f9b4
Use constants instead of hardcoded values
2015-05-21 18:19:07 +02:00
68b76aa5c5
Pebble: Get Morpheuz sleep data visualize through SleepMonitorActivity
...
This very very experimental, and needs a complete overhaul.
But it is a start ;)
2015-05-21 18:17:39 +02:00
1c5d6de3ad
Pebble: fix App installation
2015-05-18 23:14:32 +02:00
50c7206cf6
Pebble: implement reboot
2015-05-18 22:40:39 +02:00
c4f7fc1531
Start App on Pebble when tapping it AppManager
2015-05-18 22:20:01 +02:00
c37cacf43d
Remove id and index from GBDeviceApp in favor of UUIDs
2015-05-18 20:56:19 +02:00
6fa2017dda
Logging: Compress package names and rotate log files
2015-05-17 23:37:28 +02:00
e3c42ace2d
Updated translations from transifex (thanks!)
2015-05-17 23:01:47 +02:00
d1d3e758d9
Support configurable notifications. Closes #53
...
To close #29 , we need to have a bit more configuration options than
just the number of vibrations. E.g.
- duration
- pause
- LED flashing (again, number of flashes, duration and pause, but also
the colour and maybe which LEDs)
Also implements reboot-functionality for Mi Band.
2015-05-17 22:57:37 +02:00
4be50b3a82
Fix typo
2015-05-17 22:57:26 +02:00
301c7622ef
Is in assets/ now, was not supposed to be committed here
2015-05-17 21:59:13 +02:00
14a05c3383
Initial support for rebooting the device
...
(via the Debug activity)
Attention: no safety-confirmation dialog yet!
2015-05-17 21:58:08 +02:00
9819819b92
Create the wait-latch before running the action, and only if neeeded
...
Otherwise the result handler might be called before the wait-latch
has been created, leading to a deadlock of the thread.
Also: only wait for read- and write actions, but not for wait-actions.
2015-05-17 21:55:02 +02:00
55400817b4
Pebble: experiment with extensible notifications
...
This allows lot more flexible notifications including custom actions (replys, etc)
When used without actions it could serve as a simple replacement for the current notifications.
The main showstopper is that I do not know how to assign icons (mail, chat) to these.
Unfortunately I ended up in recovery when playing around with unknown parameters trial&error style.
2015-05-15 21:34:38 +02:00
2b98620ee0
Mi Band: Prepare preferences for vibration count, use number as input type for numeric field
2015-05-14 13:04:21 +02:00
562840a7c5
Actually call the new generic notification handler
2015-05-14 00:04:54 +02:00
80eb386dd8
fix DebugActivity, was broken since we translated it :/
2015-05-13 23:21:49 +02:00
d2bcccaeef
Use logback-android for logging to external storage
...
(no WRITE_EXTERNAL_STORAGE permission necessary!)
2015-05-13 23:15:20 +02:00
27d725853f
Add extra handler for generic notifications
...
(instead of misusing onSMS handler). Pebble still does that,
but not everybody has to.
Small step for #53
2015-05-13 21:55:22 +02:00
c81e28c030
simplify code
2015-05-12 20:32:34 +02:00
1b2f20160a
fix some lint warnings, mostly simplifications
2015-05-12 20:09:35 +02:00
f8341918ee
compile fix
2015-05-12 11:12:53 +02:00
7540a3955b
Pebble: experiment with launching watchapps from Gadgetbridge
2015-05-12 11:06:22 +02:00
68383b6c05
Updated translations from transifex (thanks!)
2015-05-12 06:34:44 +02:00
9a26769c3e
Search & replace: use slf4j for logging instead of Logcat directly
...
For a start, use android-logger as backend. Needs a better configuration
but no time right now.
For file-logging we will use logback as slf4j-implementation.
2015-05-12 06:33:37 +02:00
6fab01a3c2
Pebble: experimenting with more generic application message encoding
2015-05-11 23:30:38 +02:00
87512149a5
This should fix pebble-pairing on bt+btle devices #33
2015-05-11 00:50:18 +02:00
9195652f11
Reformatted from transifex
2015-05-10 23:59:00 +02:00
84d1e95767
Fix removal of async runnable to stop pairing after 60s ( #3 )
2015-05-10 23:14:32 +02:00
b25da80656
Stop discovery when attempting to pair #33
2015-05-10 21:35:31 +02:00
095ada8e5d
Attempt to improve Pebble bonding when bonding fails #33
2015-05-10 21:32:41 +02:00
be52724fdd
Also commit leftover
2015-05-10 21:19:24 +02:00
c89bba0cba
Remove explicit "Refresh" device list action
2015-05-10 21:19:07 +02:00
61e8d88de4
Rename constant
2015-05-10 21:13:05 +02:00
bd2d5fd608
Ensure that device list is refreshed when changing MAC address
...
(the set-summary preference change listener overwrote our own
listener)
2015-05-10 21:12:10 +02:00
2b84ffdc1a
update Russian translation
2015-05-10 19:07:48 +02:00
b1cb5f3f21
update CHANGELOG, README and bump version to 0.3.5
...
We might delay the release a bit due to missing translations.
2015-05-10 17:09:57 +02:00
c8feea9f37
Refreshing device list when paired devices change now works.
...
I was using LocalBroadcastManager.... :/
2015-05-10 17:05:24 +02:00
0d77a5ac05
Try to refresh device list if BluetoothDevice.ACTION_BOND_STATE_CHANGED is received.
...
On my Android 4.4 device, this does not work however (no Intents arrive)
2015-05-10 16:56:09 +02:00
f101926186
Pebble: No pairing activity, just call createBond() and finish discovery activity
2015-05-10 16:27:31 +02:00
a70426d84d
Display found Pebbles in DiscoveryActivity
2015-05-10 15:52:19 +02:00
1443c8088c
Change default for Pebble Notification Intents back to "when screen off"
...
Conversations accepted our PR, so we will continue to get these intents.
The option cann still turned off, in that case Conversations' notifications are
picked up by our generic notification support.
2015-05-10 15:07:28 +02:00
22daa507ce
readd Italian string that was removed by accident (or by transifex)
2015-05-10 14:22:44 +02:00
7f5b495480
Move Mi Band MAC address setting to Mi Band Settings
2015-05-10 13:08:28 +02:00
e78c912be3
Only sync time on time/timezone changes if appropriate option is set.
2015-05-10 11:21:16 +02:00
f9efa36322
Add Russian translation (thanks astra1!)
2015-05-10 10:02:12 +02:00
fa9bed81ce
Updated translations
2015-05-10 00:21:08 +02:00
86119a877a
Slight refactoring, add some Logging
2015-05-10 00:18:42 +02:00
39d84831ed
Unset dynamic device state (like battery level, etc.) when disconnected
2015-05-10 00:05:29 +02:00
1a7c3c42e4
Do both BT and BTLE discovery (one after another) #33
2015-05-09 23:54:47 +02:00
60210e069c
Fix validity check with gender and type
2015-05-09 23:13:47 +02:00
29cc364f8a
Updated translations
2015-05-09 21:47:03 +02:00
ab5d5f6c6f
Made Mi Band preferences localizable
2015-05-09 21:43:04 +02:00
8112d4afd8
update stings
2015-05-08 12:56:17 +02:00
6f162c593b
Pebble message intent notifications default to "never" now
...
If these get turned on, Conversations notifications will be handled through Pebble message intents and get filtered out from generic notifcation handling.
2015-05-08 12:50:42 +02:00
c999c52501
convert sequence of ifs to switch
2015-05-08 11:18:06 +02:00
ddc2f116aa
Updated German translation
2015-05-08 00:48:51 +02:00
d036f0539d
Added missing resource strings and clean up layouts
2015-05-08 00:42:46 +02:00
9801a94704
Revert "Updated translation from transifex"
...
This reverts commit 45fde87df6
2015-05-07 23:56:04 +02:00
45fde87df6
Updated translation from transifex
2015-05-07 23:54:59 +02:00
b2518ff927
Discovery + pairing now works
...
User info is asked on demand before starting the actual pairing.
When no (valid) user info is given, dummy user infor will be used instead.
2015-05-07 23:52:44 +02:00
157deff237
Send current time to device if time/timezone changes. Closes #51 .
2015-05-07 23:46:18 +02:00
70889e5326
fix italian string, which would cause FC
2015-05-07 22:32:30 +02:00
1604ae2c22
#33 only start discovery activity when bt is enabled
2015-05-07 22:15:53 +02:00
cf360455a0
updated translations from transifex
2015-05-07 22:05:57 +02:00
84a89c7c9b
ignore values-en, always created by tx pull -a
2015-05-07 20:46:24 +02:00
a23690c8e1
Initial support for Mi Band specific settings
...
(User info for now).
TODO: We need to have that information *before* starting a connect
2015-05-07 01:32:17 +02:00
44333c4244
Fix some German strings, simplify SMS/K9-Mail strings
2015-05-07 00:11:43 +02:00
8b75440867
Pebble: feed WeatherNeat with bogus data (testing)
...
This is completely useless, but it is the first time I could successfully send
data to a watchface.
2015-05-06 23:47:58 +02:00
fa57bf11a2
Fix some German translations
2015-05-06 23:16:15 +02:00
637cc3be51
Connected devices are typically not discoverable ( #33 )
2015-05-06 23:00:06 +02:00
0c039b8a46
Start discovery activity automatically when no devices available ( #33 )
2015-05-06 22:59:31 +02:00
0629d6aa5d
Small improvements to discovery, only scan for 1min #33
2015-05-06 22:59:00 +02:00
dbffd5a42f
Updated translations from transifex ( #46 )
...
Needed to use pull -a to get new languages (here: italian)
2015-05-06 17:39:46 +02:00
33db0bf890
Pebble: handle DATALOG and PHONEVERSION endpoints directly in protocol
...
This allows to remove all protocol inspection in PebbleIoThread
2015-05-06 11:43:01 +02:00
7b02548427
Clear task stack after discovery ( #33 )
2015-05-06 00:17:28 +02:00
dc6fd8cb61
Translation updated from Transifex
2015-05-05 23:39:47 +02:00
50034e0bfe
Request battery info in initialize()
2015-05-05 23:25:54 +02:00
3e85efa898
Display battery level if known. Should work on Miband, untested.
2015-05-05 22:52:25 +02:00
9efcd8974d
Add GBDeviceCommandSendBytes for generic pre encoded commands that are meant to be send to a device directly
...
This is useful for Debugging. We can now send answers to data from the Device directly
int he procol implementation without messing with code in the GBDEviceIoThread's implementation.
This commit also adds test code for interaction with WeatherNeat (so far nothing works though)
2015-05-05 14:41:10 +02:00
d09b5442cf
Put FW/HW info inside its own TextView to cleanup the device list
2015-05-05 11:16:57 +02:00
cf12c78a64
Ensure that discovery doesn't display duplicates ( #33 )
2015-05-05 01:08:30 +02:00
9df661bd96
Initial (ugly) support for device discovery and pairing ( #3 )
2015-05-05 00:48:54 +02:00
e859ece7c6
Add Support for notifications send to Pebble from 3rd party applications
...
This enables support for Conversations without using generic notificaion support.
Other applications could also work partly but are untested.
This commit also changes the SettingsActivity to use Comboboxes instead of two
Checkboxes for each notification source.
2015-05-04 01:03:56 +02:00
6d1a4312ef
remove unused ApplicationTest
2015-05-03 19:19:05 +02:00
cac3bc01a9
Update strings.xml
2015-05-01 17:20:17 +02:00
93b463c47e
update German translation
2015-05-01 10:08:24 +02:00
3e79269d43
#46 add missing GBApplication
2015-05-01 09:36:33 +02:00
f143c9ec54
androidstudio vs. eclipse :/
2015-05-01 01:49:43 +02:00
8b3b4d0882
#46 make all strings localizable
2015-05-01 01:26:30 +02:00
75b9d0e833
simplyfy SettingsActiviy code
2015-05-01 00:56:16 +02:00
b256c9ed15
set utf-8
2015-04-30 00:58:04 +02:00
959626049e
add Spanish translation (thanks xphnx!)
2015-04-30 00:57:36 +02:00
f8bbbdb47c
add Korean translation (thanks halcyonera!)
2015-04-30 00:54:32 +02:00
b7c3578e5b
add German translation (quick & dirty)
2015-04-30 00:50:16 +02:00
93cc35bda5
prepare for release
2015-04-29 00:23:00 +02:00
e65c492792
Pebble: display progressbar during installation of apps/firmware
2015-04-29 00:21:02 +02:00
01e96f9c8d
Pebble: Bugfix for beeing stuck while waiting for a slot, when none is available
2015-04-28 23:35:12 +02:00
31b01d860f
Pebble: notification cleanups
...
- remove notification update code from PebbleIoThread (is in generic code now)
- use a separate notification for app/firmware installation
2015-04-28 21:59:53 +02:00
5a458611e2
Set the time during initialization. Necessary for steps tracking.
...
Also see #31
2015-04-27 21:43:57 +02:00
8e25c03350
display connection state in notification area
2015-04-27 21:19:09 +02:00
462f9f028f
Pebble: do not call setReceiversEnableState() from PebbleIoThread anymore, handling had been moved to generic code
2015-04-27 01:24:42 +02:00
2eb62ebff3
Pebble: Speed up app/firmware installation by sending 2000 bytes at once instead of 512. Closes #22 .
2015-04-27 01:15:03 +02:00
c94108f2d1
bump version to 0.3.3
2015-04-26 10:15:55 +02:00
c06ef3d260
Pebble: try to shut up datalog, which might cause battery drain on the watch
2015-04-26 01:43:24 +02:00
613ff1fc91
Pebble: corrections to PebbleIoThreads, better logging
2015-04-26 00:54:41 +02:00
0377a751b0
be even more robust #35
2015-04-25 23:49:07 +02:00
1772076b62
Log service creation and destruction
2015-04-25 23:49:07 +02:00
442ae6499a
Pebble: Better logging and hexdump for short packages to endpoint 6778
2015-04-25 23:13:22 +02:00
c773181da3
Request and display device info (connection state and firmware version)
...
- request device info initially (connection state)
- request device info (firmware) when connected
This also fixes the wrong connection state being displayed on
orientation change.
2015-04-24 23:09:35 +02:00
274e8591dc
Initialize the BTLE device after the services are discovered.
...
This hopefully helps with the MI Band automatically disconnecting.
2015-04-24 22:21:35 +02:00
98696ce9e2
Implement setting the time on the miband.
...
It works from the debug activity, since I am not sure about the value of
the ts argument, it always sets the current time.
2015-04-23 14:11:57 +02:00
cf681a089a
Add the device if it's not in the list yet.
2015-04-22 20:38:05 +02:00
1ff1c20056
Some more logging
2015-04-22 20:38:04 +02:00
ab2f5a73a8
Quick fix for crash when connecting to a Miband with invalid address in settings.
2015-04-21 22:35:11 +02:00
e1a31ee92c
bump version to 0.3.2
2015-04-20 23:55:34 +02:00
06d8488792
#15 log as info, not error
2015-04-20 23:45:34 +02:00
b391128a56
Merge branch 'master' of https://github.com/Freeyourgadget/Gadgetbridge
2015-04-20 23:39:02 +02:00
661ed9c612
Pebble: When opening a firmware print for which HW revision it is.
2015-04-20 23:38:00 +02:00
1e3ba57b03
fix unpaired MI devices disappearing from view ( #15 )
2015-04-20 23:25:46 +02:00
f6208f1031
fix warning
2015-04-20 22:44:22 +02:00
33d86de923
move external receivers to externalevents/ directory
2015-04-20 22:39:35 +02:00
93b18d0d0b
log when receivers are enabled/disabled
2015-04-20 22:04:14 +02:00
515c456605
#15 keep the broadcast receivers enabled when device uses autoconnect
2015-04-20 22:02:06 +02:00
4bdeabf4ea
set deviceSupport to null after disposing it
2015-04-20 21:45:52 +02:00
5487dfd348
Pebble app installation: Only enable install button when device is connected, for firmware also check hardware revision
2015-04-20 20:49:14 +02:00
412c771d59
fix crash
2015-04-20 20:48:52 +02:00
a12a76313c
do not append Miband to device list if it has already been added as the connected device before
2015-04-20 19:32:12 +02:00
16ea52e83c
add hardware revision string to GBDevice, get and display HW Revision from Pebble
2015-04-20 12:48:32 +02:00
fbbc808ca8
Make GBDevice parcable to make passing it via Intents more convinient
2015-04-20 11:58:59 +02:00
cd0139cd7c
add isConnecting() method to GBDevice
2015-04-20 10:50:30 +02:00
4a1a1d59be
battery info hooked in, dummy for pebble
2015-04-19 22:31:09 +02:00
686ed312d6
#15 properly return firmware version
2015-04-19 22:23:53 +02:00
2dcd95a1f5
#15 support for reading firmware version and battery info
2015-04-19 22:20:47 +02:00
28272714aa
remove whitespace
2015-04-19 21:50:01 +02:00
54784100b8
use isConnected() rather than getState() == CONNECTED
...
because getState() == INITIALIZED implies CONNECTED
2015-04-19 15:56:32 +02:00
40c76fcabf
bump version to 0.3.1 , update CHANGELOG.md
2015-04-19 15:37:37 +02:00
95d656d345
reformat code with androidstudio :P
2015-04-19 15:27:16 +02:00
7b433f0d18
add state string for INITIALIZED
2015-04-19 15:21:15 +02:00
2b1157ca67
#15 : notify on incoming calls
2015-04-19 15:15:53 +02:00
24c3903eef
#15 update device state to INITIALIZED when user info was sent
2015-04-19 15:11:50 +02:00
0e34a449ca
Register with the LocalBroadcastManager for device_changed
...
Otherwise intents sent with LocalBroadcastManager won't ever arrive.
2015-04-19 15:11:03 +02:00
7b4c7926d3
Listen to device_changed in addition to refresh_device_list
2015-04-19 15:09:27 +02:00
88e2b7ff99
#15 automatically toggle the broadcast receiver using connectoin status
...
Makes "real" notifications where for the MI Band, not just those from
the debug activity.
2015-04-19 14:35:28 +02:00
b74319fee9
Make list refresh automatically when Miband MAC was entered or removed. Update README.md
2015-04-19 12:35:23 +02:00
ee0b92ac44
bump version to 0.3.0, update README.md and CHANGELOG.md
2015-04-19 11:34:26 +02:00
dd12bb11b2
reformat code with androidstudio
2015-04-19 11:28:03 +02:00
09914e6da0
#15 Initial support for MI Band
...
1) The MAC address has to be added manually for now (Settings -> Debug)
2) Configure other notifications as desired
3) After doing that, restart Gadgetbridge, after that, the device should
be visible.
4) Tap it to connect
5) Try the Debug activity via the Menu to send some dummy notifications
=> Your MI should vibrate and blink
Also: add some extra files necessary to support Eclipse ADT. To be
migrated to Andmore, later.
2015-04-19 02:37:29 +02:00
7c60e4b595
Pebble: Firmware upgrade support
2015-04-17 12:23:19 +02:00
90f2b4ded3
Pebble app installation: Use data (filenames, sizes and crc) from manifest.json ( Fixes #16 )
...
Also remove STM32CRC.java, which had broken tail code, we use the crc from the manifest now.
2015-04-17 00:57:50 +02:00
47fd1a7dff
move PebbleProtocol.java, update CHANGELOG.md
2015-04-15 00:06:42 +02:00
7ad1bfbdb1
reformat code with androidstudio
2015-04-14 10:29:09 +02:00
dbb0d85165
Added missing dispose() method
2015-04-14 02:04:59 +02:00
d0ff14bc0e
Also move the resource management into DeviceSupport classes
2015-04-14 02:04:58 +02:00
1f31c1d79c
Next refactoring: the road to support BT and BT LE
2015-04-14 02:04:34 +02:00
0cec658c3a
Implement volume control for Pebble
...
I didn't know how to access this on the pebble until I did a long press on
play/pause ;)
2015-04-13 22:25:23 +02:00
40438ebe0e
Revert to previous state if connection fails, this fixes multiple bugs when pebble is reconnecting
2015-04-13 13:26:22 +02:00
bb44cb1e19
reformat code with androidstudio
2015-04-13 11:22:03 +02:00
62a41ac5be
Fix manual input of bluetooth MAC address
...
(must be uppercase characters)
2015-04-13 01:07:46 +02:00
09bb5d4a3e
Refactoring: extracted inner GBDeviceIOThread classes to own files
...
To enable this, extracted some shared functionality into new GB helper
class.
2015-04-13 01:02:26 +02:00
b3c036ef3b
add missing files
2015-04-11 01:08:02 +02:00
4a697edced
add icon for activity tracker type apps. Thanks xphnx!
2015-04-10 22:26:52 +02:00
521dad8c14
Mention the original cpp source from which STM32CRC.java was ported.
2015-04-10 22:10:55 +02:00
4ff57dfdab
Feedback for failed and successful installations. Closes #19 .
2015-04-09 18:48:52 +02:00
3355be79e6
Filter notifications from com.android.systemui. Should fix #20 .
2015-04-08 22:11:56 +02:00
9eea17d5f5
update README.md and CHANGELOG.md, bump version (not yet release time)
2015-04-08 00:28:43 +02:00
90fe75e044
get free slot always before actually installing a pbw. fixes #17 and #18
2015-04-07 23:57:12 +02:00
ebdf514c0e
Pebble app installation: first successful installation :)
...
KNOWN PROBLEMS
- expected filenames inside pbw files are hardcoded (pebble-app.bin etc)
- long delay before installation starts
- must be in app mananger at least once before installation in possible
- errors while installing are not always recognized
2015-04-07 19:33:23 +02:00
3498ddfc7a
Pebble: progress with app installtion (CRC, complete install of pebble-app.bin)
...
This is still not working and WIP.
TODO:
- install resources
- install workers
2015-04-06 23:37:17 +02:00
2c1cacedb3
Pebble: working on app installation (WIP, do not use)
2015-04-06 20:58:35 +02:00
1766c82ab8
In NotificationListener return early if BluetoothCommunicationService is not running
...
This is to pervent our service from being started when we get a notification
even if Gadgetbridge is not in use and no devices are connected.
Unfortunately we cannot enable/disable NotificationListener at runtime like we
do with broadcast receivers because it seems to invalidate the permissions that
are neccessery for NotificationListenerService
2015-04-04 23:20:28 +02:00
74f2b8c1c2
fix crash on some devices when creating a test notification in debug menu
2015-04-03 22:39:25 +02:00
45631fb14b
workaround for missing Miband pairing (assume Miband when device name is not set)
2015-04-01 23:15:08 +02:00
13d734b0f1
add development option to set a miband device address so it appears in our list.
...
This is only meant for future development, there is no MI Band support yet!
2015-04-01 23:00:05 +02:00
2c50f95a92
update Pebble icon, add Miband icon
2015-04-01 22:12:49 +02:00
71c201beaf
add GBDeviceIoThread class for further device abstraction
...
Also add an empty implementation for the Miband.
Now Gadgedbridges pebbleisms should be removed.
2015-04-01 19:11:18 +02:00
ed2e177fcb
Remove direct PebbleProtocol usage. Add GBDeviceProtocol as a base class for all protocols.
...
Also add a empty MibandProtocol
2015-04-01 18:34:52 +02:00
9d74cee093
add icons for pebble and watchfaces. Store app type in GBDeviceApp. Store device type in GBDevice.
2015-03-31 23:34:19 +02:00
2b31d4b359
fix refresh of device list when bluetooth gets turned on
2015-03-29 23:43:05 +02:00
f2d0765fec
bump version
2015-03-29 17:12:45 +02:00
d9a2d85f6d
Fix for DST (summer time), option to sync time on connect (enabled by default)
2015-03-29 17:12:06 +02:00
4117444c26
Display app name, company and version when opening a .pbw file from a filemanager
2015-03-28 23:23:10 +01:00
d4ff94da4a
Back button for SettingsAvtivity. Remove tablet specific code.
2015-03-28 20:39:46 +01:00
b3251a33f2
show hint at the bottom of the Main Activity, update README.md, bump to 0.1.4
2015-03-27 12:33:51 +01:00
0dacc1f9c7
make sure Intent broadcasts do not leave Gadgetbridge, add missing xml file
2015-03-27 12:13:19 +01:00
b20aaf59a8
enable back navigaton in AppManager and Debug activitys ActionBar
2015-03-27 11:23:30 +01:00
6ec1fa9e23
use LocalBroadcastManager
2015-03-27 10:56:08 +01:00
42e53c3c8d
support removing apps/watchfaces
2015-03-26 18:11:47 +01:00
67a5917597
Change the way how device commands or replys to information requests are passed back to the App
...
This was necessary to pack more complex and more specific information regarding apps etc.
2015-03-26 12:06:26 +01:00
0ccb818f58
Added AppManager, does not do anything useful yet. Only lists installed Apps.
2015-03-25 22:23:45 +01:00
2e7f45433a
display connection status in the device list
2015-03-22 23:38:51 +01:00
ecb7a9f3b5
Remove quit button from the service notification, put a quit item in the context menu instead. Closes #12
2015-03-22 13:10:45 +01:00
79c7085264
refresh list of paried devices when bluetooth gets turned on
2015-03-22 12:46:28 +01:00
05c07aa611
Get and display Pebble firmware version when connected.
2015-03-22 00:34:54 +01:00
4e465928e6
List all suported devices and connect on tap. Remove the connect button.
2015-03-21 18:18:07 +01:00
f9166735ad
bump version, update README.md and CHANGELOG.md
2015-03-18 12:31:33 +01:00
a746ed4a2b
reconnect support. Closes #10
2015-03-18 12:29:10 +01:00
d1ea1b9915
quit Gadgetbridge when bluetooth gets turned off
2015-03-17 22:03:54 +01:00
a971eca6fd
preparations for acceppting calls
2015-03-17 21:42:31 +01:00
c56194c0e5
* Add option to start Gadgetbridge and connect automatically when bluetooth is turned on.
...
This closes #9
2015-03-17 21:41:58 +01:00
d6e5f0a9f8
bump version to 0.1.1
2015-03-16 19:26:46 +01:00
2260d60bac
K-9 Mail notifications: Hopefully fix #7 and #8
...
K-9 Mail seems to completely ignore the where clause when querying for messages.
That is why we got data from the newest message instead of the one requested.
Work around by walking through the messages and match the uri manually.
This is not as expensive as I thought because in most cases it is the first
message is the one we want anyway.
2015-03-16 16:18:11 +01:00
eeb74b4c61
Preferences: "Generic Notification Support" is no longer a checkbox - it now opens the Android Notificaion Permission Dialog
...
If the permission is not granted we wont get notfifications, an extra preference for
Gadgetbridge is pointless, so I removed it.
2015-03-15 21:36:39 +01:00
3e4922a4eb
revert some useless changes in gradle files
2015-03-11 21:46:01 +01:00
326e079068
fix crash when no Pebble was paired, change version to 0.1.0, build tweaks
2015-03-11 12:40:59 +01:00
6fa99082ab
Support for rejecting/ending calls via Pebble buttons
2015-03-07 17:44:39 +01:00
85ccafc922
Experiment with styling.
2015-03-07 15:32:34 +01:00
4e7553836b
Workaround for non-working outgoing call display. Fixes #6 .
...
This is still a bit ugly because we cannot (yet?) detect whether remote has
taken the call or not. So we will start counting in-call time from the moment
we start dialling.
2015-03-07 14:40:59 +01:00
e52e26168a
quick&dirty preference screen. Allows to enable/disable SMS/K9/generic notifications
2015-03-06 14:00:56 +01:00
bc40f41eab
Do not send notifications out notification when screen is on. Also filter out "ongoing" notifications
2015-03-04 23:47:47 +01:00
e0c146bde9
add notification icon. This fixes #2
2015-02-24 12:36:38 +01:00
df8c290442
Implement music control (play, pause, next, previous). Try to make code a bit less Pebble centric.
2015-02-12 16:00:45 +01:00
20b3dffba6
initial support for music playback information (artist, album, track), fix encoding of empty strings in PebbleProtocol
2015-02-08 23:53:40 +01:00
efa7920b9d
do not disable/enable NotificationListener at runtime (leads to loss of permissions to read notifications)
2015-02-07 13:20:38 +01:00
a47ba3c96f
Cleanup main Activity, move debug code to DebugActivity, added Call related debug buttons, add state tracking to PhoneCallReceiver, support in-call display of incoming calls (untested)
2015-02-07 12:58:18 +01:00
d80e98d26a
fix encoding of pebble version command, stops pebble from rerequsting our version over and over
2015-02-06 23:28:24 +01:00
2793669e88
New icon
2015-02-06 14:28:57 +01:00
243b9f0a88
Various changes to Service, Activity and Notification handling
...
- Bluetooth connection is now established in BtSocketIOThread
- Service is now started as soon as the main activity is started
- changed "start service" button to "connect" button
- quit button in service notification now also quits the main activity
- Service notification now displays "Gadgetbride started",
"connected to Pebble XXXXX" and "not connected" depending on connection state
2015-02-06 13:55:44 +01:00
ab233279e1
enable/disable BroadcastReceivers via PackageManager when Socket is connected/disconnected
...
This does not work with NotificationListener unfortunately.
2015-02-02 21:16:42 +01:00
24c9b5b400
quit BtSocketIoThred when socket has been closed by remote, remove dead "passive mode" code
2015-02-01 00:34:12 +01:00
c0bfe2f715
make quit button work by letting BtSocketIoThread actually leave its main loop, do not display "Unknown" for unknown numbers but the number itself.
2015-01-31 11:49:46 +01:00
8e69723931
Added quit button to Service notification, removed unneccessary ACTION_STOP form Service
2015-01-30 11:59:36 +01:00
ebf4c73e02
Added (ugly) icons.
...
But having ugly icons is better than having default icons....
2015-01-29 00:37:54 +01:00
2880e4dac9
Native support for K-9 Mail, bugfixes for generic notifications
2015-01-26 18:52:19 +01:00
94c73ef20e
Receive SMS the proper way, filter them out in the generic NotificationListener.
2015-01-24 12:21:15 +01:00
070c6db5ed
Resolve caller names by phone number before sending to Pebble
2015-01-23 11:32:58 +01:00
bf6abe9672
Quick and dirty support for incoming calls notification the Pebble way
...
Incoming calls are no longer send as simple notifications but properly as
incoming calls. The Pebble will vibrate until the call is taken or dismissed.
It is not yet possible to dismiss the call using the Pebble button.
2015-01-22 22:49:50 +01:00
59c281c61c
Reply to Pebbles version requests
2015-01-20 23:51:55 +01:00
fcaf099e70
fix various annoyances
...
- only ask for notication monitoring permissions the on first start
- filter out annoying system messages like keyboard notifications
- rearrange buttons
- bugfix for message being ignored when sending a test message to the
Pebble (sender was used as message content)
2015-01-18 22:44:38 +01:00
88bb645834
Add ACTION_SETTIME to Service and add a corresponding button in the ControlCenter activity
2015-01-18 01:10:44 +01:00
85fcdb208a
Put Bluetooth communication into a foreground service and keep socket open.
2015-01-12 00:35:15 +01:00
cc2b224a71
Do dot reuse BluetoothDevice, remember BT address instead and lookup the corresponding BluetoothDevice every time
...
This fixes problems after sleep with bluez on Android.
2015-01-09 13:45:47 +01:00
dada70e92c
First checkin of actual code
2015-01-07 14:00:18 +01:00
Andreas Shimokawa