91f374edec
Revert ""duration" parameter in onSetMusicInfo uses microseconds"
...
The decision on granularity of APIs is up to the maintainers.
This reverts commit 204748c518
2016-06-09 20:02:55 +02:00
204748c518
"duration" parameter in onSetMusicInfo uses microseconds
...
This is in line with Android, and saves some calculations (and thereby a
tiny little bit of battery life).
2016-06-08 20:43:46 +02:00
fb71cdf55b
Add handling for media session notifications
...
Since Android 5.0, media players can have interactive notifications that
reside in the notification area, and offer up to 5 control buttons
(play/pause, next, previous, etc), and information about the currentlu
playing media file.
We use these notifications to get information about the currently
playing media file such as:
- artist
- track (title)
- album
- duration (length of the media file)
- play state (playing, paused, stopped)
- position
- play rate (how fast is the media file being played)
We then send this information up to the device.
On Pebble, the music app will display the title and the artist, as
well as a progress bar showing the current position. The progress bar is
animated when the media file is being played, and if it is being paused,
it displays a pause symbol.
This code will be skipped when GadgetBridge is run on a device with
Android version older than 5.0 (lollipop).
2016-06-08 20:41:43 +02:00
73fbaf0a54
Restore previous working of the debug activity
...
The previous commits broke the debug activity's setting of the music
info. This commit restores this functionality.
2016-06-08 20:32:34 +02:00
e386d6da43
Add onSetMusicState(MusicStateSpec stateSpec)
...
This commit contains the infrastructure needed for the
NotificationHandler to send music state information to the device. That
is, it introduces a call onSetMusicState(MusicStateSpec stateSpec), that
in turn sets up an intent to the service, which will then call the
encodeSetMusicState() function of the device. encodeSetMusicState is
available for pebble only. There are empty stubs for other devices.
2016-06-08 20:31:48 +02:00
1d5c8bae9d
MusicStateSpec: introduce new class describing the music state
...
Contains:
- state
- position
- playRate
- shuffle
- repeat
This is close to what PebbleProtocol currently supports.
2016-06-08 20:22:56 +02:00
0470731e4b
PebbleProtocol: Do not call encodeSetMusicState in encodeSetMusicInfo
...
encodeSetMusicState will be accessible on its own. If it was used to set
the music state, a call to encodeSetMusicInfo must not reset this info
arbitrarily.
2016-06-08 20:16:33 +02:00
32429df7bc
Pebble: allow to enable or disable sync for each activity tracker in settings
...
This is useful if you have multiple phones and do not want to have your data synced to one of them
2016-06-07 22:51:14 +02:00
389a143bdb
Set music info for PocketCasts
...
PocketCasts tells about its current media state via notifications. This
patch tries to parse incoming notifications from PocketCasts and if
successful tells the device about it. Currently supported are track and
artist.
2016-06-07 19:34:37 +02:00
ae548d0806
WIP: more work, compile again
2016-06-06 23:18:46 +02:00
3b87966fe9
Merge branch 'master' into db-refactoring
2016-06-06 22:16:40 +02:00
2b6ee41970
Add logging of heartrate values #318
2016-06-05 22:37:42 +02:00
ca26e27c60
Basic support for Mi Band 2 #323 , untested
2016-06-05 22:31:07 +02:00
1ed0dc59b2
Merge pull request #321 from pragmaware/mi-band-device-time-offset
...
Add support for shifting the device time by N hours
2016-06-05 22:29:44 +02:00
0fb664c141
allow to switch languages at runtime
2016-06-05 14:33:09 +02:00
9d3f3c57cd
Pebble: make disabling of appmessage handlers more generic
...
Also disable morpheuz handler if morpheuz is not the chosen activity tracker
.... and bump reported version to 3.12 to match the latest pebble release
2016-06-04 21:50:26 +02:00
321707af8f
Pebble: ignore incoming misfit data if misfit is not set as the preferred activty tracker
2016-06-04 21:33:38 +02:00
968d15c8d8
Keep the pebble health data on the pebble watch if the activity provider is not pebble Health.
...
This will nack all pebble health datalog messages. As mentioned in #322 , this would allow to use multiple android device without secondary devices "sipping" the health data from the watch.
2016-06-04 18:21:49 +02:00
60fc29cc4d
Add support for shifting the device time by N hours to allow for sleep data gathering of shift workers
2016-06-03 04:43:12 +02:00
df4ae49b72
update Japanese translation from transifex (thanks!)
2016-06-01 00:01:08 +02:00
2e6536555b
Fix previous commit (compile!)
2016-05-31 22:56:22 +02:00
9a106667d2
Setting the wear location appears to fail for amazfit #274
...
So as a test, disable that for amazfit. Let's see what happens
next.
2016-05-31 22:33:38 +02:00
19d7c03545
Pebble: get rid of log spamming when changing applications (unhandled message)
2016-05-31 14:18:45 +02:00
a9d74b52f8
update German übersetzung
2016-05-31 13:34:29 +02:00
1dd0965ae1
update Italian traduzione from transifex
2016-05-31 13:07:11 +02:00
9da050c51d
update changelog
2016-05-31 13:05:55 +02:00
a15d07858e
Sunset/Sunrise: always use UTC timezone for calendar operations
2016-05-31 13:03:15 +02:00
42acb8915a
Pass the integer keys to pebble, even if they are not within the known app keys. Requested in #251
2016-05-31 12:24:28 +02:00
0231e83ea3
try to fix duplicate/missing surise/sunset pins
2016-05-31 00:07:24 +02:00
b71597800a
Pebble: set device to reconnecting state when actively reconnecting
...
It makes it easier to watch connection attempts and the delay between them in control center.
2016-05-29 23:24:16 +02:00
f2cbee39f1
update changelog again
...
actually the last commit is responsible for the fix (even though it is not mentioned in the commit log)
2016-05-29 23:02:00 +02:00
33da6c2925
Pebble: make sure that "waiting for reconnect" state is set when initial connect fails
2016-05-29 22:58:25 +02:00
4533c80c95
make sure to only reconnect when device is in "waiting for reconnect state"
2016-05-29 21:44:43 +02:00
af14fb4f90
limit max charaters to longiute and latitude to 7
2016-05-29 21:40:56 +02:00
2e8d96e995
add option to enable sunrise/sunset on the timeline
...
Also fix a small type Aquire -> Acquire
2016-05-29 21:29:27 +02:00
c9aad271da
update translations from transifex (thanks!)
2016-05-29 20:53:25 +02:00
2b88720f83
fix xml changelog and add missing entry
2016-05-29 20:50:05 +02:00
a13cd9d951
update changelog, bump version to 0.10.0
...
reasons for the bump are
- new permissing
- first contact with the timeline, although is is not very useful
2016-05-29 20:47:16 +02:00
8970bbe044
display device address in info menu (IP:PORT / MAC)
2016-05-28 11:32:36 +02:00
2d49ce505a
Set state to "Waiting for reconnect" for BTLE devices
2016-05-26 23:48:05 +02:00
50b7a02ef2
One more attempt at fixing dynamic logging reconfiguration
...
- moved out of GBApplication to class Logging
- the main thing is: when start()ing the FileAppender again, it *must*
- be configured to be non-lazy, otherwise it won't open the stream ever again.
2016-05-26 23:46:21 +02:00
6e33c7364a
Remove some commented code
2016-05-26 22:21:58 +02:00
c360eb3392
This should fix some connection problems #274
...
Some APIs have become synchronous, it seems, e.g.
connectGatt() -> onConnectionStateChanged() -> discoverServices() -> onServicesDiscovered()
appears to happen synchronously. So connectGatt() will not return before services are discovered!
So now we deal with this situation.
2016-05-26 19:03:38 +02:00
b0e0aec465
fix typo
2016-05-26 15:20:27 +02:00
88f338b0b9
Reenable our discovery activity for Android 6
...
Now that we request location we are allowed to do a btle scan again
2016-05-26 14:58:36 +02:00
7ef005f6a3
Allow getting the network location within pebble settings for sunrise/sunset calculation
...
It is also possible to set the location manually
On Android >=6 the required permission will be requested when pressing the button in settings.
2016-05-26 14:39:54 +02:00
fa6100fcec
Merge branch 'master' into feature-sunrise
2016-05-26 13:11:03 +02:00
31c15bb8b8
update changelog
2016-05-24 23:55:03 +02:00
bf66c25c7f
MusicPlayBackReceiver set track, artist and album to the artist member of MusicSpec.
...
Now the assignment of artist, track and album is correct
2016-05-24 19:33:12 +02:00
55a40f7b06
Sunset/sunrise: rotate ids and reuse the id from two days ago for tomorrow, this way we will have sunrise/sunset for 3 days while sending only sunrise/sunset per day
2016-05-24 14:46:22 +02:00
e3bee37b81
Change UUID prefix to 0x4767744272646700
2016-05-24 13:20:16 +02:00
cb1ec5dccb
Make calendar event type byte instead of int
...
Now the UUID will be constructed like this:
High 64bit 0x4742474200 | type
Low 64bit id
2016-05-24 13:11:57 +02:00
c9c9b420dc
Pebble: Send sunrise and sunset events to the pebble every day using AlarmManager
2016-05-24 11:19:57 +02:00
af3cfefec0
Merge branch 'master' into feature-sunrise
2016-05-23 23:52:39 +02:00
30c37d3172
Pebble: only remove apps from app list when they got deleted from cache also
2016-05-23 23:46:54 +02:00
884c4262cf
update changelog, bump version
...
(also change one German string and remove two newlines :P)
2016-05-23 23:37:57 +02:00
4504c5b5a4
Add Activity Description table and order samples
2016-05-23 23:31:22 +02:00
24c51deaf9
Pebble: also delete other files from cache when deleting .pbw
2016-05-23 23:15:07 +02:00
f697906572
update Japanese and German tranlation from transifex (thanks!)
2016-05-23 22:03:21 +02:00
bef59ae9c0
Parse new version of Pebble health datalog message with tag "84".
...
This message was previously treated as a further "Sleep" message type, with firmware version 3.12 further types were added that are clearly unrelated to sleep (possibly to high-intensity activities like running etc.), hence the related code is now moved to a separate class.
The only decoded records are still sleep-related.
Fixes #312
2016-05-23 21:13:12 +02:00
437de7f660
fix duplicate entry in strings.xml
2016-05-22 23:38:51 +02:00
efe5e546fd
Merge branch 'master' into feature-sunrise
2016-05-22 23:36:09 +02:00
80cf9fa8fe
Pebble: allow to delete apps from pbw cache
...
Also remove delete entries from all system apps' context menus (not only health)
2016-05-22 23:32:25 +02:00
30883ab244
Pebble: In AppManager mark cached apps with (C), installed apps on FW 2.x with (D) and (CD) if both is the case
...
Also always add pebble health as a system app to the list on devices that have it (no need to enable untested features for that anymore)
2016-05-22 22:48:45 +02:00
5a20d7ec81
Pebble: no longer clear list of cached apps as soon as the installed watchfaces is received from Firmware 2.x
...
This will result in duplicate entries (first the whole cache, then actually installed watchfaces)
It might already make watchface configuation working on 2.x even though it is dirty
I wish everybody would just update to 3.x *sigh*
2016-05-22 12:30:47 +02:00
ca714417ac
Pebble: also copy pbw to cache on Firmware 2.x
...
Neccessary step towards watchface configuration on 2.x
2016-05-22 11:33:14 +02:00
6370fdbebe
Merge branch 'master' into feature-sunrise
2016-05-22 01:25:52 +02:00
0d7986a5ab
Pebble: rework incoming reconnection support
...
This is now completely generic and should work for other devices also
Fixes #296
2016-05-22 01:19:28 +02:00
d5cca84780
Small fixlets
2016-05-20 22:04:30 +02:00
0267ddb356
Merge branch 'master' into db-refactoring
2016-05-20 21:49:59 +02:00
400ae2bc3b
Fix lint warnings using @TargetApi
2016-05-20 21:49:25 +02:00
fa34cf9a17
Merge branch 'master' into db-refactoring
2016-05-20 21:42:30 +02:00
f933eb8fcd
Merge pull request #306 from normano64/do-not-disturb
...
Detects if Do Not Disturb is in use
2016-05-20 21:21:08 +02:00
31eabe9605
Fixed things based on feedback
2016-05-19 23:58:13 +02:00
2e2030f67b
Update translations from transifex, thanks!
2016-05-19 22:07:55 +02:00
8a91628322
Detects if Do Not Disturb is in use.
...
Can handle sms and phone calls from priority senders when in Priority
only, but doesn't handle events and reminders.
2016-05-19 16:34:59 +02:00
4370be28b6
Remove some imports
2016-05-17 00:51:58 +02:00
75703b0dea
Import and Export db are back
2016-05-17 00:51:00 +02:00
2d2df64003
Port schema migration to greendao
2016-05-16 23:54:51 +02:00
907ad8f27a
correction regarding deletion of old pins
2016-05-16 23:48:18 +02:00
4b374e3f7e
Implement changeStoredSamplesType()
2016-05-16 23:45:21 +02:00
4bd578ebea
Pebble: send sunrise/sunset to watch for today and tomorrow, also delete previous timeline pins
2016-05-16 23:37:40 +02:00
876bdac918
More WIP: remove now unused code, better use of generics
2016-05-16 23:36:54 +02:00
40a376bbd0
Merge branch 'master' into db-refactoring
2016-05-16 23:01:16 +02:00
3e0bc16741
More WIP, but we're getting closer
...
current state:
- storing samples works (tested only mi band)
- charts work
2016-05-16 23:00:04 +02:00
017f650b3f
Pebble: send sunrine and sunset pins to timeline when setting time in debug menu
...
This is just a test and it will leak your timeline data, since we never delete it.
Also this adds some rough infrastructure for calendar events.
2016-05-16 17:30:11 +02:00
8c88223f26
update changelog
2016-05-15 23:29:19 +02:00
d66f842e9b
Mi Band: Make sure live activity gets stopped when using the back button
2016-05-15 22:24:37 +02:00
3a1f91b5a8
Default to low latency mode #287
...
Tested with Mi1A and Mi1S -- works fine and faster than without
low-latency mode.
2016-05-15 00:22:53 +02:00
5963843216
Experimental support for #274 (untested yet)
2016-05-15 00:15:31 +02:00
6e44ddaee6
WIP: db refactoring
2016-05-15 00:09:34 +02:00
5efe9a5eb8
update japanese and geraman translations form transifex (THANKS!)
...
I did not merge others because tx pull deletes stuff again
2016-05-14 12:23:01 +02:00
8ca821ab8a
More WIP on db refactoring
2016-05-13 23:47:47 +02:00
d0c8483d92
More WIP
2016-05-08 23:49:15 +02:00
9532fc879f
"Ported" to AbstractSampleProvider
2016-05-08 23:17:05 +02:00
21cafa83d8
WIP: some more query work
2016-05-08 22:58:50 +02:00
40837996f8
Fix logback initialization, closes #300
2016-05-08 21:39:23 +02:00
1a353239c4
Fix log content
2016-05-08 21:38:55 +02:00
9b7f2c1e91
try to fix weiredness with pebble reconnects
2016-05-08 17:19:01 +02:00
5b21895283
try to get BT alias name by reflection. Useful if you have a lot of Mi Bands
2016-05-07 21:46:20 +02:00
cc5941f7eb
Merge branch 'master' into db-refactoring
2016-05-05 10:19:19 +02:00
808e12d680
A little more WIP
2016-05-05 10:19:01 +02:00
65a95366f4
Mi Band: Allow setting low-latency FW update mode in Mi Band development settings
2016-05-04 13:24:32 +02:00
045d5119ff
Do not update summary for checkbox preference
...
Was causing summary to get overwritten by "true" or "false" when changing preferences
2016-05-04 13:07:11 +02:00
619a17425f
Mi Band: Display hint about starting Activity Activity instead of App Manager
...
TODO: Fix the string, I have no idea how to properly name the Activity Activity
2016-05-04 12:31:29 +02:00
70eaca8883
Further WIP towards greendao:
...
- for now, use a custom version of greendao with the fix 39ac07be550c5f5b6fd265c8870f58015c95e908
- use a superclass for activity sample classes that provides value normalization using SampleProvider
2016-05-01 23:56:14 +02:00
4744d8b59e
Some more WIP towards greendao. Note: does not compile atm.
2016-05-01 00:19:15 +02:00
b15ffcbf15
Sigh -- looks like I will have to find a less intrusive way to change the application id
2016-04-29 23:24:12 +02:00
7d15d4ff42
Also update the package name in the manifest
2016-04-29 23:19:19 +02:00
b363d08efb
WIP: a little work towards greendao
...
need to think of how to integrate MiBandActivitySample and PebbleActivitySample
into the app. There's GBActivitySample, MiBandSampleProvider, PebbleSampleProvider,
etc.
2016-04-29 23:12:30 +02:00
64a6b9a936
Merge branch 'master' into db-refactoring
2016-04-29 22:28:53 +02:00
6863fababe
Update changelog and prepare for 0.9.6
2016-04-29 22:07:16 +02:00
10d7274aa1
Fix testcases (all this should be scrapped and redone with e.g. robolectric)
2016-04-29 21:58:08 +02:00
5e02724c4c
Make automatic reconnect after connection loss configurable #293
...
Mi Band: automatically reconnect when the device is back in range
Also: #89
2016-04-28 23:17:13 +02:00
eca5d40efe
More javadoc
2016-04-26 00:02:35 +02:00
e1551226f6
Reject empty strings in Preferences for numeric inputs
2016-04-25 23:51:58 +02:00
47984dba0a
javadoc
2016-04-25 23:45:27 +02:00
e35ce978bd
Remove now unused imports + fix one more SharedPreferences usage
2016-04-25 23:43:19 +02:00
0704915a88
Move parsing of preference strings to int values to Prefs
2016-04-25 23:39:03 +02:00
0c715a2669
Wrap access to SharedPreferences with "Prefs"
...
(to centralize quirk handling)
2016-04-25 23:18:55 +02:00
b89eb14be7
allow two digits for number of call notifications (e.g. 60)
2016-04-25 00:13:09 +02:00
65bd1581bc
Fix receivers, display measured heart rate as a toast again, fixes #292
2016-04-24 18:17:04 +02:00
36a34bd17c
fix remaining strings saying "App Mananger". Closes #290
...
(I fixed on transifex where possible, unfortunately some strings vanish there from time to time, I guess it is the case when the english string changes)
2016-04-24 11:37:18 +02:00
abe1c9070f
update German and Korean from transifex, thanks!
2016-04-24 11:32:09 +02:00
18fe09bb7c
make add icon on FAB white
2016-04-23 23:31:19 +02:00
3fefb57fdd
Fix colors in alarm activity for dark theme
2016-04-23 23:24:56 +02:00
d5639a0520
Updated translations from transifex (thanks!)
2016-04-21 23:32:49 +02:00
c573f989d0
Prepare for 0.9.5
2016-04-21 23:13:06 +02:00
0427294227
Dynamically enable/disable logging #288
2016-04-18 00:20:40 +02:00
a45eacf9b8
WIP: schema update, ... #206
2016-04-17 19:52:51 +02:00
97cac282c8
Merge branch 'master' into db-refactoring
2016-04-15 23:05:16 +02:00
98d7237ec3
Display a different notification icon, when disconnected
...
Better icons welcome :-)
2016-04-15 22:57:13 +02:00
e451e8155c
Remember the map so that we can look up the name later, as well, closes #275
2016-04-14 23:55:40 +02:00
a8279faa5b
Merge branch 'master' into db-refactoring
2016-04-14 23:28:00 +02:00
a460049a1b
Sort by label and blacklist status, hopefully fast enough #275
2016-04-14 23:23:06 +02:00
a9e7cdcaa7
use some colors from the theme for charts activity
2016-04-14 17:41:04 +02:00
a9b75a63b3
simply derive AbstractGBFragmentActivity from GBActivity instead of FragmentActivity
...
This fixes the Actionbar being invisible
2016-04-14 17:16:43 +02:00
46086f0408
allow dark theme in charts activity.
...
The charts however are still the same
2016-04-14 17:04:49 +02:00
faa6a9d906
use android:summary="%s" for ListPreferences
2016-04-14 16:44:44 +02:00
f76a1ba16f
allow to switch to dark theme im settings
2016-04-14 16:15:58 +02:00
367aced03d
also use theme in settings
2016-04-14 15:34:53 +02:00
4bcebca744
Work towards dark theme, remove -v21 specific theme definition
2016-04-14 15:21:25 +02:00
24cc3725d2
equalize size of connected and disconnected device icons
2016-04-14 11:07:44 +02:00
b25a47c398
Immediately disable hr reading and activity tracking when leaving the tab #273
2016-04-13 23:36:14 +02:00
e87a357bed
Show separate curves when the time between two measurements is too long #273
2016-04-13 21:38:35 +02:00
ae5d9089d8
Slight improvement to hr charts #178
2016-04-13 21:21:10 +02:00
78bf516897
Disabling sleep measurement for continuous measurement is not necessary
...
Looks like they don't interfere, after all. #178
2016-04-12 23:25:12 +02:00
f15a97d994
Initial live heartrate measurement in the live activity tab #178
2016-04-12 23:12:50 +02:00
58d90c2a66
remove obsolete Holo theming
2016-04-12 13:04:28 +02:00
7ab31514dc
Rework charts to completely fix crash in charts activity #277
2016-04-11 23:18:12 +02:00
82b4394b40
Ignore generated entities
2016-04-10 21:51:47 +02:00
290d695fec
Add margin for the shadow of the FAB
...
Also make the hint color grey, like in the discovery activity
2016-04-10 21:36:32 +02:00
39cba84ab1
Apply gray images on non-connected devices in the list.
2016-04-10 21:11:52 +02:00
e5726075a4
Rework device item layout
2016-04-10 21:11:52 +02:00
eba1ee6dc6
Device disabled icons
2016-04-10 21:11:52 +02:00
70ed14243f
Remove all getActionBar occurences, temporary fix for overlap
2016-04-10 21:11:52 +02:00
83e6e6b85f
Add background image for empty ControlCenter
2016-04-10 21:11:41 +02:00
80a21f2ec2
Move Discovery functionality to FAB
2016-04-10 21:11:41 +02:00
5a3004cbce
AppCompat and FAB, more Material Design
2016-04-10 21:11:41 +02:00
3ef942b5d3
Do not crash on null BT adapter, allows UI work on emulator.
2016-04-10 21:11:41 +02:00
57ecba16f3
Update Changelog for 0.9.4
2016-04-09 10:05:27 +02:00
802e9a8235
OK, revert to connectGatt(false), connect often does not work with true #249
2016-04-09 09:53:03 +02:00
42dda911e4
Fix crash in charts activity, closes #277
2016-04-08 23:02:50 +02:00
1e5dbb6a23
OK, just connect(true) is not sufficient #249
...
(we again get connection problems. Let's try this.)
2016-04-07 20:53:25 +02:00
a49335fa67
Allow to change stored samples converting only certain old types
2016-04-07 17:52:15 +02:00
b1a93c430d
interrupt thread instead of joining to fix ANR
2016-04-07 00:21:21 +02:00
6895c5b776
fix xml changelog
2016-04-06 23:29:59 +02:00
c7b64b6da7
update Japanese translation from transifex (thanks!)
2016-04-06 23:03:56 +02:00
e91b5a07bd
Pebble: change delay between reconects to 1,2,4,8,16,32,64 (max) seconds
2016-04-06 22:55:04 +02:00
94cec55a20
Merge pull request #276 from roidelapluie/reconnect
...
Pebble: Smarter reconnection attempts
2016-04-06 22:41:07 +02:00
d2af3468f0
Add support for new datalog message added in pebble firmware 3.11
...
This adds support for storing deep sleep data.
2016-04-06 21:48:16 +02:00
e42a041448
Pebble: Smarter reconnection attempts
...
Sleep several seconds between reconnection attempts:
One second after first attempt, two after the second, and so on.
refs #89
2016-04-06 12:37:23 +02:00
51def0d497
Add light intensity to the known steps datalog message.
...
Add support for record version 6 introduced with firmware 3.11.
There are more data in each record now, but we still do not know what they mean.
Close #270
2016-04-04 23:33:17 +02:00
34600e085e
Fix wrong assignment, needed to properly deal with datalog messages longer than 255
2016-04-04 23:13:57 +02:00
403f74e59b
Enable heart rate charts #232
...
(And fix some charting issues)
2016-04-04 23:05:20 +02:00
a15b327ff1
Refactoring: get rid of ServiceCommand, use new CallSpec and MusicSpec to pass Call and Music info
2016-04-04 20:08:34 +02:00
3e3cf462a6
Attempt to re-enable automatic reconnect (autosensing) #249
...
(now that initializing device works again)
2016-04-03 23:32:15 +02:00
59c3970008
Reuse characteristic objects #234
2016-04-03 23:01:58 +02:00
b129844169
Small fixes to PR 273 #232
...
- dynamically toggle hr sleep support when preference changes
- check hr support dynaically after device info is available to avoid false error message
2016-04-03 22:38:06 +02:00
7cda9f1923
Merge branch 'computerlyrik-heartrate-sleep-support'
2016-04-03 21:46:29 +02:00
804a85d31f
Small refactoring of BtLE actions
2016-04-03 21:46:24 +02:00
b54fe53cd5
Merge branch 'heartrate-sleep-support' of https://github.com/computerlyrik/Gadgetbridge into computerlyrik-heartrate-sleep-support
2016-04-03 21:02:45 +02:00
4389c1cca3
Pebble: wait 4 seconds instead of 2 when notifications/calls trigger reconnection
2016-04-03 18:36:30 +02:00
7ddfd35c35
Pebble: auto connect on incoming notification or phone call if connection was lost unxpectedly before
2016-04-03 18:30:20 +02:00
a4919789ca
Add some progress to firmware updating #271 #234
...
Also: remove the low latency mode for firmware update,
because my Mi1S simply disconnects then.
Still missing in the view: device disconnects
2016-04-03 00:50:45 +02:00
7a224243a3
Try to quit Gadgetbridge by stopping the service
2016-04-03 00:49:54 +02:00
2d10c11005
Log the length of the bytes written
2016-04-02 22:35:37 +02:00
0e49535966
Fix progress during fw update #234
2016-04-02 22:24:33 +02:00
f2de21a664
test if heartrate is supported before writing preferences
2016-04-02 16:11:51 +02:00
20aa7d9ad9
add preference to set hartrate sleep detection
2016-04-02 16:09:30 +02:00
72258c178c
fix in string represantation conversion
2016-04-02 16:08:36 +02:00
ea5c6a0848
Log ignored notifications when updateCoordinator is null
2016-03-31 21:57:36 +02:00
6f97b8c1e5
Log the date that we receive from the Mi Band
2016-03-31 21:54:09 +02:00
66c1b3f178
Relax check for Mi1S device detection #234
2016-03-31 21:39:51 +02:00
4631df67ac
Some more logging + add svg launcher again (somehow it was not added again)
2016-03-30 22:53:08 +02:00
776a743285
Move svg file to another place to fix build
2016-03-30 22:06:03 +02:00
ffc006c21c
Fix ordering problem with firmwareInfoSent state variable #234
2016-03-30 21:56:00 +02:00
cc7f5406ef
Use low latency transfer mode for fw update #234
2016-03-30 21:48:42 +02:00
5f72daa43a
Add SVG launcher icon, closes #190 THANKS!
2016-03-29 22:59:22 +02:00
f8c761068e
Updated for 0.9.3
2016-03-29 22:45:46 +02:00
e931cf47d7
Need to pass '0' as parameter to mi band fw metadata info #234
2016-03-29 22:15:14 +02:00
b3590fed35
For simplicity hide some internal states from the user
...
Display connecting->connected instead of connecting->connected->initializing->initialized
2016-03-28 23:56:20 +02:00
cbc57b4407
Pebble: Fix stupid bug that made Pebble Health unavailable in App Manager ( Fixes #269 )
2016-03-28 23:46:05 +02:00
8815f0d134
Small cleanups and fixlets.
2016-03-28 23:02:22 +02:00
6ce63276a3
play around with play states, simplify weired nested switch
2016-03-27 19:50:32 +02:00
adfef3db42
Prepare code for more music metadata (duration, track count, current track number)
...
Oh and format code
2016-03-27 17:45:44 +02:00
bfcfe82f17
Improve pairing activity: #254
...
- add hint about rebooting phone
- request enabling bluetooth
2016-03-26 20:46:48 +01:00
9d29e4db3f
bump version, update xml changelog
2016-03-26 10:04:02 +01:00
bff5837930
Sort device infos
2016-03-25 23:54:42 +01:00
8165751e57
Refactoring to test the double firmware update procedure #234
...
(while performing the same, known to be working firmware update for Mi1A)
Result: double firmware update procedure works on Mi1A.
Also updated FirmwareTest. Perform all tests not only in the test itself,
but also at runtime before doing the actual update.
Further:
- fix setting of firmwareInfoSent state variable, which prevented installation
of the section firmware
- make one string translatable
2016-03-25 23:45:27 +01:00
a208907ba7
update Japanese from transifex (thanks!)
2016-03-25 23:09:25 +01:00
98949f3b54
bump version update xml changelog
2016-03-25 11:29:50 +01:00
3714ec82da
Extracted String "HR: ", (= Heart Rate Firmware Version)
2016-03-24 22:23:16 +01:00
89eddb13b0
Fixed connection issues by reading the date from the band #249
2016-03-24 22:10:23 +01:00
e5b0afb916
Enable low latency during activity sync
2016-03-24 21:26:51 +01:00
0e435d6d94
Fix for device item not clickable when info items are visible
2016-03-23 23:34:42 +01:00
11ac01f0e8
Set low latency mode during initialization #249
...
This appears to fix the initialization getting stuck sometimes, e.g.
after turning on bluetooth and then connecting.
The band incidentally sends 0x8 when it's stuck (won't accept the UUID_PAIR
request).
2016-03-23 22:50:42 +01:00
1348bad4d3
Improved log output
2016-03-23 22:17:01 +01:00
9d9ef8a6f8
Some cleanup
2016-03-23 22:06:48 +01:00
71461642f7
Fix enabling "Write Log File" option ( closes #261 )
2016-03-22 23:07:11 +01:00
df3a06ac9b
Reformat code, make getter of @NonNull members also @NonNull
2016-03-22 21:55:15 +01:00
b0ec74696d
Give better feedback when a firmware cannot be installed #234
2016-03-22 16:12:27 +01:00
767f359319
Launch Android's Bluetooth settings instead of our activiy on Android >= 6.0
...
BLE scanning does not work on Android 6.0 and for the Pebble it does not add any value anyway.
2016-03-22 13:43:01 +01:00
424d9cd142
More work on firmware detection, recognition and validation #234
...
Should be as robust as possible now.
2016-03-21 23:42:34 +01:00
1933e2bf10
Localize the title of the configuration activity.
...
Auto open local settings (e.g. clay)
2016-03-21 21:19:32 +01:00
1aadcb958b
update changelog
2016-03-21 20:20:08 +01:00
275839a7f4
last arg of copyOfRange() is index, not length!
2016-03-21 04:18:45 +01:00
f7b71c1f96
Add logging to firmware detection #234
2016-03-21 04:17:12 +01:00
76fc7a2aec
always save last device address when connecting, fixes #258
2016-03-20 19:48:54 +01:00
f046e66bf1
update Italian translation (thanks @danielegobbetti)
2016-03-20 18:45:04 +01:00
4a3547228e
Update changelog md file and bring xml file on par with it.
2016-03-20 18:15:45 +01:00
dbeded8d04
In Control Center, do not show alarm configuration in context menu if device does not support it
2016-03-20 17:53:55 +01:00
c5a7ca4b5b
properly re-sync all translation files with transifex
...
(this only reorders stuff since I had to repush broken tranlations to transifex again)
2016-03-20 15:38:05 +01:00
4fe9489909
update German translation
2016-03-20 15:34:07 +01:00
4be1926459
reformat code though Android Studio
2016-03-20 15:00:05 +01:00
b3410dcebe
Improved testcase #234
2016-03-20 12:18:43 +01:00
4f956000c5
Enhanced support for firmware detection, recognition and upgrade #234
...
Also supports double firmware upgrade for Mi1S.
- so far, only hr firmware upgrade is tested for 1S
- adds junit testcases for firmware recognition and handling
2016-03-20 01:07:57 +01:00
6d8d6d5bc8
Testcases for firmware checking
2016-03-20 01:07:57 +01:00
c2ae9ec530
Update French translation from transifex (thanks)
2016-03-18 22:33:36 +01:00
538961fd2c
Add some style, intercept and display toast in case of JS errors
2016-03-18 17:50:24 +01:00
e69fac9704
Do not show the configure menu item for non configurable watch apps.
2016-03-18 16:47:14 +01:00
1603d60144
right align info icon in control center
2016-03-17 15:28:43 +01:00
89591fd5fe
update ukrankian translation from transifex (thanks)
2016-03-16 22:54:46 +01:00
61e3cf4348
update japanese translation from transifex (thanks!)
2016-03-16 22:53:36 +01:00
238e394d21
update french translation from transifex (thanks)
2016-03-16 22:38:27 +01:00
c224a40d0e
update spanish translation from transifex (thanks!)
2016-03-16 22:37:14 +01:00
5906c02330
Merge remote-tracking branch 'origin/danielegobbetti-playground'
2016-03-16 22:27:13 +01:00
c5a887192d
Remove/revert some temporary test code
2016-03-16 00:27:32 +01:00
e26e6d7b24
Display HR firmware version
...
Hide fw,hw,hr versions by default and show them on demand with an info
button.
2016-03-16 00:27:32 +01:00
4aaf3dd162
Use hw version to make device names unique, then mac addr
2016-03-16 00:27:32 +01:00
91f02ae920
WIP: Lots of work towards double firmware update for Mi 1S #234
2016-03-16 00:27:08 +01:00
ea855a4cc2
Also open public URLs with an external browser.
2016-03-13 08:31:50 +01:00
3f39928df5
Some more cursor-related improvements (closing)
2016-03-08 23:48:31 +01:00
10975feb49
s/moveToFirst/moveToNext/
2016-03-08 23:30:31 +01:00
9643fa6062
s/moveToFirst/moveToNext
2016-03-08 23:29:42 +01:00
d378b4eb7b
Intercept clay pebblejs://close url
2016-03-08 21:44:12 +01:00
7e8281e8d4
Improve exception handling logic a bit
2016-03-08 21:33:12 +01:00
87023ebdb3
Don't retrieve the column index again and again in a long loop
...
Also: fix weird iteration logic
2016-03-08 21:33:12 +01:00
2da50e27c2
call the ready event as soon as the app js file has been loaded. Add a button to debug the different steps.
2016-03-08 17:45:11 +01:00
a89fea9c7d
Pebble: Fix crash when starting pebstyle
...
Also make code for "push" handlers more generic
2016-03-08 12:02:00 +01:00
4362f78028
Pebble: Do not display Health on original Pebbles
2016-03-08 11:49:08 +01:00
a3ee3c15fc
Pebble: copy pebble-app-js.js out of the pbw upon installation not upon reading the .pbw
...
This eliminates the need to copy the whole file into a byte[], and all file size limts are gone.
2016-03-08 11:41:20 +01:00
88982a6174
Merge pull request #235 from Freeyourgadget/feature-configuration
...
Use external browser for configuring pebble apps
2016-03-08 10:41:46 +01:00
a96120f91d
Clear the chart when there are no samples
...
(e.g. when switching to another day for which no samples are
available, the chart now becomes empty instead of displaying the
samples from the last day with data.
2016-03-07 23:17:02 +01:00
5eb8f57b4c
Some more byte -> int conversions
2016-03-07 22:47:34 +01:00
5ae680cab5
Don't flush the logfile synchronously
2016-03-07 22:46:35 +01:00
25e58eb414
Upgrade mpandroidchart to 2.2.3
2016-03-07 22:46:03 +01:00
be012eca8d
For Mi Band 1A (fw 5.15.7.14) we get 0xa for auth success #180
2016-03-07 21:43:45 +01:00
50dd7f5eba
Better check for heartrate support on non-heartrate devices
2016-03-07 21:36:31 +01:00
f1ba50b62a
update xml changelog
2016-03-07 01:15:23 +01:00
dda6cb34e1
Fix logfile rotation (bug in logback-android)
2016-03-07 01:09:43 +01:00
2902e60d51
prepare 0.8.2
2016-03-07 00:55:17 +01:00
619ea04a63
Fix database creation and updates #246
...
The creation script *must* always do the full creation so that fresh installs
get the correct database (no upgrade scripts will run for them)
2016-03-07 00:39:47 +01:00
459f6baf08
Fix missing column in the creation script (upgrades were fine, but new installation weren't).
...
Reindent changelog file.
2016-03-06 17:28:21 +01:00
fa6b572172
Merge branch 'feature-configuration' of https://github.com/Freeyourgadget/Gadgetbridge into feature-configuration
2016-03-05 21:26:03 +01:00
97faf61c5a
Log db upgrade/downgrade requests
2016-03-04 23:37:42 +01:00
dc162a9ac8
Only add column if it doesn't exist yet
...
Column can exist if there down- and upgrades
2016-03-04 23:25:11 +01:00
3b3458e196
Show the heart rate measurement tooltip a little longer
2016-03-04 23:08:13 +01:00
6d4b98719a
Implement some further JS methods to make additional watchapps happy
2016-03-04 17:44:42 +01:00
3920b3f977
Do not override the configured settings with our old stored values (but keep them around)
2016-03-04 17:43:43 +01:00
f616e4f571
Pebble: skip .js file if too large instead of breaking installation
...
(Hotfix)
2016-03-03 17:46:58 +01:00
3786e0b7f2
fix typo
2016-03-03 16:04:17 +01:00
1e44bb03fb
Pebble: convert Boolean to String for app configuration
2016-03-03 16:02:30 +01:00
bd7b34985b
reformat code and optimize imports
2016-03-03 15:47:00 +01:00
864e0953d9
only allow starting AppManager after device is initalized (else platform cant be determined)
2016-03-03 14:29:46 +01:00
902ff39c0b
start app when about to be configured
2016-03-03 14:25:44 +01:00
2a7f9226a0
Pebble: send configuration to watch
...
TODO: handle booleans
2016-03-03 14:23:17 +01:00
fa924ff9d8
Pebble: fix crash when navigating back from configuration activity
2016-03-03 13:05:51 +01:00
860ded1022
refromat code
2016-03-03 11:54:07 +01:00
63d938559e
pass GBDevice down to ExternalPebbleJSActivity to determine the platform version (aplite,basalt,chalk)
2016-03-03 11:52:30 +01:00
089a59168e
Initial support for using an external browser for configuring pebble apps. This allows existing configuration pages to work without having internet access ourselves.
...
This is a better approach as initially thought in #191 .
What is missing is outlined in the (several) TODOs.
2016-03-02 21:07:27 +01:00
652c5575b3
user ckChangeLog to display the Changelog
...
There were other fancier libraries, but this one was so simple to integrate, that I could not resist ;)
2016-03-02 00:37:43 +01:00
5eb525ee44
Merge pull request #239 from 0nse/sleepAlarmWidget
...
Add widget to quickly set an alarm according to the user's preferred sleep length (in hours)
2016-03-02 00:36:13 +01:00
ba35679690
/ Pad the alarm time with zeroes when toasting.
2016-03-02 00:15:31 +01:00
7651c080c2
/ Only execute setAlarmViaAlarmManager when we are running Lollipop+.
2016-03-02 00:05:58 +01:00
6e7abecb17
/ Use GB.toast instead of Android Toast.
2016-03-02 00:01:41 +01:00
fc464d112d
change some more short and byte to int regarding Morpheuz
2016-02-29 23:13:07 +01:00
cbe73f71a1
Fix some typos (thanks!) #178
2016-02-29 22:08:34 +01:00
3babedf936
+ Add Widget which allows quickly creating an alarm depending on the user's preferred sleep length (in hours).
2016-02-29 21:36:39 +01:00
ed85fd5011
convert byte and short values related to activity tracking to int
...
This avoids a lot of problems because java
- does not know unsigned values
- jvm and dalvic do not internally support byte and short
- sqlite does not know them either
2016-02-29 20:54:39 +01:00
Steffen Liebergeld