a15fe0e332
Merge branch 'master' into next
2012-06-10 17:57:25 +02:00
f0b56c5e98
parser: reorder v/h/vertical/horizontal
...
This eliminates an error message upon split horizontal which did not
occur in older i3 versions. The command itself worked just fine.
2012-06-10 17:56:28 +02:00
2afecaf355
Add a new command 'move to workspace current'
...
Added a new command 'move to workspace current' which can be used
with criteria to move a window to the current workspace.
2012-06-03 19:42:56 +02:00
fffc53c246
Restrict "move to workspace" commands in fullscreen.
2012-06-03 16:24:53 +02:00
4452bfb942
Prevent moving out of fullscreen containers.
2012-06-03 16:24:53 +02:00
8bf4e9e059
Restrict directional focus in fullscreen.
...
This reuses the same fullscreen focus logic to ensure that focus
doesn't escape a fullscreen container.
2012-06-03 16:24:53 +02:00
250c260eaa
Allow focus child/parent when in fullscreen.
...
This is now restricted according to the already defined fullscreen
focus constraints. Test case 157 was removed, as we don't prevent
level up/down in fullscreen anymore. Those commands are properly
tested in fullscreen by test case 156.
Fixes : #612
2012-06-03 16:24:53 +02:00
da1e232757
Refined the fullscreen focus constraints.
...
Basically, a focus change can't escape a fullscreen container. The
only exception is per-output fullscreen containers, as you should
be able to focus a container in a different workspace in this case.
This is an improvement on 4eab046e
2012-06-03 16:24:53 +02:00
1103f94c34
Merge branch 'master' into next
2012-05-28 23:37:26 +02:00
485871ffdd
Get rid of references to level up/down.
...
In v4 syntax, that's focus parent/child.
2012-05-28 23:37:15 +02:00
ed957d60a7
Merge branch 'master' into next
2012-05-09 21:08:28 +02:00
4eab046e8f
Allow focus w/ target when in fs in some cases.
...
If the target is in a different workspace, there's no reason why
we wouldn't allow the user to focus it. We already allow this when
focusing a workspace, for example.
2012-05-09 21:08:19 +02:00
eab9f46c33
Merge branch 'master' into next
2012-05-09 20:39:26 +02:00
ec4dddb608
tests: add test to verify workspace_auto_back_and_forth works with 'workspace number'
2012-05-09 20:33:41 +02:00
82e0eaa315
tests: Check that 'workspace number <number>' opens a new workspace
2012-05-09 20:33:11 +02:00
8557b05a2c
t/141-resize.t: do not compare float values directly. use i3test.pm::cmp_float which compares using precision of 1e-6.
2012-05-05 19:15:43 +02:00
bbe607899c
Send proper error messages upon parser failures, use yajl for generating command replies
...
Fixes : #693
2012-05-02 22:01:50 +02:00
1bb165a29a
tests: warp the pointer to in multi-monitor tests to avoid flaky tests
2012-04-09 14:48:57 +02:00
983ba656fc
t/166-assign: wait until the window is definitely mapped
2012-04-09 14:48:25 +02:00
7210ab22d7
t/166-assign: remove unnecessary sleeps
2012-04-09 14:48:15 +02:00
0f10ccdf12
Implement fake-outputs option (cmdline, cfg) for multi-monitor testing
...
This kills the dependency on xdmx and makes the testsuite simpler
and more flexible (in the output sizes / configurations).
2012-04-09 14:28:36 +02:00
373b4ad74a
Implement 'rename workspace <old_name> to <new_name>'
2012-04-08 20:40:00 +02:00
ad513b4799
Implement 'move [container|window] to workspace number <number>'
2012-04-08 20:33:46 +02:00
72078c704e
Implement 'workspace number <number>' to switch to named workspaces
2012-04-08 19:17:46 +02:00
849e06f21e
Replace the old fullscreen container when requesting fullscreen
...
Fixes : #510
2012-04-08 17:53:37 +02:00
2d110c90e6
Implement resize <grow|shrink> <width|height>, use it in the default config
...
Fixes : #576
2012-04-08 16:00:15 +02:00
c0c2fd631b
add a testcase for the previous commit
2012-04-05 18:12:24 +02:00
941267e98e
testsuite: explicitly start Xdummy with -nolisten tcp
2012-03-26 17:00:44 +02:00
f78f137ed0
Extends move command for floating windows
2012-03-25 11:06:49 +02:00
2abfb5a88b
Bugfix: Also clear the command parser’s stack upon invalid commands (Thanks helgikrs)
...
Fixes : #652
2012-03-21 17:20:07 +01:00
d085e88d02
t/158-wm_take_focus: use sync_with_i3 instead of a timeout
2012-02-21 14:37:55 +01:00
41400d8a16
t/164-kill-win-vs-client: get rid of sleep()s
2012-02-21 14:28:37 +01:00
bee1e90b1e
t/187-commands-parser: shave off a bit of time by consolidating calls
2012-02-21 14:22:26 +01:00
b21a675a9c
t/171-config-migrate: shave off a bit of time by consolidating migrate_config calls
2012-02-21 14:11:04 +01:00
06a9820b5f
t/166-assign: check for i3-nagbar in the process hierarchy instead of sleep(1)
2012-02-21 13:58:49 +01:00
7e05a0700a
tests: don’t wait for window map event in open_special
...
Since the window doesn’t get mapped at all in these tests (it’s assigned to an
invisible workspace), this saves us a timeout of 2 seconds :).
2012-02-21 13:40:53 +01:00
ab9ba6fcf9
Use gettimeofday() and struct timevals instead of time()
...
Initially I thought using the second precision time() function is good enough,
but to make t/113-urgent.t considerably faster (>2s vs. 0.08s), we put in a
little more effort and use gettimeofday. Otherwise, this test blocks the whole
testsuite from completing much faster on modern machines :).
2012-02-21 13:38:49 +01:00
a2d80c4ab9
tests: add a testcase for the floating size constraints
2012-02-16 18:43:47 +00:00
e114b3dba2
Refactor the interface of commands.c
...
This change has two implications:
1) tree_render() will now be called precisely once for input which consists of
multiple commands (like "focus left; focus right"). Also, the caller of
parse_command() has to call it. This makes us able to fix tickets such as
ticket #608 (where multiple tree_render() calls are noticable).
2) The output of a command is now a JSON array of return values of the
individual subcommands. In the case of "focus left; focus right", this is:
[{"success":true}, {"success":true}]
While this is incompatible with what i3 returned before, the return value of
commands was undocumented and therefore not subject to our API stability.
2012-02-15 20:57:25 +00:00
19f3f84d29
tests: add test for previous commit
2012-02-15 18:08:53 +00:00
6d0dcf06ef
tests: make t/504-move-workspace-to-output consistent with the previous commit
2012-02-15 18:02:02 +00:00
974e70459d
tests: add a test for the urgent= criteria
2012-02-14 22:47:40 +00:00
82247fd0ab
Bugfix: Correctly handle missing ending double quotes (+test) (Thanks mxf)
2012-02-10 19:49:38 +00:00
2f8d3d3390
Bugfix: Properly handle workspace names with double quotes (+test) (Thanks kvapen)
2012-02-07 22:50:27 +00:00
ed2bcc15e3
Merge branch 'master' into next
2012-02-07 17:42:58 -05:00
0fc459892e
Bugfix: Properly split when the current container is alone within a stacked/tabbed con (+test) (Thanks aksr)
...
Fixes : #630
2012-02-07 17:42:35 -05:00
4fe974408d
Merge branch 'master' into next
2012-02-07 17:41:36 -05:00
4f98bbf5ff
Bugfix: Obey workspace_layout when re-inserting floating containers (+test) (Thanks aksr)
...
The code wasn’t using con_attach and therefore didn’t obey workspace_layout.
Fixes : #631
2012-02-07 17:41:00 -05:00
efa1cada29
tests: Make i3 create its temporary files in /tmp/i3-testsuite
...
This behavior can be avoided by passing dont_create_temp_dir => 1 to
launch_with_config (or activate_i3).
This commit fixes t/159-socketpaths.t being flaky on non-systemd computers.
2012-02-07 17:38:45 -05:00
8a57cb48c8
testcases: requires Test::More >= 0.94 (for subtests)
2012-01-29 18:03:03 +00:00
Michael Stapelberg