fixes#1835
This commit improves the translation of keysyms to keycodes by loading
keymaps using libxkbcommon-x11 and using libxkbcommon for figuring out
the keymap, depending on each keybinding’s modifiers. This way, the
upper layers of complex layouts are now usable with i3’s bindsym
directive, such as de_neo’s layer 3 and higher.
Furthermore, the commit generalizes the handling of different XKB
groups. We formerly had support only for two separate groups, the
default group 1, and group 2. While Mode_switch is only one way to
switch to group 2, we called the binding option Mode_switch. With this
commit, the new names Group1, Group2 (an alias for Mode_switch), Group3
and Group4 are introduced for configuring bindings. This is only useful
for advanced keyboard layouts, such as people loading two keyboard
layouts and switching between them (us, ru seems to be a popular
combination).
When grabbing keys, one can only specify the modifier mask, but not an
XKB state mask (or value), so we still dynamically unbind and re-bind
keys whenever the XKB group changes.
The commit was manually tested using the following i3 config:
bindsym Group4+n nop heya from group 4
bindsym Group3+n nop heya from group 3
bindsym Group2+n nop heya from group 2
bindsym n nop heya
bindsym shift+N nop explicit shift binding
bindsym shift+r nop implicit shift binding
bindcode Group2+38 nop fallback overwritten in group 2 only
bindcode 38 nop fallback
…with the following layout:
setxkbmap -layout "us,ua,ru,de" -variant ",winkeys,,neo" \
-option "grp:shift_caps_toggle,grp_led:scroll" \
-model pc104 -rules evdev
By default (xkb group 1, us layout), pressing “n” will result in the
“heya” message appearing. Pressing “a” will result in the “fallback”
message appearing. “j” is not triggered.
By pressing Shift+CapsLock you switch to the next group (xkb group 2, ua
layout). Pressing “a” will result in the “fallback overwritten in group
2 only” message, pressing “n” will still result in “heya”. “j” is not
triggered.
In the next group (xkb group 3, ru layout), pressing “a” will result in
the “fallback” message again, pressing “n” will result in “heya”,
“j” is not triggered.
In the last group (xkb group 4, de_neo layout), pressing “a” will still
result in “fallback”, pressing “n” will result in “heya”, pressing “j”
will result in “heya from group 4”.
Pressing shift+n results in “explicit shift binding”, pressing shift+r
results in “implicit shift binding”. This ensures that keysym
translation falls back to looking at non-shift keys (“r” can be used
instead of ”R”) and that the order of keybindings doesn’t play a role
(“bindsym n” does not override “bindsym shift+n”, even though it’s
specified earlier in the config).
The fallback behavior ensures use-cases such as ticket #1775 are still
covered.
Only binding keys when the X server is in the corresponding XKB group
ensures use-cases such as ticket #585 are still covered.
If the match expression is a plain number (e.g., '99'), the number of a workspace will be compared strictly. Otherwise, the match expression is taken as a regular expression and compared against the workspace's name.
This allows all of the following:
for_window [workspace=5] ...
for_window [workspace="5:foo"] ...
for_window [workspace="foo"] ...
fixes#1769
* <xyz> denotes that some string must be used which is not a fixed value (e.g., a command), but a variable string (text, a number, ...)
* [xyz] denotes that the parameter is optional
* abc|xyz denotes that either abc or xyz must be given
* Implement criterion specs just like it is done in the spec for the config
* Declare variables in test case early so the 'my' keyword can be dropped in the actual test cases
Outputs may disappear momentarily and come back later.
To prevent i3 from exit when no output is available momentarily, add a timeout delay_exit_on_zero_displays.
Introduce a config directive "show_marks [yes|no]" to en- or disable drawing marks on window decorations.
To not change the look & feel of existing configurations, the default is "no".
When a window receives a _NET_ACTIVE_WINDOW message, it can steal the focus. This may not be preferable to all users.
With this directive, the user can choose from one of the following:
1) 'smart' - focus the container if its workspace is visible, otherwise set the urgency flag (default)
2) 'urgent' - always set the urgency flag, do not steal focus
3) 'focus' - always switch focus, never set the urgency hint
4) 'none' - ignore the request entirely (do not switch focus, nor set the urgency hint)
fixes#1426
This option allows toggling marks on a window without knowing whether the mark is already set or not.
It behaves as follows:
1) If the matched window has no mark, the new mark is set.
2) If the matched window has another mark, the old mark is removed and the new mark is set.
3) If the matched window already has the mark, the mark is removed.
The behavior that all non-matched windows have this mark removed is kept.
fixes#1463
This introduces a "separator_symbol" property for the i3bar configuration.
If set, the specified string will be used as a separator instead of a vertical line. Since it is an optional configuration, complete backwards compatibility is given.
fixes#1472
Add the `--whole-window` switch for mouse bindings. This switch controls
what part of the container the pointer must be over to trigger a mouse
binding. The default is to only trigger mouse bindings over the
titlebars. With this switch, a mouse binding will be triggered over the
main part of the window as well.
This is a breaking change to the previous behavior, which would trigger
a mouse binding with a modifier over any part of the window.
fixes#1429
Rather than just toggling the fullscreen modes, allow to set them
directly with:
fullscreen enable|toggle [global]
fullscreen disable
For compatibility, retain the previous command and its toggling behavior:
fullscreen [global]
fixes#1120
Users can specify a command to run when a button was pressed on i3bar to
override the default behavior. Currently only the mouse wheel buttons
are supported. This is useful for disabling the scroll wheel action or
running scripts that implement custom behavior for these buttons.
Example:
bar {
wheel_up_cmd nop
wheel_down_cmd exec ~/.i3/scripts/custom_wheel_down
}
fixes#1104
This patch adds a new configuration option "mouse_warping [output|none]".
When mouse warping is disabled, mouse cursor does not jump to middle of current
screen when changing workspaces between multiple outputs. This introduces a
"special" cursor state, where focus is in one window and cursor on another.
Useful for eg. scrolling a web page with mouse wheel while typing into another
window on keyboard.
Implement the configuration option within the bar config directive for
custom workspace numbers with the directive `strip_workspace_numbers
yes`.
This directive strips the workspace name of the number prefix and
delimiter. When the workspace name consists only of the number, it will
default to show the number.
For example:
* "2:5" -> "5"
* "4:$" -> "$"
* "8" -> "8"
This allows customization of i3bar for alternate ordering of workspaces
which has a legitimate use for alternate keyboard layouts such as
Dvorak.
fixes#1131
i3 would accept an invalid resize command like 'resize shrink width 10
px or' without specifying the ppt value, and then crash. This patch
fixes the parser specification.
i3 current behavior hides the binding mode indicator when
workspace buttons are disabled.
This patch adds a new configuration for i3bar called
'binding_mode_indicator' which acts like the workspace_buttons.
It is now possible to configure i3bar to hide the
workspace buttons and keep showing the binding mode indicator.
This should make the hide workspace buttons configuration
more convenient for those who are heavily using binding
modes.
Default value for binding_mode_indicator is true.
Add debuglog command that takes toggle|on|off. Add get_debug_logging()
to be able to toggle. Make t/187-commands-parser.t expect 'debuglog'.
Document the debuglog command in userguide.
Add shmlog command that takes <size>|toggle|on|off. Separate logbuffer
management into open_logbuffer() and close_logbuffer(). Make
t/187-commands-parser.t expect 'shmlog'. Add update_shmlog_atom() to
update the SHMLOG_PATH. Document the shmlog command in userguide.
The hidden_state and mode of each i3bar instance can now be controlled from within i3.
Therefore, two new i3 command were introduced:
_
bar hidden_state show|hide|toggle [<bar_id>]
show: always show the bar
hide: normal hide mode
toggle: toggle between show and hide (individually for each bar)
_
bar mode dock|hide|invisible|toggle [<bar_id>]
hide,dock: like before
invisible: always keep the bar hidden
toggle: toggle between dock and hide (individually for each bar)
This patch introduces a hidden_state ("hidden_state hide|show") in the
barconfig, which indicates the current hidden_state of each i3bar
instance. It only affects the bar when in hide mode. Additionally, a new
invisible mode was introduced. In order to change the hidden_state or
mode of the bar from i3, a barconfig-update event was introduced, for
which a bar can subscribe and the bar then gets notified about the
currently set hidden_state and mode in its barconfig.
For convenience, an id field ("id <bar_id>") was added to the barconfig, where one can
set the desired id for the corresponding bar. If the id is not specified, i3 will
deterministically choose an id; otherwise, with the previous random approach for finding
a new id, which is actually not shared with i3bar, as it would determine its id on
startup, the event-subscription would be destroyed on reload. Still, this issue remains
when manually changing the bar_id in the config and then reloading.
fixes#833, #651
This patch adds the following features:
1) Configure a color of the separator via config. It is done like
bar {
colors {
separator #000000
}
}
2) A block can have an integer entry "separator_block_width" which
sets the width of the gap which would follow after the current block.
3) A block can have a boolean entry "separator" and if it is set
to false, then the drawing of the separating line would be disabled.
rr-