Outputs may disappear momentarily and come back later.
To prevent i3 from exit when no output is available momentarily, add a timeout delay_exit_on_zero_displays.
Introduce a config directive "show_marks [yes|no]" to en- or disable drawing marks on window decorations.
To not change the look & feel of existing configurations, the default is "no".
This introduces a "separator_symbol" property for the i3bar configuration.
If set, the specified string will be used as a separator instead of a vertical line. Since it is an optional configuration, complete backwards compatibility is given.
fixes#1472
Add `markup` to the i3bar protocol as a block member.
This is a string that determines how the block should be parsed as
markup. "pango" indicates the block should be parsed as Pango markup.
"none" indicates the block should not be parsed as markup.
Parse text within workspace buttons and the i3bar statusline as Pango
markup. This lets people specify things like font weight, text color,
background color, font size, and font family in the text of i3bar.
fixes#1468
Add the `--whole-window` switch for mouse bindings. This switch controls
what part of the container the pointer must be over to trigger a mouse
binding. The default is to only trigger mouse bindings over the
titlebars. With this switch, a mouse binding will be triggered over the
main part of the window as well.
This is a breaking change to the previous behavior, which would trigger
a mouse binding with a modifier over any part of the window.
fixes#1429
Send the affected workspace in the "current" property for each workspace
event for any type of workspace event that affects a particular
workspace.
fixes#1411
Rather than just toggling the fullscreen modes, allow to set them
directly with:
fullscreen enable|toggle [global]
fullscreen disable
For compatibility, retain the previous command and its toggling behavior:
fullscreen [global]
fixes#1120
When dumping a binding, as is done during the binding event, check
symbol for NULL. If it is, dump json null. This prevents a crash when
running a binding that was configured with bindcode.
fixes#1379
The binding event will be triggered when a binding is run as a result of
some a user action. The binding event has the following properties:
change: (str) Currently this will only be "run" but may be expanded in
the future. Included for consistency with other events.
binding: (map) the serialized binding
The "binding" member will have these properties:
input_type: (str) either "keyboard" or "mouse"
input_code: (int) the xcb keycode of the keyboard binding if it was
provided or the mouse button if it is a mouse binding.
symbol: (str) the string representation of the input code
command: (str) the bound command
mods: (list of str) a list of the modifiers that were pressed as string
symbols
fixes#1210
Replace the XDummy script with Xephyr. This is done because of some
changes in the Xorg server that make XDummy difficult to use.
Rename library internal variables and function names to replace "xdummy"
with "xserver" to show this change (except for renaming the package and
lib file for better git history).
Rename the switch `--keep-xdummy-output` to `--keep-xserver-output`.
This switch should now be rarely used because Xephyr requires less set
up.
Replace "xdummy" with "xephyr" in comments and utility help
information. Update docs to show the new dependency.
fixes#1367
When a named workspace (i.e., a workspace that has a name that does not
begin with text that can be parsed as an integer greater than or equal
to zero) is represented by the ipc as a workspace json object such as
can be queried with `i3-msg -t get_workspaces`, set the num property to
-1 instead of json null.
This is for convenience of ipc consumers using type-constrained
languages such as C which have difficulty cleanly expressing nullable
integers.
fixes#1368
Users can specify a command to run when a button was pressed on i3bar to
override the default behavior. Currently only the mouse wheel buttons
are supported. This is useful for disabling the scroll wheel action or
running scripts that implement custom behavior for these buttons.
Example:
bar {
wheel_up_cmd nop
wheel_down_cmd exec ~/.i3/scripts/custom_wheel_down
}
fixes#1104
A configured mouse binding (for example `bindsym button3 kill`) runs
its command when the mouse button is pressed over parts of a container.
If the binding has no modifer, it will only run when the button is
clicked on the window titlebar.
Otherwise if the binding has a modifier, it will run over the titlebar
or any part of the contained window.
fixes#558
In the section "Exiting i3", document the confirmation dialog (nagbar)
that will show when the user presses the default keys to exit in such a
way to hint that it is configurable.
This patch adds a new configuration option "mouse_warping [output|none]".
When mouse warping is disabled, mouse cursor does not jump to middle of current
screen when changing workspaces between multiple outputs. This introduces a
"special" cursor state, where focus is in one window and cursor on another.
Useful for eg. scrolling a web page with mouse wheel while typing into another
window on keyboard.
Implement the configuration option within the bar config directive for
custom workspace numbers with the directive `strip_workspace_numbers
yes`.
This directive strips the workspace name of the number prefix and
delimiter. When the workspace name consists only of the number, it will
default to show the number.
For example:
* "2:5" -> "5"
* "4:$" -> "$"
* "8" -> "8"
This allows customization of i3bar for alternate ordering of workspaces
which has a legitimate use for alternate keyboard layouts such as
Dvorak.
fixes#1131
The fullscreen_mode event is a window with the "change" property set to
"fullscreen_mode". This event should be emitted whenever a window enters
or exits fullscreen mode.
This event can be used to turn off dpms off when a window is fullscreen
or display the fullscreen container name in the status line for
instance.
Send all the options in the bar block on the barconfig_update event.
This will eventually allow for dynamically updating bar colors with the
`reload` command.
Add a link to the new JavaScript, Python, and Lua ipc libraries.
Add notice that the older Python libraries are not maintained.
Sort the list alphabetically.
This patch fixes ticket #1168 to extend the window IPC event mechanism
to send IPC events for window focus and title changes. The newly added
window events use the same format as the already established "new"
event.
Specifically this patch:
* Moves the ipc_send_window_event() function from src/manage.c into
src/ipc.c and adds an argument for the change property of the event
* Updates src/manage.c to use the new function signature. To ensure
that the "new" event does not send the same event data as the
"focus" event, setting focus now happens after the "new" event
has been sent
* Adds IPC focus event notification to src/x.c. To workaround a problem
during window close when accessing the window name, a function has been
added to query whether a window is actually attached to its parent. To
avoid obsolete focus notification, a new field has been added to keep
track of the focus without any interference by the click handling
* Adds IPC title event notification to src/handlers.c. To avoid
obsolete title notification, a function has been added to determine
whether a window title has actually changed
* Updates the IPC documentation to include the new events
* Updates testcases/t/205-ipc-windows.t to include the "focus" event
in order to ensure the correct event sequence
* Adds two new unit tests, b/testcases/t/219-ipc-window-focus.t and
b/testcases/t/220-ipc-window-title.t to ensure proper "focus" and
"title" events
Add a link to https://github.com/acrisci/i3-ipc which is a new ipc
library in the design phase of development. When it is stable, it will
provide bindings to many high-level scripting languages with
GObject-introspection.
This project aims to replace the unmaintained Python library and offer
an ipc library in new languages such as Lua and JavaScript.
The user's guide talks about renaming workspaces, for example to
"2: mail", and a sample key binding for use with i3-input is supplied.
However, this example lacks proper quoting for the format string, so
that when workspace name with a space in it, like "2: mail", is given,
the current workspace is renamed to "2:". This patch adds proper
quoting.
i3 current behavior hides the binding mode indicator when
workspace buttons are disabled.
This patch adds a new configuration for i3bar called
'binding_mode_indicator' which acts like the workspace_buttons.
It is now possible to configure i3bar to hide the
workspace buttons and keep showing the binding mode indicator.
This should make the hide workspace buttons configuration
more convenient for those who are heavily using binding
modes.
Default value for binding_mode_indicator is true.
Add debuglog command that takes toggle|on|off. Add get_debug_logging()
to be able to toggle. Make t/187-commands-parser.t expect 'debuglog'.
Document the debuglog command in userguide.
• the section heading needs === instead of ==
• better title
• explain what shared memory logging does and where to find more
information
• add syntax section
• improve examples
• clarify that shmlog <size> discards the current log
Add shmlog command that takes <size>|toggle|on|off. Separate logbuffer
management into open_logbuffer() and close_logbuffer(). Make
t/187-commands-parser.t expect 'shmlog'. Add update_shmlog_atom() to
update the SHMLOG_PATH. Document the shmlog command in userguide.
The hidden_state and mode of each i3bar instance can now be controlled from within i3.
Therefore, two new i3 command were introduced:
_
bar hidden_state show|hide|toggle [<bar_id>]
show: always show the bar
hide: normal hide mode
toggle: toggle between show and hide (individually for each bar)
_
bar mode dock|hide|invisible|toggle [<bar_id>]
hide,dock: like before
invisible: always keep the bar hidden
toggle: toggle between dock and hide (individually for each bar)
This patch introduces a hidden_state ("hidden_state hide|show") in the
barconfig, which indicates the current hidden_state of each i3bar
instance. It only affects the bar when in hide mode. Additionally, a new
invisible mode was introduced. In order to change the hidden_state or
mode of the bar from i3, a barconfig-update event was introduced, for
which a bar can subscribe and the bar then gets notified about the
currently set hidden_state and mode in its barconfig.
For convenience, an id field ("id <bar_id>") was added to the barconfig, where one can
set the desired id for the corresponding bar. If the id is not specified, i3 will
deterministically choose an id; otherwise, with the previous random approach for finding
a new id, which is actually not shared with i3bar, as it would determine its id on
startup, the event-subscription would be destroyed on reload. Still, this issue remains
when manually changing the bar_id in the config and then reloading.
fixes#833, #651
If the statusline generator (i.e. i3status) specifies click_events:true
in the protocol header, i3bar will write a JSON array on it's stdin
notifying it if the user clicks on a block.
The exact protocol is documented in docs/i3bar-protocol.
_NET_WM_STATE_DEMANDS_ATTENTION indicates that some action in or with
the window happened. It's a weaker hint than urgency flag of WM_HINTS,
but some applications and almost all Qt applications use it instead of
WM_HINTS' urgency flag (one example is Skype).
With this change, min_width can either be an integer (as usual), or a
string. In the latter case, the width of the text given by min_width
determines the minimum width of the block. This way one does not have to
figure out a minimum width by trial and error, only to do it again every
time the font is changed.
Added new event id (I3_IPC_EVENT_WINDOW) so that a an IPC client can
subscribe to events on windows. Added a basic window event that gets
triggered when a window gets successfully reparented. This new event
also dumps the container data, so that IPC clients can get the initial
window name. IPC clients wishing to see window events should subscribe
to 'window'.
This patch adds the following features:
1) Configure a color of the separator via config. It is done like
bar {
colors {
separator #000000
}
}
2) A block can have an integer entry "separator_block_width" which
sets the width of the gap which would follow after the current block.
3) A block can have a boolean entry "separator" and if it is set
to false, then the drawing of the separating line would be disabled.
Add a `current' and `old' properties to the `focus' change type,
containing the current and old workspace respectively. These additions
are not necessary anywhere else because `focus' is always triggered when
changing ws.
The corresponding command is 'rename workspace to <name>'. As a side-effect
this fixes the command 'rename workspace 1 to to'.
Signed-off-by: Michael Walle <michael@walle.cc>
With this commit, the default behavior is to display popups while there
is a fullscreen application only if the popup belongs to that
application (as determined by the WM_TRANSIENT_FOR hint which
applications have to set properly).
fixes#663
If there is a client with an urgency hint on another workspace and
switching to this workspace would cause the urgency to be reset (by
moving the focusing to the client), delay the reset by some time. This
gives the user the chance to see it.
This commit adds the possibility to configure the urgency delay timer
duration using the 'force_display_urgency_hint' directive. Also,
documentation and a testcase was added to allow for automated checks of
the intended behavior.
fixes#482
this implements both the "move container to workspace back_and_forth" command
and movements to the same workspace when auto_back_and_forth is set.
it includes documentation and test suite additions by michael.
it also simplifies the workspace_show_by_name function (making use of
workspace_get accepting NULL pointers).
Introducing a new event to subscribe called mode. It's fired up
when i3 changes binding mode (like switching from default to resize).
IPC guide adjusted also.
This is useful for third-party scripts which require certain features
and want to error out cleanly when they are run with an old i3 version.
Additionally, i3 --version might be different from what’s actually
running (an old version of the binary), so i3-msg -t get_version will be
the best way to figure out the i3 version you are actually running from
this commit on.
With this commit, the "default" layout is replaced by the splith and
splitv layouts. splith is equivalent to default with orientation
horizontal and splitv is equivalent to default with orientation
vertical.
The "split h" and "split v" commands continue to work as before, they
split the current container and you will end up in a split container
with layout splith (after "split h") or splitv (after "split v").
To change a splith container into a splitv container, use either "layout
splitv" or "layout toggle split". The latter command is used in the
default config as mod+l (previously "layout default"). In case you have
"layout default" in your config file, it is recommended to just replace
it by "layout toggle split", which will work as "layout default" did
before when pressing it once, but toggle between horizontal/vertical
when pressing it repeatedly.
The rationale behind this commit is that it’s cleaner to have all
parameters that influence how windows are rendered in the layout itself
rather than having a special parameter in combination with only one
layout. This enables us to change existing split containers in all cases
without breaking existing features (see ticket #464). Also, users should
feel more confident about whether they are actually splitting or just
changing an existing split container now.
As a nice side-effect, this commit brings back the "layout toggle"
feature we once had in i3 version 3 (see the userguide).
AFAIK, it is safe to use in-place restart to upgrade into versions
after this commit (switching to an older version will break your layout,
though).
Fixes#464
Currently it supports the following options:
"oldest": match the first window that triggered an urgent event
"latest": match the last window that triggered an urgent event
This re-introduces borders around the workspace buttons in i3bar.
No additional pixels will be consumed (you will not lose any space for your
windows).
With this commit, i3 will now use either $XDG_RUNTIME_DIR/i3 (XDG_RUNTIME_DIR
is only writable by the user, so this is not a problem) or a secure temporary
location in /tmp, following the pattern /tmp/i3-<user>.XXXXXX
i3bar previously used get_colorpixel on strings without the leading # (ff0000
instead of #ff0000). Since it uses libi3’s get_colorpixel now we needed to
update a few places.
Michael Stapelberg