10d3281b0f
remove/shorten a lot of debugging messages
...
Some of them are useless nowadays, others very unlikely to be a problem.
Those which might still be interesting somewhen in the future are just
commented out.
2011-10-23 00:15:13 +01:00
42d355f2b7
normalize modelines/headers across src/*.c
2011-10-22 23:40:02 +01:00
753d67fb64
migration from exec i3bar to bar config: i3 substitutes exec with a bar block, shows nagbar
2011-10-22 16:33:00 +01:00
9b84348201
Bugfix: fix off by one when copying the hex colorcode (Thanks fernandotcl)
2011-10-21 23:22:48 +01:00
77961ad9c8
cfgparse: Don’t use asprintf when parsing hex colors
2011-10-21 23:09:57 +01:00
3baeeb1834
Bugfix: properly transition in and out of the COLOR_COND state (Thanks fernandotcl)
2011-10-21 22:58:53 +01:00
caee0a0fda
cfgparse: eliminate absolute states, use yy_push_state/yy_pop_state
...
This fixes a problem with workspace assignments.
I tested i3 -C with three user configs (Thanks SardemFF7, julien, xeen)
and did not notice any problems.
2011-10-20 22:38:46 +01:00
12d866e4f6
Don’t start i3-nagbar when using -C to validate the config
2011-10-20 22:25:59 +01:00
230b238870
Actually start i3bar instances for each configured bar
2011-10-20 19:03:40 +01:00
ad0f13a0a9
Clean bars before reloading the config (+test)
...
While the configuration gets updated in i3, the i3bar processes will not pick
up these changes. We have to think about a good way to do that.
2011-10-20 18:47:09 +01:00
15bface10d
Create different IDs for each bar (+test)
2011-10-19 19:57:39 +01:00
063b124e35
Implement parsing bar {} config blocks
2011-10-18 22:16:04 +01:00
149b05aacf
ipc: when requesting the bar config without a payload, return an array of available bar IDs
2011-10-18 22:12:46 +01:00
e3cbdea1fc
Bugfix: Correctly close the colors map in the IPC bar config reply
2011-10-18 22:11:44 +01:00
c2c6ca25d5
Make the barconfig list a TAILQ
2011-10-18 22:11:27 +01:00
24ede1c834
add an IPC request to get the bar configuration (by ID)
2011-10-18 19:05:49 +01:00
4898f78e5e
add a data structure for 'bar' configuration
2011-10-18 19:05:49 +01:00
9d67ae2202
Focus new window only if it is on a visible workspace on the current focused output.
2011-10-18 18:56:39 +01:00
a506e59b3c
Bugfix: Fix segfault when starting i3 (Thanks pnutzh4x0r)
2011-10-18 18:47:07 +01:00
f09d9a4c37
log: use localtime_r instead of localtime
...
localtime_r does not have the side-effect of behaving like it called tzset(),
in particular it will save one stat(/etc/localtime) syscall. This is not a big
deal, but it makes the strace output cleaner and thus more useful :).
2011-10-18 18:32:47 +01:00
178be03fa6
Implement 'workspace back_and_forth' (Patch by Michael Walle)
2011-10-17 23:17:56 +01:00
914ca6cfe7
Bugfix: Use _exit in forking to avoid calling the libev cleanup handler (Thanks xeen)
2011-10-15 16:56:47 +01:00
32b97745ec
Don’t call ev_destroy_loop with ev < 4 in atexit (Thanks xeen)
2011-10-15 16:56:32 +01:00
5f52c78aa0
Change the root window cursor to 'watch' during startups
2011-10-10 15:54:18 +01:00
2ad4fbb34a
startup: delete the startup sequence upon completion, make the timeout complete it
2011-10-10 15:54:18 +01:00
997a539a8a
Implement timeouts for startup notifications
2011-10-10 15:54:17 +01:00
6ac098a45e
support _NET_STARTUP_ID on the client leader window
...
(necessary for GIMP, geeqie, …)
2011-10-10 15:54:17 +01:00
4204b8e2b0
Get the _NET_STARTUP_ID in manage_window, get the corresponding workspace
2011-10-10 15:54:17 +01:00
499d89bdb0
Keep track of startup notifications in a TAILQ, save workspace
2011-10-10 15:54:17 +01:00
f4f4d782bb
implement a startup monitor, move code to src/startup.c
2011-10-10 15:54:17 +01:00
c812cdcf9a
make handle_client_message not return anything
...
The function returned an int for historical reasons.
2011-10-10 15:54:17 +01:00
d1d4f39f9e
save the last timestamp received by X11 in last_timestamp
...
We need it for startup notifications (to generate a unique id)
Conflicts:
include/i3.h
src/main.c
2011-10-10 15:54:17 +01:00
b9db72dc8a
Implement support for startup notifications
...
This only sets up startup notifications for the 'exec' commands and directives.
Monitoring startups follows later.
2011-10-10 15:54:17 +01:00
2a29d9c2c1
Make conn_screen available outside of main()
...
Will be used in other parts of the code for startup notification
2011-10-10 15:54:17 +01:00
0f74f9b921
remove left-over type definition for mode_info
2011-10-09 18:25:21 +01:00
18991a65c7
log WM_NAME (non-utf-8 window titles)
2011-10-09 14:45:34 +01:00
29c185dd0b
Move fake_configure_notify to libi3
2011-10-09 13:40:15 +01:00
658bf5adff
Bugfix: Warp pointer to the correct window when using the 'focus' command
...
Comment in the code makes the fix clear, I think.
Steps to reproduce the issue:
1) On the right monitor, open two terminals (h-split workspace)
2) 'i3 mark foo' on the right terminal
3) Focus the left terminal
4) Switch to the left monitor
5) i3 '[con_mark="foo"] focus'
6) the left window will contain the pointer (and is focused for a short period
of time, or even permanently due to race conditions)
2011-10-03 21:54:36 +01:00
1eab86b916
add "move workspace next" and "move workspace prev"
...
some factorization would be better here, however I don't really know my
way around bison
2011-10-02 22:03:47 +01:00
b2ad9a77c8
rename the internal function to _workspace_show, add a comment to workspace_show_by_name
2011-10-02 22:03:16 +01:00
92cc4494aa
refactor workspace_show and friends
2011-10-02 21:57:00 +01:00
b755397687
Make i3 send arguments as command to a running i3 instance (like i3-msg)
...
From i3 --help:
If you pass plain text arguments, i3 will interpret them as a command
to send to a currently running i3 (like i3-msg). This allows you to
use nice and logical commands, such as:
i3 border none
i3 floating toggle
i3 kill window
2011-10-02 19:20:43 +01:00
4243a4053e
Cleanup i3 --help
2011-10-02 18:55:15 +01:00
046cf99585
Move ipc_send_message and ipc_recv_message to libi3
...
Make i3-msg and src/ipc.c use it
2011-10-02 18:33:36 +01:00
501dc36b98
move sstrdup, scalloc, smalloc, srealloc to libi3, improve error messages
2011-10-02 18:09:30 +01:00
23796ea900
Implement i3 --get-socketpath, useful for IPC scripts
...
In order to not depend on X11 just for getting the socket paths, scripts or
other programs can now use i3 --get-socketpath. Since i3 must be present on the
computer anyways, this saves one dependency :).
2011-10-02 16:12:10 +01:00
679bceccc4
remove obsolete comment
2011-10-02 13:18:12 +01:00
0482dc7546
Merge branch 'master' into next
2011-10-01 17:44:46 +01:00
8adcf3e5d1
set close-on-exec flag on errorlogfile
...
Make sure the file descriptor is closed within the child after forking.
Signed-off-by: Michael Walle <michael@walle.cc>
2011-10-01 17:44:22 +01:00
3629934b0a
Check for PCRE version and disable PCRE_UCP for <= 8.10
2011-09-30 20:31:32 +01:00
Michael Stapelberg