d490bae8a2
Close empty workspaces if they're not visible.
...
Previously, we'd only close an empty workspace when we moved away
from it. Now we also close it when the last client exits, as long
as that workspace is not visible anymore.
2011-10-24 00:12:14 +01:00
f4469eee0b
get rid of xcb.c in all i3-* tools
...
open_input_window was slightly different for each of them, so it made no sense
to generalize it (then we would end up with a thin and useless wrapper).
2011-10-23 23:20:57 +01:00
a58018cf66
Add libi3/load_font, use it everywhere
...
…except for i3bar, which needs slightly more information about the font
2011-10-23 22:37:11 +01:00
6d01d37b03
remove unused cached_fonts TAILQ
2011-10-23 22:03:20 +01:00
8da6049ca9
Actually make load_font only fallback if 'fallback' is true
2011-10-23 22:02:11 +01:00
29f9f8c090
Fix tests: s/i3bar/bar {/ and hash prefix for color codes in GET_BAR_CONFIG
2011-10-23 21:51:43 +01:00
3e7f941b83
Fix comment in run_assignments (Thanks xeen)
2011-10-23 21:45:12 +01:00
91134f75c0
Move get_mod_mask to libi3, use it in i3 and i3-config-wizard
...
Also, the API changed a bit. There are two functions now, both assume you
already got the keysyms (which is the case for i3 and i3-config-wizard),
one gets the modifier mapping for you (aio_get_mod_mask_for) while the other
assumes you also got that. No roundtrips are required for the latter.
2011-10-23 21:26:15 +01:00
a512b99a51
Introduce --get_socketpath and --force_xinerama as synonyms for --get-socketpath and --force-xinerama
2011-10-23 19:41:40 +01:00
c2d04116d4
i3-input: Remove unused get_mod_mask from xcb.c
2011-10-23 19:37:28 +01:00
05d097bb36
i3-input: fix handling of Mode_switch (makes special characters work again)
...
This seems to have only worked before in certain settings, where the modifiers
were configured in a way that it matched by chance…
2011-10-23 19:34:48 +01:00
7c04e23ab7
i3-input: Bugfix: font must be dynamically allocated, we FREE it later
2011-10-23 19:34:21 +01:00
7d487b0314
remove unused get_mod_mask from i3-config-wizard/xcb.{c,h}
2011-10-23 18:33:21 +01:00
6dc6ba11fc
Eliminate xcb_change_gc_single everywhere with C99
2011-10-23 18:06:25 +01:00
9eda7fb6fb
move strndup to libi3
2011-10-23 18:02:01 +01:00
78fea8e1fb
i3-nagbar: eliminate xcb_change_gc_single with C99
2011-10-23 17:55:58 +01:00
ada4857ad2
Fix colors in i3bar (Thanks julien)
...
i3bar previously used get_colorpixel on strings without the leading # (ff0000
instead of #ff0000). Since it uses libi3’s get_colorpixel now we needed to
update a few places.
2011-10-23 17:48:44 +01:00
91ae73b1f6
i3-config-wizard: eliminate xcb_change_gc_single with C99
2011-10-23 17:45:40 +01:00
cb9bbcfccf
Move get_colorpixel to libi3, use it everywhere else
2011-10-23 17:38:21 +01:00
0086bcb2b4
i3-input: eliminate xcb_change_gc_single usage with C99
2011-10-23 17:26:06 +01:00
4f57d49318
add libi3/ipc_connect, use it in i3-config-wizard, i3-input, i3bar
2011-10-23 17:18:14 +01:00
4539546f48
debian: update package descriptions
2011-10-23 17:01:56 +01:00
d8eb4f3fdc
debian: use ${perl:Depends}, remove perl from build-deps, update recommends
...
We can drop the perl module recommends since i3-wsbar no longer ships with i3.
2011-10-23 16:53:16 +01:00
31cb3dda8d
cfgparse: use different literal strings for ambiguous keywords in bar context
2011-10-23 16:41:23 +01:00
499d4c11e0
i3bar: make len an integer for %.*s in sasprintf
2011-10-23 16:39:39 +01:00
96f67a53a5
i3bar: check exit code of pipe()
2011-10-23 14:31:43 +01:00
5ec5a07dd2
docs/userguide: use the correct color keywords (Thanks Atsutane)
2011-10-23 13:17:32 +01:00
9d15a00ba8
introduce sasprintf() in libi3, use it everywhere
2011-10-23 13:16:56 +01:00
14abafb3c8
makefile: correctly depend on libi3/*.c to recompile libi3 when necessary
2011-10-23 13:16:39 +01:00
886aabe826
add libi3/libi3.a to .gitignore
2011-10-23 13:16:26 +01:00
d87b0f13a0
i3-input: use IPC functions from libi3
2011-10-23 13:15:20 +01:00
4ddc32f8ee
i3-config-wizard: use IPC functions from libi3
2011-10-23 13:12:52 +01:00
41551178a8
i3bar: makefile: correctly depend on libi3
2011-10-23 12:10:20 +01:00
620b192e90
debian: raise dependency on debhelper
2011-10-23 12:02:03 +01:00
82c8a77e7d
lower dependency on libstartup-notification, fix build-dep in debian/control
2011-10-23 12:01:22 +01:00
98baa222f7
remove obsolete TERM_EMU build option
2011-10-23 12:00:56 +01:00
6927e899e6
makefile: use /bin/echo to get consistent results for the escaping
...
On the buildbot slave machine, we have a different version of zsh which seems
to handle this slightly different with the built-in echo…
2011-10-23 11:31:55 +01:00
b8df07d8cf
Bump dh compat to 7, simplify debian/rules.
...
Also added hardening flags. We can't enable PIE because i3bar seems
to have problems with that. We also shouldn't enable bindnow, as it
the startup performance penalty (though probably not too bad) might
not be acceptable for i3-msg and i3-input.
2011-10-23 11:07:22 +01:00
10d3281b0f
remove/shorten a lot of debugging messages
...
Some of them are useless nowadays, others very unlikely to be a problem.
Those which might still be interesting somewhen in the future are just
commented out.
2011-10-23 00:15:13 +01:00
42d355f2b7
normalize modelines/headers across src/*.c
2011-10-22 23:40:02 +01:00
0298c72802
Bugfix: i3.config: status_command, not status_line (Thanks eeemsi)
2011-10-22 18:28:11 +01:00
a3268248eb
update manpage for 'bar' config (Thanks eeemsi)
2011-10-22 18:23:29 +01:00
d75560981e
Merge branch 'bar-config' into next
2011-10-22 17:02:49 +01:00
753d67fb64
migration from exec i3bar to bar config: i3 substitutes exec with a bar block, shows nagbar
2011-10-22 16:33:00 +01:00
d7eba46de5
i3-nagbar: Implement -t warning, makes colors yellow(ish)
2011-10-22 16:16:06 +01:00
409dcf44db
i3-migrate-config-to-v4: generate a bar {} block instead of exec i3bar
2011-10-22 15:24:18 +01:00
95c2e86db9
i3bar: delete include/queue.h, use i3’s copy
2011-10-22 15:08:24 +01:00
bc2c63d4ed
i3bar: change default font to the i3 default one
2011-10-22 15:00:31 +01:00
3ee8bd502d
i3bar: change default colors to fit the i3 look & feel
...
The new default looks like this (like in docs/userguide):
colors {
background #000000
statusline #ffffff
focused_workspace #ffffff #285577
active_workspace #888888 #222222
inactive_workspace #888888 #222222
urgent_workspace #ffffff #900000
}
If you want to go back to the previous colors, use:
colors {
background #000000
statusline #ffffff
focused_workspace #ffffff #480000
active_workspace #ffffff #480000
inactive_workspace #ffffff #240000
urgent_workspace #ffffff #002400
}
2011-10-22 12:34:06 +01:00
9b84348201
Bugfix: fix off by one when copying the hex colorcode (Thanks fernandotcl)
2011-10-21 23:22:48 +01:00
Fernando Tarlá Cardoso Lemos