- Having both parse_configuration and parse_file is excessive now
- We detect if we are parsing only by checking if conn is NULL, not with
use_nagbar
- font.pattern needs to be set to NULL because it is freed in
free_font()
Fixes#3660
Fixes for undefined behaviour on signed shift
Change literal 1 to unsigned to allow safe bitshift of 31.
Caught by cppcheck.
Make 0xFF unsigned to prevent a left shift into signed bit.
Spotted by @orestisf1993
copy has been used before this point - so it is too late to be concerned
about a NULL pointer now.
This is OK as sstrdup() calls err() on NULL return from the underlying
strdup() call.
Raised by cppcheck.
strlen already assumes that the string is NULL-terminated.
Like in https://github.com/i3/i3status/pull/312 but for whatever reason
gcc didn't warn about this here.
These are the changes that clang-format 6.0.1 makes to the codebase that
clang-format-3.8 doesn't change back.
Useful for those that use a more recent version of clang-format in their
local machines.
This change only affects clients that are subscribed to events, which
should be the main cause of our problems.
In the common case (no buffered data) the behaviour doesn't change at
all: the message is sent directly, no ev_io / ev_timeout callback is
enabled. Once a write to a client's socket is not completed fully
(returns with EAGAIN error), we put the message in the tail of a queue
and init an ev_io callback and a corresponding timer. If the timer is
triggered first, the socket is closed and the client connection is
removed. If the socket becomes writeable before the timeout we either
reset the timer if we couldn't push all the buffered data or completely
remove it if everything was pushed.
We could also replace ipc_send_message() for all client connections in
i3, not just those subscribed to events.
Furthermore, we could limit the amount of messages stored and increase
the timeout (or use multiple timeouts): eg it's ok if a client is not
reading for 10 seconds and we are only holding 5KB of messages for them
but it is not ok if they are inactive for 5 seconds and we have 30MB of
messages held.
Closes#2999Closes#2539
Using 'default:' cases can hide logical errors which would lead to i3
crashes for users. With this change the compiler will print a warning
when a case is not handled. For example, if I add a new value in the
Font.type enum:
../../i3/libi3/font.c: In function ‘draw_text’:
../../i3/libi3/font.c:378:5: warning: enumeration value ‘NEWFONT’ not handled in switch [-Wswitch]
switch (savedFont->type) {
^~~~~~
For opaque text, SOURCE is not any different from OVER. However, when
drawing color glyphs (which consist of RGBA pixels instead of strokes)
SOURCE's handling of alpha is not what we want.
I stumbled across this because cairo 1.15.8 seems to clear the surface
before drawing color emoji if the operator is SOURCE, deleting every-
thing drawn before. Arguably, the area outside the glyph bounds should
not be touched, but even if this is a cairo bug the problem of alpha
within the glyph remains.
If conn == NULL or display == NULL, init_dpi() jumps to init_dpi_end
before (declaring and) initializing resource. In init_dpi_end, there
is a free(resource) call conditionally on resource != NULL, so this
may lead to a bogus free. Found by clang -Wsometimes-uninitialized.
Including config.h is necessary to get e.g. the _GNU_SOURCE define and
any other definitions that autoconf declares. Hence, config.h needs to
be included as the first header in each file.
This is done either via:
1. Including "common.h" (i3bar)
2. Including "libi3.h"
3. Including "all.h" (i3)
4. Including <config.h> directly
Also remove now-unused I3__FILE__, add copyright/license statement
where missing and switch include/all.h to #pragma once.
This commit probably comes as a surprise to some, given that one of i3’s
explicitly stated goals used to be “Do not use programs such as
autoconf/automake for configuration and creating unreadable/broken makefiles”.
I phrased this goal over 7 years ago, based largely on a grudge that I
inherited, which — as I’ve realized in the meantime — was largely held against
FOSS in general, and not actually nuanced criticism of autotools.
In the meantime, I have come to realize that the knee-jerk reaction of “I could
do this better!” (i.e. writing our own build system in this particular case) is
usually misguided, and nowadays I strongly suggest trying hard to fix the
existing system for the benefit of all existing and future users.
Further, I recently got to experience the other side of the coin, as I packaged
a new version of FreeRADIUS for Debian, which at the time of writing used
autoconf in combination with boilermake, a custom make-based build system that
only FreeRADIUS uses. Understanding the build system enough to fix issues and
enable parallel compilation took me an entire day. That time is time which
potentially every downstream maintainer needs to invest, and the resulting
knowledge cannot be applied to any other project.
Hence, I believe it’s a good idea switch i3 to autotools. Yes, it might be that
particular features were easier to implement/understand in our custom
Makefiles, and there might be individuals who have an easier time reading
through our custom Makefiles than learning autotools. All of these
considerations are outweighed by the benefits we get from using the same build
system as literally thousands of other FOSS software packages.
Aside from these somewhat philosophical considerations, there’s also practical
improvements which this change brings us. See the “changes” section below.
┌──────────────────────────────────────────────────────────────────────────────┐
│ new workflow │
└──────────────────────────────────────────────────────────────────────────────┘
You can now build i3 like you build any other software package which uses
autotools. Here’s a memory refresher:
autoreconf -fi
mkdir -p build && cd build
../configure
make -j8
(The autoreconf -fi step is unnecessary if you are building from a release
tarball, but shouldn’t hurt either.)
┌──────────────────────────────────────────────────────────────────────────────┐
│ recommended reading │
└──────────────────────────────────────────────────────────────────────────────┘
I very much recommend reading “A Practitioner's Guide to GNU Autoconf,
Automake, and Libtool” by John Calcote (https://www.nostarch.com/autotools.htm).
That book is from 2010 and, AFAICT, is the most up to date comprehensive
description of autotools. Do not read older documentation. In particular, if a
document you’re reading mentions configure.in (deprecated filename) or
recursive make (now considered harmful), it’s likely outdated.
┌──────────────────────────────────────────────────────────────────────────────┐
│ changes │
└──────────────────────────────────────────────────────────────────────────────┘
This commit implements the following new functionality/changes in behavior:
• We use the AX_ENABLE_BUILDDIR macro to enforce builds happening in a separate
directory. This is a prerequisite for the AX_EXTEND_SRCDIR macro and building
in a separate directory is common practice anyway. In case this causes any
trouble when packaging i3 for your distribution, please let me know.
• “make check” runs the i3 testsuite.
You can still use ./testcases/complete-run.pl to get the interactive progress
output.
• “make distcheck” (runs testsuite on “make dist” result, tiny bit quicker
feedback cycle than waiting for the travis build to catch the issue).
• “make uninstall” (occasionally requested by users who compile from source)
• “make” will build manpages/docs by default if the tools are installed.
Conversely, manpages/docs are not tried to be built for users who don’t want
to install all these dependencies to get started hacking on i3.
• non-release builds will enable address sanitizer by default. Use the
--disable-sanitizers configure option to turn off all sanitizers, and see
--help for available sanitizers.
• Support for pre-compiled headers (PCH) has been dropped for now in the
interest of simplicitly. Maybe we can re-add it later.
• coverage reports are now generated using “make check-code-coverage”, which
requires specifying --enable-code-coverage when calling configure.
┌──────────────────────────────────────────────────────────────────────────────┐
│ build system feature parity/testing │
└──────────────────────────────────────────────────────────────────────────────┘
In addition to what’s described above, I tested the following features:
• “make install” installs the same files (plus documentation and manpages)
cd i3-old && make install PREFIX=/tmp/inst/old
cd i3-new && ./configure --prefix=/tmp/inst/new
cd /tmp/inst
(cd old && for f in $(find); do [ -e "../new/$f" ] || echo "$f missing"; done)
• make dist generates a tarball which includes the same files
cd i3-old && make dist
cd i3-new/x86_64-pc-linux-gnu && make dist
colordiff -u <(tar tf i3-old/i3-4.12.tar.bz2 | sort) \
<(tar tf i3-new/x86_64-pc-linux-gnu/i3-4.12.tar.gz | sort)
There are some expected differences:
• Some files have been renamed (e.g. the new etc/ and share/ subdirectories)
• Some files will now be generated at build-time, so only their corresponding
.in file is shipped (e.g. testcases/complete-run.pl)
• The generated parser files are shipped in the dist tarball (they only
depend on the parser-specs/* files, not on the target system)
• autotools infrastructure is shipped (e.g. “configure”, “missing”, etc.)
• DLOG and ELOG statements still produce the same file name in logfiles
• Listing source code in gdb still works.
• gdb backtraces contain the i3-<version> path component
• release.sh still works
• version embedding
1. git checkout shows “4.12-136-gf720023 (2016-10-10, branch "autotools")”
2. tarball of a git version shows “4.12-non-git”
3. release tarball shows 4.13
• debug mode is enabled by default for non-release builds
• enabling verbose builds via V=1
┌──────────────────────────────────────────────────────────────────────────────┐
│ speed │
└──────────────────────────────────────────────────────────────────────────────┘
There is no noticeable difference in compilation speed itself (of binaries,
documentation and manpages):
i3-old $ time make all docs mans -j8
make all docs mans -j8 28.92s user 2.15s system 640% cpu 4.852 total
i3-new $ time make -j8
make -j8 27.08s user 1.92s system 620% cpu 4.669 total
In terms of one-time costs:
configuring the build system (../configure) takes about 2.7s on my machine,
generating the build system (autoreconf -fi) takes about 3.1s on my machine.
┌──────────────────────────────────────────────────────────────────────────────┐
│ m4 macros │
└──────────────────────────────────────────────────────────────────────────────┘
All files in m4/ have been copied from the autoconf-archive package in version
b6aeb1988f4b6c78bf39d97b6c4f6e1d594d59b9 and should be updated whenever they
change.
This commit has been tested with autoconf 2.69 and automake 1.15.
We strive to avoid conditional compilation in i3 as much as possible.
cairo and pangocairo have been around long enough in the versions that
we need that it’s time to unconditionally depend on them.
Also update DEPENDS with the last-known-good-versions while at it.
We now build a docker base container based on debian sid (where the very
latest packages are available). That base container is updated once a
month, or whenever travis-build.Dockerfile or debian/control change, but
re-used for subsequent travis runs. While the initial build might take
up to 15 minutes, subsequent builds typically run in a minute or two.
All the different steps that we run on travis are now factored into
separate scripts in the travis/ directory.
Switching to docker should also help with issue #2174.
Jeremy Klotz