I dediced to keep adding /tmp as tmpfs since I was not able to trigger bug
while still using unionfs, so I could not verify whether this mount is still
needed with overlayfs. Mapping /tmp to tmpfs does not harm, so we are on the
save side.
* gnu/system/install.scm (make-cow-store): Mount /gnu/store without additional
read-only bind-mount, since in overlayfs the "lower" level is always
read-only. Add work-dir required by overlayfs. No need to sleep anymore
since now using the mount syscall. [unionfs]: Remove now unused function.
(%installation-services): Update comment.
(installation-os)[file-systems]: Update comment.
Overlayfs is part of the kernel, while unionfs needs FUSE. This also reduces
the size of the initrd by ca. 4.3% (487K).
* gnu/build/linux-boot.scm (mount-root-file-system): Remove optional parameter
"unionfs"; mount using overlayfs instead of unionfs; new directory layout
requied by overlayfs; update documentation.
[mark-as-not-killable]: Remove now unused function
* gnu/system/linux-initrd.scm (file-system-packages): Remove now unused
packages "unionfs-fuse/static" and thus unused related 'if'.
(linux-modules): Replace "fuse" by "overlay".
* gnu/system/vm.scm (operating-system-uuid): Use 2^32 - 1 instead of
2^32 as hash size.
On some 32 bit system (ARM for example), 2^32 exceeds hash max
size (ULONG_MAX = 2^32 - 1).
* gnu/system/examples/lightweight-desktop.tmpl <file-systems>: Add a
UUID for the /boot/efi partition.
* doc/guix.texi (Using the Configuration System): Mention it.
Reported by Roel Janssen <roel@gnu.org>
at <https://lists.gnu.org/archive/html/help-guix/2017-09/msg00094.html>.
* gnu/system/file-systems.scm (file-system->spec): When DEVICE is a
UUID, serialize it in a way that preserves its type.
(spec->file-system): Adjust accordingly.
* gnu/build/file-systems.scm (canonicalize-device-spec): Add case for
when SPEC is 'uuid?'.
* gnu/build/file-systems.scm (mount-file-system): Rename 'spec' to 'fs'
and assume it's a <file-system>.
* gnu/build/linux-boot.scm (boot-system): Assume MOUNTS is a list of
<file-system> and adjust accordingly.
* gnu/build/linux-container.scm (mount-file-systems): Remove
'file-system->spec' call.
* gnu/services/base.scm (file-system-shepherd-service): Add
'spec->file-system' call. Add (gnu system file-systems) to 'modules'.
* gnu/system/linux-initrd.scm (raw-initrd): Use (gnu system
file-systems). Add 'spec->file-system' call for #:mounts.
By referencing guile from the initrd output explicitly, it will be present in
the store when this initrd is used. If the exact guile used within the initrd
isn't present in the store, then after root is switched during the boot
process, loading modules (such as (ice-9 popen)) won't work.
This fixes guix-patches bug #28399, "Fix mysql activation, and add a basic
test".
* gnu/system/linux-initrd.scm (expression->initrd)[builder]: Write out a file
called references in to the initrd output, which includes the store path for
guile.
* gnu/system/uuid.scm (uuid=?): New procedure.
* tests/uuid.scm ("uuid=?"): New test.
* gnu/build/file-systems.scm (partition-uuid-predicate)
(luks-partition-uuid-predicate): Use it instead of 'bytevector=?'.
* gnu/system/vm.scm (qemu-image): When guessing the root-size, use a lower
bound of 20 MiB, otherwise the root file system size is sometimes 0 MiB in
size.
* gnu/system/uuid.scm (%fat32-uuid-rx): New variable.
(string->fat32-uuid): New procedure.
(%uuid-parsers): Add it.
* tests/uuid.scm ("uuid, FAT32, format preserved"): New test.
This makes collisions less likely than when using a label to look up the
partition. See <https://bugs.gnu.org/27735>.
* gnu/system/vm.scm (operating-system-uuid): New procedure.
(system-disk-image): Define 'root-uuid' and use it for the root file
system. Pass it to 'iso9660-image' and 'qemu-image'.
Conceptually a UUID is just a bytevector. However, there's software out
there such as GRUB that relies on the string representation of different
UUID types (e.g., the string representation of DCE UUIDs differs from
that of ISO-9660 UUIDs, even if they are actually bytevectors of the
same length). This new <uuid> record type allows us to preserve
information about the type of UUID so we can eventually convert it to a
string using the right representation.
* gnu/system/uuid.scm (<uuid>): New record type.
(bytevector->uuid): New procedure.
(uuid): Return calls to 'make-uuid'.
(uuid->string): Rewrite using 'match-lambda*' to accept a single 'uuid?'
argument.
* gnu/bootloader/grub.scm (grub-root-search): Check for 'uuid?' instead
of 'bytevector?'.
* gnu/system.scm (bootable-kernel-arguments): Check whether ROOT-DEVICE
is 'uuid?'.
(read-boot-parameters): Use 'bytevector->uuid' when the
store device is a bytevector.
(read-boot-parameters-file): Check for 'uuid?' instead of 'bytevector?'.
(device->sexp): New procedure.
(operating-system-boot-parameters-file): Use it for 'root-device' and
'store'.
(operating-system-bootcfg): Remove conditional in definition of
'root-device'.
* gnu/system/file-systems.scm (file-system->spec): Check for 'uuid?' on
DEVICE and take its bytevector.
* gnu/system/mapped-devices.scm (open-luks-device): Likewise.
* gnu/system/vm.scm (iso9660-image): Call 'uuid-bytevector' for the
#:volume-uuid argument.
* gnu/bootloader.scm (<bootloader-configuration>): Deprecate "device" field in
favor of "target" field. This is mostly a renaming but also a generalization
to support UEFI targets being paths to a mounted partition instead of a device
name.
* gnu/system/examples/bare-bones.tmpl:
* gnu/system/examples/desktop.tmpl:
* gnu/system/examples/lightweight-desktop.tmpl:
* gnu/system/examples/vm-image.tmpl:
* gnu/system/install.scm:
* gnu/tests.scm:
* gnu/tests/install.scm:
* gnu/tests/nfs.scm:
* tests/system.scm: Adapt all invocations of bootloader-configuration.
* guix/scripts/system.scm (perform-action): Rename device argument to
bootloader-target.
(process-action): Adapt caller.
* doc/guix.texi (Proceeding with the Installation):
* doc/guix.texi (Bootloader Configuration): Update documentation.
* gnu/bootloader/grub.scm (install-grub-efi): Fix grub-install invocation for
EFI systems.
* gnu/system/examples/bare-bones.tmpl: Use the newer
"bootloader-configuration" syntax.
* gnu/system/examples/desktop.tmpl: Use bootloader-configuration sytax. Also,
use the same label for the LUKS-mapped device and the root partition. Remove
unneeded "title" field for the file-system based on LUKS; as noted in the
manual, the "title" field is ignored for mapped devices.
* gnu/system/examples/lightweight-desktop.tmpl: Use bootloader-configuration,
and use grub-efi-bootloader.
* gnu/system/vm.scm (system-qemu-image/shared-store-script): Add
#:options parameter and honor it.
(<virtual-machine>): New record type.
(virtual-machine): New macro.
(port-forwardings->qemu-options, virtual-machine-compiler): New
procedures.
* gnu/system/vm.scm (expression->derivation-in-linux-vm): Add
#:single-file-output? and pass it to 'load-in-linux-vm'.
(iso9660-image): Pass #:single-file-output? to
'expression->derivation-in-linux-vm'.
* gnu/build/vm.scm (load-in-linux-vm): Add #:single-file-output? and
honor it.
* gnu/system/locale.scm (single-locale-directory): Use 'computed-file'
instead of 'gexp->derivation'.
(locale-directory): Adjust accordingly and do the same.
* gnu/system.scm (operating-system-directory-base-entries): Adjust
accordingly.
* gnu/build/vm.scm (initialize-hard-disk): Use "GuixSD" as label.
* gnu/system/install.scm (installation-os): Use "GuixSD" as label.
* gnu/system/vm.scm (system-disk-image): Use "GuixSD" or "GUIXSD" as volume
label.
Co-authored-by: Ludovic Courtès <ludo@gnu.org>
* gnu/system/linux-initrd.scm (expression->initrd): Use 'program-file'
for 'init'.
(flat-linux-module-directory): Use 'computed-file' instead of
'gexp->derivation'.
(raw-initrd): Adjust accordingly.
* build-aux/hydra/gnu-system.scm (qemu-jobs): Add 'iso9660-image .
* gnu/build/vm.scm (make-iso9660-image): New variable. Export it.
* gnu/system/vm.scm (iso9660-image): New variable. Use make-iso9660-image.
(system-disk-image): Use iso9660-image.
* gnu/build/vm.scm (estimated-partition-size): New procedure.
* gnu/system/vm.scm (expression->derivation-in-linux-vm):
Change #:disk-image-size default to 'guess.
[builder]: When DISK-IMAGE-SIZE is 'guess, use
'estimated-partition-size' and compute and estimate of the image size.
(qemu-image): Likewise.
* guix/build/store-copy.scm (file-size, closure-size): New procedures.
* guix/scripts/system.scm (%default-options): Change 'image-size' to
'guess.
* doc/guix.texi (Building the Installation Image): Remove '--image-size'
flag from example.
(Invoking guix system): Document the image size estimate.
Fixes <https://bugs.gnu.org/27242>.
* gnu/system/mapped-devices.scm (open-luks-device): If
'find-partition-by-luks-uuid' fails, try again once per second, up to ten
times.
* doc/guix.texi (USB Stick Installation): Mention UEFI.
(Preparing for Installation): Add notes about EFI System Partition, and
mounting partitions before init.
(Proceeding with the Installation): Mention the GRUB-EFI package.
(Using the Configuration System): Lightweight desktop is now a UEFI system.
(GRUB Configuration): Expand on package field. Add indexes.
* gnu/system/examples/lightweight-desktop.tmpl: Adjust to native EFI configuration.
* gnu/system/examples/vm-image.tmpl: New file.
* Makefile.am (GUIXSD_VM_SYSTEMS, GUIXSD_VM_IMAGE_BASE,
GUIXSD_VM_IMAGE_SIZE): New variables.
(release): Add logic to build a VM image.
(EXAMPLES): Add 'gnu/system/examples/vm-image.tmpl'.
* doc/guix.texi (Running GuixSD in a VM, Installing GuixSD in a VM): Mention the
pre-built VM image.
* gnu/bootloader.scm: New file.
* gnu/bootloader/extlinux.scm: New file.
* gnu/bootloader/grub.scm: New file.
* gnu/local.mk: Build new files.
* gnu/system.scm: Adapt to new bootloader api.
* gnu/scripts/system.scm: Adapt to new bootloader api.
* gnu.scm: Remove (gnu system grub) and replace by (gnu bootloader) and (gnu
bootloader grub) modules.
* gnu/system/grub.scm: Moved content to gnu/bootloader/grub.scm.
* gnu/system/vm: Replace (gnu system grub) module by (gnu bootloader).
* gnu/tests.scm: Ditto.
* gnu/tests/nfs.scm: Ditto.
* gnu/system/grub.scm (<grub-configuration>): Add new fields
terminal-outputs, terminal-inputs, serial-unit, and serial-speed.
(grub-setup-io, setup-gfxterm): New procedures.
* doc/guix.texi (GRUB Configuration): Document the new fields.
* gnu/system/pam.scm (unix-pam-service): Add pam-entry for "pam_rootok.so" to
auth field when ALLOW-ROOT? is #T.
(base-pam-services): Allow root to run "su" without authentication.
* gnu/system/grub.scm (boot-parameters->menu-entry): New variable.
(grub-configuration-file): Use boot-parameters
instead of menu-entry where possible.
* guix/scripts/system.scm (profile-boot-parameters): Update docstring.
(reinstall-grub): Use profile-boot-parameters.
(perform-action): Use profile-boot-parameters.
This resulted in a couple of harmless warnings just before the menu is
displayed.
* gnu/system/grub.scm (eye-candy)[setup-gfxterm-body]: Move 'vbe' and
'vga' loading to the non-EFI branch.
Fixes a regression introduced in
7208995426 whereby (gnu system
file-systems) would pull in (gnu packages …) module, which in turn
breaks when importing things like (gnu build shepherd).
* gnu/system/file-systems.scm (file-system-type-predicate): Export.
(file-system-packages): Move to...
* gnu/system/linux-initrd.scm (file-system-packages): ... here. Add
docstring.
* gnu/services/base.scm: Use it.
* tests/file-systems.scm ("does not pull (gnu packages …)"): New test.
* gnu/system/linux-initrd.scm (base-initrd): Move helper-packages body to ...
* gnu/system/file-systems.scm (file-system-packages): ... here. New variable.
Also export it.
* gnu/system/linux-initrd.scm (raw-initrd): New exported variable.
(base-initrd): Use raw-initrd to build the initrd.
* doc/guix.texi (Initial RAM Disk): Document it.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/system/vm.scm (virtualized-operating-system): Add full-boot?
option. Don't add a %store-mapping when full-boot? is passed. This leads
the grub-configuration-file procedure to look for the kernel and initrd in
/ instead of /gnu/store.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
(gnu system file-systems) is used on the "build" side since commit
5970e8e248.
* gnu/system/file-systems.scm: Remove dependency on (guix store).
(%store-prefix): New procedure.
* tests/file-systems.scm ("does not pull (guix config)"): New test.
Fixes <http://bugs.gnu.org/21108>.
Reported by Andy Patterson <ajpatter@uwaterloo.ca>
and Leo Famulari <leo@famulari.name>.
* gnu/build/activation.scm (activate-users+groups)[activate-user]: Pass
#:create-home? #t iff CREATE-HOME? and SYSTEM?.
(activate-user-home): New procedure.
* gnu/system/shadow.scm (account-shepherd-service): New procedure.
(account-service-type)[extensions]: Add SHEPHERD-ROOT-SERVICE-TYPE
extension.
* gnu/tests/base.scm (run-basic-test)["home"]
["skeletons in home directories"]: New tests.
* gnu/tests/install.scm (%separate-home-os, %separate-home-os-source)
(%test-separate-home-os): New variables.
Reported by myglc2 <myglc2@gmail.com>.
* gnu/system/mapped-devices.scm (<mapped-device>)[source]: Update
comment to note that this can be a list of strings.
Suggested by John Darrington <john@darrington.wattle.id.au>.
* gnu/system/file-systems.scm (%not-slash): New variable.
(file-prefix?): New procedure.
(file-system-needed-for-boot?): Use it to check whether FS holds the
store.
* tests/file-systems.scm ("file-system-needed-for-boot?"): New test.
* gnu/tests/install.scm (%separate-store-os)[file-systems]: Remove
'needed-for-boot?' field for "/gnu".
* gnu/system/linux-initrd.scm (base-initrd): When a FAT filesystem is
present: Add fatfsck/static in 'helper-packages'; and add nls_iso8859-1
in 'linux-modules'.
This is a followup to f7f292d359.
* doc/guix.texi (Preparing for Installation): Give commands for
encrypted root installation.
(Proceeding with the Installation): Add item about mapped devices.
(File Systems): Mention that 'dependencies' can list <mapped-device>
objects.
* gnu/system/examples/desktop.tmpl (mapped-devices): New field.
(file-systems): Add 'dependencies' field.
* gnu/build/linux-container.scm (mount-file-systems): 'mounts' is now a
list of <file-system> objects instead of a list of lists ("specs").
Add call to 'file-system->spec' as the argument to 'mount-file-system'.
(run-container, call-with-container): Adjust docstring accordingly.
* gnu/system/file-systems.scm (spec->file-system): New procedure.
* gnu/system/linux-container.scm (container-script)[script]: Call
'spec->file-system' inside gexp.
* guix/scripts/environment.scm (launch-environment/container): Remove
call to 'file-system->spec'.
* tests/containers.scm ("call-with-container, mnt namespace")
("call-with-container, mnt namespace, wrong bind mount"): Pass a list of
<file-system> objects.
* gnu/system.scm (<boot-parameters>)[store-device, store-mount-point]:
New fields.
(read-boot-parameters): Initialize them.
(operating-system-grub.cfg): Likewise. Remove STORE-FS argument from
call to 'grub-configuration-file'.
(operating-system-parameters-file): Add 'store' element in
'boot-parameters'.
* gnu/system/grub.scm (strip-mount-point): Replace 'store-fs' parameter
by 'mount-point'; adjust accordingly. Adjust callers.
(<menu-entry>)[device, device-mount-point]: New fields.
(eye-candy): Replace 'root-fs' parameter by 'store-device'; add
'store-mount-point'. Use keyword arguments for 'system' and 'port'.
(grub-root-search): Remove 'root-fs' by 'device' and adjust
accordingly.
(grub-configuration-file): Remove 'store-fs' parameter. Adjust
accordingly.
* guix/scripts/system.scm (previous-grub-entries): Initialize 'device'
and 'device-mount-point' fields from PARAMS.
* doc/guix.texi (GRUB Configuration): Document 'device' and
'device-mount-point'. Explain that 'linux' can be prefixed by a GRUB
device name.
Co-authored-by: Ludovic Courtès <ludo@gnu.org>
Based on a suggestion by Andy Wingo at
<https://lists.gnu.org/archive/html/guix-devel/2015-08/msg00753.html>.
* gnu/build/svg.scm: New file.
* gnu/local.mk (GNU_SYSTEM_MODULES): Add it.
* gnu/system/grub.scm (svg->png): Add #:width and #:height. Rewrite to
use (gnu build svg).
(resize-image): Remove.
(grub-background-image): Adjust accordingly.
This fixes a type error introduced in
7f8ad82bf2, given that SOURCES is a list.
* gnu/system/mapped-devices.scm (open-raid-device): Add 'apply'
invocation.
Reported by Tomáš Čech <tcech@suse.com>
at <http://debbugs.gnu.org/cgi/bugreport.cgi?bug=20067#26>.
* gnu/system/grub.scm (grub-root-search): Don't emit anything when FILE
is a string that does not denote an absolute file name.
Fixes <http://bugs.gnu.org/24346>.
Reported by csanchezdll@gmail.com (Carlos Sánchez de La Lama).
* guix/scripts/system.scm (previous-grub-entries): Get the initrd file
name from PARAMS.
* gnu/system.scm (operating-system-grub.cfg): Use
'operating-system-initrd-file' to retrieve the initrd file name.
* gnu/system/grub.scm (strip-mount-point): New procedure.
(grub-configuration-file)[entry->gexp]: Call 'strip-mount-point' for
LINUX and INITRD.
Co-authored-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/base.scm (%default-console-font): New variable.
(console-font-shepherd-services): New procedure.
(console-font-service-type): Change to use 'service-type'.
(console-font-service): Rewrite using 'simple-service'.
(%base-services): Use a single CONSOLE-FONT-SERVICE-TYPE instance.
* gnu/system/install.scm (installation-services): Likewise.
Fixes <http://bugs.gnu.org/20067>.
Reported by Tomáš Čech <sleep_walker@suse.cz>.
* gnu/system.scm (system-linux-image-file-name)
(operating-system-kernel-file): New procedures.
(operating-system-grub.cfg): Use 'operating-system-kernel-file' for the
'kernel' field of 'menu-entry'.
(operating-system-parameters-file): Likewise for the 'kernel' entry.
(read-boot-parameters): Adjust 'kernel' field so that it contains the
absolute file name of the image.
* gnu/system/grub.scm (grub-configuration-file)[linux-image-name]:
Remove.
[entry->gexp]: Assume LINUX is the absolute file name of the kernel
image.
* doc/guix.texi (GRUB Configuration): Add an example, and adjust
'kernel' field documentation accordingly.
* gnu/system/examples/lightweight-desktop.tmpl: While it is currently
unknown if Bob has a brother, it is sufficiently documented that Alice
is, in fact, Bob's sister.
Fixes <http://bugs.gnu.org/24275>.
Reported by John Darrington <john@darrington.wattle.id.au>.
* gnu/system/shadow.scm (%base-user-accounts):
Add (create-home-directory? #f) for "nobody".
* gnu/system/mapped-devices.scm (open-raid-device): Rename 'source' to
'sources'. Make 'waiting' message more informative.
(close-raid-device): Rename 'source' to 'sources'.
* gnu/system/pam.scm (<pam-limits-entry>): New record type.
(pam-limits-entry, pam-limits-entry->string): New procedures.
* gnu/services/base.scm (pam-limits-service-type): New variable.
(pam-limits-service): New procedure.
* doc/guix.texi (Base Services): Document it.
Fixes <http://bugs.gnu.org/23971>.
Reported by Vincent Legoll <vincent.legoll@gmail.com>.
* gnu/system/shadow.scm (%base-user-accounts): Add 'shell' field. Set
'home-directory' to "/nonexistent".
* gnu/services/shepherd.scm (<shepherd-service>)[imported-modules]:
Remove.
(%default-imported-modules): Make private.
(shepherd-service-file): Use 'with-imported-modules'.
(shepherd-configuration-file): Remove 'modules' and the calls to
'imported-modules' and 'compiled-modules'. Use
'with-imported-modules' instead.
* doc/guix.texi (Shepherd Services): Adjust accordingly.
* gnu/services/base.scm (file-system-shepherd-service): Use
'with-imported-modules'. Remove 'imported-modules' field.
* gnu/system/mapped-devices.scm (device-mapping-service-type): Remove
'imported-modules'.
(open-luks-device): Use 'with-imported-modules'.
* gnu/tests.scm (marionette-shepherd-service): Remove 'imported-modules'
field and use 'with-imported-modules'.
* gnu/services.scm (activation-script): Remove code to set '%load-path'
and use 'with-imported-modules' instead.
(cleanup-gexp): Likewise.
* gnu/system/vm.scm (%vm-module-closure): New variable.
(expression->derivation-in-linux-vm): Remove #:modules.
[loader]: Remove code to set '%load-path'.
[builder]: Use %VM-MODULE-CLOSURE.
(qemu-image): Use 'with-imported-modules'.
This fixes a regression introduced in
958dd3ce68.
* gnu/system/linux-container.scm (container-script)[script]: Add (guix
combinators) to the list of imported modules.
This reduces the size of the image produced by 'guix system vm' from
26 MiB to 9 MiB.
* gnu/system/vm.scm (system-qemu-image/shared-store):
(system-qemu-image/shared-store-script): Change the default
value of #:disk-image-size to 30 MiB when not FULL-BOOT?.
* guix/scripts/system.scm (system-derivation-for-action): Likewise for
the 'vm' action.
* gnu/system/mapped-devices.scm (device-mapping-service-type): Add
'modules' and 'imported-modules' fields to 'shepherd-service'.
(open-luks-device): Use 'find-partition-by-luks-uuid' to lookup the
partition when SOURCE is a bytevector.
* gnu/system/linux-initrd.scm (base-initrd): Augment 'use-modules'
form.
* doc/guix.texi (Mapped Devices): Give example with a UUID.
Suggested by Jelle Licht <jlicht@fsfe.org>.
* gnu/system/install.scm (installation-services): Say 'beta' instead of
'alpha' and make the warning less scary.
Fixes <http://bugs.gnu.org/22927>.
Reported by myglc2 <myglc2@gmail.com>.
This also reverts commit e71ef7adae.
* gnu/packages/fontutils.scm (fontconfig)[arguments]: Add
/run/current-system/profile/share/fonts to --with-add-fonts configure flag.
* gnu/system/shadow.scm (default-skeletons): Do not create "fonts.conf" file.
* gnu/system/install.scm (installation-os)[packages]: Remove TEXINFO-4
since %BASE-PACKAGES already provides the Info reader.
(log-to-info): Use INFO-READER instead of TEXINFO-4.
Fixes <http://bugs.gnu.org/23056>.
Reported by Michael Downey <shaggy814@yandex.com>
and Kei <kei@openmailbox.org>.
* gnu/system/install.scm (installation-os)[file-systems]: Add "/tmp".
This fixes a bug whereby fonts in /run/current-system/profile would be
invisible to Fontconfig.
* gnu/packages/fontutils.scm (fontconfig): Add comment about system
profile not being searched.
* gnu/system/shadow.scm (default-skeletons)[fonts.conf-content,
fonts.conf]: New variable.
Add FONTS.CONF to the skeletons.
Fixes <http://bugs.gnu.org/22633>.
* gnu/build/vm.scm (load-in-linux-vm): Only pass "-enable-kvm" flag to qemu
if "/dev/kvm" is present.
* gnu/system/vm.scm (common-kvm-options): Same as above.
Fixes <http://bugs.gnu.org/22572>.
Reported by Mark H Weaver <mhw@netris.org>.
* gnu/system/locale.scm (%not-dot): New variable.
(denormalize-codeset, locale-name->definition): New procedures.
* gnu/system.scm (locale-name->definition*): New procedure.
(operating-system-locale-directory): Instead of raising an error, add
the missing locale.
* doc/guix.texi (Locales): Adjust accordingly.
* gnu/system/linux-container.scm (containerized-operating-system)[user-file-systems]:
Check whether SOURCE is a string before calling 'string-prefix?'.
* guix/build/bournish.scm: New file.
* Makefile.am (MODULES): Add it.
* gnu/system/linux-initrd.scm (base-initrd): Add (guix build bournish)
and use it.
* gnu/system/pam.scm (<pam-configuration>): New record type.
(/etc-entry): Change 'services' parameter' to 'config'. Honor the
'transform' field of CONFIG.
(extend-configuration): New procedure.
(pam-root-service-type): Use EXTEND-CONFIGURATION as the 'extend'
field.
(pam-root-service): Add #:transform parameter. Service value is a
<pam-configuration>.
Adds modules needed for encrypted root partitions using the Serpent cipher or
Whirlpool digest algorithms.
* gnu/system/linux-initrd.scm (base-initrd)[linux-modules]: Add
"serpent_generic" and "wp512".
Fixes keyboard of MacBook2,1 during early boot, e.g. for typing a password to
mount an encrypted root partition.
* gnu/system/linux-initrd.scm (base-initrd)[linux-modules]: Add "hid-generic"
and "hid-apple".
Fixes <http://bugs.gnu.org/22281>.
Reported by Christopher Allan Webber <cwebber@dustycloud.org>.
* gnu/system/grub.scm (eye-candy): Add 'root-fs' parameter. Replace
'search --file' command in the output with whatever 'grub-root-search'
returns.
(grub-root-search): New procedure.
(grub-configuration-file): Add 'store-fs' parameter. Use
'grub-root-search' instead of hard-coded 'search --file' commands.
* gnu/system.scm (store-file-system,
operating-system-store-file-system): New procedures.
(operating-system-grub.cfg): Use it, and adjust call to
'grub-configuration-file'.
* tests/system.scm: New file.
* Makefile.am (SCM_TESTS): Add it.
This is a followup to ab64483.
* gnu/system.scm (mapped-device-user): Check whether the title of FS is
'device before calling 'string=?'.
* gnu/system/vm.scm (virtualized-operating-system)[user-file-systems]:
Likewise.
Fixes <http://bugs.gnu.org/22176>.
Reported by Florian Paul Schmidt <mista.tapas@gmx.net>.
* gnu/system/file-systems.scm (<file-system>)[mount?]: New field.
(file-system->spec): Adjust accordingly.
* gnu/services/base.scm (file-system-dmd-service): Return the empty list
when FILE-SYSTEM has 'mount?' set to false.
(user-processes-service): Select the subset of FILE-SYSTEMS that matches
'file-system-mount?'.
* doc/guix.texi (File Systems): Document it.
Reported by 宋文武 <iyzsong@openmailbox.org>
at <https://lists.gnu.org/archive/html/guix-devel/2015-11/msg00096.html>.
* doc/guix.texi (System Installation): Comment out encrypted root
partition commands.
* gnu/system/examples/desktop.tmpl (mapped-devices): Remove.
(file-systems): Refer to the root by label.
* NEWS: Adjust.
* gnu/services.scm (system-derivation): New procedure.
(system-service-type): New variable.
(boot-script-entry): New procedure.
(boot-service-type): Extend SYSTEM-SERVICE-TYPE.
(etc-entry): New procedure.
(etc-service-type): Extend SYSTEM-SERVICE-TYPE.
(fold-services): Change default #:target-type to SYSTEM-SERVICE-TYPE.
* gnu/system.scm (operating-system-directory-base-entries): New procedure.
(essential-services): Use it. Add an instance of
SYSTEM-SERVICE-TYPE.
(operating-system-boot-script): Pass #:target-type to 'fold-services'.
(operating-system-derivation): Rewrite in terms of 'fold-services'.
* gnu/system/linux-container.scm (system-container): Remove.
(container-script): Use 'operating-system-derivation'.
* guix/scripts/system.scm (export-extension-graph): Replace
BOOT-SERVICE-TYPE by SYSTEM-SERVICE-TYPE.
* doc/images/service-graph.dot: Add 'system' node and edges.
* doc/guix.texi (Service Composition): Mention SYSTEM-SERVICE-TYPE.
(Service Reference): Document it. Update 'fold-services'
documentation.
* gnu/system/examples/desktop.tmpl: Add 'mapped-devices' field.
Use it in 'file-systems'.
* doc/guix.texi (System Installation): Suggest encrypted partitions.
Give an example of a command sequence.
* gnu/system/locale.scm (localedef-command)[maybe-version-directory]:
New procedure.
Use it.
(locale-directory): Rename to...
(single-locale-directory): ... this. Check the version of LIBC to
determine whether to create a "X.Y" sub-directory or to make it a
symlink to ".". Add the version number in the derivation name.
(locale-directory): New procedure.
(%default-locale-libcs): New variable.
* gnu/system.scm (<operating-system>)[locale-libcs]: New field.
(operating-system-locale-directory): Pass it to 'locale-directory'.
* doc/guix.texi (operating-system Reference): Document 'locale-libcs'.
(Locales)[Locale Data Compatibility Considerations]: New section.
Fixes a regression introduced in commit 0adfe95.
* gnu/system.scm (other-file-system-services)[requirements]: Remove.
[add-dependencies]: New procedure.
Use it.
* gnu/system/file-systems.scm (<file-system>)[dependencies]: Update
comment.
* gnu/services/base.scm (mapped-device->dmd-service-name,
dependency->dmd-service-name): New procedures.
(file-system-service-type): Use it.
On PCs, it means that it will typically choose resolutions higher
than 640x480, which is nicer.
* gnu/system/grub.scm (eye-candy)[setup-gfxterm-body]: Leave 'gfxmode'
unset.
* gnu/system/grub.scm (eye-candy): Accept additional 'system' argument. Add
local 'setup-gfxterm-body' variable. Replace the 'load_video' grub function
with 'setup_gfxterm', which includes everything in the 'if loadfont' form on
Intel systems, but is empty on non-Intel.
(grub-configuration-file): Pass 'system' to 'eye-candy.
This patch rewrites GuixSD services to make them extensible.
* gnu-system.am (GNU_SYSTEM_MODULES): Add gnu/services/dbus.scm.
* gnu/services.scm (<service>): Replace with new record type.
(<service-extension>, <service-type>): New record types.
(write-service-type, compute-boot-script, second-argument): New
procedures.
(%boot-service, boot-service-type): New variables.
(file-union, directory-union, modprobe-wrapper,
activation-service->script, activation-script,
gexps->activation-gexp): New procedures.
(activation-service-type, %activation-service): New variables.
(etc-directory, files->etc-directory, etc-service): New procedures.
(etc-service-type, setuid-program-service, firmware-service-type): New
variables.
(firmware->activation-gexp): New procedure.
(&service-error, &missing-target-service-error,
&ambiguous-target-service-error): New condition types.
(service-back-edges, fold-services): New procedures.
* gnu/services/avahi.scm (<avahi-configuration>): New record type.
(configuration-file): Replace keyword parameters with a single
'config' parameter.
(%avahi-accounts, %avahi-activation, avahi-service-type): New
variables.
(avahi-dmd-service): New procedure.
(avahi-service): Rewrite using 'service' and 'avahi-configuration'.
* gnu/services/base.scm (%root-file-system-dmd-service,
root-file-system-service-type): New variables.
(root-file-system-service): Use them.
(file-system->dmd-service-name): New procedure.
(file-system-service-type): New variable.
(file-system-service): Use it. Replace keyword parameters with a
single 'file-system' object.
(user-unmount-service-type): New variable.
(user-unmount-service): Use it.
(user-processes-service-type): New variable.
(user-processes-service): Use it.
(host-name-service-type): New variable.
(host-name-service): Use it.
(console-keymap-service-type): New variable.
(console-keymap-service): Use it.
(console-font-service-type): New variable.
(console-font-service): Use it.
(mingetty-pam-service, mingetty-dmd-service): New procedures.
(mingetty-service-type): New variable.
(mingetty-service): Use it.
(nscd-dmd-service): New procedure.
(nscd-activation, nscd-service-type): New variables.
(nscd-service): Use the latter.
(syslog-service-type): New variable.
(syslog-service): Use it.
(<guix-configuration>): New record type.
(%default-guix-configuration): New variable.
(guix-dmd-service, guix-accounts, guix-activation): New procedures.
(guix-service-type): New variable.
(guix-service): Replace list of keyword parameters with a single
'config' parameter. Rewrite using 'service'.
(<udev-configuration>): New record type.
(udev-dmd-service): New procedure.
(udev-service-type): New variable.
(udev-service): Use it.
(device-mapping-service-type): New variable.
(device-mapping-service): Use it.
(swap-service-type): New variable.
(swap-service): Use it.
* gnu/services/databases.scm (<postgresql-configuration>): New record
type.
(%postgresql-accounts, postgresql-activation): New variables.
(postgresql-dmd-service): New procedure.
(postgresql-service): Rewrite using 'service' and
'postgresql-configuration'.
* gnu/services/dbus.scm: New file.
* gnu/services/desktop.scm (dbus-configuration-directory, dbus-service):
Remove.
(wrapped-dbus-service): New procedure.
(<upower-configuration>): New record type.
(upower-configuration-file): Replace keyword parameters with single
<upower-configuration> parameter.
(%upower-accounts, %upower-activation): New variables.
(upower-dbus-service, upower-dmd-service): New procedures.
(upower-service-type): New variable.
(upower-service): Rewrite using 'service' and 'upower-configuration'.
(%colord-activation, %colord-accounts): New variables.
(colord-dmd-service): New procedure.
(colord-service-type): New variable.
(colord-service): Rewrite using 'service'.
(<geoclue-configuration>): New record type.
(geoclue-configuration-file): Replace keyword parameters with a single
'config' parameter.
(geoclue-dbus-service, geoclue-dmd-service): New procedures.
(%geoclue-accounts, geoclue-service-type): New variables.
(geoclue-service): Rewrite using 'service' and
'geoclue-configuration'.
(%polkit-accounts, %polkit-pam-services, polkit-service-type): New
variables.
(polkit-dmd-service): New procedure.
(polkit-service): Rewrite using 'service'.
(<elogind-configuration>)[elogind]: New field.
(elogind-dmd-service): New procedure.
(elogind-service-type): New variable.
(elogind-service): Rewrite using 'service'.
(%desktop-services): Remove argument to 'dbus-service'. Remove 'map'
over %BASE-SERVICES.
* gnu/services/dmd.scm (dmd-boot-gexp): New procedure.
(dmd-root-service-type, %dmd-root-service): New variables.
(dmd-service-type): New macro.
(<dmd-service>): New record type.
* gnu/services/lirc.scm (<lirc-configuration>): New record type.
(%lirc-activation): New variable.
(lirc-dmd-service): New procedure.
(lirc-service-type): New variable.
(lirc-service): Rewrite using 'service' and 'lirc-configuration'.
* gnu/services/networking.scm (<static-networking>): New record type.
(static-networking-service-type): New variable.
(static-networking-service): Rewrite using 'service' and
'static-networking'.
(dhcp-client-service-type): New variable.
(dhcp-client-service): Rewrite using 'service'.
(<ntp-configuration>): New record type.
(ntp-dmd-service): New procedure.
(ntp-service-type): New variable.
(ntp-service): New procedure.
(%tor-accounts, tor-service-type): New variable.
(tor-dmd-service): New procedure.
(tor-service): Rewrite using 'service'.
(<bitlbee-configuration>): New record type.
(bitlbee-dmd-service): New procedure.
(%bitlbee-accounts, %bitlbee-activation, bitlbee-service-type): New
variables.
(bitlbee-service): Rewrite using 'service'.
(%wicd-activation): New variable.
(wicd-dmd-service): New procedure.
(wicd-service-type): New variable.
(wicd-service): Rewrite using 'service'.
* gnu/services/ssh.scm (<lsh-configuration>): New record type.
(activation): Rename to...
(lsh-initialization): ... this.
(lsh-activation, lsh-dmd-service, lsh-pam-services): New procedures.
(lsh-service-type): New variable.
(lsh-service): Rewrite using 'service' and 'lsh-configuration'.
* gnu/services/web.scm (<nginx-configuration>): New record type.
(%nginx-accounts): New variable.
(nginx-activation, nginx-dmd-service): New procedures.
(nginx-service-type): New variable.
(nginx-service): Rewrite using 'service' and 'nginx-configuration'.
* gnu/services/xorg.scm (<slim-configuration>): New record type.
(slim-pam-service, slim-dmd-service): New procedures.
(slim-service-type): New variable.
(slim-service): Rewrite using 'service' and 'slim-configuration'.
* gnu/system.scm (file-union): Remove.
(other-file-system-services): Adjust to new 'file-system-service'
signature.
(essential-services): Add #:container? parameter. Add
%DMD-ROOT-SERVICE, %ACTIVATION-SERVICE, and calls to
'pam-root-service', 'account-service', 'operating-system-etc-service',
and a SETUID-PROGRAM-SERVICE instance.
(operating-system-services): Pass #:container? to 'essential-services.
(etc-directory): Remove.
(operating-system-etc-service): New procedure. Rewrite as a call to
'etc-service'.
(operating-system-accounts): Change to not return accounts required by
services.
(operating-system-etc-directory): Rewrite as a call to 'fold-services'
and 'etc-directory'.
(user-group->gexp, user-account->gexp, modprobe-wrapper): Remove.
(operating-system-activation-script): Rewrite as a call to
'fold-services' and 'activation-service->script'.
(operating-system-boot-script): Likewise.
(operating-system-derivation): Add call to 'lower-object'.
(emacs-site-file, emacs-site-directory, shells-file): Change to use
'computed-file' and 'scheme-file' instead of the monadic procedures.
* gnu/system/install.scm (cow-store-service-type): New variable.
(cow-store-service): Rewrite using 'service'.
(/etc/configuration-files): New procedure.
(configuration-template-service-type,
%configuration-template-service): New variables.
(configuration-template-service): Remove.
(installation-services): Adjust accordingly. Adjust argument to
'guix-service'.
* gnu/system/linux.scm (/etc-entry, pam-root-service): New procedures.
(pam-root-service-type): New variable.
* gnu/system/shadow.scm (user-group->gexp, user-account->gexp,
account-activation, etc-skel, account-service): New procedures.
(account-service-type): New variable.
* tests/services.scm: New file.
* doc/guix.texi (Base Services, Desktop Services): Adjust accordingly.
(Defining Services): Rewrite.
* doc/images/service-graph.dot: New file.
* doc.am (DOT_FILES): Add it.
* po/guix/POTFILES.in: Add gnu/services.scm.
* gnu/system/shadow.scm (default-skeletons): Use the non-monadic
procedures and turn into a regular procedure.
(skeleton-directory): Likewise.
* gnu/system.scm (etc-directory): Adjust accordingly.
* gnu/services/avahi.scm (configuration-file): Use 'plain-file' instead
of 'text-file'.
(avahi-service): Turn into a regular procedure that returns a <service>.
* gnu/services/base.scm (root-file-system-service, file-system-service,
user-unmount-service, user-processes-service, host-name-service,
console-keymap-service, console-font-service, mingetty-service,
nscd.conf-file, nscd-service): Likewise.
(%default-syslog.conf): New variable.
(syslog-service): Use it. Turn into a regular procedure.
(guix-service, udev-rules-union, kvm-udev-rule, udev-service,
device-mapping-service, swap-service): Likewise.
* gnu/services/databases.scm (%default-postgres-hba,
%default-postgres-ident): Use 'plain-file' instead of 'text-file'.
(%default-postgres-config): Use 'mixed-text-file' instead of
'text-file*'.
(postgresql-service): Use 'program-file' instead of 'gexp->script'.
Turn into a regular procedure.
* gnu/services/desktop.scm (dbus-configuration-directory): Use
'computed-file' instead of 'gexp->derivation'.
(upower-configuration-file, geoclue-configuration-file,
elogind-configuration-file): Use 'plain-file' instead of 'text-file'.
(dbus-service, upower-service, colord-service, geoclue-service,
polkit-service, elogind-service): Turn into regular procedures.
(%desktop-services): Remove use of 'mlet' when iterating on
%BASE-SERVICES.
* gnu/services/lirc.scm (lirc-service): Turn into a regular procedure.
* gnu/services/networking.scm (static-networking-service,
dhcp-client-service, ntp-service, tor-service, bitlbee-service,
wicd-service): Likewise.
* gnu/services/ssh.scm (lsh-service): Likewise.
* gnu/services/web.scm (nginx-service): Likewise.
* gnu/services/xorg.scm (xorg-configuration-file): Use 'mixed-text-file'
instead of 'text-file*'.
(xorg-start-command, slim-service): Turn into regular procedures.
(xinitrc): Use 'program-file' instead of 'gexp->script'.
* gnu/system/install.scm (cow-store-service,
configuration-template-service): Turn into regular procedures.
* gnu/system.scm (other-file-system-services, device-mapping-services,
swap-services, essential-services, operating-system-services,
user-shells, operating-system-accounts): Remove now unnecessary
'mlet' and turn into regular procedures.
(operating-system-etc-directory, operating-system-activation-script,
operating-system-boot-script): Adjust accordingly.
* doc/guix.texi (Base Services, Networking Services, X Window, Desktop
Services, Database Services, Web Services, Various Services, Name
Service Switch): Adjust accordingly.
* gnu/services/base.scm (mingetty-service): Change default value of
#:motd from a monadic value to a <plain-file>. Assume MOTD to be a
file-like object. Assume LOGIN-PROGRAM is a gexp or #f.
(%base-services): Use 'plain-file' instead of 'text-file' for motd.
* gnu/system/linux.scm (unix-pam-service): Update docstring to mention
that MOTD is a file-like object.
* doc/guix.texi (Base Services): Adjust 'mingetty-service' documentation
accordingly.
* gnu/system/install.scm (installation-services): Adjust accordingly.
(log-to-info): Use 'program-file' instead of 'gexp->script'.
* gnu/packages/base.scm (glibc)[arguments]: Append VERSION to
'libc_cv_localedir'.
* gnu/system/locale.scm (localedef-command): Write to the sub-directory
called (package-version libc) in #$output.
(locale-directory): Create said directory.
* doc/guix.texi (Locales): Mention the per-version sub-directory.
Suggested by Petter <petter@mykolab.ch>
and Mark H Weaver <mhw@netris.org>.
Partly fixes <http://bugs.gnu.org/19190>.
* gnu/system/linux-initrd.scm (base-initrd)[linux-modules]: Add dm-crypt
and xts.
Suggested by Petter <petter@mykolab.ch>
and Mark H Weaver <mhw@netris.org>.
Reported by Duncan Keall <duncan@duncankeall.com>.
Partly fixes <http://bugs.gnu.org/19190> by populating /dev/mapper
early enough.
* gnu/build/linux-boot.scm (mount-essential-file-systems): Mount /dev as
a devtmpfs.
(move-essential-file-systems): Add /dev.
(mount-root-file-system): Mount /rw-root/dev as a devtmpfs instead of
calling 'make-essential-device-nodes'.
(boot-system): Remove call to 'make-essential-device-nodes'.
* gnu/system/file-systems.scm (%devtmpfs-file-system): Remove.
* doc/guix.texi (File Systems): Adjust accordingly.
* gnu/services/base.scm (mingetty-service): Change default value of
#:motd from a monadic value to a <plain-file>. Assume MOTD to be a
file-like object. Assume LOGIN-PROGRAM is a gexp or #f.
(%base-services): Use 'plain-file' instead of 'text-file' for motd.
* gnu/system/linux.scm (unix-pam-service): Update docstring to mention
that MOTD is a file-like object.
* doc/guix.texi (Base Services): Adjust 'mingetty-service' documentation
accordingly.
* gnu/packages/admin.scm (wpa-supplicant-light): Rename to ...
(wpa-supplicant-minimal): ...this.
(wpa-supplicant): Use it.
* gnu/system/install.scm (installation-os): Use it.
* doc/guix.texi (Locales): Introduce "codeset".
<%default-locale-definitions>: Mention the "normalized codeset", with
an xref to libc's manual.
* gnu/system/locale.scm (%default-locale-definitions)[utf8-locale]:
Mention the "normalized codeset" in a comment.
* gnu/build/vm.scm (<partition>): New record type.
(fold2): New procedure.
(initialize-partition-table): Remove #:bootable? and
'partition-size' parameters. Add 'partitions' parameter. Invoke 'parted'
with '--script'.
(initialize-root-partition): Remove.
(initialize-partition, root-partition-initializer): New procedures.
(initialize-hard-disk): Remove #:system-directory, #:disk-image-size,
#:file-system-type, #:file-system-label, #:closures, #:copy-closures?,
#:bootable?, and #:register-closures? parameters. Add #:partitions.
Rewrite to use 'initialize-partition' for each item of PARTITIONS.
* gnu/system/vm.scm (expression->derivation-in-linux-vm): Add (guix records)
to #:modules default value.
(qemu-image): Adjust accordingly.
* gnu/build/vm.scm (initialize-root-partition, initialize-hard-disk): Use the
'umount' procedure instead of invoking the 'umount' command.
* gnu/system/vm.scm (qemu-image): Remove UTIL-LINUX from INPUTS.
* gnu/system.scm (<operating-system>)[kernel-arguments]: New field.
(operating-system-grub.cfg): Honor it.
(operating-system-parameters-file): Add 'kernel-arguments' to the parameters
file.
* guix/scripts/system.scm (previous-grub-entries)[system->grub-entry]: Read
the 'kernel-arguments' field of the parameters file, when available.
* gnu/system/vm.scm (system-qemu-image/shared-store-script):
Use (operating-system-kernel-arguments os) in '-append'.
* doc/guix.texi (operating-system Reference): Document it.
* gnu/system/install.scm (self-contained-tarball): Pass "--mtime=@0". The
only files whose mtime was not already were those in /var/guix and
/gnu/store/.links.
Fixes <http://bugs.gnu.org/19778>.
Reported by Mark H Weaver <mhw@netris.org>.
* gnu/system/file-systems.scm (%uuid-rx): New variable.
(string->uuid): New procedure.
(uuid): New macro.
* tests/file-systems.scm: New file.
* Makefile.am (SCM_TESTS): Add it.
* doc/guix.texi (File Systems): Give an example of UUID.
Hartmut Goebel