* doc/guix.texi (Preparing for Installation): /boot/efi is arbitrary.
Mention /boot/efi consistently.
(Proceeding with the Installation): Make it explicit that the EFI mount point
must both be mounted and be specified in the system configuration.
* doc/guix.texi (Introduction): Add note about Guix System.
[Managing Software the Guix Way]: New section heading.
[GNU Distribution]: New subsection of "Introduction". Mention "Guix
System" rather than "GuixSD" and update the list of supported systems.
(GNU Distribution): Remove as a chapter.
(System Installation, System Configuration, Documentation)
(Installing Debugging Files, Security Updates, Package Modules)
(Packaging Guidelines, Bootstrapping, Porting): Turn these sections
into chapters.
* doc/guix.texi (Proceeding with the Installation): Mention that
/etc/config.scm must be passed as parameter and that root is needed.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
The previous '--verbosity' option was misleading and rarely what users
were looking for. The new option provides a consistent way to choose
whether or not to display the build log.
* guix/scripts/build.scm (show-build-options-help): Remove "--verbosity"
and add "--debug".
(set-build-options-from-command-line): Use the 'debug key of OPTS for
#:verbosity.
(%standard-build-options): Change "verbosity" to "debug". Use
'string->number*' instead of 'string->number'.
(%default-options): Change 'verbosity to 'debug and add a 'verbosity
key.
(show-help): Add '--verbosity'.
(%options): Likewise, and change '--quiet' to set the 'verbosity key of
RESULT.
(guix-build): Use 'with-status-verbosity' instead of parameterizing
CURRENT-BUILD-OUTPUT-PORT, honor the 'verbosity key of OPTS, and remove
'quiet?'.
* guix/scripts/environment.scm (show-help, %options): Add '--verbosity'.
(%default-options): Add 'debug'.
(guix-environment): Honor the 'verbosity key of OPTS.
* guix/scripts/pack.scm (%default-options): Add 'debug.
(%options, show-help): Add '--verbosity'.
(guix-pack): Honor the 'verbosity key of OPTS.
* guix/scripts/package.scm (%default-options): Add 'debug.
(show-help, %options): Add '--verbosity'. Mark '--verbose' as
deprecated and change it to set 'verbosity.
(guix-package): Honor the 'verbosity key of OPTS and remove 'verbose?'.
* guix/scripts/pull.scm (%default-options): Add 'debug.
(show-help, %options): Add '--verbosity'.
(guix-pull): Honor the 'verbosity key of OPTS.
* guix/scripts/system.scm (show-help, %options): Add '--verbosity'.
(%default-options): Add 'debug.
(guix-system): Honor the 'verbosity key of OPTS.
* guix/scripts/archive.scm (%default-options): Add 'debug,
'print-build-trace?, 'print-extended-build-trace?, and
'multiplexed-build-output?.
(show-help, %options): Add '--verbosity'.
(export-from-store): Remove call to 'set-build-options-from-command-line'.
(guix-archive): Wrap body in 'with-status-verbosity'. Add call to
'set-build-options-from-command-line.
* doc/guix.texi (Common Build Options): Document '--verbosity' and
'--debug'.
(Additional Build Options): Adjust description of '--quiet'.
These procedures were already either undocumented (and de facto
deprecated) or documented as deprecated or redundant.
* gnu/services/base.scm (guix-service, guix-publish-service): Mark as
deprecated.
* gnu/services/mcron.scm (mcron-service): Likewise.
* gnu/services/networking.scm (tor-service): Likewise.
* doc/guix.texi (Scheduled Job Execution): Remove 'mcron-service' and
adjust example.
(Networking Services): Remove 'tor-service'.
* gnu/tests/base.scm (%mcron-os): Use 'mcron-service-type' instead of
'mcron-service'.
* gnu/tests/networking.scm (%tor-os): Use 'tor-service-type' instead of
'tor-service'.
* tests/guix-system.sh: Likewise.
Using inferiors and thus 'guix repl' simplifies setup on build
machines (no need to worry about GUILE_LOAD_PATH etc.)
Furthermore, the 'guix repl -t machine' protocol running in a remote
pipe addresses several issues with the current implementation of nodes
and RREPLs in Guile-SSH: fewer round trips, doesn't leave a 'guile
--listen' process behind it, stateless (since a new process is started
each time), more efficient (the SSH channel can be reused), more
reliable (no 'pgrep', 'pkill', and shellology; see
<https://github.com/artyom-poptsov/guile-ssh/issues/11> as an example.)
* guix/ssh.scm (inferior-remote-eval): New procedure.
(send-files): Use it instead of 'make-node' and 'node-eval'.
* guix/scripts/offload.scm (node-guile-version): New procedure.
(node-free-disk-space, transfer-and-offload, node-load)
(choose-build-machine, assert-node-has-guix): Use 'remote-inferior'
instead of 'make-node' and 'inferior-eval' instead of 'node-eval'.
(assert-node-can-import, assert-node-can-export): Likewise, and add
'session' parameter.
(check-machine-availability): Likewise, and add calls to
'close-inferior' and 'disconnect!'.
(check-machine-status): Likewise.
* doc/guix.texi (Daemon Offload Setup): Remove bit related to 'guile' in
$PATH and $GUILE_LOAD_PATH; mention 'guix' alone.
* guix/scripts/refresh.scm (refresh-recursive, list-transitive): New
procedures.
(show-help): Document it.
(guix-refresh): Add flags and checks for new options.
* doc/guix.texi (Invoking guix refresh): Document new options.
* gnu/services/messaging.scm (<quassel-configuration>): New record type.
(%quassel-account, %quassel-activation): New procedures.
(quassel-service-type): New variable.
* gnu/tests/messaging.scm (%test-quassel): New variable.
(run-quassel-test): New procedure.
* doc/guix.texi (Messaging): Document quassel service.
* guix/scripts/lint.scm (check-github-uri): New procedure.
(%checkers): Add it.
* doc/guix.texi (Invoking guix lint): Document it.
* tests/lint.scm ("github-url", "github-url: one suggestion"): New tests.
* guix/scripts/system.scm (show-help): Clarify the three choices.
* doc/guix.texi (Invoking guix system): Add 3 @cindex to make on-error=strategy
easier to find.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* guix/channels.scm (<channel-metadata>): New record.
(read-channel-metadata, channel-instance-dependencies): New procedures.
(latest-channel-instances): Include channel dependencies; add optional
argument PREVIOUS-CHANNELS.
(channel-instance-derivations): Build derivation for additional channels and
add it as dependency to the channel instance derivation.
* doc/guix.texi (Channels): Add subsection "Declaring Channel Dependencies".
* tests/channels.scm: New file.
* Makefile.am (SCM_TESTS): Add it.
* doc/guix.texi (USB Stick and DVD Installation): use @var{system}
consistently.
(Proceeding with the Installation): use @email markup instead of @file.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
This ensures one can scp to or from the GuixSD machine that uses the
service.
* gnu/services/ssh.scm (openssh-service-type)[extensions]: Add
PROFILE-SERVICE-TYPE extension.
* gnu/system/examples/bare-bones.tmpl <packages>: Remove OPENSSH.
* doc/guix.texi (Using the Configuration System): Adjust accordingly.
* nix/nix-daemon/nix-daemon.cc (performOp) <wopSetOptions>: When
'isRemoteConnection' is true, set 'settings.keepFailed' to zero.
* doc/guix.texi (Common Build Options): Document this behavior.
This is an incompatible change visible to users via the 'initrd' field
of 'operating-system'. However, assuming the user's 'initrd' value
tail-calls to 'raw-initrd' or 'base-initrd', the switch to non-monadic
style is invisible.
* gnu/system/linux-initrd.scm (expression->initrd): Use 'computed-file'
instead of 'gexp->derivation'.
(raw-initrd, base-initrd): Adjust docstring to mention non-monadic
return.
* gnu/system/vm.scm (expression->derivation-in-linux-vm): Adjust
accordingly.
* gnu/system.scm (operating-system-directory-base-entries)
(operating-system-initrd-file)
(operating-system-boot-parameters): Adjust accordingly.
* doc/guix.texi (operating-system Reference)
(Initial RAM Disk): Update.
Suggested by swedebugia <swedebugia@riseup.net>.
* doc/contributing.texi (Running Guix Before It Is Installed): Mention
that ./pre-inst-env is generated.
pgp.mit.edu appears to be unreliable these days.
* doc/guix.texi (KEY-SERVER): New variable.
(Binary Installation, USB Stick and DVD Installation): Use it in 'gpg
--recv-keys' example.
* doc/guix.texi (Mail Services): Update accordingly.
* gnu/services/mail.scm (service-configuration)[process-limit]: New field.
(dovecot-configuration)[services]: Set 'process-limit' to its correct default
value.
* doc/guix.texi (Mail Services): Update accordingly.
* gnu/services/mail.scm (service-configuration)[client-limit]: New field.
(dovecot-configuration)[services]: Set 'client-limit' to its correct default
value.
Add an auto-login option that behaves as the one of mingetty-service.
* gnu/services/base.scm (kmscon-configuration)[auto-login]: New field.
(kmscon-service-type): Pass it to kmscon command.
* doc/guix.texi (Base Services): Document it.
Reported by pelzflorian (Florian Pelz) <pelzflorian@pelzflorian.de>.
Fixes <https://bugs.gnu.org/33171>.
* doc/guix.texi (Invoking guix-daemon): Remove sentence that suggests
that TMPDIR leaks into the build environment.
Ricardo Wurmus