be357a1aaa
Set up _NET_WM_SUPPORTED and window manager name again
...
This fixes MPlayer fullscreen mode
2010-05-15 00:28:10 +02:00
2d52ecf071
Add parameter to reparent windows instead of killing them when closing a container
...
Necessary because when windows are unmapped, they are not necessary to
be killed (an application can unmap it temporarily).
2010-05-15 00:16:59 +02:00
def41582d1
re-render the three after calling parse_cmd
2010-05-14 23:41:17 +02:00
8c5d824fa8
Ignore UnmapNotify events generated by reparenting
2010-05-14 23:37:56 +02:00
7adf921bc3
use the new parser for handling keybindings
2010-05-11 23:04:47 +02:00
5eae706427
grammar: s/layout_mode/window_mode
2010-05-11 23:04:21 +02:00
c75a6732bf
Implement 'restore' in new parser
2010-05-11 23:00:31 +02:00
a0e33c1d68
implement 'move' command in the new parser
2010-05-11 22:46:49 +02:00
98dbe63e35
Implement exec, exit, level, restart (without testcases for now)
2010-05-10 10:12:35 +02:00
6a1c34d2c5
Implement 'split'
2010-05-10 09:33:10 +02:00
145ebc7584
Implement 'prev', extend testcase
2010-05-10 09:08:31 +02:00
d8307f4b4a
implement 'next' in the new command parser (testcase unfinished)
2010-05-10 00:06:24 +02:00
f10a3d9b75
bugfix: really return focus list in IPC tree dump (instead of nodes list)
2010-05-10 00:00:43 +02:00
09523f36f5
also re-render the tree for commands using the new parser
2010-05-09 23:24:03 +02:00
65e9036837
bugfix: don’t clean up workspace when switching to the same workspace
2010-05-09 23:20:49 +02:00
0ea85c1b9d
implement 'fullscreen' command
2010-04-17 19:29:44 +02:00
b0f47b25a0
throw out some old code from manage.c, cleanups
2010-04-17 18:26:46 +02:00
7f3a77ac6a
loglevel bitmasks needs to be larger because we got more than 32 files
2010-04-17 17:46:11 +02:00
b93413ca49
remove old fullscreen code
2010-04-17 17:43:50 +02:00
6bf55dc356
implement con_toggle_fullscreen
2010-04-17 17:40:41 +02:00
c4d87e2f81
handle destroynotify events
2010-04-17 17:27:53 +02:00
d973f30fc2
push X11 changes after a window is mapped
2010-04-17 16:43:34 +02:00
68542f3c22
When assigning children to containers, reset their x window state
2010-04-17 16:41:20 +02:00
53dcebfd8a
put container in fullscreen mode if the fullscreen state is set when mapping
2010-04-17 14:21:34 +02:00
c56867792a
handle client messages (fullscreen window state)
2010-04-17 13:54:45 +02:00
22f38ebde4
clear current_match when dropping state
2010-04-17 12:57:06 +02:00
77ec4219c9
make floating an enum (we need three states, not only two)
2010-04-16 22:57:21 +02:00
8d05039b04
move match_* to match.c
2010-04-16 22:51:25 +02:00
bb220b27d7
check for empty matches
2010-04-16 22:50:20 +02:00
e0b7ae872e
move con_focus to con.c
2010-04-16 21:04:36 +02:00
4796798074
better debug messages
2010-04-16 21:02:34 +02:00
138a790cd0
clean up old workspace when switching (makes test 2 of t/16-*.t pass)
2010-04-16 20:59:21 +02:00
2534f21940
ignore sequence of unmapnotify events (generates enternotify events)
2010-04-16 20:56:49 +02:00
93600ce0fd
implement con_id for matching containers, extend testcase
2010-04-16 15:30:07 +02:00
769501420d
add first version of a new flex/bison based command parser
2010-04-14 20:26:56 +02:00
24725cd94a
re-add fullscreen mode
2010-04-13 20:51:43 +02:00
8959c5005f
cleanups
2010-04-13 19:33:40 +02:00
8e5a831e27
re-add focus follows mouse handling
2010-04-13 18:43:37 +02:00
eec762ea8f
more reformatting/cleanups
2010-04-13 17:52:23 +02:00
dd7acf73e9
re-add support for legacy window titles (WM_NAME)
2010-04-13 17:46:54 +02:00
fd8735a6fd
correctly update/display window title/class
2010-04-13 17:22:34 +02:00
bcfb0d2505
more reformatting
2010-04-13 16:48:42 +02:00
4206db2839
workspace.c: update header, reformat
2010-04-13 16:43:08 +02:00
6aa6fa0af0
correctly focus workspaces
2010-04-13 16:41:23 +02:00
c145f7e529
first step of the big refactoring ("tree" branch).
...
From here on, we can track changes. It made no sense to put the
development up to this point into git.
2010-04-13 13:17:39 +02:00
41b6631f68
Bugfix: null-terminate buffer
2010-03-26 03:04:54 +01:00
a542515f9e
Fix memory leaks
2010-03-26 01:52:39 +01:00
7bd4ea3699
randr: Don’t enable outputs with mode 0x0
...
Just a sanity check for some possibly broken drivers.
2010-03-26 01:52:08 +01:00
a151fd95a8
remove newlines
2010-03-26 00:28:30 +01:00
6fd56757f0
Bugfix: Assign all workspace to new outputs as new outputs get available (Thanks badboy)
2010-03-26 00:13:28 +01:00
1b8299002e
Bugfix: Translate keysyms to keycodes before entering mode (Thanks fallen)
2010-03-25 21:18:46 +01:00
6699d54640
Fix rendering of workspace names after "reload" (Thanks fallen)
2010-03-25 19:08:37 +01:00
469f22caeb
Bugfix: Correctly switch workspace when using the "jump" command (Thanks fallen)
2010-03-25 18:07:40 +01:00
2c42c0c760
Bugfix: Correctly check bitmask for floating_modifier
2010-03-25 02:53:53 +01:00
46e7cf5fe1
Handle destroy notify events like unmap notify events
...
This helps for windows which are immediately destroyed instead of
unmapped, like when starting i3status | ./foobar | dzen2 -dock
and foobar does not exist (i3status and dzen2 will get a SIGPIPE).
2010-03-24 16:52:16 +01:00
e90e80c87d
Bugfix: fix state of keypresses in sighandler (like in i3-input)
2010-03-24 16:10:47 +01:00
7eea1067f8
Bugfix: correctly translate coordinates for floating windows when outputs change
2010-03-24 16:09:43 +01:00
0f7ac09c7b
Bugfix: Don’t unmap windows when current workspace gets reassigned
...
Steps to reproduce were:
1) xrandr --output VGA1 --auto --left-of LVDS1
2) open a terminal on VGA1
3) xrandr --output VGA1 --off
2010-03-24 16:06:21 +01:00
56139f3656
Bugfix: only restore focus if the workspace is focused, not if it is visible
2010-03-23 14:43:35 +01:00
42b638eac0
Bugfix: Don’t enter BIND_A2WS_COND state too early (Thanks fallen)
2010-03-22 15:12:37 +01:00
77efb29d9f
ipc: send a workspace event when the urgency flag changes
2010-03-20 03:09:42 +01:00
35a791f7e6
ipc: also send workspace event when initializing a workspace for an output
2010-03-20 02:56:23 +01:00
46bd9ac58a
Bugfix: correctly re-assign dock clients when output goes inactive
2010-03-20 02:52:06 +01:00
aec40126b4
ipc: implement output event
2010-03-19 22:40:43 +01:00
4ce0d6f014
ipc: implement GET_OUTPUTS
2010-03-19 22:24:52 +01:00
a607eae53a
ipc: include the urgent flag in the workspaces reply
2010-03-19 22:01:21 +01:00
fdcbec248a
Start dock clients on the output they request to be started on according to their geometry
...
Use dzen2’s -xs option to use this, or specify the coordinates using
-x manually.
2010-03-19 21:44:36 +01:00
3c8c426011
Disable RandR if no outputs are found (Thanks fallen)
2010-03-19 18:51:19 +01:00
ee76b2ebf6
Bugfix: When disabling RandR/Xinerama, give a name to the pseudo-output (Thanks fallen)
2010-03-19 18:51:01 +01:00
af00df9321
Use DLOG for debug messages instead of printf (Thanks kruM)
2010-03-19 18:48:36 +01:00
0bb1b718d1
Fix compilation with the old xcb keysyms api
2010-03-19 16:02:33 +01:00
91b6c69eae
little style fix for the last commit
2010-03-19 01:43:11 +01:00
62c4532329
Bugfix: Take window out of fullscreen before entering floating mode.
2010-03-19 01:24:33 +01:00
1680071555
randr: use effective CRTC width/height, not its mode (Thanks moemoe)
...
This fixes setups which use panning and cloning.
2010-03-17 15:56:26 +01:00
a604af6340
make pointer follow the focus when moving to a different screen also for floating windows
2010-03-17 03:18:13 +01:00
b47d0a8932
Bugfix: configure floating windows above tiling windows when moving them to another workspaces (Thanks Sasha)
2010-03-17 00:36:08 +01:00
f7a1a9fb20
ipc: correctly shutdown IPC sockets when exiting/restarting
2010-03-16 02:44:47 +01:00
f9e6f8ba4b
Bugfix: Correctly stack windows when new windows are opened while in fullscreen mode
...
This fixes ticket #195 .
2010-03-15 22:17:00 +01:00
c738b2e454
Don’t use SYNC key bindings for Mode_switch but re-grab keys
...
Before this commit, i3 used key bindings in SYNC mode for bindings
like Mode_switch + <a> and replayed the key if the current state
did not include Mode_switch. This had some problems:
1) The WM needed to acknowledge much more key presses than you
actually had bindings for, thus making the system a bit laggy
sometimes.
2) Users of layouts who constantly type in the third level (like
russian layouts) did not get their cyrillic symbols correctly
(they were not replayed right), neither did the keybindings
work in both modes.
So, the current implementation uses the following approach: XKB
provides an event which contains the current state (including
the current level). i3 signs up for this event and upon receival,
it re-maps the bindings using Mode_switch (enables them when the
level goes to the third level and disables them as soon as the
level goes back to normal). This fixes both problems.
2010-03-14 22:40:58 +01:00
2df1fb8ac8
Implement disabling the internal workspace bar
2010-03-14 12:59:45 +01:00
2df374ca4c
Add configuration option to turn off workspace bar
2010-03-13 19:15:28 +01:00
b6088b803e
ipc: correctly set "focused" for workspaces
...
Didn’t work on empty workspaces before
2010-03-13 16:27:03 +01:00
9cb35383a8
Implement proportional floating-resize.
2010-03-13 13:22:39 +01:00
3db4890683
ipc: implement events, cleanup the code a bit
2010-03-12 21:05:05 +01:00
d86531b958
ipc: return logical workspace numbers, not internal ones
2010-03-12 15:59:38 +01:00
d6f726283c
ipc: also send a reply for COMMAND messages
2010-03-12 15:29:44 +01:00
5a3d1b38e8
ipc: Correctly deal with SIGPIPE/failing write()s
...
If a client disconnects while i3 still wants to write the reply, this
could lead to exits of i3 before.
2010-03-12 15:02:00 +01:00
0f5256dc72
Floating resize uses arbitrary corners
...
This closes ticket #121
2010-03-12 03:11:20 +01:00
9ed5e00107
ipc: change active to visible, introduce focused
...
visible == currently visible on the output it is on
(multiple workspaces can be visible at the same time)
focused == has the focus (only one workspace can be focused)
2010-03-12 03:01:34 +01:00
7c1be83692
Update comment (Thanks Merovius)
2010-03-12 02:59:16 +01:00
5f370b494c
bugfix: don’t remap stack windows errnously when changing workspaces
...
This fixes ticket #193 (long-standing rendering bug).
2010-03-12 00:41:40 +01:00
93a9f3c244
Bugfix: Don’t mess up x/y coordinates in configurerequests for floating windows
...
This was the cause for ticket #93 , which actually has a false
conclusion for the reason of this bug.
This code needs to be refactored.
2010-03-11 23:34:29 +01:00
e11ca75407
ipc: add active flag
2010-03-11 16:48:48 +01:00
9a9ba1b859
ipc: implement GET_WORKSPACES message type
...
This is the foundation to use dzen2 or similar as a complete
replacement for the internal workspaces bar.
A testcase is included, more documentation about the IPC interface
will follow.
2010-03-11 15:58:39 +01:00
f7c8e76782
Select containers above or near the whole snapped width/height
...
This fixes ticket #100 , and is best explained using a little example.
Consider the following layout:
+---+---+
| | X |
+---+---+
| X |
+---+---+
Where X marks a window, so you have an empty container in the upper
left, the container on the bottom is snapped to the right. Before
this commit, nothing would happen when focusing "above". After
this commit, the upper window gets focused.
2010-03-11 00:15:34 +01:00
a70f4353b7
Fix predict_text_width by using xcb_query_text_extents
...
This fixes ticket #173 , at least for the rendering errors.
I don’t really know why I implemented predict_text_width like it
was before (querying the whole table and pulling out information
one by one). Maybe I have overlooked xcb_query_text_extents. In
any case, it works better now.
2010-03-10 23:27:24 +01:00
bd76e994b8
Re-add old Xinerama code for the poor nvidia users
...
Add --force-xinerama when starting i3 to use Xinerama instead of RandR.
This should *ONLY* be done if you have no other choice (nvidia’s
binary driver uses twinview and does not expose the monitor information
through RandR).
2010-03-09 21:25:54 +01:00
4dfe61c2d4
Fixes for the last commit: check outputs instead of workspaces, correctly reset state when switching workspaces, little style fixes
2010-03-08 11:15:31 +01:00
9c77b0f9a1
Implement screen-spanning fullscreen-mode (command: 'fg')
...
This closes ticket #188
2010-03-08 11:15:31 +01:00
85308715ea
Turn nested functions into real functions or macros
...
This enables compilation with llvm-clang and thus closes ticket #101 .
While it makes the code more ugly, I don’t see a beautiful solution
which would enable us to stay with the more elegant solution of
nested functions and still allow compilation with any other compiler
than gcc.
2010-03-07 19:00:34 +01:00
46642d0e45
For num_clients == 0, the last fix is also valid
2010-03-06 16:58:20 +01:00
afc922ef57
Avoid more errors by not trying to re-create a stack win with height == 0
2010-03-06 16:51:17 +01:00
e9ef672c36
Don’t render if no stack_window has been opened
...
This could happen when you have only one client in a stacking/tabbed
container. While not being a critical bug, this avoids X errors.
2010-03-06 16:34:07 +01:00
6be76e4c56
Remove trailing whitespace
2010-03-05 23:26:45 +01:00
4e9c6515f3
Changing to stacking/tabbing toggles mode to default if already in stacking/tiling.
2010-03-05 23:25:34 +01:00
f1a011c014
Clear urgency hints set by i3 (see HEAD~2)
2010-03-05 20:03:38 +01:00
c367eaa369
put windows with WM_CLIENT_LEADER on the workspace of their leader
...
This fixes ticket #163
2010-03-05 18:01:32 +01:00
40475b250f
Allow unsetting WM_CLIENT_LEADER (XCB_NONE is not an invalid value)
2010-03-05 17:42:50 +01:00
8d648b4e37
Update function names, variable names and documentation for the RandR changes
2010-03-05 16:18:41 +01:00
8b192ac7ed
Bugfix: Correctly hide/show workspaces when enabling new outputs, correctly handle focus (Thanks Merovius)
2010-03-05 15:22:12 +01:00
718d62a3cd
Bugfix: Fix clone mode with new RandR code (Thanks Merovius)
2010-03-05 14:32:48 +01:00
d73f1748db
Remove superfluous definitions (Thanks Merovius)
2010-03-05 01:59:52 +01:00
85437877e8
fix comment (Thanks Merovius)
2010-03-05 00:09:52 +01:00
3cfe1b35e0
Update fullscreen client position/size when an output changes (Thanks Merovius)
...
This fixes #187 .
2010-03-03 09:32:31 +01:00
0ec3481c69
draw consistent borders for each frame in a tabbed/stacked container
...
The condition was a relict from older rendering code, I think.
This fixes #172 .
2010-03-03 08:49:07 +01:00
187c72fa96
sighandler: only display on active outputs
2010-03-03 08:48:57 +01:00
e5f222e03e
Save a resize_client() when handling the size hints
2010-03-03 01:23:38 +01:00
7839b7a4fe
Bugfix: checked for wrong flag in size hints
2010-03-03 01:23:38 +01:00
5dbcb0158f
When in fullscreen mode, focus whole screens instead of denying to focus (Thanks dothebart)
...
This fixes ticket #169 .
2010-03-02 15:45:48 +01:00
e3e7ebe23a
Bugfix: only return active screens in get_screen_most
2010-03-02 15:45:03 +01:00
4e69bd65c0
Move autostart after creating the IPC socket in start process (Thanks Sasha)
...
This fixes ticket #179 .
2010-03-02 15:30:23 +01:00
b53c5861a2
Restore geometry of all windows before exiting/restarting (Thanks Sasha)
...
This fixes ticket #185
2010-03-02 15:25:08 +01:00
d08ec00329
use scalloc instead of some places where calloc was still used
2010-03-02 14:42:24 +01:00
aae824b1f3
Change workspace assignments to use the RandR output name instead of <screen>
2010-03-02 13:35:43 +01:00
818e02ef35
huge change: implement RandR instead of Xinerama
...
Thanks to Merovius for doing a proof of concept on this one and
being a driving force behind the idea.
Using RandR instead of Xinerama means that we are now able to use
the full potential of the modern way of configuring screens. That
means, i3 now has an idea of the outputs your graphic driver
provides, which allowed us to get rid of the ugly way of detecting
changes in the screen configuration which we used before. Now, your
workspaces should not be confused when changing output modes anymore.
Also, instead of having ugly heuristics to assign your workspaces
to (the screen at position X or the second screen in the list of
screens) you will be able to just specify an output name.
As this change basically touches everything, you should be prepared
for bugs. Please test and report them!
2010-03-02 12:47:21 +01:00
6f72970ece
add xcb_set_window_rect which configures a window according to a Rect
2010-02-28 20:35:30 +01:00
7caf98dd18
Move update_if_necessary to util.c, will be necessary later
2010-02-28 18:39:11 +01:00
e209fd7d3a
docs: the comparison is size and position, not only size (Thanks Merovius)
2010-02-22 07:09:17 +01:00
4fcbb7980e
work around clients setting 0xFFFF as resize increments
...
I am not sure if behaviour is specified for this case, but as the
workaround is not really a big deal, why bother…
2010-02-20 20:32:43 +01:00
432f06a21e
Add missing carriage return (Thanks fallen)
2010-02-16 19:55:04 +01:00
e225742415
Make the warning about $terminal being deprecated an error (Thanks fallen)
2010-02-16 19:25:07 +01:00
e78bb02082
parser: ignore errors
2010-02-14 16:59:22 +01:00
2af2bc36c9
Document the new options
2010-02-13 19:58:43 +01:00
64cf88403d
lexer/parser: proper error messages
...
Error messages now look like this:
13.02.2010 19:42:30 - ERROR:
13.02.2010 19:42:30 - ERROR: CONFIG: syntax error, unexpected <word>,
expecting default/stacking/tabbed or stack-limit
13.02.2010 19:42:30 - ERROR: CONFIG: in file "inv", line 15:
13.02.2010 19:42:30 - ERROR: CONFIG: new_container foobar
13.02.2010 19:42:30 - ERROR: CONFIG: ^^^^^^
13.02.2010 19:42:30 - ERROR:
2010-02-13 19:42:54 +01:00
79a4e30488
parser: enable verbose error messages, add aliases to tokens
2010-02-13 15:27:43 +01:00
e446747812
Also warp the pointer when moving a window to a another visible workspace (Thanks Thomas)
2010-02-12 16:19:58 +01:00
87f8c501da
Bugfix: Correctly do boundary checking/moving to other workspaces when moving floating clients via keyboard (Thanks sasha)
2010-02-12 13:06:59 +01:00
0b6b8e8380
Bugfix: Use both parts of WM_CLASS (it contains instance and class) (Thanks fallen)
...
Actually, WM_CLASS contains two null-terminated strings, so we cannot
use asprintf() to get its value but rather use strdup() to get both
of them. Both values are compared when a client is matched against
a wm_class/title combination (for assignments for example).
2010-02-12 12:12:25 +01:00
88b9700cdb
Invert logic for the last commit
...
This makes it more clear that the option is meant to be a special
case (it *disables* part of the focus handling). Also, when
initializing the config data structure with zeros, it will get
initialized with the right value.
Furthermore, the config file parser now also accepts various values
which represent "true", not only numbers.
2010-01-29 21:58:50 +01:00
7f10970fc7
Added focus_follows_mouse config option
2010-01-29 21:58:50 +01:00
36909c6e3b
Fixed cursor code in create_window(), allowing the cursor to be changed
2010-01-26 11:28:38 +01:00
148547c765
Fixed cursor orientation when resizing
2010-01-26 11:28:37 +01:00
7270b74732
Implement resize command for floating clients
2010-01-23 18:57:29 +01:00
fde11f9a5c
Bugfix: Don’t leak IPC socket to launched processes
2010-01-23 00:34:29 +01:00
c606d93630
Feature: Cycle through workspaces
...
On command pw/nw, cycle through all workspaces (starting from
previous/next one) until we reach the current one again.
2010-01-19 12:10:45 +01:00
d949a335e6
bugfix: lexer: return to INITIAL state (Thanks dirkson)
...
'floating_modifier' after 'workspace' did not work because of wrong
state
2010-01-08 18:56:01 +01:00
af0b33bcc3
Bugfix: if a font provides no per-char info for width, fall back to the default (Thanks Ciprian)
2010-01-07 14:38:00 +01:00
b6de565445
Bugfix: Use ev_loop_new instead of ev_default_loop because the latter one blocks SIGCHLD (Thanks Ciprian)
...
SIGCHLD was inherited to child processes started by i3 and not
all of them unblocked it (shells generally did, though), leading to
zombie processes.
2010-01-07 13:36:52 +01:00
44191d5ffc
sighandler: last little style fixes
2010-01-03 22:07:39 +01:00
2b1a132c39
grab the pointer inside the signal handler popup
2010-01-03 22:02:07 +01:00
be33c8e599
Check return code of sigaction()
2010-01-03 21:55:22 +01:00
a69dfb3f06
Remove expose event mask, expose events will not be generated in any case
2010-01-03 21:55:02 +01:00
7b2363776a
Use DLOG instead of LOG, remove unnecessary debug statement
2010-01-03 21:54:47 +01:00
0c35573e51
some little style changes
2010-01-03 21:54:26 +01:00
8afdf54078
Update copyright to 2010
2010-01-03 21:53:30 +01:00
614b360bd4
added popup for handling SIGSEGV or SIGFPE
...
the popup is placed on each of the virtual screens
the user can decide to restart or quit i3
in case of an exit a core-dump is generated
2010-01-03 21:32:50 +01:00
715983024d
ewmh: Don’t push workspaces with width=0 and height=0 (Thanks Atsutane, badboy)
...
Even though i3 cannot know the width/height of some workspaces as
long as they are not initialized (say you used workspace 1 and 3,
but not workspace 2), some applications require this information.
In this case, it was Firefox which intersects the available workareas
(see mozilla/gfx/src/gtk/nsScreenGtk.cpp) and did not position some
windows correctly when being confronted with zero-width/height
workspaces.
2010-01-03 18:36:50 +01:00
7c130fb540
Obey the XDG Base Directory Specification for config file paths
...
This means you can now put your i3 config into
$XDG_CONFIG_HOME/i3/config, which probably is ~/.config/i3/config
if not set otherwise.
2010-01-03 16:58:41 +01:00
ba2dd3a3eb
Bugfix: Containers could lose their snap state (Thanks Atsutane)
...
When being on a different workspace than the one where the snapped
container is, the function to cleanup cols/rows would clean up too
much.
2010-01-01 22:40:50 +01:00
092f3139d8
Remove superfluous #include <assert.h> (Thanks badboy)
2010-01-01 17:30:27 +01:00
65cae2cad1
Bugfix: Don’t put dock clients into floating mode (Thanks xeen)
2010-01-01 16:19:42 +01:00
75aac5bc02
ewmh: implement support for _NET_WORKAREA (rdesktop can use that)
...
Please note that rdesktop’s -g workarea option will not work on
64-bit systems at the moment because of a bug in rdesktop (see the
rdesktop-devel mailing list).
2009-12-31 17:48:41 +01:00
e7e9e8e49d
ewmh: correctly set _NET_ACTIVE_WINDOW
2009-12-25 15:19:39 +01:00
0641e6a1a3
ewmh: correctly set _NET_CURRENT_DESKTOP to the number of the active workspace
2009-12-25 15:05:17 +01:00
ba82a3e63b
Bugfix: Fix NULL pointer dereference in workspaces which have preferred screens but were not used yet (Thanks badboy)
2009-12-23 00:39:03 +01:00
3e53ecf69e
retab! src/container.c
2009-12-22 23:43:05 +01:00
848d9c1b01
Make containers containing exactly one window behave like default containers
...
Starting from this commit, a borderless window will always be
borderless if it is the only window in a container. For example,
you can have Firefox borderless in a tabbed container and as soon
as the download manager or a viewer gets opened, the container
will be rendered like a normal tabbed container.
This solves the user-interface dilemma of borderless/1-px-border
windows inside stacked/tabbed containers, at least for this special
case. Thanks to Merovius for this suggestion.
2009-12-22 23:40:06 +01:00
9df64a8d0a
Correctly exit when another window manager is already running
...
This is implemented by checking if setting the redirect mask returned
an error or not.
2009-12-22 11:29:24 +01:00
e900a8d23d
xinerama: correctly put windows which are assigned to a specific screen on that screen when it becomes available (Thanks badboy)
2009-12-21 22:30:08 +01:00
0b5554c762
xinerama: change some log messages to errors
2009-12-21 20:41:02 +01:00
6ef0d1fa79
Touch each log message and classify it as DLOG (debug), ELOG (error) or LOG (verbose)
2009-12-19 22:40:23 +01:00
37d795c81d
Add new options -V for verbose mode and -d <loglevel> for debug log levels
2009-12-19 22:40:23 +01:00
4226cc61de
add log.c/log.h which contain all the log related macros and functions
2009-12-19 22:40:23 +01:00
937048d47b
Distribute rest space between windows as long as possible. (Thanks msi)
...
When having 8 windows in a container which has 766 px available,
you ended up losing 0,75 px per window which would quickly sum up.
Now, the rest space (6 px in this example) is distributed in units
of one pixel to as many windows as possible.
2009-12-13 17:02:22 +01:00
f87b98e0a7
Take into account the window’s base_{width,height} when resizing (Thanks Mirko)
2009-12-12 22:27:57 +01:00
8d8804221b
Partly revert 4ba26659, it was just wrong.
2009-12-12 21:42:56 +01:00
c6c0862e24
Bugfix: Correctly check for fullscreen windows when mapping new clients
...
CUR_CELL only works if you currently are in that container (not for
windows which are assigned to invisible workspaces, for example).
2009-12-12 21:31:41 +01:00
4afe65eea2
Bugfix: Correctly place new windows below fullscreen windows (Thanks Moredread)
...
This bug could happen if you have floating and tiling windows (for
example Firefox in tiling mode and its Open dialog in autmatically
floating mode) and you opened a new tiling window while in fullscreen.
i3 would then place the window below the floating windows, but
floating clients are above fullscreen windows. Thus, the client
would be placed above the fullscreen window.
2009-12-12 21:29:07 +01:00
ffe925f733
Bugfix: Fix assignments to not yet visible workspaces
...
This was broken by commit 5a1668db3
2009-12-12 18:43:30 +01:00
17082ef5b7
Bugfix: close file handle after parsing
2009-12-11 17:57:42 +01:00
e5c4fa6c1c
Include unistd.h for usleep()
2009-12-08 20:55:17 +01:00
ddf3119552
Bugfix: Don’t resize client after base_height changes if client is in fullscreen mode
2009-12-08 20:52:19 +01:00
befd7f6f22
Bugfix: Use more precise floating point arithmetic (Thanks helgiks)
...
This prevents errors in rounding leading to an unoccupied space of
-1 which in turn leads to infinity when calculating the new size
of a container after resizing.
2009-12-08 11:48:25 +01:00
1a53cc067b
When no screens are found, don’t hog the CPU. Also, wait longer for screens (10 seconds).
...
Instead of just going on, i3 will exit cleanly now, putting an
appropriate message into the logfile.
2009-12-07 16:31:49 +01:00
ec2e5e8364
Bugfix: Fix two problems in resizing floating windows with right mouse button (Thanks Mirko)
...
Minimum width/height was not consistent with the limit for grabbing
and resizing a window at its border.
If one of both was violated (width < min_width for example), none
of them were updated.
2009-11-26 22:17:38 +01:00
5a1668db36
Bugfix: Render containers after setting the client active (Thanks Mirko)
...
This lead to race conditions when the window did not change its title
after mapping and was displayed in a tabbed container.
2009-11-26 21:32:53 +01:00
5329ed0158
Bugfix: Resize client after updating base_height/base_width (Thanks Merovius)
...
This fixes the problem that urxvt/xterm "lost" a line of space before
being resized the first time.
2009-11-23 09:42:38 +01:00
d2a88f7089
Bugfix: Don’t ignore urgency flag when the client wants to clean it (Thanks Syntropy)
2009-11-23 08:35:40 +01:00
4ba26659fd
Bugfix: Fix stack-limit cols, handle stack-limit cols on tabbed containers (Thanks jace)
2009-11-22 22:48:08 +01:00
4ace0d2138
config: delete old parser, new lexer/parser is the default by now
2009-11-22 20:25:33 +01:00
52945486fd
Bugfix: Also fix horizontal resizing
...
The same problem as in the commit before this one was present. Additionally,
the dock_clients and internal bar were not taken into account everywhere.
2009-11-22 14:32:40 +01:00
2c8b041500
Bugfix: Correctly calculate width when resizing (Thanks Merovius)
2009-11-22 14:05:35 +01:00
29464dc791
Bugfix: Don’t set the urgency flag if the window is currently active
2009-11-20 15:55:54 +01:00
c0256edd2e
Bugfix: Accept underscores in bindsym (Thanks jace)
2009-11-20 15:33:38 +01:00
c5da7bd266
Bugfix: Fix resizing of floating windows in borderless/1-px-border mode (Thanks Grauwolf)
...
Calculations were wrong (they simply didn’t take into account that
there is more than one border style, the code was from before we
implemented that…). We cannot directly set child_rect to the coordinates
as resize_client takes rect and calculates the child_rect, so we need
the new lines of code for this bugfix in any case (rect needs to be
updated).
2009-11-18 22:53:17 +01:00
82c32616e1
Bugfix: Correctly clear the urgency hint if a window gets unmapped without clearing the hint
2009-11-18 20:20:54 +01:00
6a5bdf6f8e
Bugfix: Also allow WORDs as workspace names (Thanks Grauwolf)
2009-11-18 19:53:57 +01:00
fb04388289
Bugfix: Don’t hide window titles in tabbing mode (Thanks badboy)
2009-11-15 17:35:15 +01:00
d266474f97
Remove the terminal option from config.
...
The welcome message is displayed using xmessage(1), not using your
terminal. Thus, it makes no sense to have this option anymore. Also,
the new lex/yacc parser cannot correctly handle the situation:
normal variables are expanded before parsing the file. As a replacement,
you can use:
set $terminal /usr/bin/urxvt
2009-11-13 20:36:59 +01:00
aa2e0d7d14
Bugfix: Correctly replay pointer if the click handler does not trigger (Thanks merovius)
2009-11-13 20:22:23 +01:00
d48a515752
Bugfix: Correctly switch border types for floating windows (Thanks msi)
2009-11-13 19:55:34 +01:00
51b937741d
Bugfix: Don’t draw window title when titlebar is disabled (Thanks msi)
2009-11-13 19:46:07 +01:00
c0c4dd2978
Disable XKB instead of quitting with an error (Thanks sur5r)
...
This is necessary for running i3 in Xvnc for example.
2009-11-13 00:30:42 +01:00
4b1bb7d19a
Add ctrl as synonym for control
2009-11-12 20:28:09 +01:00
47ebb9e1dd
Fix compilation warning on OpenBSD (Thanks bapt)
2009-11-10 00:07:40 +01:00
bf728be09b
parser: Use right parameter, suppress warning about expected shift/reduce conflict
2009-11-09 22:36:26 +01:00
f2dcc36333
Bugfix: WHITESPACE was missing in front of the workspace name (Thanks Mirko)
2009-11-08 21:43:47 +01:00
316f62dfda
Fix rendering of 1-px-border windows which require background filling
2009-11-08 13:04:14 +01:00
f1ecf08df5
s/for(/for (/
2009-11-08 12:45:33 +01:00
64c99cb235
Implement configuration setting to change the default border of windows
2009-11-08 12:43:01 +01:00
876417f49d
Bugfix: Don’t access wrong parameter (Thanks atsutane)
2009-11-07 16:51:10 +01:00
037605e34c
Use nicer colors for focused_inactive by default
2009-11-06 18:41:17 +01:00
5583dfa5e4
parser: Solve last shift/reduce conflicts
2009-11-06 17:26:17 +01:00
8e1945a990
parser: solve shift/reduce conflict by moving WHITESPACE token to the right place
2009-11-06 17:19:01 +01:00
6aab45e7a4
configfile: make whitespace optional for modes (Thanks tsdh)
2009-11-06 15:42:03 +01:00
3b05d9df60
Bugfix: Cleanup stack window also when in tabbing mode (Thanks litemotiv)
2009-11-04 22:37:43 +01:00
dd086864ce
Apply fix of the previous commit also for columns
2009-11-04 22:12:15 +01:00
2a0278b519
Bugfix: Switch layout mode after initializing all containers in a new row
2009-11-04 22:10:26 +01:00
2a0b1adab9
Also support xcb-keysyms < 0.3.4 when using bindsym (Thanks ch3ka)
2009-11-02 23:15:08 +01:00
0d327b7d17
Fix compilation warning
2009-11-02 23:14:21 +01:00
de3ca5c600
Bugfix: Ignore trailing/leading whitespaces when defining a mode (Thanks badboy)
...
…and shame on you for trailing/leading whitespace :).
2009-11-02 23:13:22 +01:00
a817519c0d
Bugfix: Prevent a division through zero (Thanks xeen)
2009-10-29 00:33:20 +01:00
16d33ec9df
Bugfix: Correctly re-assign dock_clients to the first screen when their screen disappears
...
This could lead to a null-pointer dereference when closing dock
clients that got lost.
2009-10-28 15:37:34 +01:00
fe2e4991d8
Bugfix: Use the right pointer for bar.* colors (Thanks shatter)
2009-10-23 23:13:38 +02:00
15d83d472b
Fix debug message in cfgparse.y (Thanks shatter)
2009-10-23 22:57:35 +02:00
80551834d2
Bugfix: Allow dock clients to reconfigure their height (Thanks Grauwolf)
2009-10-23 16:07:03 +02:00
da97b89b31
Bugfix: Don’t allow moving/resizing of fullscreen windows (Thanks xeen)
2009-10-13 08:26:35 +02:00
04884ab8cd
Bugfix: Fix NULL pointer dereference when reconfiguring screens
...
This did not happen all the time. It seems like you need to have a
container which is in stacking/tabbing mode on the screen which
is being reconfigured. (when doing xrandr --output VGA1 --off for
example)
2009-10-12 18:31:31 +02:00
2b679c6b9e
Fix HEAD^
2009-10-11 14:30:57 +02:00
d4ff702f19
Bugfix: Also apply the fix of 74ccdb4 when re-querying xinerama screens (Thanks Scytale)
2009-10-11 14:28:27 +02:00
3779f9292f
Bugfix: IPC: Correctly handle the case when multiple messages get received at once via the socket
...
When the sending application was so fast (*cough*) that the messages
could get queued by the kernel, it may happen that we receive multiple
messages at once.
2009-10-07 21:49:24 +02:00
ad84c07c8a
Bugfix: Correctly position bar window when using xrandr --below or --above (Thanks Mirko, dirkson)
2009-10-07 20:52:53 +02:00
44c4c9d5a6
Bugfix: Go to the target workspace before changing focus on goto command (Thanks yurifury)
2009-10-07 20:41:21 +02:00
df58981b57
Bugfix: Correctly restore the focus to the root screen after unmapping the last client (Thanks Rasi)
...
Sometimes, it may happen that the focus is "nowhere" and thus the
user is stuck. This was often the case with opera, sometimes with
pcmanfm. See ticket #118 .
2009-10-07 20:26:13 +02:00
f72161d0c2
Bugfix: parser: Correctly generate colorpixels from hex codes
2009-10-01 12:29:27 +02:00
6aa0f965d2
Fix warnings in lexer/parser
2009-09-29 22:47:37 +02:00
c4df9f1d95
Bugfix: Correctly initialize workspaces when initializing > 1 workspace (Thanks Mirko)
2009-09-29 22:25:08 +02:00
2b70e05ee9
Refactor workspaces to be stored in a TAILQ instead of an array
...
This fixes many problems we were having with a dynamically growing
array because of the realloc (pointers inside the area which was
allocated were no longer valid as soon as the realloc moved the
memory to another address).
Again, this is a rather big change, so expect problems and enable
core-dumps.
2009-09-29 19:45:41 +02:00
5a77081c55
Bugfix: When rendering, skip containers which are not yet initialized
...
This is necessary now, because when creating a new row, several
containers have to be created. Since the implementation of the default
mode for containers, this also involves rendering the layout. However,
when rendering the layout, all of the containers are potentially
accessed…
2009-09-29 12:26:53 +02:00
9ec6ea61de
Bugfix: Don’t crash when changing workspace when there is more than one column
2009-09-29 12:21:07 +02:00
ff0e9bb954
Bugfix: Fix parsing symbols which contain numbers, like F1 or 1 for bindsym (Thanks Rasi)
2009-09-29 11:32:57 +02:00
095de9eaab
Bugfix: partly revert f3880928, client->workspace was not updated (Thanks msi)
2009-09-29 01:07:51 +02:00
bfd704c523
Fix syntax for resize command
2009-09-29 00:54:27 +02:00
d230b2bb1a
Bugfix: Create new workspace when there are no free existing ones to assign (Thanks msi)
...
As the workspaces are now created dynamically, we cannot rely on
the workspaces to be there when we need them without creating them.
On the other hand, this eliminates the case that there are no workspaces
to assign to a new screen, because now we can just create one.
2009-09-28 18:02:11 +02:00
e101940c5e
Implement options to change the default mode of containers
...
The following new directives have been implemented for the configuration
file:
new_container <default|stacking|tabbed>
new_container stack-limit <cols|rows> <value>
Note that they require using the new lexer/parser, which you can
do by passing -l to i3 when starting.
2009-09-27 23:08:27 +02:00
fa868ed61c
Bugfix: parser: limit of 10 workspaces is gone
2009-09-27 23:05:07 +02:00
226664d288
Remove debug message
2009-09-27 23:04:41 +02:00
058d9cc3a2
Handle ipc_socket like ipc-socket
...
We should use underscores to be consistent
2009-09-27 20:44:24 +02:00
8f67eba044
Implement modes. Modes allow you to use different keybindings and switch between them.
...
For example, you can create a mode which will let you resize windows
with some easy to use keys. So, instead of binding a combination
of your homerow and modifiers to resize, like this:
bind Mod4+44 resize right +10
bind Mod4+45 resize right -10
...
You can instead define a new mode:
mode "resize" {
bind 44 resize right +10
bind 45 resize right -10
...
bind 36 mode default
}
bindsym Mod4+r mode resize
So, if you press Mod4+r now, your keybindings will be set to the ones
defined in your resize mode above. You can then use your homerow
(without any other modifier) to resize the current column/row and
press enter to go back to the default mode when you are done.
Note that using this option requires you to enable the new lexer/parser
by passing the -l flag to i3 when starting.
2009-09-27 18:45:39 +02:00
97d949d16c
Bugfix: Correctly re-grab keys when using the new lexer
2009-09-27 18:45:17 +02:00
d916e075c3
parser: Implement parsing mode sections
...
Wait for further commits before they are actually used.
2009-09-27 17:02:13 +02:00
051caf571d
retab! cfgparse.y
2009-09-27 17:02:05 +02:00
55f4e5ab68
Add vim modeline to lexer/parser
2009-09-27 17:01:06 +02:00
c2a42dd503
lexer: Allow whitespace before comments
2009-09-27 17:00:37 +02:00
9b1699f4c4
Add documentation for workspace_get()
2009-09-27 15:20:47 +02:00
f38809288a
Make number of workspaces dynamic (no longer limited by 10)
...
Warning: This is not yet thoroughly tested, so be prepared to
encounter some segfaults. Please enable logging and coredumps,
so we can fix bugs quickly.
2009-09-27 14:00:54 +02:00
a55d0b77fe
Implement resize command
...
Syntax: resize <left|right|up|down> [+|-]<pixels>
2009-09-26 17:18:50 +02:00
7be41492c6
Obey the client’s border_width setting (Thanks shatter)
...
xterm by default sets a border_width of 2. This was not taken into
account when determining the size of the window by i3. Still, you
probably want to set this to 0 in your .Xresources as the pixels
are just lost.
2009-09-26 13:47:48 +02:00
b898058105
Fix some compilation warnings (Thanks mxf)
2009-09-26 13:30:32 +02:00
2493c4b232
Bugfix: Fix resizing on second monitor (Thanks litemotiv)
...
We now use the virtual screen’s size/position instead of the X root
window for the grabwin (grabwin = the area in which the pointer may
move when resizing).
2009-09-25 18:08:37 +02:00
f4ec7fdfe9
Implement stack-limit for further defining how stack windows should look
...
Using this command, you can limit the amount of columns or rows for
a stacking container. This allows for better usage of screen estate
when using stacking containers with many clients.
Examples:
i3-msg "stack-limit cols 2"
You will now have a stack window which has two columns of windows.
2009-09-22 18:07:59 +02:00
d3752007ed
Remove old code
2009-09-22 18:07:48 +02:00
d9ca8e8d1a
Move handler for clicking to its own file
2009-09-22 18:07:25 +02:00
3ada8f326c
Implement vim-like marks
...
Commands are 'mark' and 'goto'. Both can be used either directly,
like 'mark a' and 'goto a', or interactively (just 'mark'). For
interactive mode, i3-input must be installed and in your PATH.
2009-09-20 16:54:29 +02:00
0e8b87e9da
lexer: Implement workspace <number> "<name>"
2009-09-19 19:39:06 +02:00
0ed2d62263
lexer: return HEX instead of NUMBER when parsing colors
2009-09-19 19:34:02 +02:00
b1ebbde153
Merge branch 'lex' into next
2009-09-19 19:06:57 +02:00
ca472559b9
Finish configfile parsing with lexer, implement -l to use the lexer.
...
Every user is encouraged to use -l to switch to the new lexer and
see if there are any problems.
2009-09-19 19:05:15 +02:00
775d3a0d91
Make gcc happy about some possibly uninitialized variables (Thanks badboy)
...
This warning only showed up with CFLAGS=-O2.
The variables in question could never be uninitialized because
they were definitely set, have a look at the code. But anyways,
less warnings is always a good thing ;-).
2009-09-15 16:58:10 +02:00
207ad0a7df
Implement most code to actually set the configuration settings
2009-09-13 22:13:28 +02:00
7fda4a2c32
Make variable expansion work with the new parsing
2009-09-13 21:32:58 +02:00
2986636e03
Fix some parsing problems, retab!
2009-09-13 18:40:35 +02:00
268bf71222
Implement option -p to test if the lexer/parser can parse your configfile (specify -c before)
2009-09-13 14:54:27 +02:00
9dd975e974
Add first version of lexer/parser to git, update Makefile
2009-09-13 14:16:39 +02:00
30ad7e93e7
Bugfix: Re-distribute free space when closing rows which were horizontally resized
2009-09-12 19:58:39 +02:00
ce40f79c47
Implement right mouse button + dragging to resize tiling clients aswell
2009-09-12 19:51:50 +02:00
6f2638f526
Bugfix: Correctly warp pointer *after* rendering the layout
...
This is necessary because otherwise the window into which the
pointer is warped still is at its old position, so that the pointer
will effectively be warped onto the wrong screen in case of moving
a window to another screen.
2009-09-12 18:46:52 +02:00
739f4f35aa
Compilation fix for the last commit
2009-09-12 18:34:03 +02:00
3b59f5829f
Bugfix: Correctly initialize workspaces for floating clients, too
2009-09-12 18:18:41 +02:00
4d01a02dba
Bugfix: Correctly initialize workspace when moving clients (Thanks tsdh)
2009-09-12 18:15:32 +02:00
cef5778097
Bugfix: Fix clicking on stack windows in tabbed mode (Thanks Atsutane)
2009-09-10 21:05:29 +02:00
bf043cd2bd
Some little style adjustments for badboy’s patch
2009-09-10 18:48:16 +02:00
40bc7c93d0
Implement command to toggle border style
...
Use 'bt' to toggle from normal to 1-px, borderless and back.
2009-09-10 18:44:27 +02:00
ff1ae52e6b
Fix compilation warning because of missing braces
2009-09-10 16:29:23 +02:00
9f02fb7a3a
Bugfix: Don’t handle WM_HINTS if it is not set (Thanks mxf)
2009-09-10 16:27:50 +02:00
e4813d009a
Bugfix: Correctly handle unmap-notify events when resizing (Thanks Mirko)
2009-09-07 21:18:44 +02:00
2ff2a6a315
Implement the urgency hint for windows/workspaces
...
Thanks to Mikael for bringing it to my mind. This change introduces
two new color classes, client.urgent and bar.urgent. By default,
urgent clients are drawn in red (colors by Atsutane).
2009-09-06 22:40:11 +02:00
e893902585
Implement horizontal resize
2009-09-06 16:50:45 +02:00
a81108c527
Bugfix: Initialize screens correctly when not using Xinerama (Thanks Mikael)
2009-09-05 19:17:59 +02:00
ca8a194c56
Bugfix: Correctly grab the right mouse button for resizing windows (Thanks xeen)
2009-09-05 17:32:26 +02:00
a8352a8988
Merge patches for OpenBSD compatibility
2009-09-02 22:25:50 +02:00
ae2371ee58
Implement long options (--version, --no-autostart, --help, --config)
2009-09-02 22:14:09 +02:00
67dcd9df28
Bugfix: In stacked/tabbed mode we need the regular border color (Thanks badboy)
2009-09-02 21:59:31 +02:00
100cc6b717
Bugfix: If the pointer is outside of the screen when starting, fall back to the first screen (Thanks mxf)
2009-08-31 20:27:44 +02:00
2b49c6086d
Bugfix: Don’t display unnamed workspaces with %d: (Thanks Mirko)
2009-08-29 11:06:34 +02:00
d333b8534d
Bugfix: Draw black border instead of background-color around clients with {width,height}_increment (Thanks xeen)
2009-08-29 11:03:14 +02:00
39457338e4
Bugfix: Don’t crash if the numlock symbol cannot be found (Thanks xeen)
2009-08-27 21:34:07 +02:00
39f002e0b1
Bugfix: Don’t call resize_client if the width/height increment properties did not change
...
This avoids an endless loop, preventing clients to go to fullscreen
2009-08-25 23:16:17 +02:00
55b1bf4582
Bugfix: Correctly use base_width/base_height and size increment hints, correctly send fake configure notify events
2009-08-23 21:49:38 +02:00
8c4e2e48f4
Don’t round up if the corrected height/width is the same as the old one
2009-08-23 20:30:17 +02:00
d9d4d9fff1
Implement tabbing
...
Use command "T" to switch to tabbing
2009-08-22 09:07:23 +02:00
c7ba95e79d
Implement resizing floating clients with Mod1 + right mouse button
2009-08-22 07:49:28 +02:00
012f618c85
Bugfix: Map window when it got the fullscreen hint set
2009-08-21 12:19:04 +02:00
0b7a27ea79
initialize last_keycode
2009-08-19 14:37:34 +02:00
4b3ea4d524
Bugfix: Don’t crash when clients set an invalid leader hint
2009-08-19 10:56:42 +02:00
44d9111d65
More log cleanups
2009-08-11 15:23:58 +02:00
556f180290
Bugfix: Fix screen wrapping, cleanup some log messages
...
Before this fix, you could go upwards and select the screen which
was at the rightmost because it also was the one topmost (if all
screen’s top position is equal).
2009-08-11 15:02:30 +02:00
dd134a74ef
Implement support for width_inc and height_inc of size hints
...
This fixes the problem where you saw old window contents when resizing
a window (due to opening new windows or similar), especially in terminals.
2009-08-11 14:08:04 +02:00
d8380c6101
Bugfix: Don’t initialize screen twice when not using Xinerama (Thanks badboy)
2009-08-11 12:38:52 +02:00
b9636ceeec
Set WM_STATE_WITHDRAWN when unmapping, unmap windows when destroying (Thanks xeen)
...
Seems like java apps need it. Also, you probably want to use XToolkit,
when you have to work with java apps:
export AWT_TOOLKIT=XToolkit
2009-08-11 12:16:10 +02:00
51df900312
Bugfix: Fix focused but inactive window color when using multiple monitors
2009-08-08 21:45:29 +02:00
ceb3670d65
Reduce number of configuration requests and thus flickering
...
This reduces flickering when opening new windows and especially moving
existing windows in tiling mode. Especially noticable on multi-monitor
setups.
2009-08-08 21:31:42 +02:00
f72576a290
Fix rendering of window decorations in stacking mode (there was a 1px-line too much)
2009-08-08 20:20:06 +02:00
47a798ac4a
Implement assignments of workspaces to screens, big cleanup of workspace code
...
Please test this! Plug in screens, unplug them, use your video projector,
change resolutions, etc.
To use the assignments, use the following syntax:
workspace <number> [screen <screen>] [name]
Where screen can be one of:
<number> (It is not provided that these numbers stay constant, so use with care)
<x>x<y> (Coordinates where the screen starts, so 1280 will be fine to match the
screen right of the main screen if your main screen is 1280 pixels
width. However, 1281 will not match)
<x>
x<y>
Some examples follow:
workspace 1 screen 0
workspace 1 screen 1
workspace 1 screen 1280x0
workspace 2 screen 1280
workspace 3 screen x0
workspace 3 screen 1 www
workspace 4 screen 0 mail
2009-08-08 19:51:51 +02:00
6192975a04
Bugfix: Don’t crash when the font is specified after the workspace names in configfile (Thanks xiaodong)
2009-08-07 15:48:13 +02:00
7cdaa1b277
Implement support for using key symbols in configuration file
...
Use "bindsym" instead of "bind". You have to use the names of keys
as in xmodmap. To get a list of currently bounud symbols, use
xmodmap -pke
Technical quirk: Xlib generated MappingNotify events upon
XkbMapNotify events (from XKB, as the name says). XCB does not yet
have support for XKB, thus we need to select and handle the event
by ourself. Hopefully, this will change in the future.
2009-08-07 15:35:12 +02:00
3bd724f08d
Bugfix: Track the user’s pointer over the root window and update current workspace (Thanks xeen)
...
When not having any windows on the first workspace, switching to the
second workspace using your mouse was not registered by i3.
2009-08-06 00:59:48 +02:00
20875494ee
Bugfix: Correctly unmap stack windows and don’t re-map them too early
2009-08-06 00:38:12 +02:00
35d811db82
Bugfix: Change to default mode if there was no client selected
...
Another bug fixed by having testcases :-)
2009-08-06 00:16:58 +02:00
5d14dca41d
Implement correct rendering of floating windows (decoration color)
2009-08-05 19:59:58 +02:00
78b9e7f5ce
Bugfix: dock clients need to have borderless = true
2009-08-05 19:28:21 +02:00
22e4f03553
Implement ws (with screen) to focus the next screen (wsl for example)
2009-08-05 19:24:21 +02:00
9222bea3b2
Implement borderless / 1-px-bordered windows
...
Use bn (normal), bp (1-px), bb (borderless) as commands to change the
border style of the currently focused window. Feel free to use i3-msg
to do this.
2009-08-05 18:33:44 +02:00
3114d6821d
Add support for WM_CLIENT_LEADER, put floating windows mapping to (0x0) to center of leader/workspace
2009-08-05 00:39:55 +02:00
af3972aa9f
Bugfix: Recognize clicks as client clicks (opposed to border_clicks) when clients send them for their parent window
...
See comment, happened for example with xfontsel. You normally got
to see the resize bar (when having >1 column, of course).
2009-08-04 22:47:42 +02:00
4c373c2128
Fix clicking on workspaces in internal bar (with named workspaces) (Thanks bapt)
2009-08-04 22:27:01 +02:00
19abb63393
s/Mod1/floating_modifier (Thanks badboy)
2009-08-02 22:58:23 +02:00
7cfe520755
Bugfix: Don’t hide assigned clients to inactive but visible workspaces (Thanks xeen)
2009-08-02 22:31:52 +02:00
a753684ac5
cache text_width for named workspaces, fix memory leak
2009-08-02 21:32:35 +02:00
e7bf93163d
Make path configurable
2009-07-28 22:09:53 +02:00
a43846ea27
Initial implementation of IPC via UNIX domain sockets
2009-07-28 20:51:29 +02:00
1befbb2a50
Use errx() instead of an own die() function
2009-07-28 14:03:50 +02:00
e6198ad6c8
Some little fixes for bapt’s patch, use predict_text_width, support UTF8, pre-render workspace names
2009-07-28 13:55:09 +02:00
ddcb11baba
Implements configurable named workspaces
2009-07-28 13:08:03 +02:00
33e536113d
Bugfix: Fix NULL-pointer dereferencing introduced by commit 874941 (Thanks tsdh)
2009-07-28 00:44:57 +02:00
76664df3df
Bugfix: Make assignments work again (Thanks badboy)
2009-07-26 02:12:45 +02:00
270922bf61
Bugfix: Don’t crash on floating windows, set focus correctly
2009-07-25 22:53:33 +02:00
1e095ece84
Merge branch 'next' of zekjur:/git/i3 into next
2009-07-25 22:31:01 +02:00
163c9ad7db
Map window/its decoration *after* calling render_layout()
...
Thus, no more flickering because the window was first mapped and then
moved. Especially users of multiple monitors should be happy now ;-).
Rather radical change, though, so be prepared for problems.
2009-07-25 22:29:28 +02:00
ed60b31fd0
Implement predict_text_width, which will be needed for named workspaces
2009-07-24 19:49:06 +02:00
ce501c9de9
Some fixes/reformatting for bapt’s patch
2009-07-23 20:36:48 +02:00
40750e227d
Implements a reload command
2009-07-23 18:46:21 +02:00
9db8535b4c
Some little fixes (mostly formatting) for bapt’s patch
2009-07-22 00:16:16 +02:00
3e262913e8
Implements next-previous workspace
2009-07-21 23:50:08 +02:00
ffcc8bbc3a
Implement putting clients into floating mode at a specific workspace
...
This changes syntax of the assign command a bit. Old configurations
will continue to work. See the userguide.
2009-07-21 16:43:20 +02:00
008a2665c1
Bugfix: Strip trailing whitespace when parsing assignments (Thanks bapt)
2009-07-21 16:05:43 +02:00
b893ec9987
Bugfix: Repeatedly try to find screens if none are available (Thanks mxf)
...
When rotating your screens (xrandr --output LVDS1 --rotate right), sometimes
the X server returned no screens which lead to an exit(1) of i3. Now, i3
tries to find screens for up to 5 seconds and only quits afterwards.
2009-07-21 15:59:11 +02:00
87494107b3
Bugfix: Correctly redecorate clients when changing focus (Thanks msi)
...
When moving your cursor from one tiling window to another tiling
window via a floating client, the old tiling window was not re-
decorated correctly
2009-07-21 15:49:08 +02:00
5b51c8c6f0
optimization: Render on pixmaps and copy the result on Stack_Wins
...
This should speed up the rendering of Stack_Wins with many window
decorations and it should considerably reduce flicker.
2009-07-17 18:32:40 +02:00
0434b6ea3d
Bugfix: That last push was one step too fast. Forgot to check parameter.
2009-06-29 22:23:24 +02:00
Michael Stapelberg