When `complete-run.pl` is given `--coverage-testing`, try to generate an
html coverage testing report for the run. This requires i3 to be
compiled with coverage testing support.
Introduce a config directive "show_marks [yes|no]" to en- or disable drawing marks on window decorations.
To not change the look & feel of existing configurations, the default is "no".
When a window receives a _NET_ACTIVE_WINDOW message, it can steal the focus. This may not be preferable to all users.
With this directive, the user can choose from one of the following:
1) 'smart' - focus the container if its workspace is visible, otherwise set the urgency flag (default)
2) 'urgent' - always set the urgency flag, do not steal focus
3) 'focus' - always switch focus, never set the urgency hint
4) 'none' - ignore the request entirely (do not switch focus, nor set the urgency hint)
fixes#1426
Handle changes to the property _NET_WM_STRUT_PARTIAL by reallocating
screen space in the dock area when the dock client requests a new
position.
This will allow changes to the bar config directive `position` to be
effective on the `reload` command.
fixes#1294
This introduces a "separator_symbol" property for the i3bar configuration.
If set, the specified string will be used as a separator instead of a vertical line. Since it is an optional configuration, complete backwards compatibility is given.
fixes#1472
This reverts commit cbd51ce664.
If you’ve started using this feature, I’m very sorry, but I think it’s
better to revert it entirely, as it will only cause more problems in the
future as more and more people upgrade and get bitten by this if we
didn’t revert it…
fixes#1536
Add the `--whole-window` switch for mouse bindings. This switch controls
what part of the container the pointer must be over to trigger a mouse
binding. The default is to only trigger mouse bindings over the
titlebars. With this switch, a mouse binding will be triggered over the
main part of the window as well.
This is a breaking change to the previous behavior, which would trigger
a mouse binding with a modifier over any part of the window.
fixes#1429
Send the affected workspace in the "current" property for each workspace
event for any type of workspace event that affects a particular
workspace.
fixes#1411
Rather than just toggling the fullscreen modes, allow to set them
directly with:
fullscreen enable|toggle [global]
fullscreen disable
For compatibility, retain the previous command and its toggling behavior:
fullscreen [global]
fixes#1120
Copy the binding struct before running it and use this copy to emit the
binding event.
This fixes a crash when the command `reload` is used in a binding when
the binding event is emitted.
The binding event will be triggered when a binding is run as a result of
some a user action. The binding event has the following properties:
change: (str) Currently this will only be "run" but may be expanded in
the future. Included for consistency with other events.
binding: (map) the serialized binding
The "binding" member will have these properties:
input_type: (str) either "keyboard" or "mouse"
input_code: (int) the xcb keycode of the keyboard binding if it was
provided or the mouse button if it is a mouse binding.
symbol: (str) the string representation of the input code
command: (str) the bound command
mods: (list of str) a list of the modifiers that were pressed as string
symbols
fixes#1210
Replace the XDummy script with Xephyr. This is done because of some
changes in the Xorg server that make XDummy difficult to use.
Rename library internal variables and function names to replace "xdummy"
with "xserver" to show this change (except for renaming the package and
lib file for better git history).
Rename the switch `--keep-xdummy-output` to `--keep-xserver-output`.
This switch should now be rarely used because Xephyr requires less set
up.
Replace "xdummy" with "xephyr" in comments and utility help
information. Update docs to show the new dependency.
fixes#1367
When a named workspace (i.e., a workspace that has a name that does not
begin with text that can be parsed as an integer greater than or equal
to zero) is represented by the ipc as a workspace json object such as
can be queried with `i3-msg -t get_workspaces`, set the num property to
-1 instead of json null.
This is for convenience of ipc consumers using type-constrained
languages such as C which have difficulty cleanly expressing nullable
integers.
fixes#1368
We're going to call parse_configuration() very early if -C is given on
the command line. Instead of the previous "only_check_config", which has
been a global variable, we now simply pass use_nagbar as false if we're
just validating.
This causes the whole parsing to run without X and of course without
starting nagbar and displaying the errors to standard out/error instead.
The return code of parse_configuration() is now a boolean which
represents whether an error occured during parsing and the programs exit
code is returned accordingly.
Although the config parser still has a lot of side-effects, we now can
parse without the need to have an XCB connection. A nicer implementation
would be to just set the new font and load it just after we're done
parsing, but to ensure we don't break functionality we just load a dummy
FONT_TYPE_NONE if XCB isn't available. The main reason for going this
route is that it's a bit difficult to test fonts in a distribution
agnostic way without bundling fonts with i3 (or Xdummy to be more
exact).
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Raise a window when cycling focus between floating windows with `focus
[direction]` command so that newly focused windows are rendered on top
of other windows.
This is done by placing the window last in the floating nodes of the
parent and reordering the stack so the relative order is preserved.
fixes#1322
http://tronche.com/gui/x/icccm/sec-4.html
> The WM_CLASS property (of type STRING without control characters)
> contains two consecutive null-terminated strings. These specify the
> Instance and Class names to be used by both the client and the window
> manager for looking up resources for the application or as identifying
> information.
i3 processes changes to WM_CLASS by updating the cached property and
running assignments. This allows the property to be used in criteria
selection.
fixes#1052
When a window becomes managed, explicitly set the current border width
to the default instead of relying on the default value of -1 to apply
the correct value.
Now that there are two different kinds of default borders, a border
width value of -1 is ambiguous. This can lead to different border widths
effectively being applied when the container changes from tiling to
floating, which is surprising behavior.
This commit extends behavior introduced in this commit to normal
borders:
7afe9cc78b
Explicitly set current border width when BS_PIXEL
fixes#1304
Users can specify a command to run when a button was pressed on i3bar to
override the default behavior. Currently only the mouse wheel buttons
are supported. This is useful for disabling the scroll wheel action or
running scripts that implement custom behavior for these buttons.
Example:
bar {
wheel_up_cmd nop
wheel_down_cmd exec ~/.i3/scripts/custom_wheel_down
}
fixes#1104
Fixes a bug where a normal floating default border is not applied when
the default tiling border is set to a pixel value.
This bug was introduced in this commit:
43b447855d
Consider motif border for floating geometry
Fixes a comment that claimed default floating border could override
motif hints, which was never the case.
fixes#1305
Test that the EWMH specified property _NET_DESKTOP_VIEWPORT is updated
properly on the root window. We interpret this as a list of x/y
coordinate pairs for the upper left corner of the respective outputs of
the workspaces.
This test is for this commit:
feature: implement ewmh desktop viewport property
4205973135
I have seen this message once or twice, but since the actual error
message was not included, I cannot definitely say what’s going on.
I think it might be a race condition where the file with the specified
tmpname() already exists, but let’s be sure before we attempt to fix it.
Test that the EWMH specified property _NET_DESKTOP_NAMES is updated
properly on the root window. We interpret this as a list of the open
workspace names.
This test is for this commit:
Implement EWMH desktop names
a9c094b731
When a window becomes managed, if the config specifies a pixel border
style, explicitly set the current border width so it does not change
when the container changes from tiling to floating.
fixes#1266
http://tronche.com/gui/x/icccm/sec-4.html#s-4.1.4
> IconicState - The client's top-level window is iconic (whatever that
> means for this window manager). The client can assume that its
> top-level window is not viewable, its icon_window (if any) will be
> viewable and, failing that, its icon_pixmap (if any) or its
> WM_ICON_NAME will be displayed.
For these requests, we just close the window.
fixes#1279
A window may become unmapped on manage when an assignment command unmaps
the window, such as moving it to the scratchpad or killing it.
This can cause i3 focus to be an unmapped window and different than X
focus which can lead to complications
fixes#1283
If a `workspace {N}` or `move to workspace {N}` command is given with N
as a plain number, the workspace of this number is selected for the
context of the command if one exists and there is no workspace with a
name that exactly matches N.
A container selected with criteria should be moved with the `move
[direction]` command, instead of this command always acting on the
focused container.
Since i3 honors the “Globally Active Input” focus model, we need to
explicitly state that we are not using that in our testcases :).
This requires X11::XCB from git to work (commit
71b25dcaafc509e710b8fd7de20c97ac3549fc39).
http://tronche.com/gui/x/icccm/sec-4.html#s-4.1.7
> Clients using the Globally Active model can only use a SetInputFocus request
> to acquire the input focus when they do not already have it on receipt of one
> of the following events:
> * ButtonPress
> * ButtonRelease
> * Passive-grabbed KeyPress
> * Passive-grabbed KeyRelease
Since managing a window happens on a MapNotify (which is absent from this
list), the window cannot accept input focus, so we should not try to focus
the window at all.
Fixes an issue with xfce4-notifyd which (correctly) declines focus when
we send WM_TAKE_FOCUS, which puts i3 in a state where i3 focus and X
focus are different when a notification appears.
_NET_ACTIVE_WINDOW:
> The window ID of the currently active window or None if no window has
> the focus.
This fixes a bug that would not update _NET_ACTIVE_WINDOW when focus
changed to an i3 container without a window such as a branch or
workspace content container.
This patch adds a new configuration option "mouse_warping [output|none]".
When mouse warping is disabled, mouse cursor does not jump to middle of current
screen when changing workspaces between multiple outputs. This introduces a
"special" cursor state, where focus is in one window and cursor on another.
Useful for eg. scrolling a web page with mouse wheel while typing into another
window on keyboard.
Workspace assignments with bare numbers assign all workspaces with that
number to the specified output.
Workspace assignment by number is overridden by workspace assignment by
name.
Test 517 was sometimes failing because the command to reset the test
generates a focus event which was not being properly ignored.
Now the correct event should always be tested.
Floating windows already had their own border style, but the width was
the same for all windows.
The configuration directives 'new_window' and 'new_float' can now be
used simultaneously to have different border widths for floating and
tiled windows.
fixes#1244
Implement the configuration option within the bar config directive for
custom workspace numbers with the directive `strip_workspace_numbers
yes`.
This directive strips the workspace name of the number prefix and
delimiter. When the workspace name consists only of the number, it will
default to show the number.
For example:
* "2:5" -> "5"
* "4:$" -> "$"
* "8" -> "8"
This allows customization of i3bar for alternate ordering of workspaces
which has a legitimate use for alternate keyboard layouts such as
Dvorak.
fixes#1131
Allow client requests of type _NET_ACTIVE_WINDOW to switch workspaces if
they indicate they are a pager. Otherwise, set the urgency hint on that
con to indicate that something happened.
This allows task switchers like skippy-xd to work properly.
http://standards.freedesktop.org/wm-spec/latest/ar01s03.html#idm140251368127856
http://standards.freedesktop.org/wm-spec/latest/ar01s03.html#idm140251368149456
The _NET_CLIENT_LIST property of the root window:
> These arrays contain all X Windows managed by the Window Manager.
Dock clients are not managed windows, so they should not be included in
_NET_CLIENT_LIST or _NET_CLIENT_LIST_STACKING.
The fullscreen_mode event is a window with the "change" property set to
"fullscreen_mode". This event should be emitted whenever a window enters
or exits fullscreen mode.
This event can be used to turn off dpms off when a window is fullscreen
or display the fullscreen container name in the status line for
instance.
When checking the window type for a resize command, first check to see
if the window property is null before checking whether or not it is a
dock window. The window may be null in the case it is a branch
container.
fixes#1220
If input focus is set by the window manager, it is not necessary to send
WM_TAKE_FOCUS because it has already taken focus.
http://tronche.com/gui/x/icccm/sec-4.html#s-4.1.7
> The goal is to support window managers that want to assign the input
> focus to a top-level window in such a way that the top-level window
> either can assign it to one of its subwindows or can decline the offer
> of the focus. For example, a clock or a text editor with no currently
> open frames might not want to take focus even though the window
> manager generally believes that clients should take the input focus
> after being deiconified or raised.
Both setting input focus and sending WM_TAKE_FOCUS is effectively
setting focus on the window twice which is certainly against the spirit
of the spec, if not the letter.
fixes#1167
Add and update the _NET_CLIENT_LIST property on the root window to
better comply with ewmh standards.
Information on this property can be found here:
http://standards.freedesktop.org/wm-spec/latest/ar01s03.html
> These arrays contain all X Windows managed by the Window Manager.
> _NET_CLIENT_LIST has initial mapping order, starting with the oldest window.
fixes#1099
BAIL_OUT produces a friendlier message explaining why the tests cannot
continue on the command line. `die` produces a cryptic message that some
test failed for some reason.
cmd_resize does not implement a method to resize dock clients.
A command like `[instance=".*"] resize grow width 160 px or 16 ppt`
when a dock client matched would crash i3.
fixes#1201
The suppression file makes valgrind output more readable by hiding
reports of memory leaks for GObject-related initialization functions in
Pango and Cairo.
This patch fixes ticket #1168 to extend the window IPC event mechanism
to send IPC events for window focus and title changes. The newly added
window events use the same format as the already established "new"
event.
Specifically this patch:
* Moves the ipc_send_window_event() function from src/manage.c into
src/ipc.c and adds an argument for the change property of the event
* Updates src/manage.c to use the new function signature. To ensure
that the "new" event does not send the same event data as the
"focus" event, setting focus now happens after the "new" event
has been sent
* Adds IPC focus event notification to src/x.c. To workaround a problem
during window close when accessing the window name, a function has been
added to query whether a window is actually attached to its parent. To
avoid obsolete focus notification, a new field has been added to keep
track of the focus without any interference by the click handling
* Adds IPC title event notification to src/handlers.c. To avoid
obsolete title notification, a function has been added to determine
whether a window title has actually changed
* Updates the IPC documentation to include the new events
* Updates testcases/t/205-ipc-windows.t to include the "focus" event
in order to ensure the correct event sequence
* Adds two new unit tests, b/testcases/t/219-ipc-window-focus.t and
b/testcases/t/220-ipc-window-title.t to ensure proper "focus" and
"title" events
To be honest, I’m not entirely sure where the race condition originates
from, but when making sure that there are no pending events
(which is what sync_with_i3 accomplishes) before warping the pointer, we
have less flaky testsuite runs.
closes#1189
This hopefully increases the reliability of the test. Empty containers
created by “open” sometimes get spurious UnmapNotify events, and in at
least one run, this test failed because of such an event.
Calls ewmh_update_current_desktop on startup to set the
_NET_CURRENT_DESKTOP property. Without this change the property only
gets set after the workspaces have been manipulated. Also exclude
hidden workspaces (i.e. those starting with "__" from the workspace
index.
Adds tests for startup and workspace switching.
Make sure the command `move <direction>` properly sends the workspace
focus ipc event required for i3bar to be properly updated and redrawn.
Make `ipc_send_workspace_focus_event publicly available from ipc.h for
more flexible event sending.
Change the behavior of movement into a branch with respect to the
position the moving con will be placed within the branch when the
movement is complete.
The correct position is determined by the direction of movement or the
position of the focused-inactive container within the branch.
If the direction of movement is the same as the orientation of the
branch container, append or prepend the container to the branch in the
obvious way. If the movement is to the right or downward, insert the
moving container in the first position (i.e., the leftmost or top
position resp.) If the movement is to the left or upward, insert the
moving container in the last position (i.e., the rightmost or bottom
position resp.)
If the direction of movement is different from the orientation of the
branch container, insert the container into the branch after the
focused-inactive container.
fixes#1060
Remove the line to warp the pointer to (0, 0) in `new-test` helper
script, which is used to create new tests.
Since 4.6-g0634766, testcases may assume at the start of the test that
the pointer begins at position (0, 0).
Tests may disturb the pointer in their normal operation that may lead to
unexpected results in later tests using that display. Reset the pointer
before a test begins to (0, 0) to save test developers from related
"gotchas" and reduce multi-monitor test boilerplate.
Split test 514's assertion into three assertions to make it more
explicit what is being tested, and why a run might fail.
Move critical test code out of the event handler to clarify flow and
allow a query of the actual current workspace to use in assertions.
Works around an issue which caused this test to fail spurriously because
of pointer-related quirks in the i3 test suite which would sometimes
cause i3 to open on workspace 2 (However, the test is now agnostic to
the initial workspace or output).
When 'move <direction>' is issued in the context of a container that
borders a workspace, and there is no suitable place within this
workspace for which this container can move, move the container to the
closest output in this direction instead.
When focusing/moving to outputs, the method of getting the correct
output for a given container fails if the container in question is
floating and only partially mapped on an output screen. This patch
introduces a fail-safe retrieval of the output for any container.
Adds two files to gitignore.
`.clang_complete` is created by the clang_complete vim plugin
[https://github.com/Rip-Rip/clang_complete]
`Xdummy.so` is created by compiling the Xdummy module.
When i3 begins to manage a window, if the window opens on a workspace
that is not visible, the urgency hint on the newly managed window will
be set.
fixes#1088
Test for the existence of the symlink to "latest" with the -l flag,
which tests if the target is a symbolic link. Testing with the -e flag
will fail in case the link points to a file that does not exist, which
will occur if the test result directories are deleted by hand.
i3 would accept an invalid resize command like 'resize shrink width 10
px or' without specifying the ppt value, and then crash. This patch
fixes the parser specification.
i3 current behavior hides the binding mode indicator when
workspace buttons are disabled.
This patch adds a new configuration for i3bar called
'binding_mode_indicator' which acts like the workspace_buttons.
It is now possible to configure i3bar to hide the
workspace buttons and keep showing the binding mode indicator.
This should make the hide workspace buttons configuration
more convenient for those who are heavily using binding
modes.
Default value for binding_mode_indicator is true.
If the currently focused window is in fullscreen mode, and a new window
is opened with WM_STATE_FULLSCREEN set, the new window now becomes the
new fullscreen window and gains focus.
Add debuglog command that takes toggle|on|off. Add get_debug_logging()
to be able to toggle. Make t/187-commands-parser.t expect 'debuglog'.
Document the debuglog command in userguide.
Add shmlog command that takes <size>|toggle|on|off. Separate logbuffer
management into open_logbuffer() and close_logbuffer(). Make
t/187-commands-parser.t expect 'shmlog'. Add update_shmlog_atom() to
update the SHMLOG_PATH. Document the shmlog command in userguide.
The hidden_state and mode of each i3bar instance can now be controlled from within i3.
Therefore, two new i3 command were introduced:
_
bar hidden_state show|hide|toggle [<bar_id>]
show: always show the bar
hide: normal hide mode
toggle: toggle between show and hide (individually for each bar)
_
bar mode dock|hide|invisible|toggle [<bar_id>]
hide,dock: like before
invisible: always keep the bar hidden
toggle: toggle between dock and hide (individually for each bar)
This patch introduces a hidden_state ("hidden_state hide|show") in the
barconfig, which indicates the current hidden_state of each i3bar
instance. It only affects the bar when in hide mode. Additionally, a new
invisible mode was introduced. In order to change the hidden_state or
mode of the bar from i3, a barconfig-update event was introduced, for
which a bar can subscribe and the bar then gets notified about the
currently set hidden_state and mode in its barconfig.
For convenience, an id field ("id <bar_id>") was added to the barconfig, where one can
set the desired id for the corresponding bar. If the id is not specified, i3 will
deterministically choose an id; otherwise, with the previous random approach for finding
a new id, which is actually not shared with i3bar, as it would determine its id on
startup, the event-subscription would be destroyed on reload. Still, this issue remains
when manually changing the bar_id in the config and then reloading.
fixes#833, #651
When moving a fullscreen window to scratchpad with 'move scratchpad', the
focused window would stay fullscreen.
Also, when having a container in fullscreen mode and then focusing a child of
this container and moving it to scratchpad, it would enable fullscreen for
the child window.
This patch fixes both problems, so the scratchpad window is always floating.
_NET_WM_STATE_DEMANDS_ATTENTION indicates that some action in or with
the window happened. It's a weaker hint than urgency flag of WM_HINTS,
but some applications and almost all Qt applications use it instead of
WM_HINTS' urgency flag (one example is Skype).
Added new event id (I3_IPC_EVENT_WINDOW) so that a an IPC client can
subscribe to events on windows. Added a basic window event that gets
triggered when a window gets successfully reparented. This new event
also dumps the container data, so that IPC clients can get the initial
window name. IPC clients wishing to see window events should subscribe
to 'window'.
This change ensures a scratchpad window is still centered on the screen
if it has first been shown on another screen of a different
resolution. Moving or resizing the scratchpad manually disables this
behavior.
fixes#809
This makes the moving behavior more consistent. If you want to focus the
workspace you are moving to, just chain the keybinding in your config
file:
bindsym $mod+Shift+1 move workspace 1; workspace 1
This patch splits the main .gitignore with a specific
testcases/.gitignore and also add 4 patterns to the ignore list:
i3-command-parser.stamp
i3-config-parser.stamp
testcases/-
testcases/i3-cfg-for-*
It looks like the code which was removed with this commit was not
necessary anyways since con_move_to_workspace() by now checks on its own
whether it moves to the scratchpad.
fixes#913
The corresponding command is 'rename workspace to <name>'. As a side-effect
this fixes the command 'rename workspace 1 to to'.
Signed-off-by: Michael Walle <michael@walle.cc>
Focusing child from a workspace should now skip over the floating con and
go directly to its child. Focusing parent from that grandchild should leave
the workspace focused again.
As the workspace might be reached via recursion (e.g. moving from the edge
of a fullscreen split container), it's necessary to check for a fullscreen
container whenever a workspace is reached.
If a window with _NET_STARTUP_ID set is moved to another workspace, it
will delete any associated startup sequence immediately. This will also
occur if a window has a leader with _NET_STARTUP_ID set, if the leader
has no container (never been mapped).
A startup sequence may also be deleted if it's matched by
startup_workspace_for_window() and its 30-second timeout has elapsed.
This avoids a case where a fullscreen container could be moved onto a
workspace that already had its own fullscreen container, leading to
two fullscreen containers on top of each other.
Fix a crash that occured when moving a window to the scratchpad that is
seemingly floating to the user, but actually a descendant of a floating
parent con (and itself non-floating). If that is the case, move the
floating parent container to scratchpad instead of the window.
fixes#740
Previously, when you had an urgent container in a stack on some
invisible workspace (say urxvt) and you switched to it, the urgency hint
was not properly cleared.
A good visualization of the new algorithm is this:
+--------+
| |
+--------+=| S1 |========================
| | | |
| S0 | +--------+
| | +--------+
+--------+=========| |================
| S2 | +--------+
| | | |
+--------+ | S3 |
| |
+--------+
When focus is on S0, 'focus output right' will first match S1 (the
closest output which overlaps in the highlighted area), then S2, but not
S3 (since S3 does not overlap into the highlighted area).
fixes#669fixes#771
If there is a client with an urgency hint on another workspace and
switching to this workspace would cause the urgency to be reset (by
moving the focusing to the client), delay the reset by some time. This
gives the user the chance to see it.
This commit adds the possibility to configure the urgency delay timer
duration using the 'force_display_urgency_hint' directive. Also,
documentation and a testcase was added to allow for automated checks of
the intended behavior.
fixes#482
this implements both the "move container to workspace back_and_forth" command
and movements to the same workspace when auto_back_and_forth is set.
it includes documentation and test suite additions by michael.
it also simplifies the workspace_show_by_name function (making use of
workspace_get accepting NULL pointers).
Before commit 4976fa3350, setting the
layout of workspaces to something else than the default would just mess
up the parent container of the workspace (the content container).
After that commit, it would create an unnecessary split container when
you change the layout _before_ opening any containers. To avoid this, we
now store the layout (similar to how the 'workspace_layout'
configuration directive works) and apply it when the first container is
attached to the workspace.
Fixes#796
The problem was that scratchpad_move() didn’t check whether the source
workspace was focused. Therefore, 'move scratchpad' only worked reliably
interactively , but not when used with criteria.
When the workspace layout (formerly orientation) was forced to change
due to a move command, the split container we created was not marked as
split = true, which caused tree_flatten() to errnously kill the contents
of it and thus one window ended up unmanaged.
Also, the logic in tree_flatten() was inverted due to commit de94f6da.
fixes#790
Previously, in case 'layout stacked' (for example) had been called
interactively, con_set_layout would be called with focused->parent,
while with for_window, it’d be called on the actual matching container.
This difference in behavior was the cause for the inability to use
'for_window [class="XTerm"] layout tabbed', which now works \o/, but
more on that below.
The change also allows us to handle the case of the user selecting a
CT_WORKSPACE container properly, that is, by using the special case and
creating a new split container on the workspace which gets all the
contents, but a new layout.
Now, before you are enthusiastic about the change and try to use
for_window magic in your config file, keep in mind: The 'layout' command
acts on the parent split container. That is, when using a line such as
this one:
for_window [class="XTerm"] layout tabbed
…and opening an XTerm when on a workspace with one single other window,
the whole workspace will be set tabbed (just as previously when you
opened an XTerm and sent 'layout tabbed' manually).
Therefore, to open XTerm in its own tabbed split container, you need to
split before:
for_window [class="XTerm"] split v, layout tabbed
The comma here is important! It says that the second command should not
be treated as an entirely unrelated command, but it should also relate
the matching window (while it does work with a ';', that is prone to
race-conditions and should be avoided).
fixes#358
When resizing floating windows, changing the height was not correctly
handled. This commit fixes that and adds testcases for shrinking and
growing the width and height of floating windows.
From the source:
When starting i3 initially (and after each change to the connected
outputs), this function fixes the resolution of the __i3
pseudo-output. When that resolution is not set to a function which
shares a common divisor with every active output’s resolution,
floating point calculation errors will lead to the scratchpad window
moving when shown repeatedly.
fixes#632
This is useful for third-party scripts which require certain features
and want to error out cleanly when they are run with an old i3 version.
Additionally, i3 --version might be different from what’s actually
running (an old version of the binary), so i3-msg -t get_version will be
the best way to figure out the i3 version you are actually running from
this commit on.
With this commit, the "default" layout is replaced by the splith and
splitv layouts. splith is equivalent to default with orientation
horizontal and splitv is equivalent to default with orientation
vertical.
The "split h" and "split v" commands continue to work as before, they
split the current container and you will end up in a split container
with layout splith (after "split h") or splitv (after "split v").
To change a splith container into a splitv container, use either "layout
splitv" or "layout toggle split". The latter command is used in the
default config as mod+l (previously "layout default"). In case you have
"layout default" in your config file, it is recommended to just replace
it by "layout toggle split", which will work as "layout default" did
before when pressing it once, but toggle between horizontal/vertical
when pressing it repeatedly.
The rationale behind this commit is that it’s cleaner to have all
parameters that influence how windows are rendered in the layout itself
rather than having a special parameter in combination with only one
layout. This enables us to change existing split containers in all cases
without breaking existing features (see ticket #464). Also, users should
feel more confident about whether they are actually splitting or just
changing an existing split container now.
As a nice side-effect, this commit brings back the "layout toggle"
feature we once had in i3 version 3 (see the userguide).
AFAIK, it is safe to use in-place restart to upgrade into versions
after this commit (switching to an older version will break your layout,
though).
Fixes#464
e.g. pressing Mod1+x when having the following in your configfile:
bindsym Mod1+x some invalid command
will lead to an i3-nagbar instance popping up, offering you to view the
error log (which will contain parser errors from this commit on).
In certain situations (when you have a h-split within a h-split) you
couldn’t properly resize previously. This commit makes the resize
command properly traverse up the containers.
fixes#754
While it’s generally intended that wait_for_window is not called within
this testcase, in the first test instruction it was a mistake. The
window in fact gets mapped and therefore we should call wait_for_window.
…by using the new syntax which will not trigger i3-nagbar. Checking for
i3-nagbar is inherently prone to race conditions since i3-nagbar does
not communicate in any way that it’s there.
…by getting the socket path from i3 and then checking that it conforms
to what we expect. Previously we monitored /tmp, which can go wrong in
various ways, especially since i3’s directory within /tmp is not
predictable (by design).
This is now restricted according to the already defined fullscreen
focus constraints. Test case 157 was removed, as we don't prevent
level up/down in fullscreen anymore. Those commands are properly
tested in fullscreen by test case 156.
Fixes: #612
Basically, a focus change can't escape a fullscreen container. The
only exception is per-output fullscreen containers, as you should
be able to focus a container in a different workspace in this case.
This is an improvement on 4eab046e, now considering the difference
between global and per-output fullscreen and taking the tree
structure into account to determine what escaping the fullscreen
container means. It only affects targeted focus commands in the
form "for_window [...] focus", but it lays the foundation for
forthcoming fixes to all other focus commands.
If the target is in a different workspace, there's no reason why
we wouldn't allow the user to focus it. We already allow this when
focusing a workspace, for example.
Initially I thought using the second precision time() function is good enough,
but to make t/113-urgent.t considerably faster (>2s vs. 0.08s), we put in a
little more effort and use gettimeofday. Otherwise, this test blocks the whole
testsuite from completing much faster on modern machines :).
This change has two implications:
1) tree_render() will now be called precisely once for input which consists of
multiple commands (like "focus left; focus right"). Also, the caller of
parse_command() has to call it. This makes us able to fix tickets such as
ticket #608 (where multiple tree_render() calls are noticable).
2) The output of a command is now a JSON array of return values of the
individual subcommands. In the case of "focus left; focus right", this is:
[{"success":true}, {"success":true}]
While this is incompatible with what i3 returned before, the return value of
commands was undocumented and therefore not subject to our API stability.
Deiz