* guix/build/vm.scm (format-partition): Add #:label parameter, and honor
it.
(initialize-hard-disk): Add #:file-system-label parameter, and pass it
to 'format-partition'.
* gnu/system/vm.scm (qemu-image): Add #:file-system-label parameter and
pass it to 'initialize-hard-disk'.
* guix/store.scm (open-connection): Remove misleading 'setsockopt' call,
erroneously introduced in df1fab58. This would actually shrink the
receive buffer from 124 KiB to 12 KiB, though it had little impact on
performance.
* gnu/system.scm (operating-system-activation-script): New procedure,
containing most of the former 'operating-system-boot-script'.
(operating-system-boot-script): Call it, and 'primitive-load' its
result.
* guix/build/activation.scm (%booted-system): Remove.
(activate-current-system): Remove #:boot? parameter and related code.
* guix/build/vm.scm (load-in-linux-vm): When MAKE-DISK-IMAGE?, use
'-drive ...,if=virtio' for better performance.
* gnu/system/vm.scm (qemu-image): Use /dev/vda instead of /dev/sda.
* guix/build/install.scm (install-grub): Call 'error' if 'system*'
returns non-zero.
* guix/build/vm.scm (initialize-partition-table): Make 'partition-size'
a positional parameter. Call 'error' when 'system*' returns
non-zero'.
(format-partition, initialize-root-partition): New procedures.
(initialize-hard-disk): Use them.
This allows progress reports emitted by 'substitute-binary' to be
correctly displayed.
* guix/store.scm (%newlines): New variable.
(process-stderr) <%stderr-next>: Flush (current-build-output-port)
when S contains one of %NEWLINES.
* guix/build/linux-initrd.scm (boot-system): Add pre-unwind handler in
'catch' form around 'primitive-load', and call 'format' and
'display-backtrace' from there.
* guix/ui.scm (show-what-to-build)[built-or-substitutable?]: New
procedure. Check whether OUT is #f.
Use it.
* tests/ui.scm ("show-what-to-build, zero outputs"): New test.
* gnu/system.scm (etc-directory): Change default value of #:profile.
Change contents of SHELLS. Use /run/current-system/profile/{s,}bin in
BASHRC.
(operating-system-boot-script)[%modules]: Add (guix build
linux-initrd). Add call to 'activate-current-system' in gexp.
(operating-system-initrd-file, operating-system-grub.cfg): New
procedures.
(operating-system-derivation): Don't build grub.cfg here and remove it
from the file union.
* gnu/system/vm.scm (qemu-image): Remove #:populate.
(operating-system-build-gid, operating-system-default-contents):
Remove.
(system-qemu-image): Remove call to
'operating-system-default-contents'. Use 'operating-system-grub.cfg'
to get grub.cfg. Add GRUB.CFG to #:inputs.
(system-qemu-image/shared-store): Likewise, but don't add GRUB.CFG to
#:inputs.
(system-qemu-image/shared-store-script): Pass --system kernel option.
* guix/build/activation.scm (%booted-system, %current-system): New
variables.
(boot-time-system, activate-current-system): New procedures.
* guix/build/install.scm (evaluate-populate-directive): Add case
for ('directory name uid gid mode).
(directives, populate-root-file-system): New procedures.
* guix/build/vm.scm (initialize-hard-disk): Replace calls to
'evaluate-populate-directive' by a call to
'populate-root-file-system'.
* gnu/services/dmd.scm (dmd-configuration-file): Use
/run/current-system/profile/bin.
* gnu/services/xorg.scm (slim-service): Likewise.
* gnu/system/vm.scm (qemu-image): Rename #:inputs-to-copy to #:inputs,
and #:initialize-store? to #:register-closures?. Add #:copy-inputs?.
Adjust build gexp accordingly.
(system-qemu-image): Remove #:initialize-store? argument and add
#:copy-inputs?.
(system-qemu-image/shared-store): Add #:inputs, #:register-closures?,
and #:copy-inputs? arguments.
* guix/build/vm.scm (register-closure): New procedure.
(MS_BIND): New variable.
(initialize-hard-disk): Rename #:initialize-store? to
#:register-closures?, #:closures-to-copy to #:closures, and add
#:copy-closures?.
Add 'target-directory' and 'target-store' variables.
Call 'populate-store' only when COPY-CLOSURES?.
Bind-mount the store to TARGET-STORE when REGISTER-CLOSURES? and not
COPY-CLOSURES?. Add call to 'register-closure'.
* guix/build/linux-initrd.scm (pidof): New procedure.
(mount-root-file-system)[mark-as-not-killable]: New procedure.
Use it for unionfs when VOLATILE-ROOT?.
* gnu/services/base.scm (%do-not-kill-file): New variable.
(user-processes-service)[stop]: Honor it.
* gnu/services/base.scm (file-system-service): New procedure.
(user-processes-service): Add 'requirements' parameter.
* gnu/services/dmd.scm (dmd-configuration-file): Use (guix build
linux-initrd).
* guix/build/linux-initrd.scm (guix): Export 'check-file-system'.
* gnu/system.scm (file-union): New procedure.
(essential-services): Use it. Add that to the returned list.
* guix/build/linux-initrd.scm (switch-root): Delete file from the old
root. Chdir to / after 'chroot' call. Re-open file descriptors 0, 1,
and 2.
(boot-system): Move 'loading' message after the 'switch-root' call.
* gnu/system.scm (operating-system-boot-script): Add loop that closes
file descriptor before calling 'execl'.
* guix/build/linux-initrd.scm (move-essential-file-systems,
switch-root): New procedures.
(MS_MOVE): New variable.
(boot-system): Remove 'mount-essential-file-systems' call for ROOT.
Use 'switch-root' instead of chdir + chroot.
* gnu/system.scm (operating-system-derivation)[boot-file-systems]: Keep "/".
* gnu/system/linux-initrd.scm (file-system->spec): Keep the 'check?'
flag.
(qemu-initrd)[helper-packages]: New variable. Pass it as #:to-copy.
<gexp>: Add 'set-path-environment-variable' call. Remove #:unionfs
argument for 'boot-system'.
* gnu/system/vm.scm (%linux-vm-file-systems): Add 'check?' field/
(virtualized-operating-system): Likewise for the "9p" file system.
* guix/build/linux-initrd.scm (mount-root-file-system): Change #:unionfs
default. Call 'check-file-system' before mounting ROOT, when
VOLATILE-ROOT? is false.
(check-file-system): New procedure.
(mount-file-system): Honor 'check?' element in list; add
'check-file-system' call.
(boot-system): Remove #:root-fs-type and #:unionfs parameters.
[root-mount-point?, root-fs-type]: New variables.
Call 'mount-file-system' on all MOUNTS but "/".
* guix/ftp-client.scm (%ftp-login): Add #\return before #\newline.
Fixes access to some FTP servers, such as
ftp://invisible-island.net ("ProFTPD 1.3.4a Server").
* gnu/system.scm (<operating-system>)[initrd]: Default to
'qemu-initrd'.
(<file-system>): New record type.
(operating-system-root-file-system): New procedure.
(operating-system-derivation): Take the device name for GRUB from
'operating-system-root-file-system'. Pass the
'operating-system-initrd' procedure the list of boot file systems.
* gnu/system/linux-initrd.scm (file-system->spec): New procedure.
(qemu-initrd): Add 'file-systems' parameter, and remove #:mounts
parameter.
[file-system-type-predicate]: New procedure.
[linux-modules]: Use it.
Adjust #:mounts argument in 'boot-system' call.
(gnu-system-initrd): Remove.
* gnu/system/vm.scm (%linux-vm-file-systems): New variable.
(expression->derivation-in-linux-vm): Adjust call to 'qemu-initrd'.
(virtualized-operating-system): New procedure.
(system-qemu-image/shared-store-script)[initrd]: Remove. Use
'virtualized-operating-system'. Get the 'initrd' file from OS-DRV.
* guix/build/linux-initrd.scm (mount-qemu-smb-share, mount-qemu-9p):
Remove.
(MS_RDONLY, MS_BIND): New global variables.
(bind-mount): Remove local 'MS_BIND' definition.
(mount-root-file-system): New procedure, with code formerly in
'boot-system'.
(mount-file-system): New procedure.
(boot-system): Add #:root-fs-type parameter. Remove 'MS_RDONLY' local
variable. Use 'mount-root-file-system' and 'mount-file-system'.
* doc/guix.texi (Using the Configuration System): Add 'file-system'
declaration.
* guix/gexp.scm (gexp->derivation, gexp->script): Use 'default-guile'
instead of an explicit reference to 'guile-final'.
(default-guile): New procedure.
* guix/monads.scm (run-with-store)[default-guile]: New procedure.
Use it.
* gnu/system.scm (<operating-system>)[pam-services, setuid-programs]:
New fields.
(etc-directory)[bashrc]: Prepend /run/setuid-programs to $PATH.
(operating-system-etc-directory): Honor
'operating-system-pam-services'.
(%setuid-programs): New variable.
(operating-system-boot-script): Add (guix build utils) to the set of
imported modules. Call 'activate-setuid-programs' in boot script.
* gnu/system/linux.scm (base-pam-services): New procedure.
* guix/build/activation.scm (%setuid-directory): New variable.
(activate-setuid-programs): New procedure.
* build-aux/hydra/demo-os.scm: Add 'pam-services' field.
* guix/derivations.scm (derivation->string): New procedure.
(derivation-hash, derivation): Use it.
Memoization here yields a 5% improvement on "guix build -e '(@ (gnu
packages emacs) emacs)' -n --no-substitutes".
* guix/monads.scm: Unexport 'lower-inputs' and 'derivation-expression'.
(text-file*): Add comment about the switch to 'gexp->derivation'.
(lower-inputs): Add comment about its doom.
(derivation-expression): Likewise.
* guix/gexp.scm (lower-inputs*): Rename to...
(lower-inputs): ... this. Update callers.
* tests/monads.scm (derivation-expression): New procedure.
* doc/guix.texi (The Store Monad): Use 'gexp->derivation' instead of
'derivation-expression'. Remove documentation of
'derivation-expression'.
* guix/ui.scm (read/eval): Use THE-ROOT-MODULE so that macros are
properly expanded.
* tests/guix-build.sh: Use 'gexp->derivation' instead of
'derivation-expression'.monads: Hide 'derivation-expression' and 'lower-inputs'.
* guix/gexp.scm: New file.
* tests/gexp.scm: New file.
* Makefile.am (MODULES): Add guix/gexp.scm.
(SCM_TESTS): Add tests/gexp.scm.
* doc/guix.texi (Derivations): Add #:inputs in 'derivation' example.
Mark 'build-expression->derivation' as deprecated, refer to
"G-Expressions". Remove paragraph about code strata.
(G-Expressions): New node.
definitions accordingly.
* guix/build/cmake-build-system.scm (configure): Add flags.
* gnu/packages/maths.scm (lapack): Drop special code.
* gnu/packages/ssh.scm (libssh): Drop special code.
* gnu/packages/slim.scm (slim): Drop special code and enable shared library.
Co-authored-by: Eric Bavier <bavier@member.fsf.org>
* guix/pk-crypto.scm (string->canonical-sexp, sign, generate-key): Pass
the procedure name as the first argument to 'throw'.
(gcrypt-error-printer): New procedure.
<top level>: Add call to 'set-exception-printer!'.
* guix/nar.scm (restore-one-item): Add 'proc' parameter to 'catch'
handler for 'gcry-error.
* guix/scripts/archive.scm (%options, generate-key-pair, authorize-key):
Likewise.
* guix/scripts/substitute-binary.scm (narinfo-signature->canonical-sexp):
Likewise.
Fixes <http://bugs.gnu.org/17312>.
* guix/scripts/authenticate.scm (guix-authenticate): Add calls to
'set-port-encoding!' and 'set-port-conversion-strategy!'. Wrap body
in 'with-fluids' form that sets '%default-port-encoding' and
'%default-port-conversion-strategy'.
* tests/guix-authenticate.sh: Add test.
* tests/pk-crypto.scm ("hash corrupt due to restrictive locale
encoding"): Add reference to bug.
* guix/pk-crypto.scm (string->canonical-sexp): Pass "ISO-8859-1" as the
2nd argument to 'string->pointer'.
* tests/pk-crypto.scm ("version"): New test.
("hash corrupt due to restrictive locale encoding"): New test.
* guix/build/linux-initrd.scm (make-essential-device-nodes): Make
/dev/fuse.
(boot-system): Add #:unionfs parameter. Invoke UNIONFS instead of
copying files over when VOLATILE-ROOT? is true.
* gnu/system/linux-initrd.scm (expression->initrd): Add #:inputs
parameter.
[files-to-copy]: New procedure.
[builder]: Add 'to-copy' parameter; honor it.
(qemu-initrd)[linux-modules]: Add 'fuse.ko' when VOLATILE-ROOT?.
Pass UNIONFS-FUSE/STATIC as #:inputs; change builder to pass #:unionfs
to 'boot-system'.
Fixes situations where the remote 'guix build' is invoked before the
.drv has been completely copied, as reported at
<https://lists.gnu.org/archive/html/guix-devel/2014-04/msg00174.html>.
In some cases 'send-files' would return before the other end is done
importing the files, and so the subsequent 'guix build' invocation would
just miss the .drv file it refers to.
* guix/utils.scm (call-with-decompressed-port): Don't close PORT.
(call-with-compressed-output-port): Likewise.
* tests/utils.scm ("compressed-output-port + decompressed-port"): Adjust
accordingly.
* guix/scripts/offload.scm (send-files): Add explicit (close-pipe pipe)
call.
(retrieve-files): Likewise.
Prevents garbage collection of the temporary store directory while
restoring a file set, as it could previously happen:
<https://lists.gnu.org/archive/html/guix-devel/2014-04/msg00167.html>.
* guix/nar.scm (temporary-store-directory): Rename to...
(temporary-store-file): ... this. Use 'add-permanent-root' instead of
'add-indirect-root'.
(with-temporary-store-file): New macro.
(restore-one-item): New procedure, with code formerly in
'restore-file-set'. Use 'with-temporary-store-file'.
(restore-file-set): Use it.
* guix/scripts/offload.scm (remove-gc-root): Rename to...
(remove-gc-roots): ... this.
[builder]: Use 'scandir' and remove all the files starting with
%GC-ROOT-FILE.
(transfer-and-offload): Adjust to renaming; remove
'false-if-exception' wraps.
Partially fixes <http://bugs.gnu.org/17212>.
* guix/utils.scm (errno): Move definition of 'bv' outside of the
procedure. Use 'bytevector-s32-native-ref' or
'bytevector-s64-native-ref' instead of 'bytevector-sint-ref'.
Problem reported by John Darrington <john@darrington.wattle.id.au>.
* guix/nar.scm (write-file): Filter out "." and ".." from the result of
'scandir'. Previously we did this by passing a suitable predicate.
* build-aux/hydra/demo-os.scm: New file.
* Makefile.am (EXTRA_DIST): Add it.
* build-aux/hydra/gnu-system.scm (qemu-jobs): New procedure.
(hydra-jobs): Use it.
* guix/scripts/system.scm (read-operating-system): Export.
Fixes the creation of single-package profiles, reported by Ludovic Courtès.
* guix/build/union.scm (union-build): Add new internal procedure
'union-of-directories' that always creates a directory, containing the code
previously used only to merge multiple directories. Call it from the
multiple-directory case in 'union' and from the top-level 'union-build'.
* guix/pki.scm (write-acl): New procedure.
(ensure-acl): Use it. Fixes a regression introduced in 39831f1,
whereby 'ensure-acl' would yield a wrong-type-arg error.
* guix/scripts/archive.scm (authorize-key): Use 'write-acl'.
Before that, there was a small time window during which the GC could
wipe the .drv (before 'guix build' has been called), or the build
result (before 'retrieve-files' has started.)
* guix/scripts/offload.scm (remote-pipe): Add #:quote? parameter and
honor it.
(%gc-root-file): New variable.
(register-gc-root, remove-gc-root): New procedures.
(offload): Adjust comment. Run 'guix build' with '-r %GC-ROOT-FILE'.
(transfer-and-offload): Call 'register-gc-root' before
sending (derivation-file-name DRV). Call 'remove-gc-root' after the
call to 'offload' or 'retrieve-files'.
(send-files): Call 'remote-pipe' with #:quote? #f.
(retrieve-files): Likewise.
* guix/build/union.scm: Rewrite; only 'file=?' remains unchanged. Remove
'tree-union' and 'delete-duplicate-leaves' exports. Merge inputs in a
breadth-first fashion. Follow symlinks for purposes of making decisions
about the merge.
* tests/union.scm: Remove tests of 'tree-union' and 'delete-duplicate-leaves'.
* guix/scripts/package.scm (search-path-environment-variables)[manifest-entry->package]:
Use 'find-best-packages-by-name' instead of 'find-packages-by-name'.
On a profile with 140 packages, this reduces execution time of this
procedure from 5.8 seconds to 2.9 seconds (50% improvement.)
* guix/scripts/package.scm (maybe-register-gc-root): New procedure.
* tests/guix-package.sh (profile): Grep the output of "guix gc
--list-live" in a couple of places.
* guix/pki.scm (acl-entry-sexp, acl-sexp): Remove.
(public-keys->acl, current-acl): Return a native sexp.
(acl->public-keys, authorized-key?): Expect ACL to be a native sexp.
* guix/scripts/archive.scm (authorize-key): Convert ACL to
canonical-sexp when writing it.
* guix/scripts/substitute-binary.scm (guix-substitute-binary) <--query>:
Cache the result of (current-acl); pass it to 'valid-narinfo?' calls.
This saves 12% wall-clock time for "guix build emacs -n".
* guix/nar.scm (restore-file-set)[assert-valid-signature]: Rewrite in
terms of 'signature-case'.
* guix/scripts/substitute-binary.scm (narinfo-signature->canonical-sexp):
Call 'leave' instead of 'raise' when SIGNATURE is invalid.
(&nar-signature-error, &nar-invalid-hash-error): Remove.
(assert-valid-signature): Add 'narinfo' parameter; remove 'port'.
Rewrite in terms of 'signature-case' and 'leave'. Mention NARINFO's
URI in error messages. Adjust caller.
(narinfo-sha256): New procedure.
(assert-valid-narinfo): Use it.
(valid-narinfo?): Rewrite using 'narinfo-sha256' and
'signature-case'.
* tests/substitute-binary.scm (assert-valid-signature,
test-error-condition): Remove.
("corrupt signature data", "unauthorized public key", "invalid
signature"): Remove.
* guix/scripts/substitute-binary.scm (narinfo-signature->canonical-sexp):
Catch 'gcry-error' around 'string->canonical-sexp' call, and re-raise
as a SRFI-35 &message and &nar-signature-error.
(narinfo-maker): Handle when SIGNATURE is #f or an invalid canonical
sexp.
(&nar-signature-error, &nar-invalid-hash-error): New variables.
(assert-valid-signature): Use them. Expect 'signature' to be a
canonical sexp.
(read-narinfo): Remove authentication and authorization checks.
(%signature-line-rx): New variable.
(assert-valid-narinfo, valid-narinfo?): New procedures.
(guix-substitute-binary): Wrap body in 'with-error-handling'.
[valid?]: New procedure.
<--query>: Show only store items of narinfos that match
'valid-narinfo?'.
<--substitute>: Call 'assert-valid-narinfo'.
* tests/substitute-binary.scm (test-error*): Use 'test-equal'.
(%keypair): Remove.
(%public-key, %private-key): Load from signing-key.{pub,sec}.
(signature-body): Add #:public-key parameter.
(call-with-narinfo): New procedure.
(with-narinfo): New macro.
("corrupt signature data", "unauthorized public key", "invalid
signature"): Make the first argument to 'assert-valid-signature' a
canonical sexp.
("invalid hash", "valid read-narinfo", "valid write-narinfo"):
Remove.
("query narinfo with invalid hash", "query narinfo signed with
authorized key", "query narinfo signed with unauthorized key",
"substitute, invalid hash", "substitute, unauthorized key"): New
tests.
* guix/scripts/substitute-binary.scm (<narinfo>)[uri-base]: New field.
(narinfo-maker): Pass CACHE-URL as the 'uri-base' value.
(string->narinfo): Add 'cache-uri' parameter.
(lookup-narinfo)[cache-entry]: Switch to version 1. Add 'cache-uri'
field. Adjust body accordingly.
(remove-expired-cached-narinfos): Switch to version 1 by default.
* guix/scripts/substitute-binary.scm (<narinfo>): Add the 'signature'
and 'contents' fields.
(narinfo-signature->canonical-sexp): New function.
(narinfo-maker): Add the 'signature' argument and use it.
(assert-valid-signature): New function.
(read-narinfo): Support the Signature field.
(write-narinfo): Use 'narinfo-contents'.
(%allow-unauthenticated-substitutes?): New variable.
* guix/base64.scm, tests/base64.scm, tests/substitute-binary.scm: New files.
* Makefile.am (SCM_TESTS): Add tests/base64.scm and
tests/substitute-binary.scm.
(MODULES): Add guix/base64.scm.
* test-env.in: Set 'GUIX_ALLOW_UNAUTHENTICATED_SUBSTITUTES'.
* guix/scripts/offload.scm (transfer-and-offload): Use 'upload' lock
instead of 'bandwidth' around 'send-files' calls, and 'download' lock
around 'retrieve-files' call.
* guix/scripts/offload.scm (remote-pipe): Remove '-z' lsh command line
argument. This makes transfers almost an order of magnitude slower.
OpenSSH's ssh(1) man page notes: "Compression is desirable on modem lines
and other slow connections, but will only slow down things on fast
networks." See also
<http://www.spikelab.org/blog/transfer-largedata-scp-tarssh-tarnc-compared.html>.
* guix/build/download.scm (http-fetch)[post-2.0.7?]: Use
'string->number' and numeric comparison. This fixes version
comparison with "2.0.10" and subsequent 2.0 releases.
* guix/utils.scm (call-with-decompressed-port,
call-with-compressed-output-port): New procedures.
* tests/utils.scm ("compressed-output-port + decompressed-port"):
Rewrite to use them.
* guix/scripts/authenticate.scm (guix-authenticate): Add clauses
for ("rsautl" "-sign" "-inkey" key) and ("rsautl" "-verify" "-inkey" _
"-pubin").
* tests/guix-authenticate.sh (hash): Add test using -sign and -verify in
a pipeline.
* guix/scripts/authenticate.scm (read-canonical-sexp): Change to expect
a port instead of a file name.
(read-hash-data): Likewise.
(sign-with-key, validate-signature): New procedures.
(guix-authenticate): Rewrite in terms of these two procedures.
* guix/utils.scm (decompressed-port, compressed-port): New procedures.
* guix/scripts/substitute-binary.scm (decompressed-port): Remove.
(guix-substitute-binary): Pass a symbol or #f as the first argument to
'decompress-port'.
* tests/utils.scm ("compressed-port, decompressed-port, non-file"): New
test.
* guix/utils.scm (filtered-port): Make sure the 'execl' child process
always exits, and does (primitive-_exit 1) upon execution failure.
Use 'primitive-_exit' in the 'dump-port' child process.
* tests/utils.scm ("filtered-port, does not exist"): New test.
* guix/pk-crypto.scm (gcrypt-version): New procedure.
* guix/scripts/archive.scm (%key-generation-parameters): New variable.
(%options) <generate-key>: Use it.
* tests/pk-crypto.scm ("sign + verify, Ed25519"): Skip if using gcrypt < 1.6.0.
* guix/scripts/offload.scm (with-error-to-port): New macro.
(remote-pipe): Add #:error-port parameter. Use 'with-error-to-port'
around 'open-pipe*' call.
(build-log-port): New procedure.
(offload): Change #:log-port to default to (build-log-port). Call
'remote-pipe' with #:error-port LOG-PORT.
* guix/scripts/substitute-binary.scm (fetch): Add #:quiet-404?
parameter. Upon &http-get-error, re-raise C if the QUIET-404? is
true and the code is 404.
(fetch-narinfo): Pass #:quiet-404? #t.
* guix/pk-crypto.scm (bytevector->hash-data): Add #:key-type parameter.
Use the 'pkcs1' flag when KEY-TYPE is 'rsa', and 'rfc6979' when
KEY-TYPE is 'ecc' or 'dsa'.
(key-type): New procedure.
* guix/scripts/authenticate.scm (read-hash-data): Add 'key-type'
parameter. Pass it to 'bytevector->hash-data'. Adjust caller
accordingly.
* tests/pk-crypto.scm (%ecc-key-pair): New variable.
("key-type"): New test.
("sign + verify"): Pass #:key-type to 'bytevector->hash-data'.
("sign + verify, Ed25519"): New test.
* gnu/packages/gcc.scm (gcc-4.7): Change /nix/store in comment.
* gnu/system/vm.scm (operating-system-default-contents):
Use (%store-prefix) instead of "/nix/store".
* guix/derivations.scm (derivation-path->output-path,
derivation-path->output-paths): Change to /gnu/store in docstring.
* gnu/packages/ld-wrapper.scm (%store-directory): Change the default to
/gnu/store.
* guix/build/utils.scm (%store-directory): New procedure.
(remove-store-references): Use it for the default value of 'store'.
* guix/packages.scm (patch-and-repack)[builder]: Change default store to
/gnu/store.
* guix/scripts/offload.scm (offload): Remove default value for
'build-timeout'. Pass '--timeout' to the remote 'guix build'
process.
(transfer-and-offload, process-request): Remove default value for
'build-timeout'.
* guix/scripts/offload.scm (transfer-and-offload): New procedure, with
core formerly in 'process-request'.
(choose-build-machine): Remove 'requirements' parameter.
(process-request): Reply 'decline' when none of MACHINES matches the
requirements, and 'postpone' when MACHINES are busy.
* guix/scripts/offload.scm (machine-choice-lock-file,
machine-slot-file, acquire-build-slot, release-build-slot): New
procedures.
(choose-build-machine): Operate with (machine-choice-lock-file)
taken. Acquire a build slot for each of MACHINES. Release those not
used.
* guix/scripts/offload.scm (lock-machine, unlock-machine): Remove.
(lock-file, unlock-file): New procedures.
(with-file-lock): New macro.
(with-machine-lock): Rewrite in terms of 'with-file-lock'.
* guix/scripts/offload.scm (machine-lock-file, lock-machine,
unlock-machine): New procedures.
(with-machine-lock): New macro.
(process-request): Wrap 'send-files' and 'retrieve-files' calls in
'with-machine-lock'.
* guix/http-client.scm (&http-get-error): New condition type.
(http-fetch): Raise it instead of using 'error'.
* guix/scripts/substitute-binary.scm (fetch) <http>: Wrap body into
'guard' form; gracefully handle 'http-get-error?' conditions.
* guix/scripts/offload.scm (machine-load, machine-less-loaded?,
machine-less-loaded-or-faster?): New procedures.
(choose-build-machine): Use 'machine-less-loaded-or-faster?' when
sorting. Return the head of MACHINES unless it's loaded is >= 2.
* guix/packages.scm (patch-and-repack)[numeric-extension?, tarxz-name]:
New procedures.
[builder]: Adjust to deal with SOURCE when it's a directory.
<body>: Use 'tarxz-name'. Always add (guix build utils) to
IMPORTED-MODULES.
* guix/build/gnu-build-system.scm (unpack): Check if SOURCE is a
directory, and copy it locally if it is.
* gnu/packages/libwebsockets.scm (libwebsockets)[arguments]: Remove
'unpack' phase.
* guix/nar.scm (write-file) <directory>: Pass 'string<?' as the second
argument to 'scandir'.
* tests/nar.scm ("write-file puts file in C locale collation order"):
New test.
* guix/derivations.scm (<derivation-output>): Add 'recursive?' field.
Adjust 'make-derivation-output' callers.
(%read-derivation) <fixed-output>: When HASH-ALGO starts with 'r:',
set the 'recursive?' field and drop 'r:' from the hash algo name.
(write-derivation)[write-output]: Write the algo as 'r:HASH-ALGO' when
the RECURSIVE? field is set.
(derivation-hash) <fixed-output>: Prepend "r:" when RECURSIVE? is set.
(fixed-output-path): New procedure.
(derivation): Add #:recursive? parameter. Use 'fixed-output-path' to
compute the output file name of a fixed output derivation.
(build-expression->derivation): Add #:recursive? parameter. Pass it
to 'derivation'.
* tests/derivations.scm ("fixed-output derivation, recursive",
"build-expression->derivation produces recursive fixed-output",
"build-expression->derivation uses recursive fixed-output"): New
tests.
* doc/guix.texi (Derivations): Document #:recursive? for 'derivation'.
Add #:recursive? for 'build-expression->derivation'.
* guix/scripts/hash.scm (show-help): Add --recursive.
(%options): Likewise.
(guix-hash)[file-hash]: New procedure. Honor --recursive.
Use it.
* guix/nar.scm (write-file): Add missing field to the &nar-error
condition raised upon unsupported file type; change its message to be
more descriptive.
* tests/guix-hash.sh: Add tests with -r.
* doc/guix.texi (Invoking guix hash): Document --recursive.
* guix/scripts/system.scm: New file.
* Makefile.am (MODULES): Add it.
* po/POTFILES.in: Likewise.
* doc/guix.texi (Using the Configuration System): Link to "Invoking guix
system".
(Invoking guix system): New node.
* guix/build/union.scm (file=?): Return #f if FILE1 and FILE2 are not
regular files. Fixes a bug whereby collisions among directories would
lead to the invocation of 'file=?' and thus 'call-with-input-file' on
directories. Reported by Mark H. Weaver <mhw@netris.org>.
Fixes <http://bugs.gnu.org/16703>.
Reported by Raimon Grau <raimonster@gmail.com>.
* guix/build/download.scm (http-fetch)[headers]: New variable.
Pass it as #:headers or #:extra-headers to 'http-get' and
'http-get*'.
* guix/monads.scm (text-file*): New procedure.
* tests/monads.scm ("text-file*"): New test.
* doc/guix.texi (The Store Monad): Change example since the previous one
would erroneously fail to retain a reference to Coreutils. Document
'text-file*'.
* gnu/system/linux-initrd.scm (qemu-initrd)[virtio-9p-modules]: New
variable.
[linux-modules]: Append VIRTIO-9P-MODULES when a 9p file system is in
MOUNTS.
* guix/build/linux-initrd.scm (mount-qemu-9p): New procedure.
(boot-system): Recognize '9p' in MOUNTS, and use 'mount-qemu-9p'.
* guix/build/linux-initrd.scm (make-essential-device-nodes): Rename
devices with major = 8 to /dev/sda*. Make /dev/vda* devices.
* gnu/system/vm.scm (qemu-image): Change '/dev/vda' to '/dev/sda'.
* gnu/system.scm (operating-system-derivation): Likewise.
* guix/build/linux-initrd.scm (boot-system): New procedure.
* gnu/system/linux-initrd.scm (qemu-initrd): Add keyword parameters
'guile-modules-in-chroot?' and 'mounts'. Change builder to simply
call 'boot-system'.
(gnu-system-initrd): Change to a simple call to 'qemu-initrd'.
* gnu/system/vm.scm (expression->derivation-in-linux-vm): Call
'qemu-initrd' with #:guile-modules-in-chroot?.
* guix/scripts/offload.scm (offload): Add 'log-port' keyword parameter.
Handle log display here. Return the result of (close-pipe pipe).
(process-request): Adjust 'offload' call site accordingly. Call
'retrieve-files' only when 'offload' returns zero; exit when 'offload'
returns non-zero.
* guix/derivations.scm (derivation): Add #:local-build? parameter and
honor it.
(build-expression->derivation): Likewise.
* doc/guix.texi (Derivations): Update documentation of these
procedures.
* nix/nix-daemon/guix-daemon.cc (GUIX_OPT_NO_BUILD_HOOK): New macro.
(options): Add '--no-build-hook'.
(parse_opt): Handle it.
(main)[HAVE_DAEMON_OFFLOAD_HOOK]: Set 'useBuildHook' by default.
Set $NIX_BUILD_HOOK to our offload hook unless otherwise specified.
[!HAVE_DAEMON_OFFLOAD_HOOK]: Clear 'useBuildHook'.
* pre-inst-env.in: Set and export NIX_BUILD_HOOK.
* nix/scripts/offload.in, guix/scripts/offload.scm: New files.
* guix/ui.scm (show-guix-help)[internal?]: Add "offload".
* config-daemon.ac: Call 'GUIX_CHECK_UNBUFFERED_CBIP'.
Instantiate 'nix/scripts/offload'. Set 'BUILD_DAEMON_OFFLOAD'
conditional, and optionally define 'HAVE_DEAMON_OFFLOAD_HOOK' cpp
macro.
* daemon.am (nodist_pkglibexec_SCRIPTS)[BUILD_DAEMON_OFFLOAD]: Add it.
* Makefile.am (MODULES)[BUILD_DAEMON_OFFLOAD]: Add
'guix/scripts/offload.scm'.
(EXTRA_DIST)[!BUILD_DAEMON_OFFLOAD]: Likewise.
* m4/guix.m4 (GUIX_CHECK_UNBUFFERED_CBIP): New macro.
* doc/guix.texi (Setting Up the Daemon): Move most of the body to...
(Build Environment Setup): ... this. New subsection.
(Daemon Offload Setup): New subsection.
* guix/store.scm (topologically-sorted): New procedure.
* tests/store.scm ("topologically-sorted, one item",
"topologically-sorted, several items", "topologically-sorted, more
difficult"): New tests.
* guix/pki.scm (signature-subject, signature-signed-data,
valid-signature?): New procedures.
* guix/scripts/authenticate.scm (guix-authenticate): Adjust to use
them.
* nix-upstream: Update sub-module.
* daemon.am (libutil_a_SOURCES): Add affinity.cc.
(libutil_headers): Add affinity.hh.
(libexec_PROGRAMS, nix_setuid_helper_SOURCES,
nix_setuid_helper_CPPFLAGS, nix_setuid_helper_LDADD): Remove.
* doc/guix.texi (Setting Up the Daemon): Remove paragraph about
'nix-setuid-helper'.
* guix/scripts/substitute-binary.scm (guix-substitute-binary): Exit 0 when
%CACHE-URL has an HTTP scheme and looking up its host fails.
Always print a newline to stdout when starting.
* guix/pki.scm (ensure-acl): Make sure the directory of %ACL-FILE
exists.
* guix/scripts/archive.scm (generate-key-pair): Likewise for
%PUBLIC-KEY-FILE.
* guix/scripts/package.scm (leave-on-EPIPE): New macro.
(guix-package): Use it for 'list-installed', 'list-available', and
'--list-generations'.
* tests/guix-package.sh: Add test.
* guix/scripts/archive.scm (authorize-key): New procedure.
(guix-archive): Call it when OPTS contains 'authorize-key'.
* tests/guix-archive.sh: Add test with invalid public key.
* guix/pki.scm: Export '%acl-file'.
* doc/guix.texi (Invoking guix archive): Make it clear that '--import'
works only with authorized keys. Document '--authorize'.
* guix/scripts/authenticate.scm (signature-sexp): Remove.
(guix-authenticate): Upon '-verify', check whether the signature's
public key passes 'authorized-key?'.
* guix/pk-crypto.scm (token-string?): New procedure.
(canonical-sexp-nth-data): Return a symbol when the element is a
"token", and a bytevector otherwise.
(latin1-string->bytevector): Remove.
(hash-data->bytevector): Adjust accordingly.
* tests/pk-crypto.scm ("canonical-sexp-nth"): Adjust accordingly. Add
octet string example.
* guix/scripts/authenticate.scm (signature-sexp): New procedure.
(guix-authenticate): Use it to produce the signature. Adjust
verification code accordingly.
* tests/store.scm ("import corrupt path"): Adjust test accordingly.
* guix/pk-crypto.scm: Rename procedures, variables, etc. from
'gcry-sexp' to 'canonical-sexp'. Add comment with references.
* guix/scripts/authenticate.scm, tests/pk-crypto.scm: Adjust
accordingly.
* guix/scripts/package.scm (%options): Adapt option processors to accept and
return a second seed value: 'arg-handler', which handles bare arguments (if
not false). The install, remove, and upgrade option processors return an
arg-handler that repeat the same operation. All other option processors
return #f as the arg-handler. Make the arguments to install and remove
optional. The upgrade option processor deletes (upgrade . #f) from the
alist before adding a new entry.
(guix-package): Procedures passed to 'args-fold*' accept the new seed value
'arg-handler'. The 'operand-proc' uses 'arg-handler' (if not false).
* doc/guix.texi (Invoking guix package): Update docs.
* tests/guix-package.sh: Add test.
* guix/scripts/pull.scm (unpack)[builder](compile-file*): Remove.
(call-with-process, p-for-each): New procedures. Use them to compile
files in parallel.
Reported by Arne Babenhauserheide <arne.babenhauserheide@kit.edu>.
* guix/scripts/pull.scm (unpack)[builder](compile-file*): Change to run
'compile-file' in a child process. This limits memory usage; before
that memory usage was proportional to the number of files to compile.
* gnu/system/vm.scm (lower-inputs): Move to monads.scm.
(qemu-image): Don't add GRUB-CONFIGURATION to the INPUTS-TO-COPY.
(union, file-union, etc-directory): Move to gnu/system.scm.
(%demo-operating-system): New variable.
(system-qemu-image): Add 'os' parameter. Rewrite in terms of
'operating-system-derivation'.
* guix/monads.scm (lower-inputs): New procedure.
* gnu/system/grub.scm (grub-configuration-file): Change 'entries' to be
a plain list instead of a list of monadic values.
* gnu/system.scm: New file.
* gnu-system.am (GNU_SYSTEM_MODULES): Add it.
* guix/build-system/cmake.scm (cmake-build): Change 'out-of-source?' to
default to #t.
* guix/build/cmake-build-system.scm (configure): Add 'out-of-source?'
keyword parameter and honor it.
* guix/scripts/substitute-binary.scm (n-par-map*): New procedure.
(guix-substitute-binary): Use it instead of 'n-par-map'.
Reported by Nikita Karetnikov and Eric Bavier.
* guix/ui.scm (read/eval): New procedure.
(read/eval-package-expression): Use it.
* guix/scripts/build.scm (derivations-from-package-expressions): Rename to...
(derivation-from-expression): ... this. Accept procedures, under the
assumption that they are monadic thunk.
(show-help): Adjust accordingly.
(guix-build): Ditto.
* tests/guix-build.sh: Add test.
* doc/guix.texi (Invoking guix build): Augment description of '-e'.
* guix/scripts/substitute-binary.scm (with-timeout): Update comment to
mention the fix's commit ID.
(fetch): In the 'with-timeout' handler, close PORT only one Guile
versions < 2.0.9.39. Before that, on Guile >= 2.0.9.39, the HTTP
client would end up trying to read from a closed file descriptor.
* guix/derivations.scm (map-derivation)[input->output-paths]: Allow
non-derivation inputs.
Allow replacements to be store files. Replace in SOURCES too.
* tests/derivations.scm ("map-derivation, sources"): New test.
* guix/packages.scm (package-source-derivation): Don't let indirect
store paths pass through.
* tests/packages.scm ("package-source-derivation, indirect store path"):
New test.
* guix/scripts/substitute-binary.scm (%lookup-threads): New variable.
(guix-substitute-binary): Use 'n-par-map' instead of 'par-map' for
batch 'lookup-narinfo' calls.
* guix/packages.scm (<origin>): Add 'snippet', 'modules', and
'imported-modules' fields.
(patch-and-repack): Make 'inputs' a keyword parameter. Add 'snippet',
'modules', and 'imported-modules' parameters. Accept SOURCE as a raw
file name. Insert SNIPPET in BUILDER. Pass IMPORTED-MODULES to
'build-expression->derivation'.
(package-source-derivation): Pass the extra arguments to
'patch-and-repack'.
* tests/packages.scm ("package-source-derivation, snippet"): New test.
* doc/guix.texi (Defining Packages): Mention the 'patches' and 'snippet'
fields.
(Invoking guix build): Tell that --source has patches and snippets
applied.
(Software Freedom): Mention packages that contain non-free code.
Fixes <http://bugs.gnu.org/15756>.
* guix/profiles.scm (<manifest-pattern>): New record type.
(remove-manifest-entry): Remove.
(entry-predicate, manifest-matching-entries): New procedures.
(manifest-remove): Accept a list of <manifest-pattern>.
(manifest-installed?): Replace 'name' parameter by 'pattern', a
<manifest-pattern>.
* guix/scripts/package.scm (options->removable): Return a list of
<manifest-pattern>.
(guix-package)[process-action]: Use 'manifest-matching-entries' to
compute the list of packages to remove.
* tests/profiles.scm: New file.
* Makefile.am (SCM_TESTS): Add it.
* guix/scripts/package.scm (options->removable): New procedure.
(guix-package)[process-actions]: Use it. Rename 'remove*' to 'remove'
and 'install*' to 'install'.
* guix/ui.scm (package-specification->name+version+output): New
procedure.
* guix/scripts/package.scm (specification->package+output): Use it.
* tests/ui.scm ("package-specification->name+version+output"): New test.
* guix/scripts/package.scm (<manifest-entry>): Add 'inputs' field.
(manifest=?, lower-input): New procedure.
(profile-derivation)[builder]: Add #:log-port argument to
'union-build'.
[ensure-valid-input]: Remove.
Add each entry's inputs to the input list.
(options->installable): Return just the list of entries.
[package->manifest-entry]: Set 'inputs' field.
[canonicalize-deps]: Rename to...
[deduplicate]: ... this. Remove input fiddling.
(guix-package)[process-actions]: Use 'manifest=?' to compare the new
and old manifests. Pass directly PROF-DRV to 'show-what-to-build'.
Pass #:print-build-trace #f to 'set-build-options'.
* guix/scripts/package.scm (%user-environment-directory): Rename to...
(%user-profile-directory): ... this. Update users accordingly.
(profile-derivation): Use the term "profile" instead of "user
environment", and use "profile" as the derivation name.
* guix/scripts/package.scm (<manifest>, <manifest-entry>): New record
types.
(make-manifest, read-manifest, manifest->sexp, sexp->manifest,
read-manifest, write-manifest, remove-manifest-entry, manifest-remove,
manifest-installed?): New procedures.
(profile-derivation): Take a manifest as the second parameter. Use
'manifest->sexp'. Expect <manifest-entry> objects instead of
"tuples". Adjust callers accordingly.
(search-path-environment-variables): Changes 'packages' parameter to
'entries'. Rename 'package-in-manifest->package' to
'manifest-entry->package'; expect <manifest-entry> objects.
(display-search-paths): Rename 'packages' to 'entries'.
(options->installable): Change 'installed' to 'manifest'. Have
'canonicalize-deps' return name/path tuples instead of raw packages.
Rename 'package->tuple' to 'package->manifest-entry'. Use
<manifest-entry> objects instead of tuples.
(guix-package)[process-actions]: Likewise. Rename 'packages' to
'entries'.
[process-query]: Use 'manifest-entries' instead of
'manifest-packages'.
* guix/scripts/package.scm (find-package): Rename to...
(specification->package+output): ... this. Rename 'name' parmameter
to 'spec'. Return a package and output name instead of a tuple.
(options->installable): New procedure
(guix-package)[process-actions]: Use it, and remove corresponding
code.
Previously references to '%standard-phases' in builder-side code would
refer to the wrong one.
* guix/build-system/cmake.scm (cmake-build): Remove (guix build
gnu-build-system) from the default MODULES value.
* guix/build-system/perl.scm (perl-build): Likewise.
Reported at <http://bugs.gnu.org/15608>.
* guix/build/utils.scm (find-files): Change the 'error' procedure to
return RESULT. Before we would end up with an improper list.
* guix/records.scm (define-record-type*): Wrap field bindings in a
'let*', not in a 'letrec*', which turned out to be pointlessly
inconvenient.
* tests/records.scm: Adjust test names accordingly.
* scripts/guix.in (config-lookup): Add "localedir" entry.
(run-guix-main): Add call to 'bindtextdomain'.
* guix/ui.scm (initialize-guix): Use %GETTEXT-DOMAIN instead of a
literal.
* guix/gnu-maintenance.scm (%gnumaint-base-url): New variable.
(%package-list-url): Use it.
(%gsrc-package-list-url): Remove.
(%package-description-url): New variable.
(official-gnu-packages): Change to use %PACKAGE-DESCRIPTION-URL
instead of %GSRC-PACKAGE-LIST-URL. Adjust recutils field names
accordingly.
See <https://lists.gnu.org/archive/html/guix-devel/2013-09/msg00137.html>
for the rationale.
* guix/packages.scm (<origin>)[patches, patch-flags, patch-inputs,
patch-guile]: New fields.
(%standard-patch-inputs, default-guile, patch-and-repack): New
procedures.
(package-source-derivation): When 'patches' is non-empty, call
'patch-and-repack'.
* guix/utils.scm (file-sans-extension): New procedure.
* guix/monads.scm (<monad>): Turn in a raw SRFI-9 record type.
(define-monad): New macro.
(with-monad): Add a case for when MONAD is a macro.
(identity-return, identity-bind, store-return, store-bind): Inline.
(%identity-monad, %store-monad): Use 'define-monad'.
* tests/monads.scm ("monad?"): New test.
* guix/monads.scm: New file.
* tests/monads.scm: New file.
* Makefile.am (MODULES): Add guix/monads.scm.
(SCM_TESTS): Add tests/monads.scm.
* doc/guix.texi (The Store Monad): New node.
(The Store): Reference it.
* guix/build-system/trivial.scm (trivial-build): When SOURCE is true,
add it to INPUTS.
(trivial-cross-build): Likewise.
* tests/packages.scm ("trivial with source"): New test.
* guix/scripts/package.scm (switch-to-previous-generation): New function.
(roll-back): Use the new function instead of 'switch-link'.
(show-help): Add '--delete-generations'.
(%options): Likewise.
(guix-package)[process-actions]: Add 'current-generation-number',
'display-and-delete', and 'delete-generation'. Add support for
'--delete-generations', and reindent the code.
* tests/guix-package.sh: Test '--delete-generations'.
* doc/guix.texi (Invoking guix-package): Document '--delete-generations'.
* guix/scripts/package.scm (guix-package)[process-query]: Show that a
generation is the current one if the profile points to it.
* tests/guix-package.sh: Test it.
* guix/scripts/package.scm (guix-package)[process-query]: Change
'list-generation' to not list the zeroth generation.
* tests/guix-package.sh: Test it.
* doc/guix.texi (Invoking guix package): Document it, and use the
right term when talking about generations.
* guix/scripts/package.scm (guix-package)[process-query]: Exit with 1
when a generation does not exist or the profile points to the zeroth
generation.
* tests/guix-package.sh: Test the former case.
Suggested by Andreas Enge <andreas@enge.fr>.
* guix/scripts/package.scm (guix-package)[list-generations,
list-installed]: Reverse the result of 'manifest-packages'.
* doc/guix.texi (Invoking guix package): Document the order of packages
for '--list-generations' and '--list-installed'.
Fixes <http://bugs.gnu.org/15428>.
Reported by Cyrill Schenkel <cyrill.schenkel@gmail.com>.
* guix/scripts/pull.scm (guix-pull): 'unpack' returns a single value.
* guix/derivations.scm (derivation->output-path,
derivation->output-paths): New procedures.
(derivation-path->output-path): Use 'derivation->output-path'.
(derivation-path->output-paths): Use 'derivation->output-paths'.
(derivation): Accept 'derivation?' objects as inputs. Return a single
value.
(build-derivations): New procedure.
(compiled-modules): Use 'derivation->output-paths'.
(build-expression->derivation)[source-path]: Add case for when the
input matches 'derivation?'.
[prologue]: Accept 'derivation?' objects in INPUTS.
[mod-dir, go-dir]: Use 'derivation->output-path'.
* guix/download.scm (url-fetch): Adjust to the single-value return.
* guix/packages.scm (package-output): Use 'derivation->output-path'.
* guix/scripts/build.scm (guix-build): When the argument is
'derivation-path?', pass it through 'read-derivation'.
Use 'derivation-file-name' to print out the .drv file names, and to
register them. Use 'derivation->output-path' instead of
'derivation-path->output-path'.
* guix/scripts/package.scm (roll-back): Adjust to the single-value
return.
(guix-package): Use 'derivation->output-path'.
* guix/ui.scm (show-what-to-build): Adjust to deal with 'derivation?'
objects instead of .drv file names.
* gnu/system/grub.scm (grub-configuration-file): Use
'derivation->output-path' instead of 'derivation-path->output-path'.
* gnu/system/vm.scm (qemu-image, system-qemu-image): Likewise.
* tests/builders.scm, tests/derivations.scm, tests/packages.scm,
tests/store.scm, tests/union.scm: Adjust to the new calling
convention.
* doc/guix.texi (Defining Packages, The Store, Derivations): Adjust
accordingly.
* guix/derivations.scm (<derivation>): Add 'file-name' field.
(%read-derivation): Use (port-filename DRV-PORT) as the file name for
the result.
(derivation): Set the 'file-name' field in the result.
* tests/derivations.scm ("build derivation with 1 source"): Assert that
'derivation-file-name' returns the right thing.
Ludovic Courtès