* gnu/system/install.scm (os-with-u-boot): New procedure.
* gnu/packages/bootloaders.scm (make-u-boot-package): Export.
* doc/guix.texi (Building the Installation Image for ARM Boards): New
subsection.
The next commits make (sqlite3) an indirect dependency of (gnu build
install), which is itself used by (guix scripts system), hence this new
requirement.
* configure.ac: Error out when $guix_cv_have_recent_guile_sqlite3 is
false. Remove HAVE_GUILE_SQLITE3 Automake conditional.
* Makefile.am (MODULES, SCM_TESTS): Remove HAVE_GUILE_SQLITE3 conditions.
* doc/guix.texi (Requirements): Add Guile-SQLite3.
* README: Ditto.
* gnu/packages/package-management.scm (guix)[propagated-inputs]: Add
GUILE-SQLITE3.
[arguments]: In 'wrap-program' phase, take guile-sqlite3 into account.
This helpful when adding content to the nginx configuration file, which isn't
supported by the record type used for the configuration. For example, like
adding proxy_cache_path configuration.
* gnu/packages/web.scm (<nginx-configuration>): Add new extra-content field.
(nginx-configuration-extra-content): New field accessor.
(default-nginx-config): Add support for the extra-content field.
* doc/guix.texi (NGINX): Document the new extra-content field.
* guix/scripts/pull.scm (%pull-version): New variable.
(build-from-source): Pass #:pull-version to BUILD.
(whole-package-for-legacy, derivation->manifest-entry): New procedure.
(build-and-install): Rewrite in terms of 'build-and-use-profile'.
* guix/scripts/system.scm (maybe-suggest-running-guix-pull)[latest]:
Switch to "/current".
* scripts/guix.in (augment-load-paths!): Remove use of
~/.config/guix/latest.
* build-aux/compile-as-derivation.scm: Replace "/guix/latest/" with
"/current/share/guile/site/X.Y"
* guix/scripts.scm (warn-about-old-distro)[age]: Check "/current"
instead of "/latest".
* doc/guix.texi (Invoking guix pull): Document it.
* doc/contributing.texi (Running Guix Before It Is Installed): Remove
footnote about abusing ~/.config/guix/latest.
The 'no-negcache?' option is mapped to the '--no-negcache' command-line
argument directly, but we're in the scheme world, where the general guideline
is to avoid double-negations in identifiers.
* gnu/services/dns.scm <dnsmasq-configuration>: Replace the 'no-negcache?'
field with 'negative-cache?'.
* doc/guix.texi (DNS Services)[Dnsmasq Service]: Adjust accordingly.
* gnu/services/dns.scm (dnsmasq-service-type): New variable.
(<dnsmasq-configuration>): New record type.
(dnsmasq-shepherd-service): New procedure.
* doc/guix.texi (DNS Services): Document it.
The 'title' field was easily overlooked and was an endless source of
confusion. Now, the value of the 'device' field is self-contained.
* gnu/system/file-systems.scm (<file-system>): Change constructor name
to '%file-system'.
[title]: Remove.
(<file-system-label>): New record type with printer.
(report-deprecation, device-expression)
(process-file-system-declaration, file-system): New macros.
(file-system-title): New procedure.
(file-system->spec, spec->file-system): Adjust to handle
<file-system-label>.
* gnu/system.scm (bootable-kernel-arguments): Add case for
'file-system-label?'.
(read-boot-parameters): Likewise.
(mapped-device-user): Avoid 'file-system-title'.
(fs->boot-device): Remove.
(operating-system-boot-parameters): Use 'file-system-device' instead of
'fs->boot-device'.
(device->sexp): Add case for 'file-system-label?'.
* gnu/bootloader/grub.scm (grub-root-search): Add case for
'file-system-label?'.
* gnu/system/examples/bare-bones.tmpl,
gnu/system/examples/beaglebone-black.tmpl,
gnu/system/examples/lightweight-desktop.tmpl,
gnu/system/examples/vm-image.tmpl: Remove uses of 'title'.
* gnu/system/vm.scm (virtualized-operating-system): Remove uses of
'file-system-title'.
* guix/scripts/system.scm (check-file-system-availability): Likewise,
and adjust fix-it hint.
(check-initrd-modules)[file-system-/dev]: Likewise.
* gnu/build/file-systems.scm (canonicalize-device-spec): Remove 'title'
parameter.
[canonical-title]: Remove.
Match on SPEC's type rather than on CANONICAL-TITLE.
(mount-file-system): Adjust caller.
* gnu/build/linux-boot.scm (boot-system): Interpret ROOT here.
* gnu/services/base.scm (file-system->fstab-entry): Remove use of
'file-system-title'.
* doc/guix.texi (File Systems): Remove documentation of the 'title'
field. Rewrite documentation of 'device' and document
'file-system-label'.
Instead of having the service manage the list, it's useful to be able to point
this at an existing file, for example, when using cgit together with gitolite.
* gnu/services/cgit.scm (project-list?): New procedure.
(serialize-project-list): Handle file-object values.
(<cgit-configuration>): Change the predicate for project-list to allow lists
and file-objects.
* nix/libstore/build.cc (canBuildLocally): Allow building armhf-linux
builds on aarch64-linux.
(DerivationGoal::runChild) Throw error if attempting to build for
armhf-linux on an unsupported platform.
* doc/guix.texi (Invoking guix build): Document how to build natively
for armhf-linux on aarch64-linux. Add note that on some aarch64
machines this is unsupported.
Suggested by Martin Castillo <castilma@uni-bremen.de>.
Fixes <https://bugs.gnu.org/31456>.
* doc/guix.texi (Invoking guix size): Clarify that 'guix size' looks for
ungrafted packages. Clarify that it can be passed several package
specifications.
* gnu/packages/aux-files/run-in-namespace.c: New file.
* Makefile.am (AUX_FILES): Add it.
* guix/scripts/pack.scm (<c-compiler>): New record type.
(c-compiler, bootstrap-c-compiler, c-compiler-compiler): New procedures.
(self-contained-tarball): Use
'relative-file-name' for the SOURCE -> TARGET symlink.
(docker-image): Add 'defmod' to please Geiser.
(wrapped-package, map-manifest-entries): New procedures.
(%options, show-help): Add --relocatable.
(guix-pack): Honor it.
* gnu/services/base.scm (%default-gpm-options): New variable.
(<gpm-configuration>)[gpm, options]: Add default values.
(gpm-service-type)[default-value]: New field.
(gpm-service): Use %DEFAULT-GPM-OPTIONS and mark as deprecated.
* doc/guix.texi (Base Services): Document 'gpm-service-type' and
'gpm-configuration'. Remove 'gpm-service'.
* doc/guix.texi (Networking Services): Document it.
* gnu/services/networking.scm (dhcpd-service-type): Add it.
(dhcpd-configuration, dhcpd-configuration?): Add it.
(dhcpd-configuration-package): Add it.
(dhcpd-configuration-config-file): Add it.
(dhcpd-configuration-version): Add it.
(dhcpd-configuration-run-directory): Add it.
(dhcpd-configuration-lease-file): Add it.
(dhcpd-configuration-pid-file): Add it.
(dhcpd-configuration-interfaces): Add it.
* gnu/tests/networking.scm (minimal-dhcpd-v4-config-file)
(dhcpd-v4-configuration, %dhcpd-os, run-dhcpd-test, %test-dhcpd): New
variables.
* po/doc/contributing.pot: New file.
* po/doc/guix.pot: New file.
* po/doc/local.mk: New file.
* Makefile.am: Include it. Add gettext command. Add silent rules for po4a.
* configure.ac: Look for po4a-translate and po4a-updatepo.
* doc/local.mk: Add rules to generate translated texi files.
(TRANSLATED_INFO): New variable.
(BUILT_SOURCES, EXTRA_DIST, MAINTAINERCLEANFILES): Add it.
* .gitignore: Add generated files.
* doc/guix.texi (Version Control Services): Update accordingly.
* gnu/services/cgit.scm (cgit-configuration)[project-list]: New field.
(serialize-project-list): New procedure that uses PLAIN-FILE to generate a
file from the string list given by the user as input.
(serialize-cgit-configuration): Make sure to serialize 'project-list' before
'repostory-directory'.
* guix/gexp.scm (<scheme-file>)[splice?]: New field.
(scheme-file): Add #:splice? and pass it to '%scheme-file'.
(scheme-file-compiler): Pass SPLICE? to 'gexp->file'.
(gexp->file): Add #:splice? and honor it.
* tests/gexp.scm ("gexp->file + #:splice?"): New test.
("gexp->derivation & with-imported-module & computed module"): Use
#:splice? #t.
* etc/guix-install.sh (ROOT_HOME): New variable.
(sys_create_store, sys_enable_guix_daemon, sys_authorize_build_farms):
Use ROOT_HOME instead of ~root or the HOME environment variable.
* doc/guix.texi (Binary Installation): Instead of assuming that ~ and
$HOME refer to root's directory simply because commands are being run
as root, explicilty refer to it via ~root.
Fixes: <https://bugs.gnu.org/30728>
* gnu/system/vm.scm (system-docker-image): New procedure.
* guix/scripts/system.scm (system-derivation-for-action): Add a case for
docker-image, and in that case, call system-docker-image.
(show-help): Document docker-image.
(guix-system): Parse arguments for docker-image.
* doc/guix.texi (Invoking guix system): Document "guix system
docker-image".
* gnu/system/examples/docker-image.tmpl: New file.
* guix/scripts/pack.scm (bootstrap-xz): New variable.
(%options) <--bootstrap>: New option.
(show-help): Document the new --bootstrap option.
(guix-pack): When --bootstrap is specified, use the bootstrap Guile,
tar, and xz to build the pack, and do not use any profile hooks or
locales.
* doc/guix.texi (Invoking guix pull): Document the new --bootstrap
option.
* tests/guix-pack.sh: New file.
* Makefile.am (SH_TESTS): Add guix-pack.sh.
* gnu/packages/package-management.scm (guix) <inputs>: Add util-linux.
* doc/guix.texi (Base Services): Add realtime and jackd indices to the
`pam-limits-service' service, as the examples shows how they can be
configured.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/packages/ntp.scm (openntpd)[arguments]: Add 'configure-flags to
set openntpd daemon's user and localstatedir. Add a custom phase to not
try to create said directory at install time.
* gnu/services/networking.scm (<openntpd-configuration>): New record type.
(openntpd-shepherd-service, openntpd-service-activation): New procedures.
(openntpd-service-type): New variable.
* doc/guix.texi (Networking Services): Add openntpd documentation.
* doc/guix.texi (Messaging Services): Update accordingly.
* gnu/services/configuration.scm (serialize-configuration,
serialize-maybe-stem, serialize-package): Return strings or string-valued
gexps (these procedures were only used for their side-effects).
* gnu/services/messaging.scm (serialize-field, serialize-field-list,
enclose-quotes, serialize-raw-content, serialize-ssl-configuration,
serialize-virtualhost-configuration-list,
serialize-int-component-configuration-list,
serialize-ext-component-configuration-list,
serialize-virtualhost-configuration, serialize-int-component-configuration,
serialize-ext-component-configuration, serialize-prosody-configuration):
Return strings or string-valued gexps and stop printing.
(prosody-activation): Use SERIALIZE-PROSODY-CONFIGURATION's return value with
MIXED-TEXT-FILE instead of using its output with PLAIN-FILE.
(serialize-non-negative-integer, serialize-non-negative-integer-list): Convert
numbers to strings.
(file-object?, serialize-file-object, file-object-list?,
serialize-file-object-list): New procedures.
(ssl-configuration)[capath, cafile], (prosody-configuration)[plugin-paths,
groups-file]: Replace FILE-NAME with FILE-OBJECT.
* guix/gexp.scm (file-like?): New exported procedure.
Fixes a regression in installation tests, whereby 'guix system init'
would report that virtio modules are missing for the target devices.
In practice virtio modules were always available since 'base-initrd' was
always called with #:virtio? #t. This commit simply moves them to
'%base-initrd-modules' so that 'guix system' knows they're available.
Reported by Danny Milosavljevic <dannym@scratchpost.org> at
<https://debbugs.gnu.org/cgi/bugreport.cgi?bug=30629#112>.
* gnu/system/linux-initrd.scm (default-initrd-modules): Add virtio
modules.
(base-initrd): Remove #:virtio? and 'virtio-modules'.
* gnu/system/vm.scm (expression->derivation-in-linux-vm)
(system-qemu-image, virtualized-operating-system): Remove uses of
#:virtio?.
* doc/guix.texi (Initial RAM Disk): Update 'base-initrd' doc.
* gnu/system.scm (<operating-system>)[initrd-modules]: New field.
(operating-system-initrd-file): Pass #:linux-modules to 'make-initrd'.
* gnu/system/linux-initrd.scm (default-initrd-modules): New procedure.
(%base-initrd-modules): New macro.
(base-initrd): Add #:linux-modules and honor it.
* gnu/system/install.scm (embedded-installation-os): Use
'initrd-modules' instead of 'initrd'.
* gnu/tests/install.scm (%raid-root-os): Likewise.
* doc/guix.texi (operating-system Reference): Add 'initrd-modules'.
(Initial RAM Disk): Document it. Adjust example to not use
#:extra-modules.
This change allows overriding the home directory of all filesystem mappings to
help hide the identity of the calling user in a container.
* doc/guix.texi (Invoking guix environment)[--container]: Mention --user.
[--user]: Add item.
* guix/scripts/environment.scm (show-help): Add --user.
(%options): Add --user.
(launch-environment/container) Add 'user' parameter. Update doc. Override
'user-mappings' using 'override-user-mappings'. Consider override for chdir.
(mock-passwd, user-override-home, overrid-euser-dir): New procedures.
(guix-environment): Disallow --user without --container. Provide user to
'launch-environment/container'.
* tests/guix-environment.sh: Add user test.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
This change is motivated by attempts to run programs (like GNU IceCat) within
containers. The 'fontconfig' program, for example, is configured explicitly
to check ~/.guix-profile for additional fonts.
There were no existing container tests in 'tests/guix-environment.sh', but I
added one anyway for this change.
* doc/guix.texi (Invoking guix environment): Add '--link-profile'.
* guix/scripts/environment.scm (show-help): Add '--link-profile'.
(%options): Add 'link-profile' as '#\P', assigned to 'link-profile?'.
(link-environment): New procedure.
(launch-environment/container): Use it when 'link-profile?'.
[link-profile?]: New parameter.
(guix-environment): Leave when '--link-prof' but not '--container'. Add
'#:link-profile?' argument to 'launch-environment/container' application.
* tests/guix-environment-container.sh: New '--link-profile' test.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* doc/guix.texi (Certificate Services): Document <certificate-configuration>,
the change from domains to certificates and the fact that their path is now
derived from their name.
* gnu/services/certbot.scm (<certificate-configuration>): Add and export it.
(certbot-configuration, certbot-command, certbot-activation,
certbot-nginx-server-configurations, certbot-service-type): Replace 'domains'
with 'certificates'.
(certbot-nginx-server-configurations): Use only one nginx-server-configuration
and use all certificate domains as the server-name.
* gnu/services/xorg.scm (slim-shepherd-service): Use SESSREG to register X11
session.
* doc/guix.texi (slim-configuration): Document new field "sessreg".
Partitions can have their own labels and UUIDs (e.g. under GPT) that are
unrelated to those of the contained file system. Confusing the two ends
poorly.
* doc/guix.scm (File Systems, Proceeding with the Installation)
(Using the Configuration System, Initial RAM Disk): Substitute `file
system' for `partition' when talking about labels and UUIDs.
The text refers to a snippet which has since been removed, but a
suitable replacement is near. Use it.
* doc/guix.texi (Using the Configuration System): Substitute bind for
tcpdump.
Suggested by Danny Milosavljevic <dannym@scratchpost.org>.
* doc/guix.texi (Printing Services): Mention how to add support for
Epson printers to CUPS via escpr in the configuration example.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
This simplifies OS configuration: users no longer need to be aware of
what a given service depends on.
See the discussion at
<https://lists.gnu.org/archive/html/guix-devel/2018-01/msg00114.html>.
* gnu/services.scm (missing-target-error): New procedure.
(service-back-edges): Use it.
(instantiate-missing-services): New procedure.
* gnu/system.scm (operating-system-services): Call
'instantiate-missing-services'.
* tests/services.scm ("instantiate-missing-services")
("instantiate-missing-services, no default value"): New tests.
* gnu/services/version-control.scm (cgit-service-type)[extensions]: Add
FCGIWRAP-SERVICE-TYPE.
* gnu/tests/version-control.scm (%cgit-os): Remove NGINX-SERVICE-TYPE
and FCGIWRAP-SERVICE-TYPE instances.
* doc/guix.texi (Log Rotation): Remove 'mcron-service-type' in example.
(Miscellaneous Services): Remove 'nginx-service-type' and
'fcgiwrap-service-type' in Cgit example.
* gnu/services/desktop.scm (<mate-desktop-configuration>,
mate-desktop-service-type): New variable.
(mate-desktop-service): New public variable.
* doc/guix.texi (Desktop Services): Document the service.
Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org>
* guix/scripts/build.scm (numeric-extension?, tarball-base-name): New
procedures, formerly in 'package-with-source'.
(transform-package-source)[new-sources]: Look for '=' in URI. Each
element of the list of now a (PKG VERSION SOURCE) tuple.
Pass VERSION to 'package-with-source'.
(package-with-source): Add 'version' parameter and honor it.
* tests/scripts-build.scm ("options->transformation, with-source, PKG=URI")
("options->transformation, with-source, PKG@VER=URI"): New tests.
* doc/guix.texi (Package Transformation Options): Document the new
forms.
* gnu/services/base.scm (urandom-seed-service-type)[default-value]: New
field.
(urandom-seed-service): Mark as deprecated.
(%base-services): Use URANDOM-SEED-SERVICE-TYPE directly.
* gnu/services/base.scm (%base-services):
* doc/guix.texi (Base Services): Document 'urandom-seed-service-type'
instead of 'urandom-seed-service'.
* gnu/services/base.scm (urandom-seed-shepherd-service): Try to read from
'/dev/hwrng' at boot, as a supplement to any saved random seed.
* doc/guix.texi (Base Services): Document the new feature.
* guix/scripts/offload.scm (check-machine-status): New procedure.
(guix-offload): Call it when the argument is "status".
* doc/guix.texi (Daemon Offload Setup): Document it.
* guix/scripts/system.scm (show-help): Add expression option.
(%options): Ditto.
(guix-system): Allow commands taking a file as an argument to use an
expression instead.
(process-action): Read operating-system from expression or file.
* doc/guix.texi (Invoking guix system): Introduce the expression option.
The nginx service can fail to start if the server names hash bucket size is
too small, which can happen on some systems, and when using QEMU, depending on
the CPU.
* gnu/services/web.scm (<nginx-configuration>): Add
server-names-hash-bucket-size and server-names-hash-bucket-max-size.
(default-nginx-config): Add support for the new hash bucket size parameters.
(nginx-service, nginx-activation): Pass the new hash bucket size parameters
through to the default-nginx-config procedure.
* doc/guix.texi (Web Services): Document the new hash bucket size parameters.
If nginx is configured with a ssl-certificate file, and ssl-certificate-key,
it will fail to start unless these exist. To avoid this happening, change the
default to #f.
* gnu/services/web.scm (<nginx-server-configuration>)
[ssl-certificate,ssl-certificate-key]: Set the defaults to #f.
* gnu/tests/web.scm (%nginx-servers): Remove redundant
nginx-server-configuration fields.
* doc/guix.texi (Web Services): Update examples and documentation.
In commit ee17a9e06e, the helpers git-version
and git-file-name removed the need to build version and file name strings
manually for packages that use VCS snapshots.
doc/guix.texi (Version Numbers): Use git-version and git-file-name.
This avoids repeated deprecation messages, particularly while running
'guix system build' or similar.
* guix/gexp.scm (gexp->derivation): Add #:deprecation-warnings. Pass it
to 'compiled-modules'.
(compiled-modules): Add #:deprecation-warnings and honor it.
* doc/guix.texi (G-Expressions): Update 'gexp->derivation'
documentation.
* guix/packages.scm (patch-and-repack): Pass #:deprecation-warnings #t.
* doc/guix.texi (Version Control Services): Add documentation on the HTTP
backend for git.
* gnu/services/version-control.scm (<git-http-configuration>): New data type.
(git-http-nginx-location-configuration): New helper function.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/xorg.scm (xinitrc)[builder](system-profile)
(user-profile): New variables.
(xsession-command, find-session): New procedures.
When FALLBACK-SESSION is #f, find a valid session at run time.
* doc/guix.texi (X Window): Adjust accordingly, and insist that one
or more window managers must be installed.
* gnu/services/xorg.scm (<slim-configuration>): Provide default values
for all fields.
(slim-service-type)[default-value]: New field.
* doc/guix.texi (X Window): Remove 'slim-service' documentation.
Document 'slim-service-type' and 'slim-configuration'.
* gnu/services/desktop.scm (%desktop-services): Use 'slim-service-type'.
* gnu/services/xorg.scm (%default-xorg-fonts): New variable.
(xorg-configuration-file): Add #:modules and #:fonts. Rewrite to return
a 'computed-file' that honors MODULES and FONTS.
(xorg-wrapper): Pass #:modules to 'xorg-configuration-file'.
(xorg-start-command): Add #:fonts. Pass #:fonts and #:modules to
'xorg-configuration-file'.
* doc/guix.texi (X Window): Adjust documentation of 'xorg-start-command'
and 'xorg-configuration-file'.
* doc/guix.texi (Messaging Services): Regenerate it.
* gnu/services/configuration.scm (show-default?): Check VAL rather than DEFAULT.
* gnu/services/messaging.scm (show-default?): Check VAL rather than DEFAULT.
(prosody-configuration)[modules-enabled]: Remove default value from docstring.
* doc/guix.texi (Messaging Services): Add "mam" as a module example. Document
'prosodyctl check'. Replace 'prosodyctl cert request' with 'prosodyctl cert
import'. Regenerate it.
* gnu/services/messaging.scm (serialize-module-list): Remove "posix" from the
default modules list because it is now automatically loaded.
(ssl-configuration)[key, certificate]: Remove them because they are now
automatically located. Fix their docstrings.
(%default-modules-enabled): Add "carbons" and "blocklist".
(prosody-configuration)[certificates]: Set default directory from which
certificates/keys will be automatically located.
* doc/guix.texi (Substitutes): Move information into sections, and create one
new subsection regarding substitution failure.
(Top): In the detailed listing, add entries for the new subsections.
(Official Substitute Server): Move info about hydra here. Add information
that explains when substitutes are enabled by default.
(Substitute Server Authorization): Move information about how to enable or
disable substitutes here.
(Substitute Authentication): Move information about how Guix authenticates
substitutes here.
(Proxy Settings): Move information about how to download substitutes via
proxy here.
(Substitution Failure): New section. Add information about how Guix handles
substitution failure. Be extra clear about behavior concerning --fallback.
(On Trusting Binaries): Move information about trusting binaries here.
(Invoking guix-daemon): Remove an incorrect statement about when substitutes
are enabled by default.
(Common Build Options): Add cross-references for the --fallback option.
Co-authored-by: George Clemmer <myglc2@gmail.com>
This is a followup to b8f59cdc20e9d83ce63523ef917e95fcee07f134:
'list-runtime-roots' no longer depends on 'lsof'.
* gnu/services/base.scm (<guix-configuration>)[lsof]: Remove.
(guix-shepherd-service): Adjust accordingly.
* doc/guix.texi (Base Services): Adjust accordingly.
* gnu/system.scm (%base-packages): Remove LSOF.
* guix/scripts/challenge.scm (summarize-report-list): New procedure.
(guix-challenge): Use it.
* doc/guix.texi (Invoking guix challenge): Adjust command output in
example.
This function allows passing a file-like object to the udev service.
* gnu/services/base.scm (file->udev-rule): New function.
* doc/guix.texi (Base Services): Document it.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/system/examples/lightweight-desktop.tmpl <file-systems>: Add a
UUID for the /boot/efi partition.
* doc/guix.texi (Using the Configuration System): Mention it.
* guix/build-system/ant.scm: Add #:test-include and #:test-exclude
arguments.
* guix/build/ant-build-system.scm: Generate test list from arguments.
* doc/guix.texi (Build Systems): Document it.
* guix/build-system/ant.scm: New #:main-class argument
* guix/build/ant-build-system.scm: Generate a manifest file with
additional properties.
* doc/guix.texi (Build Systems): Document it.
* gnu/services/web.scm (<nginx-server-configuration>): Add
nginx-server-configuration-try-files.
(emit-nginx-server-config): Use it.
* doc/guix.texi (Web Services): Document it.
* doc/contributing.texi (Submitting Patches): Add a note about closing bug
threads by mailing to NNN-done@debbugs.gnu.org.
Suggested-by: Nicolas Goaziou <mail@nicolasgoaziou.fr>
Searching for `git send-email' took you to the end of `Submitting Patches'
section which said
You may use your email client or the ‘git send-email’ command.
without further warning or remark.
* doc/contributing.texi (Sending a Patch Series): Move information about
debbugs bug 15361 to subsection. Add git-send-email index entries.
(Submitting Patches): Reference it.
Danny Milosavljevic