When an X11 window is closed (say, urxvt), i3 gets an UnmapNotify event
and destroys (DestroyWindow) the window decorations. Before this commit,
the DestroyWindow call was sent immediately.
This lead to a situation where — due to the DestroyNotify — EnterNotify
events were generated that would cause the focus to be set to the
underlying window.
With this commit, i3 first renders the tree and pushes changes to X11
before calling DestroyWindow. Therefore, the surrounding containers will
take up any space that was freed by the window which was closed and no
EnterNotify will be generated.
fixes#660
• our function names use underscores
• rewrote the function’s comment
• function comments must be in the source _and_ in the header
• no blank lines after function signatures
Add a `current' and `old' properties to the `focus' change type,
containing the current and old workspace respectively. These additions
are not necessary anywhere else because `focus' is always triggered when
changing ws.
The corresponding command is 'rename workspace to <name>'. As a side-effect
this fixes the command 'rename workspace 1 to to'.
Signed-off-by: Michael Walle <michael@walle.cc>
With this commit, the default behavior is to display popups while there
is a fullscreen application only if the popup belongs to that
application (as determined by the WM_TRANSIENT_FOR hint which
applications have to set properly).
fixes#663
Focusing child from a workspace should now skip over the floating con and
go directly to its child. Focusing parent from that grandchild should leave
the workspace focused again.
As the workspace might be reached via recursion (e.g. moving from the edge
of a fullscreen split container), it's necessary to check for a fullscreen
container whenever a workspace is reached.
If a window with _NET_STARTUP_ID set is moved to another workspace, it
will delete any associated startup sequence immediately. This will also
occur if a window has a leader with _NET_STARTUP_ID set, if the leader
has no container (never been mapped).
A startup sequence may also be deleted if it's matched by
startup_workspace_for_window() and its 30-second timeout has elapsed.
This avoids a case where a fullscreen container could be moved onto a
workspace that already had its own fullscreen container, leading to
two fullscreen containers on top of each other.
Previously, while the loop would not be executed anymore, the callback
(for actually repositioning the window after a MotionNotify) would still
get called once. This commit avoids that, thus fixing the crash.
fixes#819
Fix a crash that occured when moving a window to the scratchpad that is
seemingly floating to the user, but actually a descendant of a floating
parent con (and itself non-floating). If that is the case, move the
floating parent container to scratchpad instead of the window.
fixes#740
This commit breaks floating window keyboard focus order
(t/135-floating-focus.t) when you have > 2 floating windows. Since
keyboard focus is more important than saving one click to raise floating
windows, I revert the commit.
Note that we cannot implement this without keeping a third list (beneath
floating_windows and focus) for the z coordinate of a floating window.
This seems not worth it.
This reverts commit 064be457e5.
This makes our signal handler useless and leads to infinite SIGSEGV
loops because the ev callback handler gets called only from within the
event loop, and control doesn’t necessary get to the event loop…
This reverts commit 514265b529.
If there is a single floating con on a separate workspace that is not
focused, and this con becomes urgent, switching back to that workspace
may result in a crash of i3. This is because while setting the urgency
of parent containers, 'parent' may become NULL in case of floating
containers. This commit checks the validity of parent.
fixes#821
We need to verify that setting the event mask works, and we need to
include StructureNotify to get unmap events at any point in time.
Thanks darkraven for the pointer.
fixes#718
Previously, when you had an urgent container in a stack on some
invisible workspace (say urxvt) and you switched to it, the urgency hint
was not properly cleared.
Previously, i3 would send width=0, height=0 to windows which were put on
workspaces created by an assignment (that is, invisible workspaces,
which do not get rendered normally).
fixes#653
The removed code was add by commit 61b8a62 to fix#564. That bug is cause
by rendering the mplayer window again as a floating window (even if it
has been rendered before as a fullscreen window, at line 202). So simply
checking for fullscreen window is enough to solve this problem. Treating
floating/tiling fullscreen window differently is not needed.
A good visualization of the new algorithm is this:
+--------+
| |
+--------+=| S1 |========================
| | | |
| S0 | +--------+
| | +--------+
+--------+=========| |================
| S2 | +--------+
| | | |
+--------+ | S3 |
| |
+--------+
When focus is on S0, 'focus output right' will first match S1 (the
closest output which overlaps in the highlighted area), then S2, but not
S3 (since S3 does not overlap into the highlighted area).
fixes#669fixes#771
While it’s certainly better and clearer to specify it, we should do the
right thing when the unit is missing, just like CSS for example
(margin: 0; is okay, margin: 0px; too).
If there is a client with an urgency hint on another workspace and
switching to this workspace would cause the urgency to be reset (by
moving the focusing to the client), delay the reset by some time. This
gives the user the chance to see it.
This commit adds the possibility to configure the urgency delay timer
duration using the 'force_display_urgency_hint' directive. Also,
documentation and a testcase was added to allow for automated checks of
the intended behavior.
fixes#482
this implements both the "move container to workspace back_and_forth" command
and movements to the same workspace when auto_back_and_forth is set.
it includes documentation and test suite additions by michael.
it also simplifies the workspace_show_by_name function (making use of
workspace_get accepting NULL pointers).
Introducing a new event to subscribe called mode. It's fired up
when i3 changes binding mode (like switching from default to resize).
IPC guide adjusted also.
Functions such as fprintf() might be unsafe to use in a signal handler,
see http://stackoverflow.com/questions/3941271/#answer-3941563
By using ev_signal, libev will use a tiny signal handler which just
passes on the information and then calls (outside of the signal handler)
our callback function which can use fprintf() and other unsafe
functions.
fixes#803
Before commit 4976fa3350, setting the
layout of workspaces to something else than the default would just mess
up the parent container of the workspace (the content container).
After that commit, it would create an unnecessary split container when
you change the layout _before_ opening any containers. To avoid this, we
now store the layout (similar to how the 'workspace_layout'
configuration directive works) and apply it when the first container is
attached to the workspace.
Fixes#796
If the focused application is in fullscreen mode and 'scratchpad show'
is executed, toggle the fullscreen mode before showing the scratchpad
application. Otherwise, the scratchpad app would not be visible anyways
but focus would be stolen.
fixes#613
The problem was that scratchpad_move() didn’t check whether the source
workspace was focused. Therefore, 'move scratchpad' only worked reliably
interactively , but not when used with criteria.
For the following binding:
# Simulate ctrl+v upon pressing $mod+x
bindsym --release $mod+x exec --no-startup-id xdotool key --clearmodifiers ctrl+v
you can now use either:
1. press $mod, press x, release x, release $mod
2. press $mod, press x, release $mod, release x
fixes#485
The implementation is naive because the user has to generate exactly the
event he specified. That is, if you use this binding:
bindsym --release $mod+x exec import /tmp/latest-screenshot.png
Then it will only be triggered if you hit $mod, hit x, release x,
release $mod. It will not be triggered if you hit $mod, hit x, release
$mod, release x. The reason is that the KeyRelease event in the latter
case will not have the modifier in its flags, so it doesn’t match the
configured binding.
In tabbed mode, the available width (say 1280) is divided by the amount
of child containers (say 3). Before this commit, we just truncated the
result and would end up with 426 + 426 + 426 = 1278 pixels that we
render to. Now we render a bit too much, but that’ll at least not give
us graphics corruption on any side :).
fixes#791
When the workspace layout (formerly orientation) was forced to change
due to a move command, the split container we created was not marked as
split = true, which caused tree_flatten() to errnously kill the contents
of it and thus one window ended up unmanaged.
Also, the logic in tree_flatten() was inverted due to commit de94f6da.
fixes#790
This changes the fact that Firefox would not be launched on the correct
workspace because it marked the startup sequence as completed *before*
actually mapping all of its windows.
To test this, go to workspace 3 and run this command in a terminal:
i3-msg 'exec iceweasel; workspace 4'
That will make i3 start iceweasel (and create a proper startup
notification context for it), then immediately switch to workspace 4
(before iceweasel could possibly start).
The iceweasel window(s) should appear on workspace 3.
Basically, this is the same fix as commit 914ca6cf :-/. Once again, we
called exit() instead of _exit(), but this time it lead to a kill(0,
SIGTERM), effectively killing all processes in the i3 process group,
including i3 itself. The cause for the kill(0) is that nagbar_pid is set
to 0 by fork(), signaling we’re in the child process. The cleanup
handler only checks for nagbar_pid being -1 as a special value, however.
Previously, in case 'layout stacked' (for example) had been called
interactively, con_set_layout would be called with focused->parent,
while with for_window, it’d be called on the actual matching container.
This difference in behavior was the cause for the inability to use
'for_window [class="XTerm"] layout tabbed', which now works \o/, but
more on that below.
The change also allows us to handle the case of the user selecting a
CT_WORKSPACE container properly, that is, by using the special case and
creating a new split container on the workspace which gets all the
contents, but a new layout.
Now, before you are enthusiastic about the change and try to use
for_window magic in your config file, keep in mind: The 'layout' command
acts on the parent split container. That is, when using a line such as
this one:
for_window [class="XTerm"] layout tabbed
…and opening an XTerm when on a workspace with one single other window,
the whole workspace will be set tabbed (just as previously when you
opened an XTerm and sent 'layout tabbed' manually).
Therefore, to open XTerm in its own tabbed split container, you need to
split before:
for_window [class="XTerm"] split v, layout tabbed
The comma here is important! It says that the second command should not
be treated as an entirely unrelated command, but it should also relate
the matching window (while it does work with a ';', that is prone to
race-conditions and should be avoided).
fixes#358
When you have a tabbed container which has had more than one container
but currently has precisely one container, there was a bit of flickering
when switching workspaces occasionally. This commit fixes it by properly
setting the height of the deco_rect (and thus the X11 window) to not
make the old window contents show up for a minimum period of time.
fixes#777
This fixes a compatibility issue with gnome-terminal and xfce’s
terminal, where fullscreening would lead to moving the window and not
displaying the contents properly.
fixes#788
When resizing floating windows, changing the height was not correctly
handled. This commit fixes that and adds testcases for shrinking and
growing the width and height of floating windows.
To automagically do the right thing when rotating monitors with regards
to splith/splitv layout (depending on width/height of the monitor), we
change the orientation of existing workspaces and the first child.
If that first child happens to be a stacked/tabbed con, we cannot change
the layout unconditionally (previously, the orientation was not in the
layout, so we never noticed this problem).
fixes#768
The latter is actually wrong. For example, when running i3
--moreversion, it will print $(pwd)/i3 instead of $(which i3). In my
previous tests, this coincidentally was the same.
This changes the SHM log format, it doesn’t use 0-bytes to separate
entries anymore. Instead of using lots of printf() calls in i3-dump-log,
we now do precisely one big write().
So, to be clear: i3-dump-log and i3 both need to be upgraded.
Mismatching versions will lead to garbage output (no crashes of i3, just
garbage output).
The -f flag uses an inter-process pthread_cond_t in the shared memory
header to broadcast the arrival of new messages to all i3-dump-log
processes. This internally uses futexes and thus doesn’t even mean a
kernel call in most cases. inter-process pthread_cond_ts require NPTL
(the Native Posix Thread Library, introduce in Linux 2.6).
From the source:
When starting i3 initially (and after each change to the connected
outputs), this function fixes the resolution of the __i3
pseudo-output. When that resolution is not set to a function which
shares a common divisor with every active output’s resolution,
floating point calculation errors will lead to the scratchpad window
moving when shown repeatedly.
fixes#632
Since we advertise _NET_ACTIVE_WINDOW support (but only set the
corresponding atom currently), it makes sense to also support the
ClientMessage. Apps such as Gajim use it to set focus to the roster
window when clicking on the tray icon for example.
fixes#767
Compilers store the path with which they were called in the debug
symbols. Therefore, this will make backtraces show something like
../i3-4.2/src/main.c instead of src/main.c.
See also http://stackoverflow.com/questions/6473561/
before:
$ time CC=clang make -j16
CC=clang make -j16 6,04s user 0,86s system 468% cpu 1,471 total
CC=clang make -j16 6,05s user 0,87s system 468% cpu 1,477 total
CC=clang make -j16 6,15s user 0,86s system 464% cpu 1,510 total
CC=clang make -j16 6,05s user 0,93s system 467% cpu 1,493 total
CC=clang make -j16 6,10s user 0,84s system 461% cpu 1,507 total
$ time CC=gcc make -j16
CC=gcc make -j16 9,91s user 1,43s system 508% cpu 2,231 total
CC=gcc make -j16 10,02s user 1,37s system 500% cpu 2,275 total
CC=gcc make -j16 9,80s user 1,60s system 507% cpu 2,245 total
CC=gcc make -j16 10,02s user 1,44s system 506% cpu 2,264 total
CC=gcc make -j16 9,99s user 1,45s system 505% cpu 2,261 total
after:
$ time CC=clang make -j16
CC=clang make -j16 3,41s user 0,83s system 375% cpu 1,131 total
CC=clang make -j16 3,29s user 0,90s system 373% cpu 1,122 total
CC=clang make -j16 3,35s user 0,77s system 369% cpu 1,116 total
CC=clang make -j16 3,36s user 0,78s system 374% cpu 1,105 total
CC=clang make -j16 3,46s user 0,75s system 373% cpu 1,126 total
$ time CC=gcc make -j16
CC=gcc make -j16 10,74s user 1,44s system 494% cpu 2,462 total
CC=gcc make -j16 10,68s user 1,54s system 497% cpu 2,453 total
CC=gcc make -j16 10,60s user 1,60s system 488% cpu 2,499 total
CC=gcc make -j16 10,63s user 1,51s system 485% cpu 2,502 total
CC=gcc make -j16 10,70s user 1,51s system 497% cpu 2,453 total
Therefore, we enable pre-compiled headers only when CC=clang.
This is useful for third-party scripts which require certain features
and want to error out cleanly when they are run with an old i3 version.
Additionally, i3 --version might be different from what’s actually
running (an old version of the binary), so i3-msg -t get_version will be
the best way to figure out the i3 version you are actually running from
this commit on.
With this commit, the "default" layout is replaced by the splith and
splitv layouts. splith is equivalent to default with orientation
horizontal and splitv is equivalent to default with orientation
vertical.
The "split h" and "split v" commands continue to work as before, they
split the current container and you will end up in a split container
with layout splith (after "split h") or splitv (after "split v").
To change a splith container into a splitv container, use either "layout
splitv" or "layout toggle split". The latter command is used in the
default config as mod+l (previously "layout default"). In case you have
"layout default" in your config file, it is recommended to just replace
it by "layout toggle split", which will work as "layout default" did
before when pressing it once, but toggle between horizontal/vertical
when pressing it repeatedly.
The rationale behind this commit is that it’s cleaner to have all
parameters that influence how windows are rendered in the layout itself
rather than having a special parameter in combination with only one
layout. This enables us to change existing split containers in all cases
without breaking existing features (see ticket #464). Also, users should
feel more confident about whether they are actually splitting or just
changing an existing split container now.
As a nice side-effect, this commit brings back the "layout toggle"
feature we once had in i3 version 3 (see the userguide).
AFAIK, it is safe to use in-place restart to upgrade into versions
after this commit (switching to an older version will break your layout,
though).
Fixes#464
e.g. pressing Mod1+x when having the following in your configfile:
bindsym Mod1+x some invalid command
will lead to an i3-nagbar instance popping up, offering you to view the
error log (which will contain parser errors from this commit on).
This workaround is necessary for terminal emulators which parse -e in a
different way: some accept a list of arguments (-e command arg1 arg2 …),
some accept only one argument (-e "command arg1 arg2 …"). Therefore, we
just create a script and pass that as the one and only argument.
CPPFLGES, CFLAGS and LDFLAGS should be user variables
We now provide default flags but use I3_*FLAGS flags for our own needed
flags
Also reoder lib flags a bit
In certain situations (when you have a h-split within a h-split) you
couldn’t properly resize previously. This commit makes the resize
command properly traverse up the containers.
fixes#754
This fixes a race condition when running the tests. I think that the X11
server has more time to clean up the resources when we do an explicit
disconnect. The symptom I was seeing was that sometimes, i3 couldn’t
become the window manager on one of the Xdummy instances.
Depending on the memory layout, it could happen that bind->command was
exchanged with something else while the parser still accessed it.
Therefore, we now copy the command and let the parser use that copy.
When moving window from other (not current) workspace to another
workspace with criteria we should stay on current workspace.
And we should exit early when criteria was specified but didn't
match any window.
This is now restricted according to the already defined fullscreen
focus constraints. Test case 157 was removed, as we don't prevent
level up/down in fullscreen anymore. Those commands are properly
tested in fullscreen by test case 156.
Fixes: #612
Basically, a focus change can't escape a fullscreen container. The
only exception is per-output fullscreen containers, as you should
be able to focus a container in a different workspace in this case.
This is an improvement on 4eab046e, now considering the difference
between global and per-output fullscreen and taking the tree
structure into account to determine what escaping the fullscreen
container means. It only affects targeted focus commands in the
form "for_window [...] focus", but it lays the foundation for
forthcoming fixes to all other focus commands.
If the target is in a different workspace, there's no reason why
we wouldn't allow the user to focus it. We already allow this when
focusing a workspace, for example.
calling workspace by number now also checks for switching back and forth
and creates a new workspace if no workspace starting with that number is
found
also removed the obsolete tree_render() in favor of setting
cmd_output->needs_tree_render to true
When calculating coordinates we should multiply at first otherwise
we lose precision when i3 is compiled without sse2 support.
The following code prints "Res1: 348 Res2: 349" when compiled with
-O0 -mno-sse2 and "Res1: 349 Res2: 349" with -O0 -msee2.
Note that -msse2 is default flag on 64bit OSes.
int main() {
double a = 349.0 / 768;
double b = 349.0 * 768;
int res1 = a * 768;
int res2 = b / 768;
printf("Res1: %d Res2: %d\n", res1, res2);
return 0;
}
Thanks guys for helping me to hunt down this one.
See also:
http://article.gmane.org/gmane.linux.kernel/1268792
The C compiler will handle (void) as "no arguments" and () as "variadic
function" (equivalent to (...)) which might lead to subtle errors, such
as the one which was fixed with commit 0ea64ae4.
This fixes focus problems with Eclipse. Apparently, Eclipse waits for getting
notified about the focus, and since it used non-managed windows, i3 didn’t care
to update the focus.
Fixes: #621, #675
Fixes: #668
Calling tree_close with dont_kill_parent=true will avoid it from closing the
workspace if it’s empty (and it’s temporarily empty, because 'floating disable'
detaches, then re-attaches the window).
Initially I thought using the second precision time() function is good enough,
but to make t/113-urgent.t considerably faster (>2s vs. 0.08s), we put in a
little more effort and use gettimeofday. Otherwise, this test blocks the whole
testsuite from completing much faster on modern machines :).
This change has two implications:
1) tree_render() will now be called precisely once for input which consists of
multiple commands (like "focus left; focus right"). Also, the caller of
parse_command() has to call it. This makes us able to fix tickets such as
ticket #608 (where multiple tree_render() calls are noticable).
2) The output of a command is now a JSON array of return values of the
individual subcommands. In the case of "focus left; focus right", this is:
[{"success":true}, {"success":true}]
While this is incompatible with what i3 returned before, the return value of
commands was undocumented and therefore not subject to our API stability.
You need to specify the --enable-32bit-visual flag when starting i3. This is
done because everything feels sluggish on my system when using a 32 bit visual
instead of a 24 bit visual. Fast > fancy.
Fixes floating containers seemingly showing up in the wrong
workspace after moving workspaces containing floating containers.
We must *always* fix the coordinates of floating containers when
moving workspaces across outputs. That's because the coordinates
of floating containers are *not* relative to the workspaces.
Currently it supports the following options:
"oldest": match the first window that triggered an urgent event
"latest": match the last window that triggered an urgent event
If you had workspace 1, 2, 3, 4 on LVDS1 and you enabled HDMI2 (where workspace
1 to workspace 5 are assigned to HDMI2), i3 would look for a new workspace for
LVDS1 (since all workspaces were moved), create workspace 5, move that over due
to assignment and then create workspace 6. Effectively, you would end up with
an empty workspace 5.
Michael Stapelberg