4622cde7b7
Merge branch 'master' into next
2012-08-22 16:02:02 +02:00
1089b0b201
fix resizing floating windows by height
...
When resizing floating windows, changing the height was not correctly
handled. This commit fixes that and adds testcases for shrinking and
growing the width and height of floating windows.
2012-08-22 16:01:40 +02:00
68a23b9577
Bugfix: only honor _NET_ACTIVE_WINDOW for visible windows (+test) (Thanks Tucos)
...
fixes #774
2012-08-12 16:08:53 +02:00
dd743f3b55
add testcase for previous bugfix (floating window size)
2012-08-12 00:36:44 +02:00
6ba0944430
scratchpad: fix moving scratchpad window
...
From the source:
When starting i3 initially (and after each change to the connected
outputs), this function fixes the resolution of the __i3
pseudo-output. When that resolution is not set to a function which
shares a common divisor with every active output’s resolution,
floating point calculation errors will lead to the scratchpad window
moving when shown repeatedly.
fixes #632
2012-08-08 18:45:40 +02:00
78f5f2204d
ipc: implement GET_VERSION to find out the i3 version
...
This is useful for third-party scripts which require certain features
and want to error out cleanly when they are run with an old i3 version.
Additionally, i3 --version might be different from what’s actually
running (an old version of the binary), so i3-msg -t get_version will be
the best way to figure out the i3 version you are actually running from
this commit on.
2012-08-05 14:30:05 +02:00
2f22fae119
i3-migrate-config-to-v4: use layout toggle split (Thanks eeemsi)
2012-08-04 12:46:37 +02:00
de94f6da1a
Introduce splith/splitv layouts, remove orientation
...
With this commit, the "default" layout is replaced by the splith and
splitv layouts. splith is equivalent to default with orientation
horizontal and splitv is equivalent to default with orientation
vertical.
The "split h" and "split v" commands continue to work as before, they
split the current container and you will end up in a split container
with layout splith (after "split h") or splitv (after "split v").
To change a splith container into a splitv container, use either "layout
splitv" or "layout toggle split". The latter command is used in the
default config as mod+l (previously "layout default"). In case you have
"layout default" in your config file, it is recommended to just replace
it by "layout toggle split", which will work as "layout default" did
before when pressing it once, but toggle between horizontal/vertical
when pressing it repeatedly.
The rationale behind this commit is that it’s cleaner to have all
parameters that influence how windows are rendered in the layout itself
rather than having a special parameter in combination with only one
layout. This enables us to change existing split containers in all cases
without breaking existing features (see ticket #464 ). Also, users should
feel more confident about whether they are actually splitting or just
changing an existing split container now.
As a nice side-effect, this commit brings back the "layout toggle"
feature we once had in i3 version 3 (see the userguide).
AFAIK, it is safe to use in-place restart to upgrade into versions
after this commit (switching to an older version will break your layout,
though).
Fixes #464
2012-08-04 03:13:24 +02:00
cc7f16007a
Display i3-nagbar when commands lead to an error
...
e.g. pressing Mod1+x when having the following in your configfile:
bindsym Mod1+x some invalid command
will lead to an i3-nagbar instance popping up, offering you to view the
error log (which will contain parser errors from this commit on).
2012-08-02 17:45:09 +02:00
ac7278eb1a
resizing: traverse containers up properly (+test) (Thanks oblique)
...
In certain situations (when you have a h-split within a h-split) you
couldn’t properly resize previously. This commit makes the resize
command properly traverse up the containers.
fixes #754
2012-07-22 21:37:26 +02:00
a65394646c
tests: t/504: ensure cursor position
...
Otherwise, the cursor might be at (1025, 0) due to previous testcases
and we wouldn’t start up on the correct workspace.
2012-06-29 23:21:32 +02:00
f0f45aa84d
tests: t/166-assign.t: use wait_for_window
...
While it’s generally intended that wait_for_window is not called within
this testcase, in the first test instruction it was a mistake. The
window in fact gets mapped and therefore we should call wait_for_window.
2012-06-29 23:20:46 +02:00
daee3218c9
tests: make t/166-assign.t more robust
...
…by using the new syntax which will not trigger i3-nagbar. Checking for
i3-nagbar is inherently prone to race conditions since i3-nagbar does
not communicate in any way that it’s there.
2012-06-29 21:28:10 +02:00
19946ee14d
tests: make t/159-socketpath more robust
...
…by getting the socket path from i3 and then checking that it conforms
to what we expect. Previously we monitored /tmp, which can go wrong in
various ways, especially since i3’s directory within /tmp is not
predictable (by design).
2012-06-29 21:23:28 +02:00
a15fe0e332
Merge branch 'master' into next
2012-06-10 17:57:25 +02:00
f0b56c5e98
parser: reorder v/h/vertical/horizontal
...
This eliminates an error message upon split horizontal which did not
occur in older i3 versions. The command itself worked just fine.
2012-06-10 17:56:28 +02:00
2afecaf355
Add a new command 'move to workspace current'
...
Added a new command 'move to workspace current' which can be used
with criteria to move a window to the current workspace.
2012-06-03 19:42:56 +02:00
fffc53c246
Restrict "move to workspace" commands in fullscreen.
2012-06-03 16:24:53 +02:00
4452bfb942
Prevent moving out of fullscreen containers.
2012-06-03 16:24:53 +02:00
8bf4e9e059
Restrict directional focus in fullscreen.
...
This reuses the same fullscreen focus logic to ensure that focus
doesn't escape a fullscreen container.
2012-06-03 16:24:53 +02:00
250c260eaa
Allow focus child/parent when in fullscreen.
...
This is now restricted according to the already defined fullscreen
focus constraints. Test case 157 was removed, as we don't prevent
level up/down in fullscreen anymore. Those commands are properly
tested in fullscreen by test case 156.
Fixes : #612
2012-06-03 16:24:53 +02:00
da1e232757
Refined the fullscreen focus constraints.
...
Basically, a focus change can't escape a fullscreen container. The
only exception is per-output fullscreen containers, as you should
be able to focus a container in a different workspace in this case.
This is an improvement on 4eab046e
2012-06-03 16:24:53 +02:00
1103f94c34
Merge branch 'master' into next
2012-05-28 23:37:26 +02:00
485871ffdd
Get rid of references to level up/down.
...
In v4 syntax, that's focus parent/child.
2012-05-28 23:37:15 +02:00
ed957d60a7
Merge branch 'master' into next
2012-05-09 21:08:28 +02:00
4eab046e8f
Allow focus w/ target when in fs in some cases.
...
If the target is in a different workspace, there's no reason why
we wouldn't allow the user to focus it. We already allow this when
focusing a workspace, for example.
2012-05-09 21:08:19 +02:00
eab9f46c33
Merge branch 'master' into next
2012-05-09 20:39:26 +02:00
ec4dddb608
tests: add test to verify workspace_auto_back_and_forth works with 'workspace number'
2012-05-09 20:33:41 +02:00
82e0eaa315
tests: Check that 'workspace number <number>' opens a new workspace
2012-05-09 20:33:11 +02:00
8557b05a2c
t/141-resize.t: do not compare float values directly. use i3test.pm::cmp_float which compares using precision of 1e-6.
2012-05-05 19:15:43 +02:00
bbe607899c
Send proper error messages upon parser failures, use yajl for generating command replies
...
Fixes : #693
2012-05-02 22:01:50 +02:00
1bb165a29a
tests: warp the pointer to in multi-monitor tests to avoid flaky tests
2012-04-09 14:48:57 +02:00
983ba656fc
t/166-assign: wait until the window is definitely mapped
2012-04-09 14:48:25 +02:00
7210ab22d7
t/166-assign: remove unnecessary sleeps
2012-04-09 14:48:15 +02:00
0f10ccdf12
Implement fake-outputs option (cmdline, cfg) for multi-monitor testing
...
This kills the dependency on xdmx and makes the testsuite simpler
and more flexible (in the output sizes / configurations).
2012-04-09 14:28:36 +02:00
373b4ad74a
Implement 'rename workspace <old_name> to <new_name>'
2012-04-08 20:40:00 +02:00
ad513b4799
Implement 'move [container|window] to workspace number <number>'
2012-04-08 20:33:46 +02:00
72078c704e
Implement 'workspace number <number>' to switch to named workspaces
2012-04-08 19:17:46 +02:00
849e06f21e
Replace the old fullscreen container when requesting fullscreen
...
Fixes : #510
2012-04-08 17:53:37 +02:00
2d110c90e6
Implement resize <grow|shrink> <width|height>, use it in the default config
...
Fixes : #576
2012-04-08 16:00:15 +02:00
c0c2fd631b
add a testcase for the previous commit
2012-04-05 18:12:24 +02:00
f78f137ed0
Extends move command for floating windows
2012-03-25 11:06:49 +02:00
2abfb5a88b
Bugfix: Also clear the command parser’s stack upon invalid commands (Thanks helgikrs)
...
Fixes : #652
2012-03-21 17:20:07 +01:00
d085e88d02
t/158-wm_take_focus: use sync_with_i3 instead of a timeout
2012-02-21 14:37:55 +01:00
41400d8a16
t/164-kill-win-vs-client: get rid of sleep()s
2012-02-21 14:28:37 +01:00
bee1e90b1e
t/187-commands-parser: shave off a bit of time by consolidating calls
2012-02-21 14:22:26 +01:00
b21a675a9c
t/171-config-migrate: shave off a bit of time by consolidating migrate_config calls
2012-02-21 14:11:04 +01:00
06a9820b5f
t/166-assign: check for i3-nagbar in the process hierarchy instead of sleep(1)
2012-02-21 13:58:49 +01:00
7e05a0700a
tests: don’t wait for window map event in open_special
...
Since the window doesn’t get mapped at all in these tests (it’s assigned to an
invisible workspace), this saves us a timeout of 2 seconds :).
2012-02-21 13:40:53 +01:00
ab9ba6fcf9
Use gettimeofday() and struct timevals instead of time()
...
Initially I thought using the second precision time() function is good enough,
but to make t/113-urgent.t considerably faster (>2s vs. 0.08s), we put in a
little more effort and use gettimeofday. Otherwise, this test blocks the whole
testsuite from completing much faster on modern machines :).
2012-02-21 13:38:49 +01:00
a2d80c4ab9
tests: add a testcase for the floating size constraints
2012-02-16 18:43:47 +00:00
19f3f84d29
tests: add test for previous commit
2012-02-15 18:08:53 +00:00
6d0dcf06ef
tests: make t/504-move-workspace-to-output consistent with the previous commit
2012-02-15 18:02:02 +00:00
974e70459d
tests: add a test for the urgent= criteria
2012-02-14 22:47:40 +00:00
82247fd0ab
Bugfix: Correctly handle missing ending double quotes (+test) (Thanks mxf)
2012-02-10 19:49:38 +00:00
2f8d3d3390
Bugfix: Properly handle workspace names with double quotes (+test) (Thanks kvapen)
2012-02-07 22:50:27 +00:00
ed2bcc15e3
Merge branch 'master' into next
2012-02-07 17:42:58 -05:00
0fc459892e
Bugfix: Properly split when the current container is alone within a stacked/tabbed con (+test) (Thanks aksr)
...
Fixes : #630
2012-02-07 17:42:35 -05:00
4fe974408d
Merge branch 'master' into next
2012-02-07 17:41:36 -05:00
4f98bbf5ff
Bugfix: Obey workspace_layout when re-inserting floating containers (+test) (Thanks aksr)
...
The code wasn’t using con_attach and therefore didn’t obey workspace_layout.
Fixes : #631
2012-02-07 17:41:00 -05:00
efa1cada29
tests: Make i3 create its temporary files in /tmp/i3-testsuite
...
This behavior can be avoided by passing dont_create_temp_dir => 1 to
launch_with_config (or activate_i3).
This commit fixes t/159-socketpaths.t being flaky on non-systemd computers.
2012-02-07 17:38:45 -05:00
19dc92a9a5
new parser: correctly handle leading/trailing newlines (+test) (Thanks helgikrs)
2012-01-25 22:00:32 +00:00
318d4fdeef
make in-place restarts use socket activation, too (for faster/less flaky tests)
2012-01-21 23:03:09 +00:00
3b7f4d428e
Correctly restore focus after in-place restarts
...
Note: This change requires two in-place restarts when you are upgrading
in-place from an old version.
Fixes #611
2012-01-21 18:35:15 +00:00
fc27c19761
Merge branch 'master' into next
...
Conflicts:
testcases/t/005-floating.t
2012-01-21 14:22:29 +00:00
cb4c9b9d27
Bugfix: Position floating windows exactly where their geometry specified (Thanks B-Con)
...
Fixes #619
2012-01-21 14:20:55 +00:00
45b4d71a0b
handle the old bar color config syntax in a backwards-compatible way
2012-01-20 22:26:17 +00:00
31b7ec29fd
Re-implement bar borders (by Angelo Haller)
...
This re-introduces borders around the workspace buttons in i3bar.
No additional pixels will be consumed (you will not lose any space for your
windows).
2012-01-20 21:36:50 +00:00
a532f5ac39
Implement a new parser for commands. (+test)
...
On the rationale of using a custom parser instead of a lex/yacc one, see this
quote from src/commands_parser.c:
We use a hand-written parser instead of lex/yacc because our commands are
easy for humans, not for computers. Thus, it’s quite hard to specify a
context-free grammar for the commands. A PEG grammar would be easier, but
there’s downsides to every PEG parser generator I have come accross so far.
This parser is basically a state machine which looks for literals or strings
and can push either on a stack. After identifying a literal or string, it
will either transition to the current state, to a different state, or call a
function (like cmd_move()).
Special care has been taken that error messages are useful and the code is
well testable (when compiled with -DTEST_PARSER it will output to stdout
instead of actually calling any function).
During the migration phase (I plan to completely switch to this parser before
4.2 will be released), the new parser will parse every command you send to
i3 and save the resulting call stack. Then, the old parser will parse your
input and actually execute the commands. Afterwards, both call stacks will be
compared and any differences will be logged.
The new parser works with 100% of the test suite and produces identical call
stacks.
2012-01-14 21:29:57 +00:00
f81c89ac28
Refactor the code out of src/cmdparse.y to src/commands.c
...
This is the first step towards our new parser.
2012-01-14 16:59:52 +00:00
814695d8bb
Implement 'move workspace to output <output>'
...
Fixes : #541
2012-01-10 22:16:50 +00:00
a4a59a797f
tests: use open_window to avoid motion notifies which in turn trigger endless loops
...
Using 'open' will not create an X11 window (while open_window does), so we will
get spurious motion notify events when switching focus, leading to endless loops.
2012-01-10 22:16:09 +00:00
df9b338175
Introduce synonyms: 'move to workspace' and 'move container to workspace' and 'move window to workspace'
...
This makes the new 'move workspace to output' command much more clear
2012-01-10 22:16:09 +00:00
6585d289cf
add testcase for workspace next_on_output/prev_on_output
2012-01-08 16:33:16 +00:00
07d07719f0
add testcase for 'focus output'
2012-01-08 11:59:24 +00:00
470ee00012
Merge branch 'master' into next
2012-01-07 18:50:46 +00:00
d4238c778a
Bugfix: Open new windows in the correct place when assignments match (+test) (Thanks Don)
2012-01-07 18:50:00 +00:00
6345124049
Merge branch 'master' into next
...
Conflicts:
src/con.c
2012-01-07 18:21:12 +00:00
f78caf8c58
Bugfix: Don’t lose focus on fullscreen windows when another window gets moved to that workspace (+test) (Thanks rami)
...
Fixes : #606
2012-01-07 18:18:36 +00:00
0e1b1dd984
Bugfix: Correctly handle 'move scratchpad' on workspace level (+test) (Thanks mseed)
...
Fixes : #597
2012-01-07 17:36:30 +00:00
3254188cda
Bugfix: Show scratchpad on the correct output (+test)
...
Fixes : #596
2012-01-07 16:53:37 +00:00
ed37a63942
tests: add scratchpad test
2012-01-05 21:41:23 +00:00
91499ed2c7
properly serialize floating/scratchpad state when restarting
2012-01-05 21:41:20 +00:00
ec7ed75c01
tests: make t/143 actually verify floating windows are restored properly
2012-01-05 21:20:53 +00:00
dd9743b272
tests: Implement multi-monitor tests using Xdmx
2011-12-26 20:48:57 +01:00
08986a1798
Implement scratchpad functionality (see userguide)
2011-12-21 23:15:32 +00:00
622b94f176
Merge branch 'master' into next
2011-12-20 18:44:26 +00:00
d963018990
Bugfix: Don’t close workspace when there are still floating windows on it (Thanks noxxun) (+test)
...
Fixes : #595
2011-12-20 18:44:15 +00:00
1f2c9306a2
Merge branch 'master' into next
...
Conflicts:
testcases/t/159-socketpaths.t
2011-12-18 18:02:08 +00:00
c21172a6f6
Create a secure temp path instead of a predictable one (Thanks Han)
...
With this commit, i3 will now use either $XDG_RUNTIME_DIR/i3 (XDG_RUNTIME_DIR
is only writable by the user, so this is not a problem) or a secure temporary
location in /tmp, following the pattern /tmp/i3-<user>.XXXXXX
2011-12-18 17:59:31 +00:00
2ba09f5419
Merge branch 'master' into next
2011-12-18 15:19:09 +00:00
ec28f3b982
Bugfix: Fix floating resize for floating split containers (+test)
...
Fixes : #588
2011-12-18 15:18:20 +00:00
a930994dc9
Merge branch 'master' into next
2011-12-17 17:16:39 +00:00
75c57c4eef
Bugfix: Ignore ConfigureRequests with out-of-bound coordinates (+test)
...
JDownloader seems to use these for its captcha popups when focus is not on the
same workspace, for some weird reason.
2011-12-17 17:15:52 +00:00
db174234ce
Merge branch 'master' into next
...
Conflicts:
debian/changelog
2011-12-17 15:28:51 +00:00
1ff321bc3f
Bugfix: Disallow focusing other windows when in fullscreen mode (Thanks aksr)
...
Fixes : #579
2011-12-17 15:28:17 +00:00
ef224cdb98
Merge branch 'master' into next
...
Conflicts:
testcases/t/173-get-marks.t
2011-12-17 14:22:57 +00:00
b46ab649f5
Bugfix: Fix setting the same mark repeatedly on different windows (+test)
...
Fixes : #582
2011-12-17 14:22:23 +00:00
da8d0baa74
tests: add test for previous commit
2011-12-17 11:18:43 +00:00
8349190e09
testcases: always start i3 through i3test::launch_with_config
...
this will pave the way to just call BAIL_OUT and stop the currently
running testfile if i3 died for whatever reason.
2011-12-04 14:14:20 +01:00
0f9fbcbd25
Merge branch 'master' into next
2011-11-29 22:37:11 +00:00
626e3efb48
Bugfix: Fix 'resize' command in nested containers (Thanks mseed)
...
Fixes : #559
2011-11-29 22:36:40 +00:00
f5dce848b8
Merge branch 'master' into next
2011-11-26 22:18:01 +00:00
31acb91d90
Bugfix: Fix crash on '[class="i3bar"] focus' (+test) (Thanks f8l)
...
Fixes #575
2011-11-26 22:17:34 +00:00
5c59c0296c
tests: add test for ticket #561 (floating window size when changing border)
2011-11-26 21:20:00 +00:00
475dc3c532
testcases: use open_window everywhere
2011-11-23 20:33:44 +00:00
c2229b905a
testcases: replace sleep with sync_with_i3 where appropiate
2011-11-23 20:33:44 +00:00
33e9c29022
testcases: t/144-*: use open_window instead of launching urxvt
2011-11-23 20:33:44 +00:00
6bf13b413e
testcases: t/116-*: reinvent ignore() from Test::Deep
2011-11-23 00:03:09 +00:00
8d83697cc2
testcases: use Test::More is_deeply, don't depend on Test::Deep
2011-11-23 00:02:57 +00:00
3a9d94bba4
testcases: don't sync_with_i3() before $x->input_focus
...
since input_focus calls it anyways
2011-11-23 00:02:54 +00:00
0702f1fb7b
testcases: drop sync_with_i3()s $x parameter, use global
2011-11-23 00:02:50 +00:00
293517fb2e
testcases: drop open_floating_window()s $x parameter, use global
2011-11-23 00:02:47 +00:00
fce7570f96
testcases: drop open_window()s $x parameter, use global one instead
2011-11-21 23:51:04 +00:00
e9acd36ce4
t/005-floating.t: fix potentional race condition
2011-11-21 23:51:01 +00:00
da403b3667
testcases: use $x in wait_for_(un)map change to wait_for_(un)map($win)
...
wait_for_unmap currently ignores its $window parameter, since
X11::XCB doesn't provide $event->{window} for unmap events yet.
2011-11-21 23:50:58 +00:00
ea2aba4319
testcases: undo 0f386a96 t/144-regress-floating-resize.t
...
wait_for_map can't be used, since we don't set structure_notify
on the urxvts windows
2011-11-21 23:50:52 +00:00
db6de84d0b
testcases: use global $x in wait_for_event, drop $x parameter
2011-11-21 23:50:48 +00:00
30ea33decb
testcases: let i3test.pm export $x, adapt testcases
2011-11-21 23:50:43 +00:00
1b1d7941ec
testcases: correctly enable lexical pragmata
...
eval 'package foo; use strict;' enables strict within eval, it does
not leak into the surrounding scope.
Also fix various warnings/compile errors found due to now enabled
strict and warnings.
2011-11-21 23:50:39 +00:00
e72899efb6
testcases: move i3test::X11 from 170-force_focus_wrapping.t into i3test.pm
2011-11-21 23:50:33 +00:00
0f386a96e7
testcases: fix race conditions in various tests
2011-11-21 19:21:14 +00:00
8a9b093bc3
tests: replace left-over move before/after commands (Thanks mxf)
2011-11-21 18:54:20 +00:00
2783aa9fc9
tests: add t/180-fd-leaks to ensure i3 does not leak fds on exec
2011-11-20 10:52:21 +00:00
60bfc3a600
Bugfix: Correctly handle --no-startup-id with quoted exec commands (Thanks aksr)
...
Parser changes shortly before a release. What could possibly go wrong.
2011-11-11 00:28:04 +00:00
e73538a56f
t/154-regress-multiple-dock: s/next v/focus right
2011-11-10 18:43:03 +00:00
bebd2fceb6
Bugfix: Correctly return to initial state after prev/next/back_and_forth (Thanks Brian)
...
Fixes : #552
2011-11-10 18:42:24 +00:00
50d14718f4
fix t/120-multiple-cmds: open a window before moving
2011-10-27 23:30:29 +01:00
edfa9febae
extend t/124-move.t to test move for floating containers
2011-10-27 21:46:01 +01:00
ca0c2a46e4
t/124-move.t: re-activate test for useless move commands
2011-10-27 21:22:41 +01:00
e710477a07
Bugfix: properly handle comments in colors {} blocks of bar config (+test) (Thanks fernandotcl)
2011-10-25 22:31:57 +01:00
91d589b176
tests: extend t/175-startup-notification to test the --no-startup-id flag
2011-10-25 22:21:37 +01:00
d490bae8a2
Close empty workspaces if they're not visible.
...
Previously, we'd only close an empty workspace when we moved away
from it. Now we also close it when the last client exits, as long
as that workspace is not visible anymore.
2011-10-24 00:12:14 +01:00
29f9f8c090
Fix tests: s/i3bar/bar {/ and hash prefix for color codes in GET_BAR_CONFIG
2011-10-23 21:51:43 +01:00
3a99c914e0
tests: default bar mode changed
2011-10-21 23:00:38 +01:00
ad0f13a0a9
Clean bars before reloading the config (+test)
...
While the configuration gets updated in i3, the i3bar processes will not pick
up these changes. We have to think about a good way to do that.
2011-10-20 18:47:09 +01:00
15bface10d
Create different IDs for each bar (+test)
2011-10-19 19:57:39 +01:00
d9f3a31cb7
tests: add a test to check that bar configs are parsed correctly
2011-10-18 22:15:48 +01:00
82ec0169cb
tests: add t/176-workspace-baf for the workspace back_and_forth feature
2011-10-17 23:34:29 +01:00
fce422d99e
i3test.pm: use strict; use warnings; and fix related bugs
2011-10-12 22:21:57 +01:00
71a3da1ef3
t/175-startup-notification: don’t wait for i3 mapping the window
...
It is on a different workspace and will therefore not get mapped.
Syncing is enough.
2011-10-10 16:00:34 +01:00
6ac098a45e
support _NET_STARTUP_ID on the client leader window
...
(necessary for GIMP, geeqie, …)
2011-10-10 15:54:17 +01:00
7750382b89
test: set the _NET_STARTUP_ID before mapping the window
2011-10-10 15:54:17 +01:00
198f16ece9
add testcase for the startup notification protocol
2011-10-10 15:54:17 +01:00
ae1ab9eb27
tests: rename files (00x-*.t is basic stuff, >=100-*.t are tests using IPC)
2011-10-08 14:38:50 +01:00
3136573a70
tests: eliminate List::MoreUtils
2011-10-05 23:21:36 +01:00
b9cd9132d0
tests: remove unused Proc::Background
2011-10-05 20:48:34 +01:00
bd33c09845
tests: move i3test.pm from t/lib to lib/
2011-10-04 23:39:36 +01:00
57484553e6
tests: use a lot higher timeouts
...
This makes the tests more robust on a machine which is loaded.
Also, it makes the tests run (significantly) longer if anything goes wrong.
2011-10-04 23:36:57 +01:00
359717970d
tests: don’t overwrite $timeout, kill timer when done
2011-10-04 23:36:43 +01:00
4e1d50fa3a
tests: Convert all testcases to use the new launch_with_config API
...
It now returns a pid directly, not a Proc::Background object.
2011-10-04 23:34:23 +01:00
8d9b4c3c04
tests: launch_with_config: use socket activation
2011-10-04 23:33:38 +01:00
32ea923721
add a test for the 'move workspace next/prev' command
2011-10-02 22:18:21 +01:00
683bfa58d5
tests: Use AnyEvent::I3’s get_marks (requires AE::I3 >=0.08)
...
We also don’t bother with timeouts anymore. It’s expected to run the tests with
a sufficiently recent version of i3. The tests will just hang if it doesn’t
work.
2011-09-26 19:36:27 +01:00
1675499f15
docs/testsuite: a few corrections by fernandotcl
2011-09-25 14:23:47 +01:00
1eb011aae1
tests: make sure to leave no tempfiles behind
2011-09-24 16:28:21 +01:00
10a9d2a439
tests: Bugfix: 11-goto.t: use mktemp for generating a random mark, not base64
...
The base64 string could contain / and + which is treated specially since we
implemented PCRE support :)
2011-09-24 15:56:43 +01:00
761dac5514
tests: lib/i3test: Use //= instead of unless exists $args{key} (Thanks mxf)
2011-09-24 15:44:42 +01:00
378611c11c
tests: refactor t/58-wm_take_focus to use wait_for_event
2011-09-24 15:38:31 +01:00
de5286da59
tests: lib/i3test: Remove open_standard_window, introduce open_window
...
open_window has a better API than open_standard_window. It uses named
parameters and supplies default values for everything you don’t specify. This
way, you can use every feature which X11::XCB::Window supports.
2011-09-24 15:11:37 +01:00
4da5b7e784
tests: use wait_for_{map,unmap} to eliminate more sleep()s
2011-09-24 13:08:02 +01:00
4821b13cae
tests: lib/i3test: provide wait_for_map and wait_for_unmap
...
These functions should be used instead of calling wait_for_event directly when
waiting for MAP_NOTIFY or UNMAP_NOTIFY
2011-09-24 13:07:05 +01:00
38a9eabff1
tests: implement sync_with_i3 and use it instead of sleep()
...
Also use open_standard_window() in a few more places where appropriate
2011-09-24 11:15:08 +01:00
3167e9ad2d
lib/i3test.pm: reformat exports list
2011-09-22 23:13:13 +01:00
83560c85d8
lib/i3test.pm: Don’t sleep(0.25), but wait until the window was mapped
...
This makes it faster and less racey
2011-09-22 23:13:12 +01:00
5542af316f
t/65-for_window: add tests for window_role
2011-09-18 16:05:54 +01:00
99168a84a9
tests: also make launch_with_config() log to LOGPATH
2011-09-18 15:35:04 +01:00
c8c95030ad
tests: extend t/35-floating-focus to use focus left/right on floating windows
2011-09-17 19:29:23 +01:00
7a38d8ac56
Merge branch 'master' into next
2011-09-17 14:13:05 +01:00
7a43af04af
Tests: fix floating size, add a test to check floating size when starting in tiling
2011-09-17 14:12:16 +01:00
717ae819c5
Merge branch 'master' into next
2011-09-11 22:52:44 +01:00
2a215fd7e2
Bugfix: Ignore for_window commands with empty (invalid) criteria (+test) (Thanks aksr)
2011-09-11 22:52:33 +01:00
d82698efa7
make the old assign syntax trigger an i3-nagbar warning (it’s deprecated), adjust test
2011-09-11 22:01:36 +01:00
b3e1fb1f3b
Make the old 'assign' case-insensitive again (+test) (Thanks aksr)
2011-09-11 21:16:45 +01:00
c1c1730516
pcre: enable UCP, UTF-8 (if available), extend t/19-match
2011-09-11 11:40:51 +01:00
8e04867e51
extend t/19-match to also test regular expressions
2011-09-10 23:52:39 +01:00
bf4d166330
extend t/17-workspace.t to check if the numbers are assigned correctly
2011-09-05 22:24:28 +02:00
f0a0236b7b
Merge branch 'master' into next
2011-08-28 17:02:19 +02:00
96b219f27b
migrate-config: use \s, be a bit more whitespace tolerant (+test) (Thanks sbedivere)
...
Fixes : #457
2011-08-28 17:01:59 +02:00
16188af8bf
Merge branch 'master' into next
2011-08-28 15:47:35 +02:00
0b0a2dad51
t/66-assign: check if i3 crashes when assigning a dock window to floating
2011-08-28 15:43:51 +02:00
8114ecda47
Merge branch 'master' into next
2011-08-27 13:47:57 +02:00
e97a7e34f7
Bugfix: Re-implement reconfiguring height of dock windows (+test) (Thanks thomasba)
2011-08-27 13:47:10 +02:00
6c42a179ec
Merge branch 'master' into next
2011-08-27 13:03:20 +02:00
4c01dbd726
Bugfix: Don’t always focus floating windows (fixes focus stealing with assignments) (+test) (Thanks aksr)
2011-08-27 13:02:44 +02:00
ff85023b08
Merge branch 'master' into next
2011-08-24 15:14:53 +02:00
0d35feb71b
Bugfix: Make the 'resize' command work inside tabbed/stacked cons (+test) (Thanks sbedivere)
...
Fixes #461
2011-08-24 15:14:04 +02:00
642a745004
Merge branch 'master' into next
2011-08-24 00:57:36 +02:00
b8a656bca7
Add test for the 'focus mode_toggle' issue ( #487 )
2011-08-24 00:57:25 +02:00
22e30061f3
Merge branch 'master' into next
2011-08-17 16:37:09 +02:00
f172359ba5
Bugfix: Don’t change focus when assigned windows start on invisible workspaces (+test) (Thanks ioflag)
...
Fixes #468
2011-08-17 16:36:19 +02:00
f8d834c62d
Merge branch 'master' into next
2011-08-09 09:47:10 +02:00
98cc37e223
swap up/down, also modify the testcase
2011-08-09 09:46:02 +02:00
74687fa97c
tests: add t/74-border-config which checks new_window and new_float
2011-08-09 09:29:59 +02:00
dab3a0b85a
tests: add testcase for the GET_MARKS ipc request
2011-08-09 08:19:48 +02:00
51119c75c1
extend t/65-for_window to check for the 'instance' criterion
2011-08-04 20:11:01 +02:00
3ef7e3cee4
t/41-resize: also verify resize for floating windows
2011-08-03 14:48:33 +02:00
dcba8024de
also handle quoted workspace names, extend t/72 for that
2011-08-03 03:33:12 +02:00
72d2b2c9bd
add testcase to check if i3 starts on the first named workspace (ticket #449 )
2011-08-03 02:56:24 +02:00
003f7043c5
t/70-force-focus-wrapping: use launch_with_config
2011-08-03 02:12:29 +02:00
7956289c2b
t/67-workspace_layout: use launch_with_config
2011-08-03 02:04:52 +02:00
8734534b5c
t/66-assign: use launch_with_config
2011-08-03 02:03:26 +02:00
506d8797b2
tests: implement i3test::launch_with_config, use it in t/65-for_window
2011-08-03 00:03:13 +02:00
b57e8570c9
t/65-for_window: add a testcase for multiple criteria
2011-08-02 19:46:10 +02:00
56499d8374
tests: make t/65-for-window.t use separate i3 instances
2011-08-02 19:21:09 +02:00
3204caa98d
i3-migrate-config-to-v4: drop the .pl suffix
...
As lintian (a Debian package checker) mentions, it is more clever to install it
without the extension, since the implementation language might change.
2011-07-31 23:11:05 +02:00
eea804cd94
migrate-config: convert old 'with container' commands to 'focus parent; $command' (+test) (Thanks Marcus)
2011-07-27 14:36:22 +02:00
2b940296a8
tests: t/17-workspace.t: keep workspace 1 open
...
When not running i3 in a terminal from workspace 1, this would fail otherwise
2011-07-27 14:35:40 +02:00
49ea805905
tests: get the socket path from the X11 atom I3_SOCKET_PATH
...
The hard-coded socket paths are not useful when running the test suite in
parallel.
2011-07-25 13:35:56 +02:00
34eb9b2664
ipc: make 'focused' a bool
2011-07-24 15:00:09 +02:00
b09bb0fc2a
ipc: make 'urgent' a bool
2011-07-24 14:54:30 +02:00
36fde6dbe1
ipc: send 'percent': null when percent is not relevant for the container
2011-07-24 14:47:28 +02:00
feaa161d2c
testcases: explicitly mark the (short) config files as v4
...
i3 won’t call i3-migrate-config and thus won’t add a call to i3bar this way.
It’s not necessary and can interfere with some tests sometimes.
2011-07-15 01:37:54 +02:00
e117a8a77f
migrate-config: mode foo → mode "foo" (+test) (Thanks cradle)
2011-07-15 00:22:26 +02:00
2d71102796
Bugfix: Switch to appropriate workspace when using 'focus' (+test) (Thanks rogutes)
...
Fixes #432
2011-07-14 23:45:36 +02:00
26d63fffc2
testcases: fix config-migrate test case after latest change
2011-07-14 23:07:10 +02:00
b63a559c28
migrate-config: also migrate border toggle (bt) (Thanks woddf2)
2011-07-09 01:02:13 +02:00
0fe564d122
tests: t/19-match needs a little delay
2011-07-09 01:01:52 +02:00
0add563448
Bugfix: multiple criteria should use a logical AND (+test) (Thanks f8l)
2011-07-08 00:21:29 +02:00
3e24b7170f
migrate-config: Bugfix: 'borderless' has to be 'none'
2011-07-06 20:21:39 +02:00
03aa95813e
migrate-config: also handle named workspaces correctly when their names come after the bindings (Thanks xpt)
2011-07-06 17:56:09 +02:00
95ee21dc3b
migrate-config: also leave client.background lines unchanged (Thanks cloud)
2011-07-06 17:51:32 +02:00
a2f297bd39
Add script to migrate a v3 config to v4 (tree). Please test this!
...
Run ./i3-migrate-config-to-v4.pl < ~/.i3/config > /tmp/i3.config
and see if /tmp/i3.config is fine (especially check the comments
starting with XXX, they are inserted by the script).
2011-07-06 13:56:58 +02:00
c408fef021
Implement 'focus floating', 'focus tiling' and 'focus mode_toggle' (+test +docs)
2011-07-04 17:09:52 +02:00
23d4917e43
Bugfix: Correctly revert floating focus when killing the last floating window (+test)
2011-07-01 01:10:43 +02:00
9611e46eb6
Bugfix: testcase was still using 'mode floating' instead of 'floating enable'
2011-07-01 00:37:30 +02:00
e5c811248f
Bugfix: Fix floating assignments, extend test for the assign command (Thanks Tucos)
2011-06-13 17:42:59 +02:00
d641e1da3b
Don’t force wrapping when focusing in a direction would work (+test)
...
Think of the following layout:
-------------
| tab | |
| con | win |
| | |
-------------
The tabbed container on the left has two children. Assume you have focused the
second/right child in the tabbed container. i3 used to focus the first/left
container of the tabbed container when using 'focus right' (it wrapped focus).
With this commit, the default behaviour is to instead focus the window on the
right of the screen.
The intention is to make focus switching more intuitive, especially with tabbed
containers supporting 'focus left'/'focus right' in tree. You should end up
using less 'focus parent' :).
You can force the old behaviour with 'force_focus_wrapping true' in your
config.
Code coverage is 62.5% with this commit.
2011-06-12 12:56:50 +02:00
bef25d72aa
Implement 'border toggle' (+test)
2011-06-10 16:15:52 +02:00
60ae26c19d
Implement 'workspace next/prev' (+test)
2011-06-10 16:03:59 +02:00
bd49c80d5f
CONFIG BREAK: rename 'mode floating/tiling' to 'floating enable/disable'
...
The three different variants now:
floating enable
floating disable
floating toggle
2011-06-10 02:06:47 +02:00
9bbb37bb55
BREAKS CONFIG: rename 'level up' to 'focus parent'
...
…and 'level down' to 'focus child'. More intuitive than the old command names.
2011-06-10 01:36:33 +02:00
9aa7e5fbd6
Parse multiple criteria in commands (+test), better error message for 'focus'
2011-06-08 23:34:08 +02:00
d68e4710fe
CONFIG BREAK: kick the 'next'/'prev' commands, introduce 'focus left' etc.
...
Instead of the cryptic next/prev commands, we now provide an argument to the
focus command. Userguide and default config is updated.
2011-06-08 20:49:49 +02:00
30501e7c8a
add testcase for the fullscreen restart problem of the previous commit
2011-06-03 02:05:34 +02:00
1585d942ea
Make workspace_layout handle all cons at workspace level, not only the first one (+test)
...
This makes opening new windows on workspace level and moving windows to the
right/left more like in the old i3.
2011-06-02 17:21:38 +02:00
51bfdbf0a8
ipc: make 'layout' a string
2011-06-02 17:12:18 +02:00
f007e3621d
testcase: correct window names (trivial)
2011-05-29 13:20:41 +02:00
df0ec0f771
tests: explicitly declare done_testing in subtest
2011-05-25 20:16:14 +02:00
3a6b0f6618
tests: use Test:Most instead of Test:More
...
apt-get install libtest-most-perl
2011-05-25 20:15:52 +02:00
b0bfcb42af
tests: add test for the 'assign' feature
...
Increases line coverage from 60.9% to 61.5%
2011-05-24 22:56:28 +02:00
57516db391
fix typo in t/65-for_window.t
2011-05-24 22:56:06 +02:00
07633a0dc2
tests: make t/59-socketpaths exit gracefully
...
Increases reported line coverage from 60.7% to 60.9%
2011-05-24 22:31:50 +02:00
607fd7d024
tests: also test multiple commands in for_window
...
Increases branch coverage to 49.1%
2011-05-16 22:03:07 +02:00
1bd4c983db
tests: add test for the for_window config directive, use separate config for tests
...
This test increases code coverage to 60.7%
2011-05-16 21:50:34 +02:00
aea445b690
Bugfix: Attach new cons at the correct place when a floating con is focused (+test) (Thanks fernandotcl)
...
New containers were previously attached directly to the workspace instead of to
the previously focused place in the workspace (for example a stacked con).
Fixes : #376
2011-05-13 21:30:37 +02:00
167bdd26b7
Argument for 'kill' for killing a specific window (now default) or the whole client (+test)
...
Use 'kill window' to kill a specific window (for example only one specific
popup), use 'kill client' to kill the whole application (or X11 connection to
be specific).
2011-05-13 20:41:03 +02:00
5eef824495
t/35-floating-focus: rewrite testcase to use windows instead of empty cons
2011-05-13 19:27:18 +02:00
836a3ad615
Bugfix: set WM_STATE to WITHDRAWN when an app unmaps their window(s) (+test)
...
Fixes : #362
2011-05-13 17:04:55 +02:00
94646190aa
Bugfix: Correct string/quoted string parsing for the commands exec, workspace, nop, restore and mark (Thanks SardemFF7)
...
Fixes : #380
2011-05-12 07:09:06 +02:00
c62f70856f
Bugfix: Don’t crash when dock clients set the urgency hint (+testcase)
2011-05-11 22:45:20 +02:00
4da6fc7ba3
Bugfix: Restore border_style when restarting inplace (Thanks aniou)
...
Fixes #385 .
2011-05-11 20:45:56 +02:00
9c05c18156
ipc: change border_style to human-readable string instead of enum value
2011-05-11 20:39:18 +02:00
f67dd28cf0
tests: add testcase for the different socket path locations
2011-04-26 19:15:55 +02:00
9723366eff
tests: add testcase for WM_TAKE_FOCUS
...
requires the very latest checkout of X11::XCB
2011-03-19 02:21:46 +01:00
cdeb49127f
Bugfix: restore focus to the correct window when a non-focused window gets destroyed (+testcase)
2011-03-14 16:34:35 +01:00
2524b5262d
tests: clean up/beautify all tests (code style / test style)
2011-03-09 20:25:17 +01:00
57e7cc8f6a
tests: fix t/19-match.t, needs a delay for i3 to pick up the UnmapNotify event
2011-03-09 18:47:00 +01:00
86637d2e07
Bugfix: Make level up a noop during fullscreen mode (+testcase) (Thanks dothebart)
...
Fixes #341
2011-03-09 18:37:05 +01:00
0a24057241
When leaving fullscreen, set focus to con which was opened during fullscreen (+testcase) (Thanks dothebart)
2011-03-07 00:06:27 +01:00
4514146ed9
Use the combined geometry of children when setting a split container to floating (+testcase) (Thanks mseed)
...
Fixes #332
2011-03-06 02:39:15 +01:00
0a2ee1d2aa
Bugfix: Focus workspace after closing one of multiple dock clients (+testcase) (Thanks mseed)
2011-03-04 15:21:18 +01:00
caa1ac1a9f
Use the original geometry for floating windows
2011-03-03 16:22:22 +01:00
a038d2674b
Bugfix: 'level up' needs to stop at the workspace con + testcase (Thanks mseed)
2011-03-03 14:30:13 +01:00
33c2b4e582
Bugfix: Correctly fix the percent values for resizing when making a floating con tiling (Thanks mseed) (+testcase)
2011-02-28 23:59:56 +01:00
b595ff05c5
Fix regression: Don’t add floating nodes twice when restoring layout (+testcase)
2011-02-28 20:44:23 +01:00
db0d66e545
tests: extend t/10-dock.t for top/bottom positioned dock clients by position/hint
2011-02-21 14:55:03 +01:00
0f97b1fef6
tests: add test for dock client + restart
2011-02-21 12:21:02 +01:00
a678c16bc9
tests: fix t/16-nestedcons.t
2011-02-21 12:20:55 +01:00
95e8b1a467
tests: extend t/10-dock.t to make use of the tree
2011-02-21 00:23:25 +01:00
bafb065d7c
tests: don’t skip t/10-dock.t, make it work again
2011-02-20 23:50:01 +01:00
7f89c71689
Implement dock mode, update testsuite
...
Currently, dock clients are only possible at the top.
2011-02-20 23:43:03 +01:00
6a6746b967
revert the replacement of a single h/v-split with its child container
...
Makes more problems than it creates. Will use a different fix suggested by
Merovius.
2011-02-19 18:30:26 +01:00
26a416e016
refactor tree_move() into src/move.c, change config (!), change testcase
...
Due to lots of cases which were added and added to tree_move(), the function
was not really easy to understand. For this refactoring, I wrote tree_move()
from scratch, thinking about (hopefully) all cases. The testsuite still passes.
The move command also has different parameters now. Instead of the hard to
understand 'before v' stuff, we use 'move [left|right|up|down]'.
2011-02-14 23:05:20 +01:00
44ab15abf0
tests: add testcase for the focus when moving floating con to other ws problem
2011-02-01 18:18:25 +01:00
ed7bee72bd
tests: extend testcase to check for the last commit
2011-02-01 18:18:07 +01:00
dc6241456a
testcases: use the does_i3_live function
2011-01-28 01:21:38 +01:00
2d82868a1a
tests: implement does_i3_live for regression tests
2011-01-28 01:10:45 +01:00
36e20a93a0
add a regression test for the floating move thing
2011-01-27 23:25:36 +01:00
b2ba02f801
add a testcase for correct floating con reattaching
2011-01-27 17:23:29 +01:00
1fecbb3e5a
Bugfix: also close empty split containers when the clients are moved away (Thanks mseed)
...
Also update the testcase (which used only 'kill' before).
2011-01-20 10:09:43 +01:00
115462f103
Implement tree flattening to automatically solve situations of redundant chains of split containers
...
This should fix the move problems. See comment of tree_flatten() for a little
example.
2011-01-07 22:21:41 +01:00
186d2c7bfa
ipc: change 'orientation' to human readable string instead of raw integer value
2011-01-07 20:48:01 +01:00
f65e4f5b16
Bugfix: Don’t redistribute resize percentage values when closing floating (!) windows (Thanks Merovius) (+testcase)
2010-12-30 02:39:14 +01:00
0f0d01336b
Bugfix: Correctly attach floating Cons to a different workspace, extend testcase
2010-11-29 20:39:56 +01:00
613866dbc0
tests: use cmd() in t/32-move-workspace.t
2010-11-29 20:24:13 +01:00
ad825913b4
Bugfix: Fix crash when moving a floating Con to a different workspace, add testcase (Thanks EelVex)
2010-11-29 20:20:44 +01:00
b0068de3d7
Bugfix: Transfer 'percent' factor when splitting, add testcase for resizing
2010-11-29 11:24:12 +01:00
a61480db99
tests: add cmd() function for typing less to get i3 to run a command
2010-11-29 11:21:33 +01:00
a0cd3c2bab
Include 'percent' in tree JSON, use C-locale when dumping, update testcase
2010-11-29 11:10:17 +01:00
178b28ed09
tests: mark t/10-dock.t as TODO, dock clients not implemented yet (makes all tests pass!)
2010-11-28 22:13:09 +01:00
b7e1ae13c5
tests: fix t/30-close-empty-split.t by properly creating a split con
2010-11-28 21:49:42 +01:00
47fe31f104
tests: fix t/31-stacking-order.t: don’t get focus on workspace level, use get_focused()
2010-11-28 21:28:44 +01:00
5872cbcba6
tests: fix t/29-focus-after-close.t to correctly open a split container
2010-11-28 21:16:58 +01:00
40365d347b
tests: fix t/27-regress-floating-parent.t (focus the other tiling client explictly)
2010-11-28 21:11:14 +01:00
a120a820d1
tests: update t/04-floating.t for new border styles
2010-11-28 20:23:17 +01:00
2dba7ec1ec
Bugfix for the last commit (broke some moving situations), update testcase
2010-11-28 20:15:47 +01:00
f55d5e12c9
tests: update t/16-nestedcons.t with new window_rect parameter
2010-11-28 17:29:44 +01:00
d0de3f403d
Bugfix: Restore focus after changing layout (Thanks fernandotcl)
2010-11-28 01:39:47 +01:00
1de97a1f1f
correctly sort numbered workspaces (+testcase)
...
Numbered workspaces (workspaces with a name containing only digits) will be
inserted in the correct order now. Named workspaces are always sorted after
numbered workspaces and in the order of creation.
2010-11-21 23:35:49 +01:00
4549effe15
perl: use get_tree instead of get_workspaces
2010-11-21 21:42:28 +01:00
09b5b17830
Bugfix: Don’t attach tiling containers to floating containers
...
This bug happened when there were only floating containers on a workspace and a
new tiling window was to be opened.
2010-11-21 16:49:59 +01:00
f53fafe100
ipc: s/floating-nodes/floating_nodes for consistency
2010-11-21 16:34:45 +01:00
fcd8518d81
floating-unmap.t: switch order, don’t use workaround
2010-11-20 20:18:00 +01:00
39fa1d724a
bugfix: don’t treat workspace as empty if they only have floating windows (+testcase)
2010-11-20 20:16:15 +01:00
db651679c5
Bugfix: Properly ignore UnmapNotify events (especially for floating windows)
...
This fixes the bug which caused floating windows to be visible even when
switching to a different workspace.
Instead of ignoring a specific sequence, we now set an ignore_unmap counter for
each container. (So, should containers be closed too early or stay open even if
they should be closed, we probably need to have a closer look at the counter.
At the moment, it is increased by one on reparenting and unmapping (for
workspace changes) and decremented by one on each UnmapNotify event).
This system is better because a sequence does not describe a single unmap or
reparent request but a request to X11 on the network layer -- which can contain
multiple requests.
2010-11-20 19:11:43 +01:00
a27af52706
fix floating focus behaviour, extend testcase
2010-11-14 22:35:44 +01:00
ffff4b159f
add testcase for focus problem when toggling floating/tiling mode
...
Test 3 does not yet pass.
2010-11-14 21:43:31 +01:00
510d1f78a1
modify t/04-floating.t to reflect the new way we are doing decorations
2010-11-14 16:42:13 +01:00
dc10c67060
Bugfix: Close containers which are empty due to a move (Thanks fernando)
2010-11-13 14:55:11 +01:00
4aef09ab34
t/16-nestedcons.t: add 'border' key
2010-11-13 14:33:58 +01:00
432073dbe5
implement support for WM_TRANSIENT_FOR, expand testcase
2010-11-13 01:19:21 +01:00
8f7bd538d8
implement configure requests, adapt testcase
...
testcase does not pass 100% due to clients not being reparented correctly yet.
2010-11-12 21:41:10 +01:00
6c699801ab
bugfix: need to use window_type instead of type in t/04-floating.t
2010-11-12 20:36:37 +01:00
df2ded08d8
add testcase for invalid commands
2010-11-12 20:26:53 +01:00
5c2758af26
Implement support for size hints (including test case)
2010-10-11 21:32:29 +02:00
27ffe9eae1
t/22-split: Bugfix: don’t declare old_count twice (Thanks Lourens)
2010-08-21 18:25:48 +02:00
c780f5dd0b
Test 16 fixed expectation of the (root) focused field to exist in the tree and always be zero.
2010-08-21 18:24:21 +02:00
b572fea5c6
testcase: use open_empty_con in some more testcases
2010-07-17 15:52:22 +02:00
b4e3563dc1
t/29-focus-after-close.t: add more tests (for a regression)
2010-07-17 15:17:33 +02:00
55f695436a
testcases: Implement open_empty_con which directly returns the ID
2010-07-17 15:17:16 +02:00
21c45418b3
more explanation in t/29-focus-after-close.t
2010-07-17 13:37:21 +02:00
099df7f438
Bugfix: Keep focus on the current workspace when moving containers, add testcase
2010-07-17 13:27:34 +02:00
69e5c0f6ce
Treat stacking containers as if they are in vertical orientation, add testcase
2010-07-17 01:27:47 +02:00
09c6b587d3
close empty parent containers, add testcase
2010-07-17 00:54:47 +02:00
16f5c879f6
testcases: remove 'use v5.10' as this is automatically done in lib/i3test
2010-07-04 19:53:05 +02:00
b186446fb7
Bugfix: Correctly restore focus after close (and add testcase)
2010-07-04 19:50:44 +02:00
49ed703299
Bugfix: Insert new containers at the right position (and add testcase)
2010-07-03 17:42:36 +02:00
66fc795379
lib/i3test: use custom import() instead of Test::Kit to also import v5.10
2010-07-03 16:28:58 +02:00
f7842e4c71
t/18-openkill.t: search not focused container instead of using the first one
2010-07-03 15:29:44 +02:00
4eace6f886
Go down the tree when moving windows, add testcase for moving
2010-06-29 19:05:31 +02:00
285692c92c
Update testcases (and skip some tests for the moment)
2010-06-02 23:53:22 +02:00
6897e15e72
Implement mark/goto, modify testcase
2010-06-02 23:32:05 +02:00
32be3af109
Re-implement support for the urgency hint, extend t/13-urgent.t
...
The actual rendering will follow
2010-06-02 17:55:10 +02:00
03c8da0a74
t/lib/i3test.pm: refactor get_ws and get_ws_content using List::Util’s first
2010-06-02 17:50:06 +02:00
18f7e1ffd1
t/22: extend to verify that splitting in the same direction multiple times does not create new containers
2010-06-01 22:42:32 +02:00
249c3f58ab
t/21: formatting
2010-06-01 22:29:09 +02:00
3aa1801392
add testcase for crash on closing floating windows whose parent was killed
2010-06-01 20:52:59 +02:00
afa8be9547
lib/i3test: Implement get_focused
2010-06-01 20:52:22 +02:00
a25dc3e988
Implement focus command (and extend t/21-next-prev.t to test it)
2010-06-01 18:49:43 +02:00
de0c13ba78
Add testcase which ensures that floating windows can be closed
...
See last commit
2010-05-31 23:17:02 +02:00
6a1c34d2c5
Implement 'split'
2010-05-10 09:33:10 +02:00
145ebc7584
Implement 'prev', extend testcase
2010-05-10 09:08:31 +02:00
d8307f4b4a
implement 'next' in the new command parser (testcase unfinished)
2010-05-10 00:06:24 +02:00
65e9036837
bugfix: don’t clean up workspace when switching to the same workspace
2010-05-09 23:20:49 +02:00
206e1ed041
less boilerplate by using Test::Kit and -It/lib in Makefile
2010-04-17 22:49:26 +02:00
a2e3bb1cdd
make testcases use AnyEvent::I3
2010-04-17 22:40:01 +02:00
fdd44dcada
make the fullscreen testcase test the 'fullscreen' command, too
2010-04-17 19:29:27 +02:00
b244ce3915
extend fullscreen testcase
2010-04-17 17:40:19 +02:00
1b4bd96ea9
extend t/02-fullscreen.t
2010-04-17 13:53:41 +02:00
9488e3d249
add testcase for multiple commands (and whitespace variations)
2010-04-17 12:58:36 +02:00
50d590df28
add test for the match functionality in the new parser
2010-04-16 23:04:42 +02:00
f48cc9ee21
update t/16* for data structure
2010-04-16 21:01:08 +02:00
93600ce0fd
implement con_id for matching containers, extend testcase
2010-04-16 15:30:07 +02:00
caa1e9a962
move common functions to i3test, export them, bail out if workspace creation fails
2010-04-16 15:03:27 +02:00
64d34d7e70
add testcase for opening/killing containers
2010-04-16 14:52:31 +02:00
d94bef2ebb
retab!
2010-04-16 14:34:12 +02:00
9b737f631d
add testcase for changing workspaces
2010-04-16 14:24:29 +02:00
c145f7e529
first step of the big refactoring ("tree" branch).
...
From here on, we can track changes. It made no sense to put the
development up to this point into git.
2010-04-13 13:17:39 +02:00
93a9f3c244
Bugfix: Don’t mess up x/y coordinates in configurerequests for floating windows
...
This was the cause for ticket #93 , which actually has a false
conclusion for the reason of this bug.
This code needs to be refactored.
2010-03-11 23:34:29 +01:00
9a9ba1b859
ipc: implement GET_WORKSPACES message type
...
This is the foundation to use dzen2 or similar as a complete
replacement for the internal workspaces bar.
A testcase is included, more documentation about the IPC interface
will follow.
2010-03-11 15:58:39 +01:00
f7c8e76782
Select containers above or near the whole snapped width/height
...
This fixes ticket #100 , and is best explained using a little example.
Consider the following layout:
+---+---+
| | X |
+---+---+
| X |
+---+---+
Where X marks a window, so you have an empty container in the upper
left, the container on the bottom is snapped to the right. Before
this commit, nothing would happen when focusing "above". After
this commit, the upper window gets focused.
2010-03-11 00:15:34 +01:00
7a9755ad91
Add testcase for the last commit
2010-03-05 19:53:33 +01:00
8a9b57c874
Extend testcase for dock clients with wm_transient_for hint
2010-01-01 16:19:55 +01:00
245e29ef95
Expand testcase for urgency hint
2009-11-20 15:56:18 +01:00
ff3809f388
Add testcase for resizing of floating windows
2009-11-18 22:52:34 +01:00
0610c028d6
Add testcase for the urgency hint
...
Needs latest X11::XCB from git
2009-11-18 20:39:53 +01:00
f9d155341e
Change testcases to work with the released version of X11::XCB
2009-10-26 20:04:37 +01:00
87ced0438a
Add testcase for the mark/goto command
2009-10-07 21:50:23 +02:00
cf17e73293
Add a new test for moving clients to different workspaces (tiling and floating)
2009-10-01 17:18:11 +02:00
f5c0bfd181
More tests
2009-08-22 07:53:34 +02:00
32532792cd
tests: Use hex color codes for background_color
2009-08-21 16:06:12 +02:00
4a83bd26f8
Implement tests in t/10-dock.t
2009-08-21 15:01:20 +02:00
01f06f11ba
Use ArrayRefs instead of Rects where possible, add t/10-dock.t
2009-08-21 12:32:54 +02:00
a1e9f75fe5
Expand fullscreen test to setting the hint before mapping the window
2009-08-21 12:15:53 +02:00
992c531c4c
Switch to default mode before running the test
2009-08-06 00:16:26 +02:00
bc4c321c1b
Add testcase to test stacking mode for containers
2009-08-06 00:03:31 +02:00
aaca2346d8
Add testcase for checking if the focus stack is correct when mapping/unmapping floating clients
2009-08-05 21:54:24 +02:00
d9f8e2fa98
Add test for moving windows
2009-08-05 21:47:43 +02:00
0f414f8ade
Add testcases for IPC and basic focus switching
2009-08-05 21:37:11 +02:00
6e77e9d3f2
Add testcase for floating windows, add sleep to 01-tile.t
2009-08-05 20:47:10 +02:00
730508057c
use sleep with fractions, not usleep
2009-07-23 01:14:36 +02:00
dba1612655
Add test case for unmanaged windows (override_redirect => 1)
2009-07-16 14:29:18 +02:00
47041bdd73
Add testcases :-)
2009-07-16 13:43:43 +02:00
Michael Stapelberg