When receiving an ENTER_NOTIFY event on a dock client we returned as to not
focus the dock client (cf. #321 and #323). However, we still need to check
for crossing output boundaries and if that happened focus the new output.
Otherwise it can happen that the cursor is on a different output than the
focused output. When opening a window, this would open it on the old output
and then warp the mouse there. This effect will be even worse if the window
is immediately moved with 'move position mouse' as the window will end up
in its correct position on the new output and the cursor warped to the old
output.
relates to #2081
This commit correctly handles colormaps by
* Using the static default colormap we determine on startup if the
con has the corresponding depth. This avoids creating pointless
colormaps.
* Not freeing the default colormap to not have stray colormaps on
containers. This fixes an issue with certain programs such as xwd.
* Creating a custom colormap when necessary and freeing it when the
container is killed.
fixes#2435
Before this commit, i3 only compared the user-specified modifiers and
incorrectly ignored the resolved modifiers (such as the numlock
fallback).
While at it, also fix the testcase which treated numlock as a momentary
modifier, whereas it really is a latched modifier.
fixes#2418
Previously, we always discarded the NumLock bit when looking up key
bindings for key press events, and we always grabbed every keycode with
and without the NumLock modifier.
With this commit, the NumLock bit is no longer discarded: since the
previous commit 3bd5e6e5c8 we can
correctly look up key bindings with/without the NumLock bit, as both
variants are stored in |keycodes_head|.
Further, before adding the NumLock fallback (resulting in grabbing the
keycode with the NumLock modifier), we now check whether the key has the
same meaning when NumLock is enabled. This correctly distinguishes the
KP_End vs. KP_1 case, i.e. one can now use the following key bindings:
# No longer accidentally triggered when pressing KP_1.
bindsym KP_End nop KP_End
# Properly distinguished now:
bindsym KP_End nop KP_End
bindsym Mod2+KP_1 nop KP_1
fixes#2346
since OpenBSD pthread does not support pthread_condattr_setpshared().
This patch could also stay in the OpenBSD ports tree or depend on a
configure test macro rather than defined __OpenBSD__.
Prior to this commit a binding specifying only --whole-window would
trigger even when clicking on the window border. However, this should
only happen if --border is specified.
fixes#2348
Use case:
* When managing multiple terminals in a workspace, the borders makes it easier
to know where the focus is, but when there is only one it's obvious where the
focus is.
* When there's only a web browser for example, the borders are actually counter-
productive since it makes clicking a side scrollbar or a tab a bit harder (if I
smash my cursor to the side or the top of the workspace, I have to move it in
the other direction by just a few pixels to be able to grab it)
Behaviour:
* No borders when there's a single window in a workspace
* Borders when there are multiple windows in a workspace
fixes#2188
This patch introduces a new 'set_from_resource' config directive which
allows defining a variable by retrieving its value from the X resource
database. This avoids having to configure a color scheme in multiple
files. The directive takes an additional fallback value which is used
in case the resource cannot be found or during config validation where
no X connection is available.
Furthermore, this patch includes the following changes:
- If the same variable is defined twice, we now properly overwrite the
value of the assignment rather than inserting two variable definitions
with the same key.
- We now depend on xcb-util-xrm to query the resource.
- Increase the buffer size for variable / resource assignments.
fixes#2130
If an output is disabled during a restart, for example because a binding
such as
bindsym $mod+Shift+r exec "xrandr --auto", restart
is used, it can happen that we first write the layout to disk and only
then receive the RandR change events. This leads to a situation where
the restored tree will contain these outputs, but the restarted i3
process will not receive the RandR events, thus the internal output in i3
is marked disabled.
This patch finds these cases after a restart and force-disables the
affected outputs.
fixes#2326
In most cases this won't make a difference, but consider the following
scenario:
* Some application acquires input focus on its own (which the window manager
is not involved in, so it will "always" work).
* Before the FocusIn / FocusOut events are processed by i3, the
workflow to push X changes is run, resulting in xcb_set_input_focus()
being called.
Using XCB_CURRENT_TIME, this means i3 will "win" and override the focus,
even though it simply wasn't aware (yet) that focus had already been taken
over by someone else. When processing the FocusIn / FocusOut events, i3
assumes that the focus is already set which results in a broken focus
state as i3 assumes some container has the input focus when it doesn't.
With the new behavior, i3's attempt to set the input focus will fail if
the FocusIn / FocusOut events have not yet processed. Once they are processed,
the focus state will be automatically corrected.
fixes#2322
This code has been neutralized for many years now and served no purpose
other than cluttering up the code. We obviously don't need it and it's
out of date anyway.
If there's ever any reason to restore (parts of) it, we have git for
that. But we don't need to keep commented out code around.
This commit removes the title indentation in certain nested container
situations. The behavior was considered broken as it didn't seem to
make sense and it was unclear why this was introduced.
Given that nobody on i3-discuss@ complained about removing this logic
within two weeks, we are now removing it to make the title rendering
code a little less complex.
fixes#2247
Since we don't actually stop drawing a title (or marks) with the
distance of the border width on the right side, but instead with
a hard-coded two pixel distance, we can only redraw that much of
the border without potentiall cutting off text.
relates to #2247
Use `uintptr_t` to cast the con id to int instead of `long int`. This
type is guaranteed to hold the pointer as an int regardless of platform.
fixes#2283
Previously we counted the number of (direct) children of the workspace to
decide whether no_focus should be applied or not. However, this doesn't
work correctly if there's a single container with multiple windows on the
workspace.
This patch correctly counts all windows on the workspace.
fixes#2292
This is a followup to #2049. While we had fixed that bug by only grabbing
buttons 4 and 5 if there is a whole-window binding for that button, this
did not consider buttons higher than 5 as found on many mice.
Therefore, we now ditch the special handling for scrollwheel buttons and
instead do the same for all buttons higher than 3.
fixes#2271
With this change, multi-monitor presentations (e.g. as implemented by
LibreOffice Impress) work out of the box. Previously, one had to move
the presentation windows to the right outputs oneself.
If a user reloads the config while in some binding mode, the binding mode
will revert to the default, but no event will ever be fired, causing a
broken i3bar mode display.
This patch explicitly reverts to the default binding mode before reloading
the config. We reload rather than switch to the binding mode after having
reloaded the config because there's no guarantee that mode will even still
exist.
fixes#2228
This patch correctly determines the previously focused workspace on the
target output when moving a workspace to another output. Before, we used
nodes_head for this, which will not actually return the previously focused
workspace, but just the first workspace on that output. Hence, we now use
focus_head instead.
This bug was introduced all the way back in 1e143fea when the feature of
moving workspaces to another output was first implemented.
fixes#2229
This patch introduces a proprietary atom I3_FLOATING_WINDOW which will be
set and maintained for floating windows and removed on tiling containers.
This allows users to select on this atom, e.g., in their compositor
configuration or in utility scripts (without using the IPC).
fixes#2223
Manually updating a magic number doesn’t work in the long run.
With this change, the number of atoms contained in
include/atoms_NET_SUPPORTED.xmacro is used.
fixes#2230
This is essentially a revert of daf00a9 which introduced a mechanism
to float workspace containers by wrapping all children into a new
container and floating it.
This caused a bug and there's no good reason (anymore) to allow doing
this in the first place as we don't support floating nested containers.
fixes#2166
This allows "modifier none" (and "modifier off") for the bar config
in order to disable the modifier key altogether. This is useful
for users who use a different approach to hiding / showing the bar,
e.g., a custom keybind that involved multiple keys or scripts.
fixes#2208
Until now, only the config directive for borders (new_window,
new_float) respected the DPI setting (using logical_px). This
patch makes sure we also do so for runtime "border" commands.
fixes#2202
We now build a docker base container based on debian sid (where the very
latest packages are available). That base container is updated once a
month, or whenever travis-build.Dockerfile or debian/control change, but
re-used for subsequent travis runs. While the initial build might take
up to 15 minutes, subsequent builds typically run in a minute or two.
All the different steps that we run on travis are now factored into
separate scripts in the travis/ directory.
Switching to docker should also help with issue #2174.
Ignoring the focus leads to a broken focus if the pointer is, e.g.,
over i3bar at the point in time the window is moved by the client
message. It also causes i3bar's workspace display to break.
Thanks to GermainZ for reporting.
We don't actually need to grab the buttons to fix#2097, but doing so
will cause a freeze due to unreleased events.
We partially revert 6f12f02 which avoids the freeze, but doesn't break
functionality.
relates to #2097fixes#2168
We already claim _NET_WM_DESKTOP support in _NET_SUPPORTED since around 2009,
but haven't actually done anything with it. However, especially pagers like
gnome-panel rely on this property to be updated and many tools, like GTK, want
to use the corresponding client messages to make a window sticky, move it
around etc.
This patch implements full support according to the EWMH spec. This means:
* We set the property on all windows when managing it.
* We keep the property updated on all windows at all times.
* We read and respect the property upon managing a window if it was set before
mapping the window.
* We react to client messages for it.
* We remove the property on withdrawn windows.
Note that the special value 0xFFFFFFFF, according to the spec, means that the
window shall be shown on all workspaces. We do this by making it sticky and
float it. This shows it on all workspaces at least on the output it is on.
Furthermore, the spec gives us the freedom to ignore _NET_WM_DESKTOP when
managing a window if we have good reason to. In our case, we give window
swallowing a higher priority since the user would likely expect that and we
want to keep placeholder windows only around for as long as we have to.
However, we do prioritize this property over, for example, startup
notifications.
fixes#2153fixes#1507fixes#938
pledges for i3:
"stdio rpath unix" for talking to the i3 socket usually in /tmp
"proc exec" for executing programs
"wpath cpath" are needed for the restart-in-place functionality
To make this work, @semarie pointed out that it is sufficient to ensure
that we get physical_mem_bytes only once, namely in init_logging().
pledges for i3-msg:
"stdio rpath unix" are needed for talking to the i3-socket
pledges for i3-nagbar
"rpath getpw" to find the home directory
"wpath cpath" to write the script
"proc exec" to execute the script
This disables the default leak-check-on-exit behavior which reports a
bunch of leaks that are only leaks while exiting, at which point they
don’t matter, because the operating system will clean up the memory our
process used.
The newly introduced decoration_border color incorrectly uses the default value
for "background" as a fallback when not specified. Instead, it should use the
user-specified "background" as a fallback.
fixes#2149
This patch moves the title_format information from windows to containers.
Furthermore, it allows correctly setting it on window-less containers and
displays the title accordingly for split containers.
We now also dump and read title_format in GET_TREE / during restarts.
fixes#2120
Corrects the cases where the colorpixel is not 0xRRGGBB : we have to
use the full color_t struct to describe font colors, as Pango expects
RGB values and not an XCB colorpixel value.
We now execute the validations when "kill" is executed even if match
criteria are used. This prevents users from killing workspace containers,
which instead kills all clients (as before when not using criteria).
fixes#1761
It should be clear for callers of this function that this is an internal
function that skips certain validations which might be important. Therefore
we make it clear that this is an internal function by renaming it.
relates to #1761
We need to move the urgent flag when moving a container across
workspaces before calling on_remove_child on the parent in order
to avoid a crash.
fixes#2128
This fixes race conditions, for example when i3bar gets reconfigured
after the available outputs change. In that specific case, i3bar sends a
ConfigureWindow request (see
b5693d6fb3/i3bar/src/xcb.c (L376))
which normally is turned into a ConfigureRequest that i3 largely
ignores, only the dock client’s height is considered (see
b5693d6fb3/src/handlers.c (L390)).
Turning ConfigureWindow into ConfigureRequest is only done when the
SubstructureRedirect event mask is set, and because we temporarily
removed _all_ events from our mask, the ConfigureWindow request went
through unmodified.
This in turn lead to the i3bar client window (not its decoration frame)
being positioned at e.g. y=1304, whereas dock client windows should
always end up at x=0 y=0 within their decoration frame. The result of
the i3bar client window being out of the visible space was either a
black i3bar or graphics corruption.
This also fixes issue #1904, I think. I couldn’t reproduce issue #1904
specifically, but when i3bar is in the misconfigured state, it will
receive a VisibilityNotify event, telling i3bar that it is obscured.
This would explain why i3bar sent a SIGSTOP in issue #1904.
fixes#1904
Previously, if a match specification contained the con_id or con_mark criterion,
all other criteria were ignored. However, a user may want to specify one of
those two unique identifiers and still specify others as well, for example to
match the currently focused window, but only if it has a certain WM_CLASS:
[con_id=__focused__ class=special] kill
We now check all specified criteria.
fixes#2111
This commit fixes#1969 by adding support for matching a window's type
against _NET_WM_WINDOW_TYPE_NOTIFICATION. The userguide and tests were
updated to reflect this change.
Previously, mouse bindings could only be run when a window was present,
by using --whole-window. Such bindings would not work on empty
workspaces. However, this is a valid usecase for bindings like
bindsym $mod+button4 workspace prev
bindsym $mod+button5 workspace next
Hence, we need to grab the root window as well and run bindings on it.
fixes#2097
Previously, using a command like
[con_id=foo] kill
would kill the currently focused window because while an error for
not being able to parse the con_id was logged, no further action
was taken, which caused the criterion to be ignored. In this case,
the fallback behavior of using the focused window took over.
For con_id, id and window_type we now reject incorrect values with
an error and abort the command.
fixes#2091
The values of a Rect are unsigned, but can contain signed values.
Using MAX when the value is negative causes incorrect behavior and
makes the result stay negative, which is what we wanted to avoid here
in the first place.
Fix by properly casting the value for the comparison.
fixes#2094
With this patch, we use 32-bit visuals per default whenever it is
available. Otherwise, we fall back to the actual root window's
depth, which will typically be 24-bit.
Before this patch, we already used 32-bit depth for containers with
a window that uses 32-bit. However, this means that we didn't use
32-bit for split parent containers on which decoration is drawn.
For 32-bit windows using transparency, this caused a graphical glitch
because the decoration pixmap behind it would show through. This
behavior is fixed with this change.
relates to #1278
Such containers never require a pixmap anyway. In particular for the __i3
output (used for the scratchpad workspace), this would cause an allocation
error anyway because it can be very big -- so big, in fact, that X cannot
allocate the pixmap for it.
Until now, this error was silently ignored due to the fact that we did not
create the pixmap checked (and asserted its success), but with cairo this
would cause a crash because we'd try to create a surface for a pixmap
which doesn't exist.
relates to #1278
With this patch we remove the temporary draw_util_colorpixel_to_color
function we introduced previously by parsing the colors as color_t to
begin with.
relates to #1278
We return early from drawing functions if the surface to draw to is not
initialized properly. There is no immediate need to do so, at least no
crashes have been observed, but it mirrors the previous behavior a bit
more closely. Furthermore, i3 should not crash due to not being able to
make some rendering call, so this provides some stability.
relates to #1278
This patch migrates all decoration rendering of i3 to cairo. Using the
compile switch CAIRO_SUPPORT, rendering can be switched back to the
previous XCB behavior, just like with the previous migration to cairo
in i3bar.
This patch also fixes a bug in draw_util.c where copying one surface
to another would use incorrect coordinates if the source coordinates
are not 0, 0.
Furthermore, this patch implicitly fixes some minor issues in the
decoration rendering which would be ignored previously due to the fact
that errors would only show up in the event queue, but not cause the
rendering code path to crash. One example is zero-height pixmaps which
are not allowed. Using cairo, these would cause i3 to instantly segfault,
so this patch avoids this.
Lastly, this patch annotates other issues found but not fixed in this patch
using TODO comments, e.g., the zero-height check not working correctly
and the comment that it should probably work the same way for zero-width
pixmaps.
relates to #1278
Mouse bindings that target the window that was clicked send the command
to the parser with `con_id` of the clicked window serialized base 16
for compatability with FreeBSD. See 7c2842e for explaination.
Set base to 0 for strtol to handle base 16 numbers for that reason.
This allows mouse bindings that target specific windows to work
correctly. Without this change, the focused window is always targetted
rather than the window that was actually clicked.
Regression introduced in b744c5e.
With this patch, we support the special value "0" for _NET_WM_USER_TIME
on a window upon managing it, which indicates that the window shall not
be focused.
fixes#2064
This reverts commit 9692c1498b.
That commit accidentally defaulted to group mask 1, but the default
should be to match any group mask, so that having multiple layouts
loaded at the same time works.
fixes#2062
With this patch, we only grab the scrollwheel buttons (4 and 5) when
managing a window if a whole window key binding exists for these buttons.
This allows both of these usecases:
- Bindings to scrollwheel buttons using --whole-window (see #1701).
- Scrolling in a window without focusing it if no such binding
exists (see #2049).
Furthermore, we drop all button grabs and regrab them after a config
reload in order to reevaluate the new bindings correctly.
fixes#2049
We refactor the button grabbing into a function to allow the next patch
both to
- conditionally grab different sets of buttons
- grab the buttons again when reloading the config.
relates to #2049
As there is no need to keep autostart commands in memory, we can safely
remove them as soon as they have been executed. As we previously didn't
clear them at all during config reloads, this also fixes a memory leak.
Note that neither autostarts nor autostarts_always is executed during
config reloads, so removing them from memory is fine as an i3 restart
will cause them to be parsed again.
fixes#2044
1. i3 config validation failed when the new line is missing from the end of file.
The error was: "ERROR: Your line continuation is too long, it exceeds 4096 bytes".
It is wrong to assume that there is always a '\n' at the end of each line in the config file.
(Not for the last line.)
Fix it via adding a end-of-file check.
2. See the issue #2051. (https://github.com/i3/i3/issues/2051)
This patch introduces the possibility to specify the tray_output directive
multiple times. All values will be used by i3bar, in the order they are
given.
This way, a single bar configuration can be used for several machines with
internal output names "eDP1" and "LVDS-0" by specifying tray_output for both.
Any external output (e.g., "DP-0") will still not receive the tray. The same
effect can be achieved by using "primary", but forces the user to couple the
tray display to the primary output which may not be desirable behavior.
relates to #555
This patch extends the previously introduced flag --no-auto-back-and-forth
to also apply to
move window to workspace <name>
move window to workspace number <number>
relates to #2028
Since splitting a docking container was allowed and successful, the check
to prevent floating it fails to work. This causes a crash because the
workspace of the container cannot be determined as the dockarea is higher
up in the tree than the workspace it belongs to.
This patch extends to sanity check to nested dock containers when trying to
float a container and also disallows manually splitting a docked container
or changing its layout.
fixes#2034
We need to store the information that an assignment was run for a window
before actually executing the command. Otherwise, if the command causes
a change that causes assignments to be run again, the window might be
matched again, causing an infinite loop and hence i3 to freeze or crash.
Assignments don't necessarily represent workspace assignments, but could
also be used, e.g., for no_focus. Hence, there's no point in logging
dest.workspace for all assignments.
Suppose a horizontally oriented workspace has two windows open. Issuing "split h" on
the right window creates a nested horizontal container. If we now resize in "width"
direction, the resize doesn't work because it will only operate on the current parent,
which is a container with only one child, so the resize command exits.
This is unexpected behavior from a user point of view. Hence, with this patch, we
ensure that we don't just go up the tree until we find a parent with the correct
orientation, but also keep going if that parent has only a single child.
fixes#2015
This patch introduces the --no-auto-back-and-forth flag to both of
workspace --no-auto-back-and-forth <name>
workspace --no-auto-back-and-forth number <number>
This flag will only have an effect if the back_and_forth feature is
enabled. If passed, the feature will be ignored for this particular
call only.
fixes#2028
This allows matching with
[con_id=__focused__] unmark
for commands that do not default to operating on the focused window
if no criteria have been specified (such as unmark).
relates to #2014
This patch allows using 'unmark' on matched windows. The old behavior
of applying it to all windows if no criteria were specified is kept.
relates to #2014
In order to keep compatibility to before allowing multiple marks on a window,
we introduce a flag "--add" that must be set to put more than one mark on a
window. The default, which is also available as "--replace", keeps the old
behavior of overwriting a mark when setting a new one.
fixes#2014
This patch allows multiple marks to be set on a single window. The restriction that a mark may
only be on one window at a time is still upheld as this is necessary for commands like
"move window to mark" to make sense.
relates to #2014
When a window is moved to a mark and the marked container is a workspace,
we can skip any other logic and just call con_move_to_workspace directly.
fixes#2003
See the issue #1798 (http://github.com/i3/i3/issues/1798).
+workspace_next+ as-is cycles through either numbered or named workspaces,
but when it reaches the last numbered/named workspace, it only looks for
named workspaces. This commit changes it: look for named workspaces after
exhausting numbered ones, but also for numbered ones after exhausting
named ones.
Also add a test case 528-workspace-next-prev.t (numbered workspaces and named
workspaces on 2 outputs) for testing this.
This introduces the flag "--pango" on the mode config directive to
explicitly enable pango markup for mode names. Not setting this will
cause the mode name to be rendered as is.
This fixes a regression in 4.11 where mode names containing characters
such as '<' would break user's configs as they didn't escape these
characters.
fixes#1992
With this patch, the no_focus directive will be ignored if the
to-be-opened window is the first on its workspace as there's no
reason the user would not want to focus it in this case.
This improves usability when, for example, using a tabbed
workspace_layout.
fixes#1987
This patch creates all necessary windows for i3bar with 32-bit visuals if available.
It also introduces the possibility to define RGBA colors (next to RGB colors), which
allows the user to set the opacity of any color. This requires running a compositor.
With this patch we also start supporting _NET_SYSTEM_TRAY_VISUAL, which is necessary
for the tray icons so they create the tray window with the correct depth and visual.
1). See the issue #1926. For example, the second keybinding is not detected as a duplicate:
bindcode Mod4+24 sticky toggle
bindsym Mod4+q focus parent
2). To fix it, check duplicated bindings when translating the keysym to keycodes.
`vlog()` can not handle log messages longer than 4096 bytes. However, the
message generated in `store_restart_layout()` is likely to exceed this
as it contains a long JSON string.
This has caused a few SEGFAULTS during restarts for me when running with
`-d all`.
Fix this by truncating the message to 4096 bytes and punching in a newline at
the end.
This fixes a bug I introduced in #1921. When restarting i3 in place a
stray workspace was created on the root_output during restart. On first
start, this workspace would have been moved to the first real and empty
output.
However, this does not produce the desired result during restarts when
workspaces are alread present on all real outputs. The stray workspace would
still be added to the first real output which already contains some
workspaces. Thus, adding a new empty workspace to it.
Fix this by delaying creation of the root output's workspace until it is
known whether the output is active or not.
Fixes#1940
This is necessary during a restart of i3 when restoring floating windows. In this situation, we restore the layout before setting up the RandR outputs which would set the window's size to 0, making it invisible.
Thanks to hwangcc23 and spudowiar for reporting.
fixes#1910fixes#1934
1. Reference: issue #1929
2. When restarting, add the argument "-d all" if debuglog is on.
3. Add add_argument() for adding/replacing the given argument.
This patch introduces a root output covering the root window. It is used
in two cases:
1. RandR is not available. In this case, the previous behaviour of
creating a single output covering the root window is preserved.
2. RandR is available, but there is no active output. In this case,
the root output is enabled and will be the only active output.
If any RandR output becomes available, the root output will be
disabled again. Existing mechanisms for migrating workspaces will
just work without modification.
I've carefully slipped in a global variable `Output root_output` representing
that output.
Fixes#926 and #1489
This commit also reworks the way focusing sticky windows is prevented by not focusing them temporarily at all, but preventing the focus in the first place.
If no other window is available on the active workspace, we now select the EWMH support window (used to indicate that an EWMH-compliant window manager is preent) as the focus window rather than the root window. The NET_WM_ACTIVE window will still be set to XCB_WINDOW_NONE to pretend that no window is actually focused.
This fixes the issue that when using the root window, a fallback mechanism in X11 takes effect which routes keyboard input to the window under the cursor, independent of whether that window has the input focus. Using the EWMH window instead, we can avoid this behavior. We cannot simply set it to XCB_WINDOW_NONE as this would discard all keyboard events, breaking keybindings.
fixes#1378
Reordering once (as we did it before this commit) would only sort the
bindings by the _first_ bit of their event_state_mask, but we need to
sort them by _all_ bits of their event_state_mask.
fixes#1870
fixes#1835
This commit improves the translation of keysyms to keycodes by loading
keymaps using libxkbcommon-x11 and using libxkbcommon for figuring out
the keymap, depending on each keybinding’s modifiers. This way, the
upper layers of complex layouts are now usable with i3’s bindsym
directive, such as de_neo’s layer 3 and higher.
Furthermore, the commit generalizes the handling of different XKB
groups. We formerly had support only for two separate groups, the
default group 1, and group 2. While Mode_switch is only one way to
switch to group 2, we called the binding option Mode_switch. With this
commit, the new names Group1, Group2 (an alias for Mode_switch), Group3
and Group4 are introduced for configuring bindings. This is only useful
for advanced keyboard layouts, such as people loading two keyboard
layouts and switching between them (us, ru seems to be a popular
combination).
When grabbing keys, one can only specify the modifier mask, but not an
XKB state mask (or value), so we still dynamically unbind and re-bind
keys whenever the XKB group changes.
The commit was manually tested using the following i3 config:
bindsym Group4+n nop heya from group 4
bindsym Group3+n nop heya from group 3
bindsym Group2+n nop heya from group 2
bindsym n nop heya
bindsym shift+N nop explicit shift binding
bindsym shift+r nop implicit shift binding
bindcode Group2+38 nop fallback overwritten in group 2 only
bindcode 38 nop fallback
…with the following layout:
setxkbmap -layout "us,ua,ru,de" -variant ",winkeys,,neo" \
-option "grp:shift_caps_toggle,grp_led:scroll" \
-model pc104 -rules evdev
By default (xkb group 1, us layout), pressing “n” will result in the
“heya” message appearing. Pressing “a” will result in the “fallback”
message appearing. “j” is not triggered.
By pressing Shift+CapsLock you switch to the next group (xkb group 2, ua
layout). Pressing “a” will result in the “fallback overwritten in group
2 only” message, pressing “n” will still result in “heya”. “j” is not
triggered.
In the next group (xkb group 3, ru layout), pressing “a” will result in
the “fallback” message again, pressing “n” will result in “heya”,
“j” is not triggered.
In the last group (xkb group 4, de_neo layout), pressing “a” will still
result in “fallback”, pressing “n” will result in “heya”, pressing “j”
will result in “heya from group 4”.
Pressing shift+n results in “explicit shift binding”, pressing shift+r
results in “implicit shift binding”. This ensures that keysym
translation falls back to looking at non-shift keys (“r” can be used
instead of ”R”) and that the order of keybindings doesn’t play a role
(“bindsym n” does not override “bindsym shift+n”, even though it’s
specified earlier in the config).
The fallback behavior ensures use-cases such as ticket #1775 are still
covered.
Only binding keys when the X server is in the corresponding XKB group
ensures use-cases such as ticket #585 are still covered.
This reverts commit e71c304444.
It turns out that several users have workflows in which they turn off
their monitors without using e.g. `xrandr --output DP-1 --off`. The
result is that the monitors are disconnected, but not disabled.
With commit e71c304444, i3 started to see
these two states as one and the same state, but that causes more harm
than it does good. For example, for some users with only one monitor, i3
would just exit when these users turned off their monitor.
related to #1858, #1839fixes#1845
With commit c738b2e454 we changed i3 so
that the default keybindings can be used when ISO_Next_Group is enabled,
but bindings which explicitly use Mode_switch have precedence. This
behavior required the use of bindcode instead of bindsym.
With this commit, when switching from group 1 to group 2 using
ISO_Next_Group, i3 will re-translate all keybindings (looking at column
2/3, regardless of whether the keybinding itself specifies Mode_switch)
and re-grab them.
That way, the keybinding “bindsym $mod+x nop foo” will work when
pressing $mod+x without Mode_switch and when pressing the corresponding
$mod+x (different key) with Mode_switch. A binding such as “bindsym
Mode_switch+$mod+x nop bar” will still have precedence.
The intention here is to make bindsym keybindings work well with dual
keyboard layouts (such as {dvorak, us} or {us, ru}), so that users can
switch between groups and still have their (logical) keybindings behave
the same way.
fixes#1775
Do not log an XCB_MOTION_NOTIFY event in handlers.c because this
clutters the log.
Only log in the motion notify handler if something important happens.
* common.mk: use -lsocket -liconv -lgen on Illumos/Solaris
* mkdirp: return int and accept a mode argument
* use i3's mkdirp on everything except Illumos
1. Allow to use the line continuation, which is indicated by \ before the new line character, in config files.
2. Add a new testcase "247-config-line-continuation.t" for
a). testing line continuation
b). making sure string escaping still works
c). testing line continuations within a string
b). testing line continuations with too many lines
If the match expression is a plain number (e.g., '99'), the number of a workspace will be compared strictly. Otherwise, the match expression is taken as a regular expression and compared against the workspace's name.
This allows all of the following:
for_window [workspace=5] ...
for_window [workspace="5:foo"] ...
for_window [workspace="foo"] ...
fixes#1769
Fix TODO in bindings.c.
There is no problem to use atoi here since either keycode 0 or button0 is invalid.
But strtol is more flexible and is recommanded for conversion.
The format string set with "title_format" can contain the placeholder "%title" which will be replaced with the actual window title.
By not overwriting window->name itself, we make sure that assignment matching still works as expected.
fixes#1723
Try to detect base 16 numbers given to `con_id` and `id` for command criteria
by setting the base of strtol to 0. This should also detect octal.
This is necessary because mouse bindings now may be serialized as hex as of
5c32de4.
The comment immediately following implied that this was the intended
behaviour. Not doing so means that compound commands that both move a
window to a new workspace as well as do something that depends on the
workspace's geometry (e.g. 'move position center' or 'floating enable'
on a tiled window) would use the workspace's calloc'd 0x0+0x0 geometry.
When InputHint is not in WM_HINTS (i.e., the flag is not set), treat the window
as if the InputHint was set (the default behavior). This means that i3 will
focus the window when it becomes managed.
fixes#1676
%p is equivalent to either %x or %lx, depending on the pointer size of the
platform. Before this commit, we always used %d, which has the same behavior
on Linux, but is not automatically expanded to %ld on e.g. FreeBSD.
fixes#1661
Check if the `connection` of the randr output is
XCB_RANDR_CONNECTION_DISONNECTED and disable the output if it is.
This fixes an issue where the output would not be disabled if the output was
physically unplugged from the machine.
The Makefiles should put binaries in $(EXEC_PREFIX) and
architecture-independent files in $(PREFIX). Also a user may have a
prefixed- pkg-config, as in the case of cross compiling on Exherbo
Linux, so respect the well-accepted $(PKG_CONFIG) variable for this
purpose.
Outputs may disappear momentarily and come back later.
To prevent i3 from exit when no output is available momentarily, add a timeout delay_exit_on_zero_displays.
We only support unique marks, so looping over all matched windows must be prevented.
If more than one window is matched, we reject it with an error message.
fixes#1614
Introduce a config directive "show_marks [yes|no]" to en- or disable drawing marks on window decorations.
To not change the look & feel of existing configurations, the default is "no".
If a window has a mark set, e.g., "example", it will be printed on the right side of the window decorations.
The format is "[example]" and the name of the window is truncated if necessary.
Marks starting with an underscore ("_") will be ignored.
When a window receives a _NET_ACTIVE_WINDOW message, it can steal the focus. This may not be preferable to all users.
With this directive, the user can choose from one of the following:
1) 'smart' - focus the container if its workspace is visible, otherwise set the urgency flag (default)
2) 'urgent' - always set the urgency flag, do not steal focus
3) 'focus' - always switch focus, never set the urgency hint
4) 'none' - ignore the request entirely (do not switch focus, nor set the urgency hint)
fixes#1426
This option allows toggling marks on a window without knowing whether the mark is already set or not.
It behaves as follows:
1) If the matched window has no mark, the new mark is set.
2) If the matched window has another mark, the old mark is removed and the new mark is set.
3) If the matched window already has the mark, the mark is removed.
The behavior that all non-matched windows have this mark removed is kept.
fixes#1463
1. Add a function writeall and make swrite wrap that function. Use either writeall or swrite, depending on whether we want to exit on errors or not.
2. Fix warnings when compiling with a higher optimisation level.
(CFLAGS ?= -pipe -O3 -march=native -mtune=native -freorder-blocks-and-partition)
Signed-off-by: hwangcc <hwangcc@csie.nctu.edu.tw>
When an urgent container is moved to another workspace, the urgency hint
1) is unset on the source workspace and
2) set on the target workspace
fixes#1187
Handle changes to the property _NET_WM_STRUT_PARTIAL by reallocating
screen space in the dock area when the dock client requests a new
position.
This will allow changes to the bar config directive `position` to be
effective on the `reload` command.
fixes#1294
This introduces a "separator_symbol" property for the i3bar configuration.
If set, the specified string will be used as a separator instead of a vertical line. Since it is an optional configuration, complete backwards compatibility is given.
fixes#1472
Otherwise, placeholder windows would accumulate these over restarts. The
worst part is that they don’t get dumped properly, meaning an empty
swallows specification ends up in the state, which matches any window,
so other random windows would be matched into the placeholder (e.g.
i3bar).
fixes#1502
This reverts commit cbd51ce664.
If you’ve started using this feature, I’m very sorry, but I think it’s
better to revert it entirely, as it will only cause more problems in the
future as more and more people upgrade and get bitten by this if we
didn’t revert it…
fixes#1536
When renaming a workspace on another output that moves the workspace to
the current output, the renamed workspace would be shown even though it
does not contain the focused container.
Explicitly show the focused workspace after the move. This is necessary
because `workspace_move_to_output` will show the workspace that is
moved.
Before this commit, placeholder windows had any matches that were
defined in the JSON file, _followed_ by an i3-internal match that
ensures the placeholder X11 window gets swallowed into the placeholder
i3 container.
The problem was that the first successful match was deleted, and if
users specified a criterion (title=IPython) that matched the placeholder
window itself (name=IPython), then that match is deleted and the
i3-internal match is kept. This results in the actual window the user
wants to match not being swallowed, and the placeholder window not
displaying any criteria.
fixes#1526
If the mouse cursor is hidden (by unclutter, for example), then scrolling
in the window decoration creates an event with a child
(i.e. event->child != XCB_NONE). This causes route_click() to be called
with dest=CLICK_INSIDE, which prevents scrolling through a stacked layout.
To fix this, check if a click is in the window decoration _before_
checking if the event has a child.
Not quite sure why there are so many differences. Perhaps we’ve gotten
out of the habit of running clang-format after every change.
I guess it’d be best to have a travis hook that runs clang-format for us
and reports any problems on pull requests.
input_code is a uint16_t, but xcb_keycode_t is uint8_t, meaning that
only the first byte of input_code is inspected by memmem. On
little-endian platforms, this code would have worked by accident, since
the first byte of input_code represents the 8 least significant bits.
However, on big-endian platforms the first byte is the 8 most
significant bits, which means memmem is scanning bind->translated_to
for the wrong keycode (probably 0).
In order to work correctly on big-endian and little-endian platforms,
simply typecast input_code to an xcb_keycode_t and pass that to memmem.
The observed behaviour associated with this bug is that key bindings
don't work at all. This patch has been tested on an iBook G4 running
OpenBSD -current, and key bindings work properly with this fix applied.
Add support for the _NET_WM_MOVERESIZE client message. This message
enables clients to initiate window moving or resizing. Toolkits like
Gtk3 use this message when the user drags a client-side decorated window
by its title bar. When Gtk detects that the window manager does not
support this client message, it uses a slow fallback implementation.
fixes#1432
Add the `--whole-window` switch for mouse bindings. This switch controls
what part of the container the pointer must be over to trigger a mouse
binding. The default is to only trigger mouse bindings over the
titlebars. With this switch, a mouse binding will be triggered over the
main part of the window as well.
This is a breaking change to the previous behavior, which would trigger
a mouse binding with a modifier over any part of the window.
fixes#1429
Since this commit:
f691a55923
the shell that is used is the system's bourne shell (/bin/sh) and the
env variable SHELL is not considered.
No logic changes.
Send the affected workspace in the "current" property for each workspace
event for any type of workspace event that affects a particular
workspace.
fixes#1411
Rather than just toggling the fullscreen modes, allow to set them
directly with:
fullscreen enable|toggle [global]
fullscreen disable
For compatibility, retain the previous command and its toggling behavior:
fullscreen [global]
fixes#1120
Copy the binding struct before running it and use this copy to emit the
binding event.
This fixes a crash when the command `reload` is used in a binding when
the binding event is emitted.
When dumping a binding, as is done during the binding event, check
symbol for NULL. If it is, dump json null. This prevents a crash when
running a binding that was configured with bindcode.
fixes#1379
The binding event will be triggered when a binding is run as a result of
some a user action. The binding event has the following properties:
change: (str) Currently this will only be "run" but may be expanded in
the future. Included for consistency with other events.
binding: (map) the serialized binding
The "binding" member will have these properties:
input_type: (str) either "keyboard" or "mouse"
input_code: (int) the xcb keycode of the keyboard binding if it was
provided or the mouse button if it is a mouse binding.
symbol: (str) the string representation of the input code
command: (str) the bound command
mods: (list of str) a list of the modifiers that were pressed as string
symbols
fixes#1210
Rectangles passed to function xcb_poly_fill_rectangle are of type
xcb_rectangle_t and defined as:
struct xcb_rectangle_t {
int16_t x;
int16_t y;
uint16_t width;
uint16_t height;
}
The rectangles for the right and lower border had a width and height,
respectively, greater than the actual border width.
Furthermore, offset the bottom border to not overlap with the right one
and, for the top border, use r->width instead of con->rect.width as with
the other borders.
When a named workspace (i.e., a workspace that has a name that does not
begin with text that can be parsed as an integer greater than or equal
to zero) is represented by the ipc as a workspace json object such as
can be queried with `i3-msg -t get_workspaces`, set the num property to
-1 instead of json null.
This is for convenience of ipc consumers using type-constrained
languages such as C which have difficulty cleanly expressing nullable
integers.
fixes#1368
Do not set focused_id to XCB_NONE in route click to force resend focus,
in some cases to an already focused window.
Sending focus again on click is not necessary and may cause problems
with certain wine or mono apps. Resending focus makes combo boxes not
work in Office 2010.
This effectively reverts commit 250577da, so in case this commit causes
any problems with Eclipse to resurface, we’ll revert this commit in
favor of 250577da (the Eclipse-related bug fix).
We're going to call parse_configuration() very early if -C is given on
the command line. Instead of the previous "only_check_config", which has
been a global variable, we now simply pass use_nagbar as false if we're
just validating.
This causes the whole parsing to run without X and of course without
starting nagbar and displaying the errors to standard out/error instead.
The return code of parse_configuration() is now a boolean which
represents whether an error occured during parsing and the programs exit
code is returned accordingly.
Although the config parser still has a lot of side-effects, we now can
parse without the need to have an XCB connection. A nicer implementation
would be to just set the new font and load it just after we're done
parsing, but to ensure we don't break functionality we just load a dummy
FONT_TYPE_NONE if XCB isn't available. The main reason for going this
route is that it's a bit difficult to test fonts in a distribution
agnostic way without bundling fonts with i3 (or Xdummy to be more
exact).
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
In normal border style, two horizontal lines are drawn to outline the
bar decoration. The lower line leaves a gap to the left and right to
align with the border. This gap was hardcoded to 2 pixels. Now it
matches the current border width, if any.
In stacked layout, only the bottommost bar is aligned. In tabbed layout,
no gaps are left in order to close the outline and make the notion of a
tab more clear.
Raise a window when cycling focus between floating windows with `focus
[direction]` command so that newly focused windows are rendered on top
of other windows.
This is done by placing the window last in the floating nodes of the
parent and reordering the stack so the relative order is preserved.
fixes#1322
I think this is not a good feature to have. It shouldn’t be necessary
for a tiling window manager that explicitly discourages the use of
floating windows.
fixes#1324
http://tronche.com/gui/x/icccm/sec-4.html
> The WM_CLASS property (of type STRING without control characters)
> contains two consecutive null-terminated strings. These specify the
> Instance and Class names to be used by both the client and the window
> manager for looking up resources for the application or as identifying
> information.
i3 processes changes to WM_CLASS by updating the cached property and
running assignments. This allows the property to be used in criteria
selection.
fixes#1052
When a window becomes managed, explicitly set the current border width
to the default instead of relying on the default value of -1 to apply
the correct value.
Now that there are two different kinds of default borders, a border
width value of -1 is ambiguous. This can lead to different border widths
effectively being applied when the container changes from tiling to
floating, which is surprising behavior.
This commit extends behavior introduced in this commit to normal
borders:
7afe9cc78b
Explicitly set current border width when BS_PIXEL
fixes#1304
Users can specify a command to run when a button was pressed on i3bar to
override the default behavior. Currently only the mouse wheel buttons
are supported. This is useful for disabling the scroll wheel action or
running scripts that implement custom behavior for these buttons.
Example:
bar {
wheel_up_cmd nop
wheel_down_cmd exec ~/.i3/scripts/custom_wheel_down
}
fixes#1104
Fixes a bug where a normal floating default border is not applied when
the default tiling border is set to a pixel value.
This bug was introduced in this commit:
43b447855d
Consider motif border for floating geometry
Fixes a comment that claimed default floating border could override
motif hints, which was never the case.
fixes#1305
This reverts commit b109b1b20d.
Turns out the change in behavior was unexpected by a number of users, so
let’s revert it and make those users that want this behavior configure
it explicitly.
Sorry for the back-and-forth here.
When a window becomes managed, if the config specifies a pixel border
style, explicitly set the current border width so it does not change
when the container changes from tiling to floating.
fixes#1266
http://tronche.com/gui/x/icccm/sec-4.html#s-4.1.4
> IconicState - The client's top-level window is iconic (whatever that
> means for this window manager). The client can assume that its
> top-level window is not viewable, its icon_window (if any) will be
> viewable and, failing that, its icon_pixmap (if any) or its
> WM_ICON_NAME will be displayed.
For these requests, we just close the window.
fixes#1279
When calculating the geometry of a floating window with motif hints that
specify a border style, take into account that this window will have a
different border style when calculating its position with
floating_enable() when the window becomes managed.
A nice side effect of this is that users can override motif hints with
`new_float` config directives when they are specified other than
`normal`.
fixes#1270
Maintain the _NET_DESKTOP_NAMES property on the root window.
http://standards.freedesktop.org/wm-spec/latest/ar01s03.html#idm140251368131760
> _NET_DESKTOP_NAMES
>
> _NET_DESKTOP_NAMES, UTF8_STRING[]
>
> The names of all virtual desktops. This is a list of NULL-terminated
> strings in UTF-8 encoding [UTF8]. This property MAY be changed by a
> Pager or the Window Manager at any time.
A window may become unmapped on manage when an assignment command unmaps
the window, such as moving it to the scratchpad or killing it.
This can cause i3 focus to be an unmapped window and different than X
focus which can lead to complications
fixes#1283
If a `workspace {N}` or `move to workspace {N}` command is given with N
as a plain number, the workspace of this number is selected for the
context of the command if one exists and there is no workspace with a
name that exactly matches N.
A container selected with criteria should be moved with the `move
[direction]` command, instead of this command always acting on the
focused container.
This removes our last dependency on Xlib! :)
(Okay, an Xlib dependency still comes in through other libraries that we
link against, but it’s not us. Our code is simpler by this change and
uses one less connection to X11.)
A configured mouse binding (for example `bindsym button3 kill`) runs
its command when the mouse button is pressed over parts of a container.
If the binding has no modifer, it will only run when the button is
clicked on the window titlebar.
Otherwise if the binding has a modifier, it will run over the titlebar
or any part of the contained window.
fixes#558
http://tronche.com/gui/x/icccm/sec-4.html#s-4.1.7
> Clients using the Globally Active model can only use a SetInputFocus request
> to acquire the input focus when they do not already have it on receipt of one
> of the following events:
> * ButtonPress
> * ButtonRelease
> * Passive-grabbed KeyPress
> * Passive-grabbed KeyRelease
Since managing a window happens on a MapNotify (which is absent from this
list), the window cannot accept input focus, so we should not try to focus
the window at all.
Fixes an issue with xfce4-notifyd which (correctly) declines focus when
we send WM_TAKE_FOCUS, which puts i3 in a state where i3 focus and X
focus are different when a notification appears.
_NET_NUMBER_OF_DESKTOPS:
> This property SHOULD be set and updated by the Window Manager to
> indicate the number of virtual desktops.
We interpret this property as the number of noninternal workspaces.
This should be the last commit that formats a big bunch of files. From
here on, whenever I merge patches, I’ll run clang-format like described
in the title.
This has multiple effects:
1) The i3 codebase is now consistently formatted. clang-format uncovered
plenty of places where inconsistent code made it into our code base.
2) When writing code, you don’t need to think or worry about our coding
style. Write it in yours, then run clang-format-3.5
3) When submitting patches, we don’t need to argue about coding style.
The basic idea is that we don’t want to care about _how_ we write the
code, but _what_ it does :). The coding style that we use is defined in
the .clang-format config file and is based on the google style, but
adapted in such a way that the number of modifications to the i3 code
base is minimal.
I consider this behavior broken and not respecting the standard, but it
happens in real life, and it’s better for i3 to not busy-loop in such a
situation :).
fixes#1259
When `focus_follows_mouse` option is on, prevent an uneeded render on
pointer enter when the con is already focused.
This pointer enter might be caused by entering a window decoration of an
already-focused container.
This extra render can cause concurrency issues when focus is set
asynchronously with WM_TAKE_FOCUS.
Add run_binding function to bindings.h.
> Runs the given binding and handles parse errors. Returns a
> CommandResult for running the binding's command. Caller should render
> tree if needs_tree_render is true. Free with command_result_free().
_NET_ACTIVE_WINDOW:
> The window ID of the currently active window or None if no window has
> the focus.
This fixes a bug that would not update _NET_ACTIVE_WINDOW when focus
changed to an i3 container without a window such as a branch or
workspace content container.
parse_command returns a struct that contains useful information about
the result of a command as a whole (instead of the intermediate
representation used during parsing).
parse_command now requires the caller to allocate the yajl_gen used for
generating a json reply. This is passed as the second parameter to
parse_command. If NULL is passed, no json reply will be generated.
This patch adds a new configuration option "mouse_warping [output|none]".
When mouse warping is disabled, mouse cursor does not jump to middle of current
screen when changing workspaces between multiple outputs. This introduces a
"special" cursor state, where focus is in one window and cursor on another.
Useful for eg. scrolling a web page with mouse wheel while typing into another
window on keyboard.
Workspace assignments with bare numbers assign all workspaces with that
number to the specified output.
Workspace assignment by number is overridden by workspace assignment by
name.
Change the name of structs CommandResult and ConfigResult to
CommandResultIR and ConfigResultIR to show they are an intermediate
representation used during parsing.
Floating windows already had their own border style, but the width was
the same for all windows.
The configuration directives 'new_window' and 'new_float' can now be
used simultaneously to have different border widths for floating and
tiled windows.
fixes#1244
Implement the configuration option within the bar config directive for
custom workspace numbers with the directive `strip_workspace_numbers
yes`.
This directive strips the workspace name of the number prefix and
delimiter. When the workspace name consists only of the number, it will
default to show the number.
For example:
* "2:5" -> "5"
* "4:$" -> "$"
* "8" -> "8"
This allows customization of i3bar for alternate ordering of workspaces
which has a legitimate use for alternate keyboard layouts such as
Dvorak.
fixes#1131
Allow client requests of type _NET_ACTIVE_WINDOW to switch workspaces if
they indicate they are a pager. Otherwise, set the urgency hint on that
con to indicate that something happened.
This allows task switchers like skippy-xd to work properly.
http://standards.freedesktop.org/wm-spec/latest/ar01s03.html#idm140251368127856
Change the primary binding accessor to `get_binding_from_xcb_event`.
This function gets a binding from a generic xcb event of type KeyPress,
KeyRelease, ButtonPress, or ButtonRelease by determining the input type
(keyboard or mouse), the modifiers pressed from the filtered event
`state`, managing the proper fall back in case mode switch is enabled,
and finally querying the bindings for a binding that matches the event.
The logic of querying keyboard bindings is not intended to be altered by
this change.
The general accessor has been slightly modified to work with mouse
bindings and made private because it is only used in bindings.c
http://standards.freedesktop.org/wm-spec/latest/ar01s03.html#idm140251368149456
The _NET_CLIENT_LIST property of the root window:
> These arrays contain all X Windows managed by the Window Manager.
Dock clients are not managed windows, so they should not be included in
_NET_CLIENT_LIST or _NET_CLIENT_LIST_STACKING.
Workspaces won't work properly if they start with "__", so reserve that
namespace altogether. Disallow renaming workspaces to reserved namespace
and using reserved namespace in configuration.
Fixes#1209.
The fullscreen_mode event is a window with the "change" property set to
"fullscreen_mode". This event should be emitted whenever a window enters
or exits fullscreen mode.
This event can be used to turn off dpms off when a window is fullscreen
or display the fullscreen container name in the status line for
instance.
Send all the options in the bar block on the barconfig_update event.
This will eventually allow for dynamically updating bar colors with the
`reload` command.
Do not handle click events on dock clients because they are not managed
windows. Dock clients are responsible for sending the message to i3 to
focus a workspace if that is appropriate. i3bar now sends the message to
focus the correct workspace when that is appropriate.
Otherwise, it could interfere with the dock clients own click handling,
which could be an action to focus a different workspace than i3 had
assumed, such as would be the case with a workspace widget.
The log message at the top of ipc_send_window_event would segfault when
no xcb window is present, such as for a split container.
The log now shows the con id which is more relevant anyway.
If a `bindsym` config directive specifies a symbol beginning with
"button", the binding will be given the type B_MOUSE for the indicated
button number.
Example:
bindsym $mod+button2 exec echo 'button two'
This will be interpreted as having input code (now `keycode`) 2 and type
B_MOUSE.
The mechanism to find and run mouse bindings on mouse events is not
implemented.
When checking the window type for a resize command, first check to see
if the window property is null before checking whether or not it is a
dock window. The window may be null in the case it is a branch
container.
fixes#1220
This commit:
commit fb6d117c42
Author: Axel Wagner <mail@merovius.de>
Date: Thu Dec 30 21:09:32 2010 +0100
Port sighandler to tree-branch
blocks SIGPIPE. Unfortunatelly blocked signal set is preserved accross
execve()s, so any program executed by i3 inherited blocked SIGPIPE signal.
This leads to courious effects when pipe writer does not terminate after
exiting pipe reader.
Simple reproducer is to spawn a new xterm by a key shortcut and then run this
command there:
$ perl -e 'print $SIG{PIPE}, qq{\n}'
IGNORE
fixes#1237
If input focus is set by the window manager, it is not necessary to send
WM_TAKE_FOCUS because it has already taken focus.
http://tronche.com/gui/x/icccm/sec-4.html#s-4.1.7
> The goal is to support window managers that want to assign the input
> focus to a top-level window in such a way that the top-level window
> either can assign it to one of its subwindows or can decline the offer
> of the focus. For example, a clock or a text editor with no currently
> open frames might not want to take focus even though the window
> manager generally believes that clients should take the input focus
> after being deiconified or raised.
Both setting input focus and sending WM_TAKE_FOCUS is effectively
setting focus on the window twice which is certainly against the spirit
of the spec, if not the letter.
fixes#1167
Add and update the _NET_CLIENT_LIST property on the root window to
better comply with ewmh standards.
Information on this property can be found here:
http://standards.freedesktop.org/wm-spec/latest/ar01s03.html
> These arrays contain all X Windows managed by the Window Manager.
> _NET_CLIENT_LIST has initial mapping order, starting with the oldest window.
fixes#1099
Otherwise, we read random garbage. Found by the testsuite due to
t/185-scratchpad.t failing because a window was incorrectly recognized
as a floating window.
According to 4.1.7 of the iccm spec
http://tronche.com/gui/x/icccm/sec-4.html#s-4.1.7
> Windows with the atom WM_TAKE_FOCUS in their WM_PROTOCOLS property may
> receive a ClientMessage event from the window manager (as described in
> section 4.2.8) with WM_TAKE_FOCUS in its data[0] field and a valid
> timestamp (i.e. not CurrentTime ) in its data[1] field.
Adds the timestamp parameter to send_take_focus to avoid the dangerous
use of a global variable.
This memory leak is related to matching on con_id or matching when the
container has a null window. In that case, windows that do not match
would leak the owindow struct.
This memory leak is associated with matching by a criteria that uses a
regular expression. Without freeing a regex before calling match_init,
it will definitely be lost.
cmd_resize does not implement a method to resize dock clients.
A command like `[instance=".*"] resize grow width 160 px or 16 ppt`
when a dock client matched would crash i3.
fixes#1201
Windows that match the following criteria are floated by default:
- dialog, utility, toolbar, or splash windows,
- modal windows, or
- windows that have specified equal minimum and maximum size.
closes#1182
The function ipc_recv_message in libi3 allocates memory to the location
of the `message` reply in src/ipc_receive_message.c with malloc and must
be freed.
This memory leak was found using valgrind.
Rename `get_binding` to `get_keyboard_binding` and ensure that this
function only accesses bindings of type B_KEYBOARD. Other types of
bindings (e.g. mouse bindings) will be accessed by a different function.
This patch fixes ticket #1168 to extend the window IPC event mechanism
to send IPC events for window focus and title changes. The newly added
window events use the same format as the already established "new"
event.
Specifically this patch:
* Moves the ipc_send_window_event() function from src/manage.c into
src/ipc.c and adds an argument for the change property of the event
* Updates src/manage.c to use the new function signature. To ensure
that the "new" event does not send the same event data as the
"focus" event, setting focus now happens after the "new" event
has been sent
* Adds IPC focus event notification to src/x.c. To workaround a problem
during window close when accessing the window name, a function has been
added to query whether a window is actually attached to its parent. To
avoid obsolete focus notification, a new field has been added to keep
track of the focus without any interference by the click handling
* Adds IPC title event notification to src/handlers.c. To avoid
obsolete title notification, a function has been added to determine
whether a window title has actually changed
* Updates the IPC documentation to include the new events
* Updates testcases/t/205-ipc-windows.t to include the "focus" event
in order to ensure the correct event sequence
* Adds two new unit tests, b/testcases/t/219-ipc-window-focus.t and
b/testcases/t/220-ipc-window-title.t to ensure proper "focus" and
"title" events
The X11 protocol description states:
The window the event is reported with respect to is called the event
window. The event window is found by starting with the source window
and looking up the hierarchy for the first window on which any client
has selected interest in the event.
For the case of urxvt with URxvt.internalBorder > 0, urxvt sets up a
subwindow for its actual contents that is placed “in the middle” of the
urxvt window. In terms of the X11 protocol, the source window is urxvt’s
window, but urxvt does not select ButtonPress events for that.
Therefore, X11 will go up in the hierarchy and deliver the event to i3
for i3’s window decoration, even though this was not actually a click on
the decoration, but into the managed window.
Therefore, we check whether child != XCB_NONE for clicks on window
decorations and then handle them as a click inside the window.
fixes#1176
Calls ewmh_update_current_desktop on startup to set the
_NET_CURRENT_DESKTOP property. Without this change the property only
gets set after the workspaces have been manipulated. Also exclude
hidden workspaces (i.e. those starting with "__" from the workspace
index.
Adds tests for startup and workspace switching.
The pixmap of a borderless leaf container will not be used except
for the titlebar in a stack or tabs.
Make sure these containers do not (really) have a pixmap because it can
only get in the way.
fixes#1013
Create files bindings.[ch] to contain functions for configuring,
finding, and running bindings.
Use the new function `configure_binding` for binding configuration. This
function adds a binding from config parameters.
Export the function `modifiers_from_str` from config_directives.h.
This change is made in preparation for the new bindmouse functionality.
The pixmap of a borderless container will not be used (except for the
titlebar in a stack or tabs). Make sure these containers do not have a
pixmap because it can only get in the way.
fixes#1013
When the _MOTIF_WM_HINTS property of a window specifies it should have
no title bar, or no decorations at all, respond by setting the border
style of that container to BS_PIXEL or BS_NONE respectively.
This comes from the old Motif window manager. It was originally intended
to specify exactly what sort of decorations a window should have, and
exactly what sort of user input it should respond to. The EWMH spec
intended to replace Motif hints with _NET_WM_WINDOW_TYPE, but it is
still in use by popular widget toolkits such as GTK+ and Java AWT.
i3's implementation simply mirrors Gnome's Metacity. Official
documentation of this hint is nowhere to be found.
For more information see:
https://people.gnome.org/~tthurman/docs/metacity/xprops_8h-source.htmlhttp://stackoverflow.com/questions/13787553/detect-if-a-x11-window-has-decorationsfixes#832
Make sure the command `move <direction>` properly sends the workspace
focus ipc event required for i3bar to be properly updated and redrawn.
Make `ipc_send_workspace_focus_event publicly available from ipc.h for
more flexible event sending.
Change the behavior of movement into a branch with respect to the
position the moving con will be placed within the branch when the
movement is complete.
The correct position is determined by the direction of movement or the
position of the focused-inactive container within the branch.
If the direction of movement is the same as the orientation of the
branch container, append or prepend the container to the branch in the
obvious way. If the movement is to the right or downward, insert the
moving container in the first position (i.e., the leftmost or top
position resp.) If the movement is to the left or upward, insert the
moving container in the last position (i.e., the rightmost or bottom
position resp.)
If the direction of movement is different from the orientation of the
branch container, insert the container into the branch after the
focused-inactive container.
fixes#1060
Ingo Bürk