bbfbd28dfa
Add a --no-startup-id flag for exec (command), exec (config), exec_always (config)
2011-10-25 22:18:17 +01:00
726f2a1e5a
normalize file headers across **/*.{h,c}
2011-10-25 21:19:38 +01:00
8660ae4e12
bar config: fall back to the i3 font (Thanks pl)
2011-10-25 20:50:57 +01:00
d490bae8a2
Close empty workspaces if they're not visible.
...
Previously, we'd only close an empty workspace when we moved away
from it. Now we also close it when the last client exits, as long
as that workspace is not visible anymore.
2011-10-24 00:12:14 +01:00
a58018cf66
Add libi3/load_font, use it everywhere
...
…except for i3bar, which needs slightly more information about the font
2011-10-23 22:37:11 +01:00
6d01d37b03
remove unused cached_fonts TAILQ
2011-10-23 22:03:20 +01:00
8da6049ca9
Actually make load_font only fallback if 'fallback' is true
2011-10-23 22:02:11 +01:00
3e7f941b83
Fix comment in run_assignments (Thanks xeen)
2011-10-23 21:45:12 +01:00
91134f75c0
Move get_mod_mask to libi3, use it in i3 and i3-config-wizard
...
Also, the API changed a bit. There are two functions now, both assume you
already got the keysyms (which is the case for i3 and i3-config-wizard),
one gets the modifier mapping for you (aio_get_mod_mask_for) while the other
assumes you also got that. No roundtrips are required for the latter.
2011-10-23 21:26:15 +01:00
a512b99a51
Introduce --get_socketpath and --force_xinerama as synonyms for --get-socketpath and --force-xinerama
2011-10-23 19:41:40 +01:00
6dc6ba11fc
Eliminate xcb_change_gc_single everywhere with C99
2011-10-23 18:06:25 +01:00
9eda7fb6fb
move strndup to libi3
2011-10-23 18:02:01 +01:00
ada4857ad2
Fix colors in i3bar (Thanks julien)
...
i3bar previously used get_colorpixel on strings without the leading # (ff0000
instead of #ff0000). Since it uses libi3’s get_colorpixel now we needed to
update a few places.
2011-10-23 17:48:44 +01:00
cb9bbcfccf
Move get_colorpixel to libi3, use it everywhere else
2011-10-23 17:38:21 +01:00
31cb3dda8d
cfgparse: use different literal strings for ambiguous keywords in bar context
2011-10-23 16:41:23 +01:00
9d15a00ba8
introduce sasprintf() in libi3, use it everywhere
2011-10-23 13:16:56 +01:00
10d3281b0f
remove/shorten a lot of debugging messages
...
Some of them are useless nowadays, others very unlikely to be a problem.
Those which might still be interesting somewhen in the future are just
commented out.
2011-10-23 00:15:13 +01:00
42d355f2b7
normalize modelines/headers across src/*.c
2011-10-22 23:40:02 +01:00
753d67fb64
migration from exec i3bar to bar config: i3 substitutes exec with a bar block, shows nagbar
2011-10-22 16:33:00 +01:00
9b84348201
Bugfix: fix off by one when copying the hex colorcode (Thanks fernandotcl)
2011-10-21 23:22:48 +01:00
77961ad9c8
cfgparse: Don’t use asprintf when parsing hex colors
2011-10-21 23:09:57 +01:00
3baeeb1834
Bugfix: properly transition in and out of the COLOR_COND state (Thanks fernandotcl)
2011-10-21 22:58:53 +01:00
caee0a0fda
cfgparse: eliminate absolute states, use yy_push_state/yy_pop_state
...
This fixes a problem with workspace assignments.
I tested i3 -C with three user configs (Thanks SardemFF7, julien, xeen)
and did not notice any problems.
2011-10-20 22:38:46 +01:00
12d866e4f6
Don’t start i3-nagbar when using -C to validate the config
2011-10-20 22:25:59 +01:00
230b238870
Actually start i3bar instances for each configured bar
2011-10-20 19:03:40 +01:00
ad0f13a0a9
Clean bars before reloading the config (+test)
...
While the configuration gets updated in i3, the i3bar processes will not pick
up these changes. We have to think about a good way to do that.
2011-10-20 18:47:09 +01:00
15bface10d
Create different IDs for each bar (+test)
2011-10-19 19:57:39 +01:00
063b124e35
Implement parsing bar {} config blocks
2011-10-18 22:16:04 +01:00
149b05aacf
ipc: when requesting the bar config without a payload, return an array of available bar IDs
2011-10-18 22:12:46 +01:00
e3cbdea1fc
Bugfix: Correctly close the colors map in the IPC bar config reply
2011-10-18 22:11:44 +01:00
c2c6ca25d5
Make the barconfig list a TAILQ
2011-10-18 22:11:27 +01:00
24ede1c834
add an IPC request to get the bar configuration (by ID)
2011-10-18 19:05:49 +01:00
4898f78e5e
add a data structure for 'bar' configuration
2011-10-18 19:05:49 +01:00
9d67ae2202
Focus new window only if it is on a visible workspace on the current focused output.
2011-10-18 18:56:39 +01:00
a506e59b3c
Bugfix: Fix segfault when starting i3 (Thanks pnutzh4x0r)
2011-10-18 18:47:07 +01:00
f09d9a4c37
log: use localtime_r instead of localtime
...
localtime_r does not have the side-effect of behaving like it called tzset(),
in particular it will save one stat(/etc/localtime) syscall. This is not a big
deal, but it makes the strace output cleaner and thus more useful :).
2011-10-18 18:32:47 +01:00
178be03fa6
Implement 'workspace back_and_forth' (Patch by Michael Walle)
2011-10-17 23:17:56 +01:00
914ca6cfe7
Bugfix: Use _exit in forking to avoid calling the libev cleanup handler (Thanks xeen)
2011-10-15 16:56:47 +01:00
32b97745ec
Don’t call ev_destroy_loop with ev < 4 in atexit (Thanks xeen)
2011-10-15 16:56:32 +01:00
5f52c78aa0
Change the root window cursor to 'watch' during startups
2011-10-10 15:54:18 +01:00
2ad4fbb34a
startup: delete the startup sequence upon completion, make the timeout complete it
2011-10-10 15:54:18 +01:00
997a539a8a
Implement timeouts for startup notifications
2011-10-10 15:54:17 +01:00
6ac098a45e
support _NET_STARTUP_ID on the client leader window
...
(necessary for GIMP, geeqie, …)
2011-10-10 15:54:17 +01:00
4204b8e2b0
Get the _NET_STARTUP_ID in manage_window, get the corresponding workspace
2011-10-10 15:54:17 +01:00
499d89bdb0
Keep track of startup notifications in a TAILQ, save workspace
2011-10-10 15:54:17 +01:00
f4f4d782bb
implement a startup monitor, move code to src/startup.c
2011-10-10 15:54:17 +01:00
c812cdcf9a
make handle_client_message not return anything
...
The function returned an int for historical reasons.
2011-10-10 15:54:17 +01:00
d1d4f39f9e
save the last timestamp received by X11 in last_timestamp
...
We need it for startup notifications (to generate a unique id)
Conflicts:
include/i3.h
src/main.c
2011-10-10 15:54:17 +01:00
b9db72dc8a
Implement support for startup notifications
...
This only sets up startup notifications for the 'exec' commands and directives.
Monitoring startups follows later.
2011-10-10 15:54:17 +01:00
2a29d9c2c1
Make conn_screen available outside of main()
...
Will be used in other parts of the code for startup notification
2011-10-10 15:54:17 +01:00
0f74f9b921
remove left-over type definition for mode_info
2011-10-09 18:25:21 +01:00
18991a65c7
log WM_NAME (non-utf-8 window titles)
2011-10-09 14:45:34 +01:00
29c185dd0b
Move fake_configure_notify to libi3
2011-10-09 13:40:15 +01:00
658bf5adff
Bugfix: Warp pointer to the correct window when using the 'focus' command
...
Comment in the code makes the fix clear, I think.
Steps to reproduce the issue:
1) On the right monitor, open two terminals (h-split workspace)
2) 'i3 mark foo' on the right terminal
3) Focus the left terminal
4) Switch to the left monitor
5) i3 '[con_mark="foo"] focus'
6) the left window will contain the pointer (and is focused for a short period
of time, or even permanently due to race conditions)
2011-10-03 21:54:36 +01:00
1eab86b916
add "move workspace next" and "move workspace prev"
...
some factorization would be better here, however I don't really know my
way around bison
2011-10-02 22:03:47 +01:00
b2ad9a77c8
rename the internal function to _workspace_show, add a comment to workspace_show_by_name
2011-10-02 22:03:16 +01:00
92cc4494aa
refactor workspace_show and friends
2011-10-02 21:57:00 +01:00
b755397687
Make i3 send arguments as command to a running i3 instance (like i3-msg)
...
From i3 --help:
If you pass plain text arguments, i3 will interpret them as a command
to send to a currently running i3 (like i3-msg). This allows you to
use nice and logical commands, such as:
i3 border none
i3 floating toggle
i3 kill window
2011-10-02 19:20:43 +01:00
4243a4053e
Cleanup i3 --help
2011-10-02 18:55:15 +01:00
046cf99585
Move ipc_send_message and ipc_recv_message to libi3
...
Make i3-msg and src/ipc.c use it
2011-10-02 18:33:36 +01:00
501dc36b98
move sstrdup, scalloc, smalloc, srealloc to libi3, improve error messages
2011-10-02 18:09:30 +01:00
23796ea900
Implement i3 --get-socketpath, useful for IPC scripts
...
In order to not depend on X11 just for getting the socket paths, scripts or
other programs can now use i3 --get-socketpath. Since i3 must be present on the
computer anyways, this saves one dependency :).
2011-10-02 16:12:10 +01:00
679bceccc4
remove obsolete comment
2011-10-02 13:18:12 +01:00
0482dc7546
Merge branch 'master' into next
2011-10-01 17:44:46 +01:00
8adcf3e5d1
set close-on-exec flag on errorlogfile
...
Make sure the file descriptor is closed within the child after forking.
Signed-off-by: Michael Walle <michael@walle.cc>
2011-10-01 17:44:22 +01:00
3629934b0a
Check for PCRE version and disable PCRE_UCP for <= 8.10
2011-09-30 20:31:32 +01:00
db33da2258
Merge branch 'master' into next
2011-09-26 20:12:07 +01:00
abaa8c2356
Bugfix: IPC: Correctly dump the 'focus' array
2011-09-26 20:11:47 +01:00
6420b2b102
Introduce the i3-sensible-{pager,editor,terminal} scripts
...
The former two provide fallbacks in case $PAGER or $EDITOR is not set (which
might be more common than you think, because they have to be set in
~/.xsession, not in the shell configuration!) while the latter tries to launch
a terminal emulator. The scripts are most prominently used in i3-nagbar, which
alerts the user when the configuration is broken for some reason. Also,
i3-sensible-terminal is used in the default configuration.
This commit does not rely on the shell supporting ${PAGER:-less} anymore, which
is not the case for 'fish'.
2011-09-25 18:46:37 +01:00
1481cd95c9
Implement the I3_SYNC client protocol
...
This is mainly useful for the testsuite. The tests can wait until i3 processed
all X11 events and then continue. This eliminates sleep() calls which leads to
a more robust and faster testsuite.
2011-09-22 23:13:12 +01:00
daebe28b09
Merge branch 'master' into next
2011-09-22 23:11:14 +01:00
0c367f9e4c
Skip dragging of floating cons in fullscreen mode
2011-09-22 23:10:48 +01:00
1717b88174
Merge branch 'master' into next
2011-09-22 20:11:44 +01:00
4dbda73114
Bugfix: Correctly revert focus to other floating windows when closing a floating window
...
Uncovered by the testsuite \o/
2011-09-22 20:10:51 +01:00
143663f031
Merge branch 'master' into next
2011-09-20 22:37:08 +01:00
77ae3cd8f7
Bugfix: use bufcopy instead of buf when boundary checking (Thanks thomasba)
...
Also replace the useless (bufcopy + (next - bufcopy)) with next
2011-09-20 22:36:23 +01:00
de7c2841ed
Merge branch 'master' into next
2011-09-20 21:42:51 +01:00
cd6c3fedcb
A bit more boundary-checking when replacing variables.
...
Makes valgrind happy
2011-09-20 21:42:26 +01:00
e1949aa694
Bugfix: Correctly split key/value when parsing variables (Thanks xeen)
2011-09-20 21:42:09 +01:00
5aa43d61f8
Add force_xinerama configuration option
...
The configuration option does the same as the commandline parameter, except
it can be easily set by the user (e.g. you are using KDM and can't start a
session through ~/.xsession).
Signed-off-by: Michael Walle <michael@walle.cc>
2011-09-19 23:10:38 +01:00
05c0a8985b
Merge branch 'master' into next
2011-09-18 17:44:00 +01:00
2fe0949abd
Bugfix: Only change focus in tree_close() when the container was focused before
...
Fixes : #441
I’m not sure if that’s really all there is to it. Seems a bit too simple :).
We’ll see if I missed some corner cases in the next few days…
2011-09-18 17:43:02 +01:00
46409ad656
Merge branch 'master' into next
2011-09-18 17:02:52 +01:00
a82f5750de
Bugfix: Avoid out of bounds coordinates when moving floating windows (Thanks eeemsi)
...
This commit makes the coordinates proportional when moving floating windows.
That is, if you have a window at the bottom of your 1920 px monitor and move it
to your 800 px monitor, it will be at the bottom of the 800 px monitor (and not
out of bounds).
2011-09-18 17:00:29 +01:00
b3adaa2983
Implement the window_role criterion (checks WM_WINDOW_ROLE)
...
Closes : #446
This is handy for matching specific windows of a multi-window application, for
example only Pidgin’s buddy list window.
2011-09-18 16:05:10 +01:00
c88425147e
Merge branch 'master' into next
2011-09-18 14:39:33 +01:00
7a2e92a116
Bugfix: Use con_orientation(). Fixes switching between different outputs
...
Fixes : #518
For stacking containers, direct access using con->orientation is wrong, we need
to use con_orientation().
2011-09-18 14:38:39 +01:00
0bc44ffc37
Merge branch 'master' into next
2011-09-18 00:40:42 +01:00
a5012f6021
fix-bug-515: always adjust floating position when moving to another output
...
Floating con position needs to be adjusted when moving to another
output, regardless of whether or not the target workspace is visible.
2011-09-18 00:38:32 +01:00
b4ab4703c9
Merge branch 'master' into next
2011-09-17 20:55:13 +01:00
755c618cd4
Bugfix: Don’t warp the pointer if it already is on the target output (Thanks cls, pnutzh4x0r)
...
My testcase was putting a floating window on the left output, but overlapping a
little to the right output. Then switch to a workspace on the right output.
2011-09-17 20:53:24 +01:00
e6a854a742
Remove obsolete code for floating focus
2011-09-17 19:29:06 +01:00
172f3563f7
Implement focus switching (focus left/right) for floating windows
...
Fixes : #475
2011-09-17 19:28:41 +01:00
fe35c80741
Also make compilation possible on systems with libev 3
...
From the source:
We need ev >= 4 for the following code. Since it is not *that* important
(it only makes sure that there are no i3-nagbar instances left behind) we
still support old systems with libev 3.
2011-09-17 17:55:36 +01:00
7a38d8ac56
Merge branch 'master' into next
2011-09-17 14:13:05 +01:00
deab3ac338
Send the correct X11 border_width in faked ConfigureNotifys
2011-09-17 14:11:55 +01:00
f2f636f9e7
Bugfix: Honor the X11 window border in ConfigureRequests
2011-09-17 14:11:01 +01:00
983a679537
Bugfix: Honor the X11 window border when calculating dimensions for floating windows
2011-09-17 14:10:35 +01:00
f6eaa8a580
Bugfix: Don’t use top border height twice when calculating dimensions for floating windows
2011-09-17 14:09:57 +01:00
5a85c9efd2
fix build in 'next' (Thanks thomasba)
2011-09-14 23:16:23 +01:00
ad568aa8c1
Merge branch 'master' into next
2011-09-14 23:00:02 +01:00
b1aa8107b3
Bugfix: Correctly handle ConfigureRequests for floating windows in multi-monitor setups (Thanks thomasba)
...
Fixes #519
2011-09-14 22:59:19 +01:00
6b541d382b
Bugfix: Don’t fix floating coordinates when reassigning (fixes flickering)
...
This fixes flickering when moving floating windows between different monitors.
2011-09-14 22:58:51 +01:00
dc790cfa32
Bugfix: Correctly free old assignments when reloading
...
Fixes #516
2011-09-11 23:41:46 +01:00
f3716e45cf
re-indent load_configuration()
2011-09-11 23:31:06 +01:00
2c7148c46e
Same bugfix as 2a215fd, but for assignments with invalid criteria
2011-09-11 22:54:41 +01:00
717ae819c5
Merge branch 'master' into next
2011-09-11 22:52:44 +01:00
2a215fd7e2
Bugfix: Ignore for_window commands with empty (invalid) criteria (+test) (Thanks aksr)
2011-09-11 22:52:33 +01:00
a41bfba47a
finally remove the deprecated 'screen' keyword from cfgparse.l
2011-09-11 22:27:31 +01:00
d82698efa7
make the old assign syntax trigger an i3-nagbar warning (it’s deprecated), adjust test
2011-09-11 22:01:36 +01:00
e47e100819
Introduce a new syntax for the 'assign' command:
...
Instead of using a quoted string to specify the class / title, the assign
command now uses criteria, just like the for_window command or the command
scopes.
An example comes here:
# Assign all Chromium windows (including popups) to workspace 1: www
assign [class="^Chromium$"] → 1: www
# Make the main browser window borderless
for_window [class="^Chromium$" title=" - Chromium$"] border none
This gives you more control over the matching process due to various reasons:
1) Criteria work case-sensitive by default. Use the (?i) option if you want a
case-insensitive match, like this:
assign [class="(?i)^ChroMIUM$"] → 1
2) class and instance of WM_CLASS can now be matched separately. For example,
when starting urxvt -name irssi, xprop will report this:
WM_CLASS(STRING) = "irssi", "URxvt"
The first part of this is the instance ("irssi"), the second part is the
class ("URxvt").
An appropriate assignment looks like this:
assign [class="^URxvt$" instance="irssi"] → 2
3) You can now freely use a forward slash (/) in all strings since that is no
longer used to separate class from title (in-band signaling is bad, mhkay?).
2011-09-11 21:54:13 +01:00
d03dffe012
Kill left-over i3-nagbar processes on 'exit'
2011-09-11 21:49:35 +01:00
b3e1fb1f3b
Make the old 'assign' case-insensitive again (+test) (Thanks aksr)
2011-09-11 21:16:45 +01:00
c1c1730516
pcre: enable UCP, UTF-8 (if available), extend t/19-match
2011-09-11 11:40:51 +01:00
2fc54aadf1
Implement support for PCRE regular expressions for all criteria (for_window, commands, assignments)
2011-09-10 23:53:11 +01:00
77ae771476
Restrict 'resize' command to left/right for horizontal cons, up/down for vertical cons
...
This makes the interface much clearer and avoids confusion about which key to
press in which situation.
2011-09-05 22:36:04 +02:00
8928b5f55d
Bugfix: Correctly handle workspace names which do not start with a zero
2011-09-05 22:21:10 +02:00
b4809e9ba7
Merge branch 'master' into next
2011-08-31 14:45:14 +02:00
e1631d6320
properly free memory/close fd upon errors (Thanks xeen)
...
Found with the static analyzer cppcheck
2011-08-31 14:44:48 +02:00
dfda878272
Bugfix: Correctly assign a number to workspaces starting with '0: ' (Thanks SardemFF7)
2011-08-28 18:17:02 +02:00
57e7266da4
Merge branch 'master' into next
2011-08-28 17:41:23 +02:00
6e59d693d2
Use name_json if available, rather than non-descriptive name.
2011-08-28 17:36:16 +02:00
16188af8bf
Merge branch 'master' into next
2011-08-28 15:47:35 +02:00
5618875df8
Bugfix: Make 'floating enable' check for dock windows (Thanks edelkind)
...
Fixes #501
2011-08-28 15:46:50 +02:00
8114ecda47
Merge branch 'master' into next
2011-08-27 13:47:57 +02:00
e97a7e34f7
Bugfix: Re-implement reconfiguring height of dock windows (+test) (Thanks thomasba)
2011-08-27 13:47:10 +02:00
6c42a179ec
Merge branch 'master' into next
2011-08-27 13:03:20 +02:00
4c01dbd726
Bugfix: Don’t always focus floating windows (fixes focus stealing with assignments) (+test) (Thanks aksr)
2011-08-27 13:02:44 +02:00
8e8b9b93f4
ipc.c: Fix warning
2011-08-26 23:33:11 +02:00
7d2978ead4
Merge branch 'master' into next
2011-08-26 19:18:16 +02:00
f53f954a33
Bugfix: Re-enable X11 Eventmask *after* pushing all the X11 changes
...
This should fix focus problems where EnterNotify events were generated while
moving windows. Hopefully it does not trigger any regressions :).
Fixes #500
2011-08-26 19:17:52 +02:00
afff328c59
Merge branch 'master' into next
2011-08-26 12:37:04 +02:00
12e15609ef
Bugfix: Correctly recognize duplicate workspace assignments (Thanks Moredread)
...
Example of a faulty config:
workspace 5 VGA1
workspace 5 LVDS1
Fixes #498 , #499
2011-08-26 12:35:42 +02:00
53a9ace3a6
Merge branch 'master' into next
2011-08-26 03:24:14 +02:00
7bf465af9f
Fix prototype of con_inside_focused
2011-08-26 03:23:57 +02:00
a57a2b9ccb
Merge branch 'master' into next
2011-08-26 03:18:16 +02:00
7fca7f029f
Correctly render containers when a split container is focused
2011-08-26 03:17:41 +02:00
6d91a6248e
Merge branch 'master' into next
2011-08-26 02:02:50 +02:00
7741608a9d
Bugfix: Only consider tiling windows when attaching tiling windows to workspaces (Thanks Tucos)
...
Fixes #436
2011-08-26 02:01:06 +02:00
4984b81282
Merge branch 'master' into next
2011-08-25 21:59:19 +02:00
f06059ec94
Bugfix: Accept '\t' in the 'set' command, don’t die but ELOG in case of errors (Thanks atsutane)
2011-08-25 21:58:03 +02:00
4fcca74e2b
Merge branch 'master' into next
2011-08-25 00:24:12 +02:00
4f22e12c5c
Bugfix: Correctly render non-leaf containers (Thanks eeemsi, mseed)
...
Fixes #465
2011-08-25 00:23:33 +02:00
2acbf4d4a4
Compilation fix: Add dont_warp=false
2011-08-24 23:06:49 +02:00
75c11cb894
Merge branch 'master' into next
2011-08-24 23:00:12 +02:00
698d97cd02
Bugfix: Correctly warp floating windows when using the 'move' command
2011-08-24 22:59:46 +02:00
cd2d7ef484
Bugfix: Correctly keep focus when moving non-leaf windows
2011-08-24 22:55:56 +02:00
1d9a2abc05
Bugfix: Fix coordinates when moving a floating window to a different output
2011-08-24 22:54:10 +02:00
37a40671c9
Merge branch 'master' into next
2011-08-24 22:43:31 +02:00
62e9eab4e5
Merge branch 'master' into next
...
Conflicts:
src/floating.c
2011-08-24 22:43:15 +02:00
7558c1ddbd
Bugfix: Correctly handle current_output == NULL
...
Fixes t/66-assign.t
2011-08-24 22:41:17 +02:00
a33bfa81d2
Move centering code to before sanity check
2011-08-24 22:27:15 +02:00
c527497a4b
Merge branch 'master' into next
2011-08-24 16:58:47 +02:00
247e115835
Bugfix: Correctly place floating windows on their appropriate output (Thanks kraM)
...
Fixes #452
This might also fix problems with Firefox where Firefox only displays a white
window (my guess is that it mapped a floating window outside of the actually
visible area for some reason).
2011-08-24 16:57:35 +02:00
ff85023b08
Merge branch 'master' into next
2011-08-24 15:14:53 +02:00
0d35feb71b
Bugfix: Make the 'resize' command work inside tabbed/stacked cons (+test) (Thanks sbedivere)
...
Fixes #461
2011-08-24 15:14:04 +02:00
642a745004
Merge branch 'master' into next
2011-08-24 00:57:36 +02:00
0848844f2d
Bugfix: Fix 'focus mode_toggle' on an empty workspace (Thanks BeF)
...
Fixes #487
2011-08-24 00:55:11 +02:00
2cd8231fce
Merge branch 'master' into next
2011-08-20 17:48:49 +02:00
f15559eb1f
Don’t die, but ELOG and fallback when the pointer cannot be queried (Thanks Niklas)
2011-08-20 17:48:07 +02:00
22e30061f3
Merge branch 'master' into next
2011-08-17 16:37:09 +02:00
f172359ba5
Bugfix: Don’t change focus when assigned windows start on invisible workspaces (+test) (Thanks ioflag)
...
Fixes #468
2011-08-17 16:36:19 +02:00
ec317e78c1
use 'break' instead of 'return', the generated code will end up in a switch statement
2011-08-17 16:12:48 +02:00
7ddba4995f
BUG-396: Implement move output <RANDR-OUTPUT> command
...
Also add support for move output <up|down|left|right> and update
userguide about the new command.
2011-08-17 16:10:11 +02:00
4cf2cab626
Merge branch 'master' into next
2011-08-17 13:37:33 +02:00
09ad9808f6
Bugfix: Set focus to where the mouse pointer is when starting (Thanks nutron)
...
Fixes #477
2011-08-17 13:37:08 +02:00
2eab8d7f20
Merge branch 'master' into next
2011-08-17 12:29:15 +02:00
7c6f693c8a
Bugfix: Don’t consider the workspace next/prev command when looking for named workspaces
...
Fixes #469
2011-08-17 12:28:45 +02:00
7eacf8dd04
Merge branch 'master' into next
2011-08-17 12:17:29 +02:00
22882f4e89
Bugfix: Initialize verbose to 'false' (Thanks tilman)
...
Verbosity was set to 'true' when we started the tree branch.
We forgot to set it back to 'false' :-).
2011-08-17 12:16:32 +02:00
7a22bd1cf3
Merge branch 'master' into next
2011-08-17 12:14:17 +02:00
36224f86d1
Only warp pointer once during x_push_changes()
...
- Introduce warp_to static variable in x.c that stores the coordinates
to warp to as a Rect.
- Add x_set_warp_to function to set this variable. Use in _tree_next,
workspace_show, and con_move_to_workspace.
- In x_push_chanages, if warp_to is set, then call xcb_warp_pointer_rect
and then reset it to NULL.
This fixes all know bugs for pointer warping for me.
2011-08-17 12:12:40 +02:00
2abe23d6ff
Merge branch 'master' into next
2011-08-17 01:52:45 +02:00
7951445849
xcb: use predefined XCB_ATOM_ atoms, don’t request them
2011-08-17 01:41:19 +02:00
d3efa73dd7
Merge branch 'master' into next
2011-08-11 22:22:44 +02:00
bf0c67b2af
Warp cursor when changing workspace.
2011-08-11 22:13:50 +02:00
3af7692a92
Merge branch 'tests-optimize' into next
2011-08-10 15:57:28 +02:00
10f871b57b
implement "socket activation": passing IPC sockets to i3
2011-08-10 15:55:27 +02:00
016ecb65fb
Merge branch 'master' into next
2011-08-09 10:02:55 +02:00
d8cf36ce83
Fix two focus issues when switching/moving workspaces
...
1. Fix focus when moving to same workspace.
If we have a single window on a workspace and we switch to the same
worksapce, focus_next will be the workspace container, rather than the
current window, so simply call con_descend_focused to ensure we set the
focus to a window.
2. Fix focus when moving a container to a visible workspace.
Call workspace_show before we attaching to new visible workspace, so we
don't get in the weird situation where target workspace has focused
window, but it isn't considered focused.
2011-08-09 10:01:08 +02:00
42db9de7ec
Add new_float config option.
...
This option sets the default border style for containers automatically put into floating mode.
Fixes #264
2011-08-09 09:29:53 +02:00
cd5ebc2dca
src/manage.c: properly set automatic flag when calling floating_enable()
2011-08-09 09:29:47 +02:00
eb0a56fad1
Merge branch 'get-marks' into next
2011-08-09 09:28:06 +02:00
4253aa4ba2
Merge branch 'master' into next
2011-08-09 09:27:55 +02:00
cd1add1f3c
Bugfix: don’t free the old json_output, the caller does that
2011-08-09 09:27:28 +02:00
95416175cd
Bugfix: use FREE to correctly handle NULL replies
2011-08-09 09:27:24 +02:00
5e06b1b21d
Fix some potential memory leaks
2011-08-09 09:27:15 +02:00
3cc22dcbe4
Preserve marks between restarts.
2011-08-09 08:19:31 +02:00
35d7ef0ddd
Feature: implement GET_MARKS
2011-08-09 08:04:33 +02:00
e304902874
Merge branch 'master' into next
2011-08-07 20:45:20 +02:00
6fb5d6e313
initialize most to NULL, fixes warning
2011-08-07 20:45:06 +02:00
9260cd7e12
Merge branch 'master' into next
2011-08-07 17:56:37 +02:00
d39261a1f0
rewrite con_descend_orientation
...
It now uses the container orientation (if it is appropriate, the last focused
one otherwise) to recurse. This works better if the target workspace is in
vertical orientation when you use right/left or if it is in horizontal
orientation but you use up/down.
2011-08-07 15:57:36 +02:00
99ba193ce7
Bugfix: the up/down directions were swapped
...
Also compare 'output' and 'current' in the same order in both parts of the
condition to make the comparison more clear.
2011-08-07 15:46:24 +02:00
692d65b0fd
little style fixes
2011-08-07 15:24:51 +02:00
a547365a88
Implement switching focus across screens.
...
Modify _tree_next() so that when we reach the workspace container:
1. Find the next corresponding output (screen) using the added
get_output_next().
2. If there is another output, find the visible workspace.
3. Call workspace_show on found workspace.
4. Find the appropriate window to focus (leftmost/rightmost, etc.) using
con_descend_direction, and then focus it.
I've only tested on horizontal monitors (left/right).
2011-08-07 14:33:07 +02:00
94ba655794
Merge branch 'master' into next
2011-08-06 18:54:50 +02:00
cd5e74bd8e
Bugfix: Call tree_render() before starting the dragging when dragging a floating window (Thanks eeemsi)
...
Fixes #462
2011-08-06 18:53:39 +02:00
2631ad4c07
Merge branch 'master' into next
2011-08-05 01:04:28 +02:00
ec0d67410a
Fix border rendering (Thanks Paride Legovini)
2011-08-05 01:03:56 +02:00
6e95004d6c
Merge branch 'master' into next
2011-08-04 23:37:40 +02:00
f2e1e220a4
Bugfix: Use the right format string (Thanks pnutzh4x0r)
2011-08-04 23:34:23 +02:00
7e0cbf18f9
Bugfix: Correctly parse the 'focused' (it’s a bool, no longer int) when restoring layout (Thanks andi)
2011-08-04 22:58:19 +02:00
93c3596619
Merge branch 'master' into next
2011-08-04 22:21:42 +02:00
1d50cff7ca
Bugfix: Fix stacking order
...
The commit 192dbdabd6
2011-08-04 22:19:30 +02:00
ecc2cae3f7
Bugfix: use ELOG to actually get the error message into the logfile shown by i3-nagbar
2011-08-04 21:43:55 +02:00
4e350664ae
Bugfix: Check that ->symbol != NULL before using strcasecmp()
2011-08-04 21:38:13 +02:00
787dd4059f
little style fixes for the previous patch
2011-08-04 21:25:47 +02:00
9d101d8473
check_for_duplicate_bindings
2011-08-04 20:37:01 +02:00
e9395149b9
Merge branch 'master' into next
2011-08-04 20:11:44 +02:00
1913bf0e5c
Add "instance" to matching criteria
2011-08-04 20:10:31 +02:00
837bb50826
Parsing workspace name so if the first part is a number, the workspace will get this number. If no number is found it will default to -1.
2011-08-04 00:30:07 +02:00
1750192f63
Modify workspace next/prev to account for workspaces on all outputs.
...
Generally, the traversal goes: numbered workspaces in order, and then
named workspaces in the order in which they appear in the tree.
Example:
Output 1: Output 2:
1 3 D C 2 4 B A
Traversal: 1, 2, 3, 4, D, C, B, A, 1, ...
Note, after the numbered workspaces, we traverse the named workspaces
from output 1, and then output 2, etc.
2011-08-04 00:12:09 +02:00
d0741975f1
Bugfix: Use the appropriate number when assigning numbered workspaces in randr.c
2011-08-04 00:10:23 +02:00
c883e7050a
Include <limits.h> in all.h
2011-08-04 00:10:04 +02:00
92481b133c
docs/userguide: the correct command is 'floating enable', not 'mode floating' (Thanks Sander)
...
Fixes : #453
2011-08-03 20:48:28 +02:00
e616b45c83
Bugfix: realloc() with size == 0 works like free() and returns NULL, so don’t die()
2011-08-03 20:43:08 +02:00
192dbdabd6
Bugfix: Correctly set the _NET_CLIENT_LIST_STACKING hint (fixes chromium tabbar)
...
Fixes #287
2011-08-03 20:07:03 +02:00
cc5f3ce95a
Bugfix: Fix 'resize' with direction != 'up' for floating windows
...
Fixes #447
2011-08-03 14:48:52 +02:00
9800d5286f
Bugfix: Correctly check if the workspace already exists
2011-08-03 12:18:30 +02:00
dcba8024de
also handle quoted workspace names, extend t/72 for that
2011-08-03 03:33:12 +02:00
0092b245a1
Bugfix: When looking for an unused workspace, try the named workspaces first
...
Fixes : #449
2011-08-03 03:08:59 +02:00
719022d80a
Bugfix: Ensure that the percentage is > 0.05 when using the 'resize' cmd (Thanks rogutes)
...
Fixes #437
2011-08-02 22:31:45 +02:00
554a43ca4a
Bugfix: Make the criteria rules recursive in src/cfgparse.y, too (Thanks f8l)
2011-08-02 19:46:14 +02:00
c9194b4297
Bugfix: Correctly bind on multiple keycodes if a symbol has more than one (Thanks ubitux)
2011-08-02 10:47:03 +02:00
3204caa98d
i3-migrate-config-to-v4: drop the .pl suffix
...
As lintian (a Debian package checker) mentions, it is more clever to install it
without the extension, since the implementation language might change.
2011-07-31 23:11:05 +02:00
bc98185f85
Bugfix: Handle (and free) the last_motion_notify
2011-07-31 21:21:45 +02:00
7180dca3b2
Bugfix: Correctly free the xcb_get_geometry reply when not managing a window
2011-07-31 20:39:33 +02:00
22de7593c5
Bugfix: free() the grab_pointer reply
2011-07-31 19:52:58 +02:00
6c35a0b93b
handle the xcb_grab_pointer reply
2011-07-31 19:48:39 +02:00
ffbcfa2c97
Bugfix: also free() X11 errors in the main loop
2011-07-31 19:41:57 +02:00
fdfa88586d
Forgot free(event)
2011-07-31 19:34:55 +02:00
fa1fe3cfed
Bugfix: Same xcb_send_event fix as 1e0033bce4
2011-07-31 19:33:56 +02:00
5bfc89f733
Bugfix: Correctly pass the pointer to xcb_send_event
2011-07-31 19:26:38 +02:00
52b3646ecc
xcb: don’t use the _unchecked variant for requests which have a reply
2011-07-31 18:19:41 +02:00
7f3f7c26b6
Bugfix: free replies after using them
2011-07-31 18:17:56 +02:00
d9ff172d36
Bugfix: load_font: free reply after using it
2011-07-31 17:57:11 +02:00
cbfcf5bd8b
Bugfix: free font string after using it
2011-07-31 17:54:53 +02:00
ee83df9684
Bugfix: cfgparse: correctly free parser/lexer
2011-07-31 17:50:54 +02:00
088681c781
Bugfix: property handlers: correctly free replies in all cases
2011-07-31 17:46:41 +02:00
1e0033bce4
Bugfix: Allocate 32 bytes for xcb_send_event, it always copies 32 bytes
...
Fixes an 'uninitialized memory' error in valgrind
2011-07-31 17:46:01 +02:00
4875868689
Bugfix: Free property replies in their handlers
2011-07-31 17:12:37 +02:00
d3e3339a05
Bugfix: Fix small memory leak when initializing output Cons
2011-07-31 17:11:51 +02:00
f2fc523de7
Bugfix: fix memory leak in src/cmdparse.y
2011-07-31 17:11:28 +02:00
3721c598bd
Bugfix: Set the cursor via the Xlib connection if XCursor is supported
...
This fixes a race where we created cursors on the Xlib connection, flushed,
then used the cursor on the XCB connection. Even though we flushed, the X
server did not process the requests yet and therefore returned a BadCursor
error.
This bugfix uses the Xlib connection for setting the root window cursor which
will ensure that the requests are properly serialized.
An easy test for this (on my machine) is the following ~/.xsession:
xsetroot -cursor_name cross
exec i3
If you see a cross cursor instead of the pointer, the race happens. You’ll see
a error_code=6 error in your ~/.xsession-errors.
2011-07-29 13:13:51 +02:00
bc7dec6a4c
X11 errors: also log the error_code (see X Protocol, Appendix B, Errors)
2011-07-29 13:11:02 +02:00
ae9c90ba19
Don't leak the cursor_id.
...
Fixes a server-side leak. The cursor_id is not needed when we're
using themed cursors (we never freed it either).
2011-07-29 12:38:44 +02:00
7a18dcc89e
Set the root window cursor. Fixes #442 .
2011-07-29 12:38:24 +02:00
ed30043950
Bugfix: Also abort drag_pointer after XCB_KEY_PRESS / XCB_KEY_RELEASE (Thanks eeemsi)
2011-07-28 21:01:34 +02:00
f84264ae41
remove _NET_WM_WORKAREA from _NET_SUPPORTED for now
...
See ticket #301 , this is a problem with Qt apps on your second monitor.
We should implement better EWMH support, but not before the release :).
2011-07-27 12:51:38 +02:00
18513e1638
x.c: fix warning by removing unused variable
2011-07-25 00:32:14 +02:00
7a7764a0d9
handlers.c: fix warnings
2011-07-25 00:32:03 +02:00
797ba5f7c8
remove unnecessary close, because fclose already closes the file descriptor
2011-07-24 18:42:46 +02:00
34eb9b2664
ipc: make 'focused' a bool
2011-07-24 15:00:09 +02:00
b09bb0fc2a
ipc: make 'urgent' a bool
2011-07-24 14:54:30 +02:00
36fde6dbe1
ipc: send 'percent': null when percent is not relevant for the container
2011-07-24 14:47:28 +02:00
a05a9f8dae
Set some more atoms for _NET_SUPPORTED (Thanks lexszero)
2011-07-23 22:40:47 +02:00
3f7c7c2e38
remove left-over wordexp.h include
2011-07-23 22:37:41 +02:00
ffe297f5e5
Bugfix: use the global root variable, don’t get the first one (Thanks quaec)
2011-07-23 22:29:01 +02:00
fdd098b010
secure strscpy by replacing with strncpy
2011-07-23 22:22:36 +02:00
370715d1a8
Bugfix: Don’t leak file descriptor
2011-07-23 22:11:01 +02:00
062ce3ef03
Bugfix: Correctly resize when clicking on the border of a stacked con
...
Runs the same code as for non-stacked / non-tabbed containers, but on the
parent of the container (which is the stacked / tabbed con, since route_click
gets called with the child).
2011-07-23 21:48:14 +02:00
02dfb8e891
use memmem and strndup from FreeBSD on Darwin (Thanks Marcus)
2011-07-17 15:18:45 +02:00
2d71102796
Bugfix: Switch to appropriate workspace when using 'focus' (+test) (Thanks rogutes)
...
Fixes #432
2011-07-14 23:45:36 +02:00
8c1a242f5f
reload the config after editing it through i3-nagbar
2011-07-13 18:47:08 +02:00
cc24a96e96
patch to allow exec_always in configure file
...
fixed indentation, updated docs
2011-07-12 18:23:14 +02:00
5555c0fd3b
Bugfix: Don’t raise the stacked/tabbed decoration when border != BS_NONE and children == 1 (Thanks smartass)
...
Otherwise a black area would cover the top of the child window.
2011-07-11 23:17:56 +02:00
06054642fe
debug.c: remove handle_event
2011-07-11 18:21:25 +02:00
897b53f1c2
Bugfix: run nagbar commands through sh(1) (Thanks Tucos)
2011-07-11 16:51:57 +02:00
429d310011
nagbar: use less / vi as fallbacks for PAGER / EDITOR
2011-07-11 16:40:10 +02:00
05e39c1c48
Ignore X11 errors caused by ReparentWindow / ChangeProperty on already destroyed windows
...
These errors can happen because a DestroyWindow request by a client will
trigger an UnmapNotify, then a DestroyNotify. We cannot distinguish this
UnmapNotify from an UnmapNotify not followed by a DestroyNotify, so we just try
to send the ReparentWindow / ChangeProperty and ignore the errors, if any.
2011-07-10 23:44:13 +02:00
48f5166daf
log: display time in microseconds when DEBUG_TIMING is set
2011-07-10 23:11:21 +02:00
937a80511a
x: only configure window coordinates when height > 0
...
Fixes some X11 errors
2011-07-10 22:59:04 +02:00
d9038cdb80
x: Only render / copy pixmap when the pixmap was actually created
...
Fixes some X11 errors
2011-07-10 22:58:49 +02:00
85d851de5f
x: disable GraphicsExposure events on our pixmap graphics contexts
...
Gets rid of GraphicsExposure and NoExpose events, which we don’t use anyways.
2011-07-10 22:27:51 +02:00
78d25c4cd9
expose event handler: use x_deco_recurse
2011-07-10 22:06:16 +02:00
7d9ba707b3
x: Don’t pre-render the decoration for windows inside a stack which are not visible
...
Saves n-1 decoration renderings for n windows in a stack whenever a new window
gets added or removed.
2011-07-10 21:55:29 +02:00
d7f9700ba4
x: use PolySegment instead of two PolyLine requests
2011-07-10 21:19:31 +02:00
8f4b95dccd
x: change EnterNotify event mask only for mapped windows
...
Saves a few ChangeWindowAttributes requests.
2011-07-10 20:18:06 +02:00
37e0cf8346
x: copy the pre-rendered pixmap contents to a decoration window immediately after mapping
...
Reduces flickering.
2011-07-10 20:15:22 +02:00
afef42a4ac
x: set the contents of a decoration window immediately after changing its size
...
Reduces flickering. A window loses its contents when being resized, so we have
to restore them as fast as possible.
2011-07-10 20:08:40 +02:00
517833569d
x: raise the stack decoration above the stack windows (reduces flickering)
...
This reduces flickering when opening new windows in a stack, see the comment.
2011-07-10 20:05:49 +02:00
0d8dd571f8
x: when rendering stacked/tabbed cons, only update decoration once, saves some CopyAreas
2011-07-10 20:01:29 +02:00
8be26c9a22
x: Don’t set background color on frame windows, reduces flickering
2011-07-10 19:58:46 +02:00
64cfb2dbb1
Revert "x: Set pixmap as background window, saves a lot of CopyAreas"
...
This reverts commit 84b804cda6
2011-07-10 16:22:09 +02:00
c55abca115
add i3-nagbar. tells you about config file errors (for example)
2011-07-10 14:33:19 +02:00
0add563448
Bugfix: multiple criteria should use a logical AND (+test) (Thanks f8l)
2011-07-08 00:21:29 +02:00
0ca229ceb3
migrate-config: also make force_focus_wrapping a v4-only statement
2011-07-08 00:17:48 +02:00
ac335fcffa
Automatically call the migration script when the config does not look like v4
2011-07-06 20:43:00 +02:00
c408fef021
Implement 'focus floating', 'focus tiling' and 'focus mode_toggle' (+test +docs)
2011-07-04 17:09:52 +02:00
71741d7620
Bugfix: Only set ENTER_WINDOW event mask for mapped windows (fixes focus problems)
...
Fixes focus problems when switching to empty workspaces or when going in/out of
fullscreen.
2011-07-04 13:41:02 +02:00
23d4917e43
Bugfix: Correctly revert floating focus when killing the last floating window (+test)
2011-07-01 01:10:43 +02:00
e5c811248f
Bugfix: Fix floating assignments, extend test for the assign command (Thanks Tucos)
2011-06-13 17:42:59 +02:00
d641e1da3b
Don’t force wrapping when focusing in a direction would work (+test)
...
Think of the following layout:
-------------
| tab | |
| con | win |
| | |
-------------
The tabbed container on the left has two children. Assume you have focused the
second/right child in the tabbed container. i3 used to focus the first/left
container of the tabbed container when using 'focus right' (it wrapped focus).
With this commit, the default behaviour is to instead focus the window on the
right of the screen.
The intention is to make focus switching more intuitive, especially with tabbed
containers supporting 'focus left'/'focus right' in tree. You should end up
using less 'focus parent' :).
You can force the old behaviour with 'force_focus_wrapping true' in your
config.
Code coverage is 62.5% with this commit.
2011-06-12 12:56:50 +02:00
b35ff6a7c9
Bugfix: Correctly attach new output cons to the root con (Thanks mseed)
2011-06-11 14:36:09 +02:00
fb9d77305e
Implement 'fullscreen global'
2011-06-10 18:27:20 +02:00
bef25d72aa
Implement 'border toggle' (+test)
2011-06-10 16:15:52 +02:00
60ae26c19d
Implement 'workspace next/prev' (+test)
2011-06-10 16:03:59 +02:00
39b1c1bf75
Re-implement the 'mode' command
2011-06-10 02:38:07 +02:00
df0b7bed48
cmdparse: s/direction/split_direction to be more clear
2011-06-10 02:25:14 +02:00
f1385ba3d5
CONFIG BREAK: Rename 'restore' to 'append_layout'
2011-06-10 02:15:31 +02:00
bd49c80d5f
CONFIG BREAK: rename 'mode floating/tiling' to 'floating enable/disable'
...
The three different variants now:
floating enable
floating disable
floating toggle
2011-06-10 02:06:47 +02:00
9bbb37bb55
BREAKS CONFIG: rename 'level up' to 'focus parent'
...
…and 'level down' to 'focus child'. More intuitive than the old command names.
2011-06-10 01:36:33 +02:00
9aa7e5fbd6
Parse multiple criteria in commands (+test), better error message for 'focus'
2011-06-08 23:34:08 +02:00
d68e4710fe
CONFIG BREAK: kick the 'next'/'prev' commands, introduce 'focus left' etc.
...
Instead of the cryptic next/prev commands, we now provide an argument to the
focus command. Userguide and default config is updated.
2011-06-08 20:49:49 +02:00
58e02e84e2
Bugfix: Don’t break focus stack when inplace restarting with fullscreen windows (Thanks mike)
2011-06-03 01:48:55 +02:00
1585d942ea
Make workspace_layout handle all cons at workspace level, not only the first one (+test)
...
This makes opening new windows on workspace level and moving windows to the
right/left more like in the old i3.
2011-06-02 17:21:38 +02:00
51bfdbf0a8
ipc: make 'layout' a string
2011-06-02 17:12:18 +02:00
97e45b9cfc
Bugfix: RandR: Correctly assign focused workspaces to outputs
...
Fixes : #399
2011-05-29 14:39:41 +02:00
1fc15d270e
Bugfix: rendering cache also needs to consider con->pixmap_recreated for borders
2011-05-29 13:20:41 +02:00
18ec15b0f9
x: fix race condition where the new event mask was not set directly after reparenting
2011-05-29 13:20:41 +02:00
8acea3d34c
call tree_render() only after commands which require it
...
Saves one call of tree_render for exec, for example
2011-05-29 13:20:34 +02:00
446c9b7313
Bugfix: Set pixmap_recreated before rendering the decoration
2011-05-29 12:20:09 +02:00
f680c8841f
x: only re-render the tree in handle_normal_hints when they actually changed
2011-05-29 11:46:01 +02:00
b49874dcb8
x: first create/render pixmap, then change window sizes (reduces flickering for new windows)
...
Especially in stacked cons.
2011-05-29 11:31:22 +02:00
7ae0c9c973
Bugfix: Check swallows before assignments when managing windows (Thanks julien)
...
Fixes #395 (empty containers on restart when assigned windows are visible)
2011-05-25 21:00:53 +02:00
7208d01048
remove unused code from manage.c
2011-05-25 20:47:47 +02:00
2c68c234ea
Implement assignments for (named) workspaces, with '~' compatibility (floating)
2011-05-23 18:41:17 +02:00
272a86745e
Bugfix: Free pixmaps when killing windows (Thanks Mike)
2011-05-22 23:32:59 +02:00
4c1392d8ab
retab! cfgparse.l
2011-05-22 22:15:43 +02:00
c23f3b45fc
cfgparse.l: kill a few states by using the stack
2011-05-22 22:08:40 +02:00
1d6447187c
cleanup cfgparse lexer/parser (ignore whitespace, solves conflicts)
2011-05-22 21:48:25 +02:00
e27a8597d8
forgot to remove unused TOK_ATTACH token from lexer
2011-05-22 21:42:34 +02:00
08f64f011d
cleanup cmdparse lexer/parser (ignore whitespace, solves conflicts)
2011-05-22 21:26:50 +02:00
03cc490f0e
Bugfix: fix crash when disabling floating mode
2011-05-16 20:51:29 +02:00
5ae4620a24
Time Lord technology: for_window config directive to run arbitrary cmds
...
An example to set all XTerms floating:
for_window [class="XTerm"] mode floating
To make all urxvts use a 1-pixel border:
for_window [class="urxvt"] border 1pixel
A less useful, but rather funny example:
for_window [title="x200: ~/work"] mode floating
The commands are not completely arbitrary. The commands above were tested,
others may need some fixing. Internally, windows are compared against your
criteria (class, title, …) when they are initially managed and whenever one of
the relevant values change. Then, the specified command is run *once* (per
window). It gets prefixed with a criteria to make it match only the specific
window that triggered it. So, if you configure "mode floating", i3 runs
something like '[id="8393923"] mode floating'.
2011-05-15 20:10:25 +02:00
ca2e4199b5
Introduce HANDLE_EMPTY_MATCH macro to simplify command handlers in cmdparse.y
2011-05-15 19:43:35 +02:00
d3e458bc78
Remove old code from randr.c and workspace.c
2011-05-14 22:38:19 +02:00
5db97dc473
Bugfix: Fix initialization / assignments when RandR is missing
2011-05-14 22:34:34 +02:00
3f45d3c447
re-implement assignments of workspace to specific outputs
2011-05-14 22:19:58 +02:00
443753bea6
x.c: disable some of the debug output
2011-05-14 20:04:34 +02:00
0bfab98a7f
Correctly re-implement scrolling on window decorations
...
Got lost when refactoring the click handling in 24463718ccFixes : #390
2011-05-13 21:58:17 +02:00
aea445b690
Bugfix: Attach new cons at the correct place when a floating con is focused (+test) (Thanks fernandotcl)
...
New containers were previously attached directly to the workspace instead of to
the previously focused place in the workspace (for example a stacked con).
Fixes : #376
2011-05-13 21:30:37 +02:00
3d2cd6abaa
Fix kill command with trailing whitespace
2011-05-13 21:18:20 +02:00
167bdd26b7
Argument for 'kill' for killing a specific window (now default) or the whole client (+test)
...
Use 'kill window' to kill a specific window (for example only one specific
popup), use 'kill client' to kill the whole application (or X11 connection to
be specific).
2011-05-13 20:41:03 +02:00
44c2555e67
Bugfix: When focusing the next floating window, descend the CT_FLOATING_CON
...
makes t/35-floating-focus.t pass again
2011-05-13 19:53:19 +02:00
836a3ad615
Bugfix: set WM_STATE to WITHDRAWN when an app unmaps their window(s) (+test)
...
Fixes : #362
2011-05-13 17:04:55 +02:00
62e977102b
Bugfix: Fix the WANT_QSTRING state
2011-05-13 17:03:15 +02:00
b0e871e0cf
Bugfix: Fix focus follows mouse for non-default layout cons (Thanks phnom)
...
Fixes : #361
2011-05-12 22:24:52 +02:00
6e32e6123d
Bugfix: Ignore focus when attaching cons while restoring the layout
...
Fixes : #369
2011-05-12 07:22:17 +02:00
94646190aa
Bugfix: Correct string/quoted string parsing for the commands exec, workspace, nop, restore and mark (Thanks SardemFF7)
...
Fixes : #380
2011-05-12 07:09:06 +02:00
2e75d934a4
Bugfix: Don’t append the --restart parameter on each restart (Thanks aniou)
...
Fixes : #384
2011-05-12 06:58:09 +02:00
c62f70856f
Bugfix: Don’t crash when dock clients set the urgency hint (+testcase)
2011-05-11 22:45:20 +02:00
4be3178d4d
Bugfix: Don’t fill split cons etc. with client background color (fixes nested decoration rendering)
...
Fixes : #359
2011-05-11 22:01:09 +02:00
4da6fc7ba3
Bugfix: Restore border_style when restarting inplace (Thanks aniou)
...
Fixes #385 .
2011-05-11 20:45:56 +02:00
9c05c18156
ipc: change border_style to human-readable string instead of enum value
2011-05-11 20:39:18 +02:00
eb8ad348b2
Bugfix: Don’t run into an endless loop when killing con with children (Thanks mseed)
...
When a tabbed container had more than one child and at least the first one
supported WM_DELETE, i3 entered an endless loop when killing that tabbed
container. This was due to tree_close only sending WM_DELETE without actually
removing the child, while the loop in tree_close assumed that with every call
of tree_close one child would be removed.
2011-05-11 20:22:47 +02:00
e73c171e0d
Bugfix: assign BORDER_BOTTOM instead of BORDER_RIGHT (Thanks Jan)
2011-05-06 13:09:50 +02:00
1fe5c58764
cfgparse.y: define types (Thanks Merovius)
2011-05-05 21:58:28 +02:00
bd73275771
re-indent cfgparse.y
2011-05-05 21:19:47 +02:00
a075fd4ee2
cmdparse.y: set type on the tokens/non-terminals (Thanks Merovius)
2011-05-05 20:39:05 +02:00
3d1acd6c2f
re-implement assigning windows to workspaces
2011-05-02 23:29:26 +02:00
7e51f626ef
Bugfix: Before rendering, attach the con to its floating_con
...
Otherwise, the rendering will produce negative coordinates.
2011-05-02 11:06:13 +02:00
b2754fd679
Bugfix: When re-assigning floating windows to a different output, use the last focused workspace, not the first
2011-05-02 11:05:50 +02:00
79323a0be0
Bugfix: Fix the client background rectangle calculation (Thanks Mike)
...
Really fixes #364 .
2011-05-01 22:27:06 +02:00
b401e08a5d
Bugfix: For fullscreen cons, use a deco_height of 0 to correctly render the background color
...
This should fix #364 .
2011-05-01 19:46:41 +02:00
d28008aa63
Bugfix: Correctly render decorations in tabbed containers (don’t overlap)
...
This fixes a regression introduced in b644fb5f26
2011-05-01 18:48:30 +02:00
8b21812bbd
Bugfix: Add missing tree_render() when handling the urgency hint (Thanks mxf)
2011-04-30 00:37:03 +02:00
a149283964
Fix unaligned memory access on sparc (Thanks David Coppa)
2011-04-28 21:44:29 +02:00
2c6508a6a3
remove useless checks, size_t != ssize_t :)
2011-04-28 20:24:16 +02:00
528f486eee
Make code compatible with yajl 2.0 *and* 1.0
2011-04-27 19:52:53 +02:00
28b9ed6eb3
Bugfix: Ensure that all outputs have a ->con before handling disabled outputs (Thanks JimdiGriz)
...
Steps to reproduce:
• xrandr --output VGA1 --auto
• xrandr --output LVDS1 --off
2011-04-27 10:18:46 +02:00
8a40dc0011
Use XDG_RUNTIME_DIR when available
...
XDG_RUNTIME_DIR is the volatile runtime data dir provided by modern
session manager such as systemd
2011-04-26 18:39:11 +02:00
3721bcb868
Bugfix: Ignore EnterNotifies generated by UnmapNotifies
...
Actually, commit 1c5adc6c351c5adc6c35
2011-04-19 21:50:56 +02:00
cd6f93be3f
Rename bind to bindcode
...
Also fallback when using just 'bind' to be backward-compatible
2011-04-18 23:52:45 +02:00
84b804cda6
x: Set pixmap as background window, saves a lot of CopyAreas
2011-04-18 21:10:50 +02:00
3d5af35fa4
Bugfix: Center floating windows with invalid coordinates on current ws
2011-04-18 19:36:10 +02:00
f613df48d2
Bugfix: Check if a floating window’s coordinates are within a different workspace when managing (Thanks Merovius)
...
Fixes : #297
2011-04-18 19:28:03 +02:00
60532a90e7
Bugfix: Assign floating cons to correct workspace when moving between monitors (Thanks dothebart)
...
Fixes : #371
2011-04-18 18:44:39 +02:00
36583ec6ee
Bugfix: When moving floating cons to other workspaces, attach them to the workspace
2011-04-18 18:44:18 +02:00
02acf426d3
Bugfix: Don’t set the layout when it’s default layout anyways
...
Fixes some nasty side-effects
2011-04-02 22:08:38 +02:00
c3b4006f6b
Rename new_container to workspace_layout
2011-04-02 21:49:35 +02:00
650eebc347
Implemented config key 'new_container'
2011-04-02 21:43:49 +02:00
21c7a69812
optimization: when moving floating windows, render/push only the floatingcon
2011-04-01 22:40:12 +02:00
d8bf633e56
Bugfix: Flush the Xlib connection after creating cursors
...
Fixes a race condition where the cursors were created after we were already
using them.
2011-04-01 21:57:08 +02:00
26635a7595
x: skip creating pixmaps when the rect is actually invisible
...
This fixes a few X11 errors.
2011-04-01 21:54:45 +02:00
6419e42f6d
bugfix: fix race condition where window titles were not correctly updated
...
Fixes : #351
2011-04-01 21:39:58 +02:00
57447112ba
x: skip x_draw_decoration when con is not mapped
...
This commit makes workspace switching completely free of cache misses, so
decorations are not re-rendered when switching workspaces.
2011-04-01 20:41:08 +02:00
b644fb5f26
x: recurse x_push_node in focus order. reduces flickering when switching workspaces
2011-04-01 20:40:32 +02:00
20b1fd4293
Skip FocusIn events with mode == NOTIFY_MODE_GRAB or NOTIFY_MODE_UNGRAB
...
According to the Xlib Programming Manual section 10.7.2 [1], these events are
generated when keyboard grabs activate/deactivate, while we are only interested
in focus changes which are done by other programs independend from the
keyboard.
[1] http://tronche.com/gui/x/xlib/events/input-focus/grab.html
2011-03-30 23:00:48 +02:00
4fd4e619ec
little coding style fixes, fix compilation warning
2011-03-21 23:54:13 +01:00
f0f7cb7478
If the socket path isn't specified, write it to /tmp.
2011-03-21 23:49:39 +01:00
39ee97fd82
FREE() already nulls the pointer
2011-03-21 23:49:16 +01:00
6d8784af98
Set the I3_SOCKET_PATH atom to the expanded path.
2011-03-21 23:46:03 +01:00
99ce340fea
Focus cons when moving to a visible workspace on a different output (Thanks mseed)
...
Fixes : #355
2011-03-20 19:32:00 +01:00
67b37551d8
Bugfix: Fix switching workspaces on multi-monitor setups (Thanks mseed)
...
Fixes #356
2011-03-20 18:27:14 +01:00
38173749f8
Bugfix: Also invalidate caches of the following cons in a split con on cache miss (Thanks fernandotcl)
2011-03-20 18:17:18 +01:00
b3ee50b184
Bugfix: Also update pixmaps when the position of the deco_rect has changed (Thanks fernandotcl)
2011-03-20 18:07:07 +01:00
e913e519f2
refactor handlers.{c,h}: declare the handlers static, remove unnecessary parameters
2011-03-20 16:53:12 +01:00
c130cefa93
Handle FocusIn events generated by clients and update decoration accordingly (Thanks mseed)
2011-03-20 16:26:36 +01:00
144deaaaf6
Remove debugging syncs
2011-03-20 14:29:48 +01:00
b25477b15e
Re-implement rendering to pixmaps (double-buffering) and caching decorations
2011-03-20 14:25:09 +01:00
e835888a9e
Bugfix: Actually re-attach dock clients when outputs get disabled (Thanks phnom)
...
Fixes : #348
2011-03-20 01:07:21 +01:00
e9a9a46795
Bugfix: Don’t use the workspace where focus is for deleting workspaces when switching (Thanks mseed)
...
Fixes : #353
2011-03-19 23:19:42 +01:00
03ea7cea28
Bugfix: also invalidate focused_id when the to_focus window is not mapped
...
This fixes a bug where focus might not be set correctly when changing workspaces
2011-03-19 22:54:53 +01:00
b342d387a8
Handle saved_configpath in get_config_path, fix memleak in current_configpath handling, update atoms after reloading (Thanks fernandotcl)
2011-03-19 22:26:15 +01:00
626c65b0d8
Bugfix: correctly store the config path for using it for I3_CONFIG_PATH later
2011-03-19 21:50:13 +01:00
9344b9790c
Bugfix: fix null-pointer dereference when IPC is disabled (Thanks Merovius)
2011-03-19 21:37:27 +01:00
65a3259b3c
Set the I3_SOCKET_PATH and I3_CONFIG_PATH atoms on the X11 root window
2011-03-19 21:20:38 +01:00
8b9aedd2bf
Bugfix: When there’s nothing to focus, focus the root window (Thanks fernandotcl, ThePub)
2011-03-19 20:43:06 +01:00
fd7e4b08f3
rendering: correctly draw background rect (Thanks phnom)
...
Fixes #347
2011-03-18 20:47:59 +01:00
3282bb4069
remove obsolete comment
2011-03-18 17:08:48 +01:00
82e286ed7c
Only send WM_TAKE_FOCUS when the client supports it in the protocols atom
...
Fixes opening xterm, for example
2011-03-18 17:07:56 +01:00
0639a7d95b
Make i3 compatible with the very latest xcb
...
This involves:
• Compiling with xcb-util instead of xcb-{atom,aux} (they merged the libraries)
• Not using xcb-{event,property} anymore (code removed upstream)
• Not using the predefined WINDOW, CARDINEL, … atoms (removed upstream)
• Using the new xcb_icccm_* data types/functions instead of just xcb_*
(for example xcb_icccm_get_wm_hints instead of xcb_get_wm_hints)
Also I refactored the atoms to use x-macros.
2011-03-18 14:39:27 +01:00
36664c6289
Send WM_TAKE_FOCUS to clients when setting focus (fixes java swing problems)
2011-03-17 22:27:59 +01:00
65b05169d3
change the config parser to use default_orientation instead of new_container_orientation
...
It’s a shorter and probably more meaningful description as it is not
immediately clear what a container exactly is when first installing i3.
2011-03-17 17:55:53 +01:00
eeb5bdd66f
cleanup code of workspace rotation on output changes
2011-03-17 17:53:56 +01:00
2f992f5c0e
Added config key for default orientation of containers (new_container_orientation) and added support in randr.c for automatically changing the orientation when user does a xrandr rotate.
2011-03-17 17:43:35 +01:00
b484ed5f9d
When making floating cons tiling, re-insert next to the next focused *tiling* con (Thanks mseed)
...
Fixes : #337 and #350
2011-03-14 23:50:29 +01:00
76e978bfb3
fix small warnings when compiling with DEBUG=0
2011-03-14 23:17:52 +01:00
7100d32971
cmdparse: correctly parse con_id/id (fixes warning)
2011-03-14 23:14:40 +01:00
b21137b2c0
cmdparse: expect 4 shift/reduce conflicts
2011-03-14 23:08:33 +01:00
f900fab453
cmdparse: don’t allow empty operations
2011-03-14 23:03:25 +01:00
627683c053
cmdparse: don’t allow empty commands
2011-03-14 23:03:13 +01:00
8928823e07
remove usless 'operation' token, already handled by 'operation optwhitespace'
2011-03-14 22:29:07 +01:00
18215445f8
remove unused current_bindings (left-over from cfgparse.y)
2011-03-14 22:28:55 +01:00
89ef41dadf
re-implement support for MappingNotifys
2011-03-14 17:20:04 +01:00
01365edb30
ewmh: bump copyright
2011-03-14 17:15:18 +01:00
fb9978b975
ewmh: add comment to describe why we count
2011-03-14 17:15:04 +01:00
c0563af3e2
Bring back some more EWMH support.
2011-03-14 17:11:33 +01:00
b4e3dfd76b
Add the "created" parameter to workspace_get.
...
If created is not NULL, *created is set to whether or not the
workspace has been just created.
2011-03-14 17:07:53 +01:00
b8a716c370
Reload the same config file specified in the command line.
...
Fixes : #346
2011-03-14 16:48:45 +01:00
cdeb49127f
Bugfix: restore focus to the correct window when a non-focused window gets destroyed (+testcase)
2011-03-14 16:34:35 +01:00
f162e7efaa
refactor font caching to just save the ID instead of mainting a cache with pattern→id-mapping
2011-03-10 23:20:17 +01:00
6e4a2b0b96
Fallback fonts for when requesting a erronous font with load_font (e.g. user have specified a font which does not exist in the config file).
2011-03-10 21:46:31 +01:00
86637d2e07
Bugfix: Make level up a noop during fullscreen mode (+testcase) (Thanks dothebart)
...
Fixes #341
2011-03-09 18:37:05 +01:00
74b90cd83f
Bugfix: Send WM_DELETE / kill window the right way (Thanks dothebart)
...
Fixes #336
2011-03-09 18:08:26 +01:00
0a24057241
When leaving fullscreen, set focus to con which was opened during fullscreen (+testcase) (Thanks dothebart)
2011-03-07 00:06:27 +01:00
287d7f9527
Bugfix: Don’t focus new cons when there is a fullscreen con (Thanks dothebart)
...
Also, remove the focus_it parameter from tree_open_con, it makes more sense to
call con_focus outside of the function.
2011-03-06 23:26:02 +01:00
8ce5f2a21b
Bugfix: Fix crash with transient dock clients caused by 7154fecbb
2011-03-06 22:02:02 +01:00
c17b3b7560
remove left-over xcb_aux_sync (debugging code)
2011-03-06 21:56:15 +01:00
b0b195318c
rendering: bugfix: stack child windows of stacked/tabbed cons according to their focus
...
fixes focusing the wrong window after closing a con
2011-03-06 21:49:17 +01:00
4f26316aaa
x: disable all events while re-stacking windows, prevents unwanted EnterNotifys
2011-03-06 21:48:49 +01:00
0689f6d8f1
Bugfix: use tree_render() instead of x_push_changes() to re-render and update the stack
2011-03-06 20:45:03 +01:00
7154fecbbf
Implement the popup_during_fullscreen option, set default to leave_fullscreen
...
Fixes #333
2011-03-06 15:46:06 +01:00
51ff0f80a6
Obey minimum size when resizing floating windows
...
Fixes #285
2011-03-06 14:15:46 +01:00
1891a385ad
Bugfix: also stop searching for resize cons when reaching a floatingcon (Thanks julien)
2011-03-06 13:35:07 +01:00
4514146ed9
Use the combined geometry of children when setting a split container to floating (+testcase) (Thanks mseed)
...
Fixes #332
2011-03-06 02:39:15 +01:00
88ab66e742
Bugfix: don’t focus dock clients with new click handling code (Thanks mseed)
2011-03-06 02:06:05 +01:00
24463718cc
refactor the click handling completely
...
Also re-implements floating modifier on tiling cons.
Fixes : #288 and a lot of headache :)
2011-03-05 20:23:29 +01:00
0a2ee1d2aa
Bugfix: Focus workspace after closing one of multiple dock clients (+testcase) (Thanks mseed)
2011-03-04 15:21:18 +01:00
f6a21994bf
Re-implement focus follows mouse for outputs
...
That is, moving your mouse pointer to a different workspace which does not have
any windows on it yet will correctly update the focus.
2011-03-03 16:36:18 +01:00
caa1ac1a9f
Use the original geometry for floating windows
2011-03-03 16:22:22 +01:00
b484b9ab32
Don’t create floating containers from whole workspaces when they are empty (Thanks mseed)
...
This fixes #327
2011-03-03 14:55:02 +01:00
a038d2674b
Bugfix: 'level up' needs to stop at the workspace con + testcase (Thanks mseed)
2011-03-03 14:30:13 +01:00
62362a464d
fix invalid memory access in xcb_reply_contains_atom (Thanks ys)
2011-03-03 14:14:35 +01:00
77640da9e7
Bugfix: don’t focus the dockarea when closing a dock client
2011-03-03 14:03:06 +01:00
e0647b7fc2
Bugfix: don’t focus dock clients (Thanks mseed, mist)
...
Fixes #321 and #323
2011-03-03 13:59:42 +01:00
33c2b4e582
Bugfix: Correctly fix the percent values for resizing when making a floating con tiling (Thanks mseed) (+testcase)
2011-02-28 23:59:56 +01:00
b595ff05c5
Fix regression: Don’t add floating nodes twice when restoring layout (+testcase)
2011-02-28 20:44:23 +01:00
d80105103c
Bugfix: Re-attach floating cons to the right container (Thanks mseed)
...
This fixes #315 .
2011-02-28 17:23:50 +01:00
beaa85ceb9
Don't leak this descriptor (thanks dothebart).
...
Note that fclose closes the file descriptor frees the stream.
2011-02-28 16:49:10 +01:00
269d360f30
Some assertions to make the static analyzer happy.
...
Assertions give hints to the static analyzer about code paths
where we make assumptions. Used the Clang Static Analyzer.
2011-02-28 16:49:03 +01:00
f4ec0bceff
Very minor issues found with statical analysis.
...
The Clang Static Analyzer uncovered those issues:
- The variable "changed" in handlers.c is written to, but it's
never read since that specific write, so the write is not
necessary.
- In util.c, "tail" may be NULL. In that case, we shouldn't pass
it to strlen because strlen's behavior is not defined when s is
NULL.
- In util.c, "write_index" is incremented twice. It's never used
anymore after being incremented once, so the second increment is
not necessary.
2011-02-28 16:48:22 +01:00
ffc71859a3
Implement support for top/bottom dock clients (according to _NET_WM_STRUT_PARTIAL or requested position)
2011-02-21 14:27:32 +01:00
b6f81fe43c
Bugfix: restore the original width/height with X11 border when restarting (Thanks Merovius)
2011-02-21 03:13:27 +01:00
f34b045619
Fix dock client handling for inplace restarts
2011-02-21 03:01:55 +01:00
3dfe5c8a9a
bugfix: fix clicking on dock clients (Thanks mseed)
2011-02-21 01:58:57 +01:00
9719b21243
refactor some places to use output_get_content()
2011-02-21 01:55:36 +01:00
a92b9dca73
Bugfix: fix disabling RandR outputs
2011-02-21 01:43:39 +01:00
35e79c87c8
Place dock clients on the output corresponding to their geometry request
2011-02-21 01:28:29 +01:00
a33d869885
Bugfix: Correctly open workspaces on additional outputs
2011-02-21 01:12:22 +01:00
6b272fea55
Bugfix: in get_workspaces, only consider the CT_CON, not the CT_DOCKAREAs (Thanks fernandotcl)
2011-02-21 00:54:29 +01:00
272ab840c7
Fix fullscreen mode with dock clients
2011-02-21 00:40:35 +01:00
9a0bc77baf
bugfix: dock clients cannot be floating
2011-02-21 00:23:07 +01:00
7f89c71689
Implement dock mode, update testsuite
...
Currently, dock clients are only possible at the top.
2011-02-20 23:43:03 +01:00
c5ab16c00d
same fix, but for moving (search above the current con when moving is not possible in this direction)
2011-02-19 20:11:47 +01:00
86500c5b88
Skip containers which got only one child when looking for the next/previous one to focus
2011-02-19 19:50:09 +01:00
6a6746b967
revert the replacement of a single h/v-split with its child container
...
Makes more problems than it creates. Will use a different fix suggested by
Merovius.
2011-02-19 18:30:26 +01:00
53d9072ca7
implement TAILQ_SWAP (only for consecutive elements, order relevant) and use it
2011-02-15 02:21:23 +01:00
834f4d7bc2
add missing function documentation
2011-02-14 23:17:30 +01:00
26a416e016
refactor tree_move() into src/move.c, change config (!), change testcase
...
Due to lots of cases which were added and added to tree_move(), the function
was not really easy to understand. For this refactoring, I wrote tree_move()
from scratch, thinking about (hopefully) all cases. The testsuite still passes.
The move command also has different parameters now. Instead of the hard to
understand 'before v' stuff, we use 'move [left|right|up|down]'.
2011-02-14 23:05:20 +01:00
28dd226259
refactor code for removing children from a con
...
Let’s see how this callback stuff will work out. If it doesn’t work out well,
we will remove it.
2011-02-14 18:08:36 +01:00
a5e075c154
Automatically close empty parent cons when making their last child floating (Thanks mseed)
...
This fixes #313
2011-02-14 16:43:41 +01:00
b800555161
Bugfix: check ->layout, not ->type for L_STACKED
2011-02-14 16:35:48 +01:00
305eac0e71
Bugfix: Correctly check asprintf() return value
2011-02-14 16:33:42 +01:00
9cf48f17bb
Fix libxcursor -> xcb cursors fallback.
2011-02-06 17:47:28 +01:00
07381ccb7b
fix a rendering problem for split cons inside tabbed cons (Thanks julien)
...
This fixes #280 .
2011-02-02 17:56:29 +01:00
4d0106b00f
bugfix: don’t crash when moving windows out of a floating con (Thanks mseed)
2011-02-01 17:53:15 +01:00
d855bea215
Bugfix: Correctly focus con when moving to another workspace (Thanks mseed)
...
This fixes #310 .
2011-02-01 17:17:50 +01:00
97ab44b3d8
disable workspace-level move operations (not yet implemented) (Thanks mseed)
2011-02-01 16:59:02 +01:00
9b01b1a7a6
Bugfix: When the container which was just closed is focused, we *do* need to focus another one (Thanks mseed)
2011-02-01 16:42:59 +01:00
dad7c0da00
Don’t create a split container if no other cons are on a workspace (Thanks mseed)
...
This fixes #306 .
2011-02-01 16:08:47 +01:00
0238ce3c73
fix some compiler warnings
2011-02-01 15:43:59 +01:00
8f4b9ddaa4
Fix the choice of the right containers for resizing.
...
Also fixes #311 , which was an assertion failure that uncovered
this problem. Thanks mseed, Merovius.
2011-01-30 18:52:32 +01:00
ac8fb2399d
Don't mess with sizes when moving to other ws.
2011-01-29 15:19:41 +01:00
8be40932f2
Fix assertion when moving out of a floating container.
2011-01-28 01:25:06 +01:00
f465b3c11d
Don't mess with the focus if we're not killing.
...
If we're not killing the mapped window and we're not killing the
parent window either in tree_close, then there's no reason to try
to change the focus. This fixes focus issues when moving a
container around another container (move up, left, bottom, right).
2011-01-28 01:25:03 +01:00
5b6ef3e665
make the sighandler handle SIGABRT
2011-01-28 00:47:49 +01:00
f395c141c8
bugfix: initialize root variable earlier
2011-01-28 00:42:55 +01:00
7b01bc5eb7
Bugfix: use the global root variable, don’t get the first one (Thanks quaec)
...
The case of an X11 server having multiple displays is handled correctly by the
code in src/mainx.c. However, due to some functions not being correctly
refactored and still getting the first screen (and also the first root window)
from the XCB connection, i3 was operating on the wrong root window.
2011-01-28 00:41:53 +01:00
79bbde8766
add a flag to disable the signalhandler
2011-01-28 00:31:26 +01:00
b29af954f6
Don't mess with the percentages in tree_flatten.
2011-01-28 00:12:26 +01:00
5f4123f842
Fix some resizing issues (thanks mseed).
2011-01-27 23:42:37 +01:00
676afce540
bugfix: correctly move cons out of floating cons when the workspace has no other tiling cons (Thanks mseed)
2011-01-27 16:51:41 +01:00
334e41daa4
bugfix: don’t assume a workspace always has tiling cons when focusing (Thanks mseed)
2011-01-27 16:51:16 +01:00
3e08ceaff9
bugfix: resizing problem when resizing vertically on the top border (Thanks julien)
2011-01-27 16:26:19 +01:00
3383437705
refactor some places to use con_descend_focused instead of duplicating code
2011-01-27 16:09:14 +01:00
f462a9a215
re-insert floating cons next to the currently focused con of the appropriate workspace
2011-01-27 16:04:17 +01:00
2f5d111936
when re-inserting a floating con, start with a more fair percent value
2011-01-27 15:53:14 +01:00
fe851b85f0
RandR: respect primary output
2011-01-27 15:40:02 +01:00
432563d6e7
Fix the percentages when moving containers.
2011-01-27 13:00:14 +01:00
07eb20851f
Fix floating mode according to the new requirements.
...
At all times any given non-leaf container should have the sum of
the percentages of its children == 1.0, otherwise we'll crash on
an assertion failure.
2011-01-27 13:00:14 +01:00
568cafd4ec
Fix the resize algorithm I broke earlier.
...
The reason it was broken was that it was ok for the sum of the
percentages to be something other than 1.0. Now this is no longer
the case, the sum of the percentages must always be 1.0 or an
assertion will fail when we render the containers.
2011-01-27 13:00:14 +01:00
bc82fc7e9f
This parameter is no longer needed.
...
The algorithm is now always the same, doesn't matter if we're
adding or removing a container to/from its parent.
2011-01-27 13:00:14 +01:00
45227fba54
A new logic to calculate the percentages.
...
It's slower, but this way we make sure that the resulting
percentages *ALWAYS* sum up to 1.0 (or as close to that as we get
with double math).
2011-01-27 13:00:14 +01:00
a93f4643ec
Only fix the percentages after we insert the container.
...
This is what floating.c does and it allows us to unify the logic that
calculates those percentages.
2011-01-27 13:00:14 +01:00
89917976c7
Crash when we get the percentages wrong.
...
Better to crash with an assertion than to get into an infinite loop.
We cold work around this, but there's a bug here and it's not a
rounding bug, so it's better not to conceal it.
2011-01-27 13:00:14 +01:00
485555ef72
Round up as well if needed (thanks Merovius).
2011-01-23 13:21:33 +01:00
d9bfd8843f
Bugfix: fix restoring the orientation (Thanks Merovius/fernandotcl)
2011-01-21 22:58:22 +01:00
ad95d5bb1f
bugfix: you can’t unfullscreen workspaces (Thanks Merovius)
2011-01-21 22:09:04 +01:00
cbf4fcb9b5
Bugfix: Fix focus problems when switching workspaces by pushing the window stack before mapping
2011-01-21 21:49:56 +01:00
81ff1f976d
Bugfix: Don’t send fake configure notify with not yet rendered rect for floating windows
...
This fixes a bug where opening the Xpdf find dialog when Xpdf is in fullscreen
mode would crash Xpdf due to a zero-width and zero-height ConfigureNotify rect.
2011-01-21 21:01:02 +01:00
1fecbb3e5a
Bugfix: also close empty split containers when the clients are moved away (Thanks mseed)
...
Also update the testcase (which used only 'kill' before).
2011-01-20 10:09:43 +01:00
3fe4146e24
Bugfix: fix crash in tree_flatten (Thanks mseed)
2011-01-19 09:31:31 +01:00
0eb5eb34cd
When in stacking mode with only one child, respect border styles 1pixel and none (Thanks Merovius)
2011-01-17 14:38:16 +01:00
ae4331113e
re-implement xkb support for detecting keyboard layout changes
2011-01-17 14:27:49 +01:00
d6d4c962f4
Bugfix: Call mark_unmapped() on floating nodes aswell (Thanks mseed)
...
This fixes #292 .
2011-01-17 14:11:56 +01:00
92a038dd25
Save environment-variable AFTER reading the configfile
2011-01-12 10:16:11 +01:00
4caf85aa0b
Use I3SOCK-environment-variable
2011-01-12 10:15:48 +01:00
cd2ee61ee8
fix some memory leaks when user passes command line arguments twice (Thanks Tiago)
2011-01-12 10:12:24 +01:00
a6f0dcd250
Fix switching to a workspace on a different output
2011-01-08 12:03:03 +01:00
83f6e445a0
Bugfix: Don’t use ->old_parent for floating cons (Thanks eelvex)
...
Instead, we attach them to their workspace when toggling back to tiling. This
makes more sense; afterall, floating clients are always directly below a
CT_WORKSPACE container.
2011-01-08 00:44:03 +01:00
0ea15ed962
fix a problem with workspace switching when the focus got to the target workspace
...
This could explain some strange effects where workspaces would just stay blank.
We’ll see.
2011-01-08 00:38:10 +01:00
54b9549713
Bugfix: Look for cons to focus *starting* at the ws, not beneath the ws (Thanks mseed)
...
This should fix #286 .
2011-01-08 00:10:49 +01:00
e4bb6d859e
Bugfix: Correctly maintain focus when setting a workspace to floating
2011-01-08 00:10:30 +01:00
b660769fe0
Bugfix: Correctly move to other workspaces when a floating window is focused on the target ws (Thanks mseed)
2011-01-07 23:56:32 +01:00
115462f103
Implement tree flattening to automatically solve situations of redundant chains of split containers
...
This should fix the move problems. See comment of tree_flatten() for a little
example.
2011-01-07 22:21:41 +01:00
228b5c51ff
change many LOG/printf messages to use DLOG
2011-01-07 20:58:58 +01:00
186d2c7bfa
ipc: change 'orientation' to human readable string instead of raw integer value
2011-01-07 20:48:01 +01:00
5ccd7b01e7
Bugfix: fix fullscreen mode for floating windows
2011-01-07 02:50:35 +01:00
55b6d31e4a
Bugfix: randr: Don’t close container if it was not initialized before
2011-01-06 14:35:04 +01:00
2312187439
RandR: use the next unused workspace instead of fixed counting
2011-01-05 00:26:23 +01:00
f73c02ce92
Also initialize output->con when using neither RandR nor Xinerama
2011-01-05 00:19:51 +01:00
5098e45f23
Re-Implement support for RandR changes
2011-01-05 00:16:10 +01:00
f54ce1ddda
retab! randr.c
2011-01-04 22:51:42 +01:00
1fb9b7c431
Bugfix: Correctly change focus after closing floating containers (Thanks litemotiv!)
2011-01-04 22:40:05 +01:00
0416be18df
fix memleak: free struct Window members
2011-01-04 22:39:45 +01:00
bf2c18cc33
fix memleak: free X state structure
2011-01-04 22:39:24 +01:00
545566e6ba
use sstrdup() instead of strdup()
2011-01-04 22:39:13 +01:00
80ecd157f6
fix memleak: free con->name before overwriting it
2011-01-04 22:38:33 +01:00
bdbda20293
cmdparse: free strings
2011-01-04 22:37:50 +01:00
fa44383cc6
fix small memory leak (unused ->name)
2011-01-04 22:15:52 +01:00
9713419327
Bugfix: Also change focus when the killed container was focused (Thanks fernandotcl)
2011-01-02 18:08:45 +01:00
aa422c07c4
Add forgetful restart to sighandler
2010-12-31 19:36:35 +01:00
6ec468ba1e
Retab sighandler.c
2010-12-31 19:36:32 +01:00
fb6d117c42
Port sighandler to tree-branch
2010-12-31 19:36:29 +01:00
2d05c3a37d
Fix dragging floating containers / click handling
2010-12-31 01:38:17 +01:00
daf00a932f
For floating mode on workspace level, create a container around the content (Thanks Merovius)
...
Like when setting a workspace to stacked, we need to create a new container
around the content and set *that* to floating.
2010-12-30 23:09:18 +01:00
50914e0483
Bugfix: Correctly change focus when closing a split-container
...
The problem was i3 leaving an invalid focus pointer valid (after killing the
container) because the container itself is not mapped (if it has no x11 window,
for example split containers).
2010-12-30 23:01:58 +01:00
f65e4f5b16
Bugfix: Don’t redistribute resize percentage values when closing floating (!) windows (Thanks Merovius) (+testcase)
2010-12-30 02:39:14 +01:00
307c59bde6
Bugfix: Fix closing windows in tabbed mode with border_style == 1pixel / none
2010-12-28 19:54:56 +01:00
028f7d2ca7
Fix resize handling on click on borders (did not correctly use orientation)
2010-12-28 16:26:42 +01:00
d184587959
Bugfix: Don’t focus next window if the window was not mapped at the moment (on a different ws)
2010-12-28 02:27:11 +01:00
dc3c633ee4
Bugfix: store and properly load workspace order when restarting
2010-12-27 22:28:59 +01:00
c88c3e3ab2
Default to a file in /tmp for the restart state.
...
The file is now created in /tmp using the process PID and the
username of the user running i3. The restart state file is only
loaded when restarting (the --restart option is appended to the
command line prior to the restart). That means that renaming the
old state file with the ".old" extension is no longer needed.
This "--restart" switch is supposed to be only used by i3. The
"-L" switch can be used to load a layout (and not delete it
afterwards). We unlink the state file after we load it so that
we don't keep cruft in /tmp or try to restart from an old config
file if restart_state is set.
2010-12-27 13:33:03 +01:00
68f906f278
util.c is the proper place for those functions.
2010-12-27 13:28:17 +01:00
3669bcbd5f
Remove some commented out code.
2010-12-27 13:27:14 +01:00
a1dd74da5a
Implement default border styles (thanks litemotiv).
2010-12-27 13:10:45 +01:00
41eb810531
Bugfix: Don’t update focus when container is not mapped
2010-12-11 17:07:20 +01:00
8d5421e6a4
Bugfix: Invalidate focused_id to correctly focus new windows with the same ID
2010-12-11 17:03:53 +01:00
d046fa446d
Fix possible rounding errors.
2010-11-30 13:59:34 +01:00
3412e12602
xinerama.c: fix indention
2010-11-29 22:35:46 +01:00
a05b185701
xcb.c: fix indenting
2010-11-29 22:35:07 +01:00
1a40641462
workspace.{c,h}: remove obsolete code
2010-11-29 22:32:19 +01:00
5625a2f17f
log.c: fix indenting
2010-11-29 22:28:23 +01:00
38b231b848
handlers.c: remove obsolete code
2010-11-29 22:25:55 +01:00
529bdf833f
floating.c: remove obsolete code, fix indenting
2010-11-29 22:23:49 +01:00
371ec037b8
Fix click to focus.
2010-11-29 22:09:05 +01:00
b0e41cb0a2
Bugfix: Don’t attach floating clients to 'nodes' when restoring (Thanks EelVex)
2010-11-29 21:46:00 +01:00
0f0d01336b
Bugfix: Correctly attach floating Cons to a different workspace, extend testcase
2010-11-29 20:39:56 +01:00
ad825913b4
Bugfix: Fix crash when moving a floating Con to a different workspace, add testcase (Thanks EelVex)
2010-11-29 20:20:44 +01:00
b0068de3d7
Bugfix: Transfer 'percent' factor when splitting, add testcase for resizing
2010-11-29 11:24:12 +01:00
a0cd3c2bab
Include 'percent' in tree JSON, use C-locale when dumping, update testcase
2010-11-29 11:10:17 +01:00
ee45c92564
Implement resizing (still buggy)
...
Committing basic resizing functionality. We need testcases for the bugs and
then eliminate them.
2010-11-29 10:56:16 +01:00
a86d8ab329
use con_num_children()
2010-11-28 22:45:39 +01:00
85b7e60bac
Bugfix: Use separate child_mapped instead of checking state->initial (makes t/02-fullscreen.t pass)
...
This is necessary for windows which are mapped later, for example when there is
a fullscreen window in front of everything.
2010-11-28 22:09:26 +01:00
17caaf1159
Correctly update the _NET_WM_STATE hint when *not* going into fullscreen (when already in fullscreen)
2010-11-28 22:07:54 +01:00
49308d5026
Bugfix: don’t update focus when moving mouse over stacked/tabbed decorations (Thanks fernandotcl)
2010-11-28 21:07:08 +01:00
61e3415ddc
Bugfix: Add deco_height to bsr.y (to configure the floatingcon correctly). Fixes t/12-floating-resize.t
2010-11-28 20:43:35 +01:00
2dba7ec1ec
Bugfix for the last commit (broke some moving situations), update testcase
2010-11-28 20:15:47 +01:00
780b0ddbbc
look & feel: when moving, descend if the container in target direction is a split-container
2010-11-28 18:35:11 +01:00
4fcd2f6e7e
Bugfix: Fix focus when moving Cons
...
When having two v-splits on a horizontal desktop:
----------------
| t1 | t3 |
|-------|------|
| t2 | t4 |
----------------
…focus is on t2, and you move it into the right v-split (move after h), the
focus was not properly updated. That is, inside the right v-split, focus was
correct, but the workspace focus was still pointing to the left v-split.
2010-11-28 18:05:53 +01:00
4f1260ffe8
Also store/load window_rect when restarting
2010-11-28 17:20:29 +01:00
871da48b56
Bugfix: Only set to_focus when focused is actually 1
2010-11-28 17:20:16 +01:00
511cbec49b
look and feel: when moving a Con is not possible, split a workspace level
...
This allows you to open three cons, then move the last one to the right (like
in previous i3 releases).
2010-11-28 14:45:14 +01:00
81044a7104
Correctly restore focus when restarting (Thanks fernandotcl)
2010-11-28 14:27:44 +01:00
f7fff5cec1
update indenting of src/util.c
2010-11-28 14:14:34 +01:00
32cc7134aa
re-enable ipc_shutdown() when restarting
2010-11-28 14:11:44 +01:00
ab8400fff9
Bugfix: Use setsid() to avoid SIGINT for child processes
2010-11-28 14:03:43 +01:00
02b786509b
Upon ConfigureRequests, send a generated ConfigureNotify (Thanks fernandotcl)
...
This fixes problems with GVim in stacking mode for example.
2010-11-28 13:19:49 +01:00
d60e8c56dc
little style fixes, add vim modeline
2010-11-28 13:02:29 +01:00
69fc6449dc
libXcursor support (themed cursors).
2010-11-28 13:01:45 +01:00
3bab222aa7
Bugfix: Re-attach windows in correct order when switching layout (Thanks fernandotcl)
2010-11-28 01:51:16 +01:00
d0de3f403d
Bugfix: Restore focus after changing layout (Thanks fernandotcl)
2010-11-28 01:39:47 +01:00
2c157283ea
fix third argument to strncat(), use smalloc(), use strlen(".old")+1
2010-11-28 01:22:10 +01:00
0a17fe973c
Make the restart path configurable.
2010-11-28 01:18:10 +01:00
622b51a1ea
Fix switching containers by moving the mouse over their decorations when in the same container
2010-11-28 01:13:18 +01:00
6fe0e58a64
Bugfix: Also render decorations of nearby cons when getting an ExposeEvent (Thanks fernandotcl)
2010-11-28 00:52:24 +01:00
0cfebcb5b6
remove some debug messages
2010-11-27 18:05:45 +01:00
2c3e5dbc65
Bugfix: unmap windows in a separate step to avoid focus problems with fullscreen windows
...
This fixes an ugly bug with Adobe Flash in fullscreen mode, for example on
YouTube. See comments in the diff for some explanation.
2010-11-27 17:45:23 +01:00
d47a1edf22
Bugfix: configure windows before mapping, correctly store window_rect instead of rect
2010-11-27 16:44:45 +01:00
3f3fa08b15
more debug for ClientMessages
2010-11-27 16:44:32 +01:00
6431d3d187
fix indention
2010-11-27 16:44:20 +01:00
1d52bf179b
Run the autostart commands.
2010-11-26 23:30:27 +01:00
2faac65237
Always add to the focus list, fixes crash.
2010-11-26 23:26:53 +01:00
77d0d42ed2
look and feel: create split container when switching workspace layout
...
Quote from the source:
When the container type is CT_WORKSPACE, the user wants to change the
whole workspace into stacked/tabbed mode. To do this and still allow
intuitive operations (like level-up and then opening a new window), we
need to create a new split container. */
2010-11-26 23:08:12 +01:00
c3981e12d3
Bugfix: use bufcopy instead of buf (Thanks fernando)
2010-11-26 22:38:05 +01:00
65bd71b213
remove some obsolete code
2010-11-26 22:15:09 +01:00
b2db9ac797
Bugfix: always reset state->initial to false, not only for different stacking order
...
As initial may be set to true again after initializing the window, we need to
ensure that it is properly cleared. Otherwise, this leads to ghost windows when
unmapping (such as the Xpdf about dialog) due to i3 issuing MapWindow after an
Unmap happened but before i3 actually received/handled the UnmapNotify.
2010-11-26 20:15:08 +01:00
97bc8f4b86
Bugfix: Don’t draw decorations of CT_FLOATING_CONs
2010-11-26 19:24:14 +01:00
db3002fce0
Implement click on stack/tab decoration to focus
2010-11-26 18:57:15 +01:00
df7788386d
re-indent click function
2010-11-26 18:48:27 +01:00
962fe075b9
Bugfix: Upon ExposEvents, redraw decoration also for the window itself
...
In the meantime, windows can have decorations (borders) on their own frame, too.
2010-11-26 18:37:34 +01:00
e744b48b30
Bugfix: When handling an EnterNotify for a child window, access the correct con->layout
2010-11-26 18:18:40 +01:00
4d7c24b92c
Bugfix: Correctly count variables when parsing the configfile (Thanks dbp)
2010-11-26 11:25:51 +01:00
1de97a1f1f
correctly sort numbered workspaces (+testcase)
...
Numbered workspaces (workspaces with a name containing only digits) will be
inserted in the correct order now. Named workspaces are always sorted after
numbered workspaces and in the order of creation.
2010-11-21 23:35:49 +01:00
fab8b84db7
ipc: fix current_workspace
2010-11-21 22:12:34 +01:00
a71d782da9
fix indention of src/ipc.c
2010-11-21 22:03:55 +01:00
ae22fe065f
Send change:empty too.
2010-11-21 21:36:33 +01:00
e2517bd48c
Unlink the resolved path.
2010-11-21 21:36:30 +01:00
767dcea7ba
Send the workspace focus change event.
2010-11-21 21:36:28 +01:00
5d830e7a27
Ported over some message types from -next.
2010-11-21 21:36:19 +01:00
2d280469af
Bugfix: Don’t draw borders for fullscreen windows
2010-11-21 17:00:10 +01:00
09b5b17830
Bugfix: Don’t attach tiling containers to floating containers
...
This bug happened when there were only floating containers on a workspace and a
new tiling window was to be opened.
2010-11-21 16:49:59 +01:00
f53fafe100
ipc: s/floating-nodes/floating_nodes for consistency
2010-11-21 16:34:45 +01:00
39fa1d724a
bugfix: don’t treat workspace as empty if they only have floating windows (+testcase)
2010-11-20 20:16:15 +01:00
db651679c5
Bugfix: Properly ignore UnmapNotify events (especially for floating windows)
...
This fixes the bug which caused floating windows to be visible even when
switching to a different workspace.
Instead of ignoring a specific sequence, we now set an ignore_unmap counter for
each container. (So, should containers be closed too early or stay open even if
they should be closed, we probably need to have a closer look at the counter.
At the moment, it is increased by one on reparenting and unmapping (for
workspace changes) and decremented by one on each UnmapNotify event).
This system is better because a sequence does not describe a single unmap or
reparent request but a request to X11 on the network layer -- which can contain
multiple requests.
2010-11-20 19:11:43 +01:00
131a2f8765
debugging: implement a NOP command which just spits out its argument
...
You can use this in testcases to mark specific sections:
$i3->command('nop before trying to crash')->recv;
leads to the following output in the i3 logfile:
-------------------------------------------------
NOP: before trying to crash
-------------------------------------------------
2010-11-20 18:40:25 +01:00
576de246d8
Bugfix: when no windows to focus, return the workspace instead of NULL
2010-11-20 18:38:24 +01:00
5ebb3b4832
Port the IPC socket creation code from -next.
2010-11-15 14:00:48 +01:00
bfa12a5819
Port the path resolution and config loading code from -next.
2010-11-15 14:00:46 +01:00
c0c7d04264
When in tabbed mode, nail the orientation to horizontal
...
This is intuitive for the user as he can use the left/right keys to switch.
Also, we need to nail the orientation because you can be in either vertical or
horizontal mode when you enter the tabbed layout (like with the stacking
layout).
2010-11-15 13:55:10 +01:00
8048cb2e12
Render the tabbed mode correctly.
2010-11-15 12:27:16 +01:00
ea1e9b20be
Get rid of the remaining hardcoded height.
2010-11-15 12:25:06 +01:00
69f29b2b8e
Use the configured font to draw the decorations.
2010-11-15 12:24:16 +01:00
cbd53e8a7f
bugfix: check if the client leader is a managed window (Thanks fernandotcl)
2010-11-14 23:55:53 +01:00
76c07900c2
take into account x11 border_width settings (fixes uxterm border issue)
2010-11-14 23:44:13 +01:00
39b378b0a4
don’t allow useless splits, change orientation of existing split container instead
2010-11-14 23:18:39 +01:00
e8b5a802e2
Bugfix: only set clients to floating which have a leader that is not their own window (Thanks fernandotcl)
2010-11-14 22:49:05 +01:00
a27af52706
fix floating focus behaviour, extend testcase
2010-11-14 22:35:44 +01:00
d401703135
Bugfix: use rectangles instead of a polygon to avoid strange rendering errors
...
With the polygon, when using pidgin, having the buddy list in the middle of the
screen, 200 px width, full screen high, then opening the manage accounts
window, the decorations of the buddy list were visible on the accounts window.
2010-11-14 21:17:27 +01:00
33eb00d6ae
automatically set windows with client_leader to floating
2010-11-14 20:15:51 +01:00
055bd18142
Bugfix: after the first UnmapNotify, unignore the event
2010-11-14 20:15:12 +01:00
d760a1c7b2
Bugfix: don’t kill parent when currently in tree_close() for a child of this parent
2010-11-14 20:14:09 +01:00
f0efb3737e
don’t remove floating container twice (it’s already removed in con_detach)
2010-11-14 20:11:46 +01:00
5d7344af8a
resize/unmap container x11 windows on demand (makes background images visible again)
2010-11-14 18:52:40 +01:00
945632ddcb
Implement setting the WM_NAME of i3 container windows for debugging
2010-11-14 16:41:46 +01:00
e85bb09017
set withdrawn/normal state when unmapping/mapping (for xprop/java)
2010-11-14 13:53:47 +01:00
a415d56048
parser: return a proper JSON reply on parse errors
2010-11-14 01:45:05 +01:00
7c6f2dbfc6
Rendering fixes for stacking mode
2010-11-13 22:39:59 +01:00
4cd6dd0303
port fernando’s custom background color patch
2010-11-13 20:07:49 +01:00
53b98fdc7e
Paint the window decorations using the theme.
2010-11-13 19:17:08 +01:00
dc10c67060
Bugfix: Close containers which are empty due to a move (Thanks fernando)
2010-11-13 14:55:11 +01:00
432073dbe5
implement support for WM_TRANSIENT_FOR, expand testcase
2010-11-13 01:19:21 +01:00
ad9be5402a
Implement support for WM_CLIENT_LEADER
2010-11-12 23:46:03 +01:00
1bb6906c56
Fix build on freebsd (uint32_t unknown if stdint.h not
...
included)
2010-11-12 23:11:36 +01:00
8f7bd538d8
implement configure requests, adapt testcase
...
testcase does not pass 100% due to clients not being reparented correctly yet.
2010-11-12 21:41:10 +01:00
0723876429
only re-position floating clients mapped to (0, 0), add pixels for decoration
2010-11-12 20:55:43 +01:00
57e602a97c
respect position in geometry of floating windows
2010-11-12 20:55:26 +01:00
e07fee4472
parser: don’t exit(1) on invalid command, use better error message
2010-11-12 20:22:55 +01:00
0e264cb5c4
implement different border styles
...
Wow, that actually was easy :).
2010-11-12 19:37:43 +01:00
66dc8883fd
make borders around every container configurable for debugging
2010-11-12 19:37:32 +01:00
d248f35267
include border style in ipc tree dump
2010-11-12 19:16:38 +01:00
ea4e3e7682
parser: bugfix: initialize match when parsing new command
2010-11-12 19:07:48 +01:00
6eb7f2a01d
lexer/parser: implement 'border' command
2010-11-12 18:41:54 +01:00
c6c084faa5
don’t close workspaces which are still visible (multi-monitor)
2010-11-12 17:34:13 +01:00
c1d574f84e
enumerate workspaces when initializing outputs
2010-11-12 17:33:59 +01:00
5c2758af26
Implement support for size hints (including test case)
2010-10-11 21:32:29 +02:00
0925e8b7dc
Implement sticky windows
...
The implementation works like this:
Containers can have a 'sticky-group' attribute. Imagine two different
containers (on two different workspaces) which have the same sticky-group.
Now you open a window in the first container. When you switch to the
other workspace, the window will be re-assigned to the other container.
An obvious problem which is not covered with the code at the moment is
having two containers with the same sticky-group visible at the same time.
2010-09-01 18:11:01 +02:00
4d12e18571
remove proof-of-concept code in main.c
2010-08-21 18:36:51 +02:00
8159ffaa06
Bugfix for the kill command (used a.o. in test 18). Call to match_init is to be used i.o. a simple memset() to zero. Otherwise the boolean dock field doesn't get initalized to -1.
2010-08-21 18:28:37 +02:00
ebe878d24c
Indent clean up.
2010-08-21 18:27:12 +02:00
160c12ed9a
recognize dock windows (and support matching them)
2010-08-15 12:18:27 +02:00
d066341261
ipc/parser: commands can now return custom JSON replies
...
Also, finally add include/cmdparse.h
2010-07-17 15:15:37 +02:00
189635a5dc
Bugfix: Even when not going one level up, we need to travel down the whole focus stack
2010-07-17 15:08:22 +02:00
099df7f438
Bugfix: Keep focus on the current workspace when moving containers, add testcase
2010-07-17 13:27:34 +02:00
49add4f3e4
Bugfix: Don’t go further when switching focus on a CT_WORKSPACE
2010-07-17 01:56:16 +02:00
69e5c0f6ce
Treat stacking containers as if they are in vertical orientation, add testcase
2010-07-17 01:27:47 +02:00
09c6b587d3
close empty parent containers, add testcase
2010-07-17 00:54:47 +02:00
33572b8c4b
s/con->parent/parent to make it more readable
...
(and necessary for the next commit)
2010-07-17 00:54:03 +02:00
7415f14448
Add more documentation to functions/header files
2010-07-13 11:35:05 +02:00
60bdf87862
Bugfix: Push all following window stacking orders to X11 when the order of a single pair changed
2010-07-11 23:41:02 +02:00
1459ae6bf2
Bugfix: raise fullscreen containers before rendering their content
2010-07-11 23:40:50 +02:00
a79d33fc7f
Remove some dead code (to be re-implemented), rename nc.c to main.c
2010-07-11 22:12:25 +02:00
61f9a79347
use decimal coordinates in debug message
2010-07-11 22:01:25 +02:00
1a0fcea48e
ipc: add member 'focused' to every container
2010-07-04 22:17:18 +02:00
66480d3725
Bugfix: Don’t try to focus the container itself when closing
2010-07-04 22:16:54 +02:00
b186446fb7
Bugfix: Correctly restore focus after close (and add testcase)
2010-07-04 19:50:44 +02:00
49ed703299
Bugfix: Insert new containers at the right position (and add testcase)
2010-07-03 17:42:36 +02:00
64306e813e
Bugfix: Ignore sequences of mapping/unmapping windows to avoid getting enter_notifies
2010-07-02 20:33:26 +02:00
5d0f17d53d
bugfix: correctly focus follow up window when closing floating windows
2010-06-30 22:37:57 +02:00
6d152103f5
parser: implement move
2010-06-30 22:23:32 +02:00
565ef78b12
parser: implement resize command
2010-06-30 19:47:23 +02:00
bd9e5c0bc4
parser: implement explicit "mode floating"/"mode tiling"
2010-06-30 15:54:34 +02:00
2da4173144
parser: implement "reload"
2010-06-30 15:31:29 +02:00
ea30fdc327
parser: call tree_close_con() instead of tree_close() when run interactively
2010-06-30 15:27:18 +02:00
4eace6f886
Go down the tree when moving windows, add testcase for moving
2010-06-29 19:05:31 +02:00
948378fa55
floating: correctly kill floating containers when closing
2010-06-28 22:37:35 +02:00
2f4210d3cf
floating: use con_fix_percent
2010-06-28 22:36:08 +02:00
574e6b51d1
re-implement click to focus
2010-06-28 22:26:23 +02:00
c33d352fd2
floating: re-implement floating_modifier + left/right mouse button to drag/resize
2010-06-28 22:23:32 +02:00
84e78c6dba
automatically set dialog windows to floating
2010-06-28 21:40:36 +02:00
69e1975e29
split up toggle_floating_mode into floating_enable and floating_disable
2010-06-28 21:40:17 +02:00
6897e15e72
Implement mark/goto, modify testcase
2010-06-02 23:32:05 +02:00
780e773a6a
split containers do not directly accepts windows (they only have children)
2010-06-02 22:35:37 +02:00
5bff638ea0
bugfix: the layout command needs to change the layout of the parent container
2010-06-02 18:58:52 +02:00
32be3af109
Re-implement support for the urgency hint, extend t/13-urgent.t
...
The actual rendering will follow
2010-06-02 17:55:10 +02:00
7c3e88ad93
parser: implement matching on the window id
2010-06-02 17:20:32 +02:00
14a312c152
more debug output
2010-06-02 17:04:26 +02:00
1c5adc6c35
Don’t ignore sequence in UnmapNotify, there might be multiple windows in one sequence
...
This would lead to i3 thinking that a new window was already managed if it
has the same X-ID as the old window. Instead, we need to fix the EnterNotify
problem in a different way.
2010-06-02 17:03:26 +02:00
a7d2c5942a
Clear event mask while reparenting
...
This way, we can avoid to ignore UnmapNotify events generated by reparenting.
It is generally considerable to have as little ignored events as possible
due to side-effects.
2010-06-02 17:02:10 +02:00
cea8f91e18
parser: implement 'layout'
2010-06-01 23:20:57 +02:00
b467242d69
Make splitting a container which was already split a noop
2010-06-01 22:45:18 +02:00
0ce62a755e
"Re-parent" floating clients whose old_parent is being closed (makes t/27 pass)
2010-06-01 21:36:02 +02:00
712605e69f
ipc: include floating-nodes in tree reply
2010-06-01 20:50:23 +02:00
a25dc3e988
Implement focus command (and extend t/21-next-prev.t to test it)
2010-06-01 18:49:43 +02:00
67a6bd5589
bugfix: allocate one more zero-byte to definitely get a zero-terminated string
2010-06-01 18:46:14 +02:00
935b8e05ff
Implement correct removal of floating containers
2010-05-31 23:16:20 +02:00
b14fa457e7
fix: to always abort we need to assert(false)
2010-05-31 23:08:16 +02:00
143622d2d7
Reposition floating windows while dragging
2010-05-31 23:01:08 +02:00
246d4627be
re-enable sending fake configure notifies
2010-05-31 23:00:36 +02:00
71e0e49c0e
Implement mode toggle
2010-05-31 22:48:28 +02:00
e67c712f31
cleanup: introduce CT_WORKSPACE as type to avoid having to check parent->type
2010-05-31 00:11:11 +02:00
a45dc6b3ad
Update _NET_WM_STATE after fullscreen state changes
2010-05-26 23:21:37 +02:00
be357a1aaa
Set up _NET_WM_SUPPORTED and window manager name again
...
This fixes MPlayer fullscreen mode
2010-05-15 00:28:10 +02:00
2d52ecf071
Add parameter to reparent windows instead of killing them when closing a container
...
Necessary because when windows are unmapped, they are not necessary to
be killed (an application can unmap it temporarily).
2010-05-15 00:16:59 +02:00
def41582d1
re-render the three after calling parse_cmd
2010-05-14 23:41:17 +02:00
8c5d824fa8
Ignore UnmapNotify events generated by reparenting
2010-05-14 23:37:56 +02:00
7adf921bc3
use the new parser for handling keybindings
2010-05-11 23:04:47 +02:00
5eae706427
grammar: s/layout_mode/window_mode
2010-05-11 23:04:21 +02:00
c75a6732bf
Implement 'restore' in new parser
2010-05-11 23:00:31 +02:00
a0e33c1d68
implement 'move' command in the new parser
2010-05-11 22:46:49 +02:00
98dbe63e35
Implement exec, exit, level, restart (without testcases for now)
2010-05-10 10:12:35 +02:00
6a1c34d2c5
Implement 'split'
2010-05-10 09:33:10 +02:00
145ebc7584
Implement 'prev', extend testcase
2010-05-10 09:08:31 +02:00
d8307f4b4a
implement 'next' in the new command parser (testcase unfinished)
2010-05-10 00:06:24 +02:00
f10a3d9b75
bugfix: really return focus list in IPC tree dump (instead of nodes list)
2010-05-10 00:00:43 +02:00
09523f36f5
also re-render the tree for commands using the new parser
2010-05-09 23:24:03 +02:00
65e9036837
bugfix: don’t clean up workspace when switching to the same workspace
2010-05-09 23:20:49 +02:00
0ea85c1b9d
implement 'fullscreen' command
2010-04-17 19:29:44 +02:00
b0f47b25a0
throw out some old code from manage.c, cleanups
2010-04-17 18:26:46 +02:00
7f3a77ac6a
loglevel bitmasks needs to be larger because we got more than 32 files
2010-04-17 17:46:11 +02:00
b93413ca49
remove old fullscreen code
2010-04-17 17:43:50 +02:00
6bf55dc356
implement con_toggle_fullscreen
2010-04-17 17:40:41 +02:00
c4d87e2f81
handle destroynotify events
2010-04-17 17:27:53 +02:00
d973f30fc2
push X11 changes after a window is mapped
2010-04-17 16:43:34 +02:00
68542f3c22
When assigning children to containers, reset their x window state
2010-04-17 16:41:20 +02:00
53dcebfd8a
put container in fullscreen mode if the fullscreen state is set when mapping
2010-04-17 14:21:34 +02:00
c56867792a
handle client messages (fullscreen window state)
2010-04-17 13:54:45 +02:00
22f38ebde4
clear current_match when dropping state
2010-04-17 12:57:06 +02:00
77ec4219c9
make floating an enum (we need three states, not only two)
2010-04-16 22:57:21 +02:00
8d05039b04
move match_* to match.c
2010-04-16 22:51:25 +02:00
bb220b27d7
check for empty matches
2010-04-16 22:50:20 +02:00
e0b7ae872e
move con_focus to con.c
2010-04-16 21:04:36 +02:00
4796798074
better debug messages
2010-04-16 21:02:34 +02:00
138a790cd0
clean up old workspace when switching (makes test 2 of t/16-*.t pass)
2010-04-16 20:59:21 +02:00
2534f21940
ignore sequence of unmapnotify events (generates enternotify events)
2010-04-16 20:56:49 +02:00
93600ce0fd
implement con_id for matching containers, extend testcase
2010-04-16 15:30:07 +02:00
769501420d
add first version of a new flex/bison based command parser
2010-04-14 20:26:56 +02:00
24725cd94a
re-add fullscreen mode
2010-04-13 20:51:43 +02:00
8959c5005f
cleanups
2010-04-13 19:33:40 +02:00
8e5a831e27
re-add focus follows mouse handling
2010-04-13 18:43:37 +02:00
eec762ea8f
more reformatting/cleanups
2010-04-13 17:52:23 +02:00
dd7acf73e9
re-add support for legacy window titles (WM_NAME)
2010-04-13 17:46:54 +02:00
fd8735a6fd
correctly update/display window title/class
2010-04-13 17:22:34 +02:00
bcfb0d2505
more reformatting
2010-04-13 16:48:42 +02:00
4206db2839
workspace.c: update header, reformat
2010-04-13 16:43:08 +02:00
6aa6fa0af0
correctly focus workspaces
2010-04-13 16:41:23 +02:00
c145f7e529
first step of the big refactoring ("tree" branch).
...
From here on, we can track changes. It made no sense to put the
development up to this point into git.
2010-04-13 13:17:39 +02:00
41b6631f68
Bugfix: null-terminate buffer
2010-03-26 03:04:54 +01:00
a542515f9e
Fix memory leaks
2010-03-26 01:52:39 +01:00
7bd4ea3699
randr: Don’t enable outputs with mode 0x0
...
Just a sanity check for some possibly broken drivers.
2010-03-26 01:52:08 +01:00
a151fd95a8
remove newlines
2010-03-26 00:28:30 +01:00
6fd56757f0
Bugfix: Assign all workspace to new outputs as new outputs get available (Thanks badboy)
2010-03-26 00:13:28 +01:00
1b8299002e
Bugfix: Translate keysyms to keycodes before entering mode (Thanks fallen)
2010-03-25 21:18:46 +01:00
6699d54640
Fix rendering of workspace names after "reload" (Thanks fallen)
2010-03-25 19:08:37 +01:00
469f22caeb
Bugfix: Correctly switch workspace when using the "jump" command (Thanks fallen)
2010-03-25 18:07:40 +01:00
2c42c0c760
Bugfix: Correctly check bitmask for floating_modifier
2010-03-25 02:53:53 +01:00
46e7cf5fe1
Handle destroy notify events like unmap notify events
...
This helps for windows which are immediately destroyed instead of
unmapped, like when starting i3status | ./foobar | dzen2 -dock
and foobar does not exist (i3status and dzen2 will get a SIGPIPE).
2010-03-24 16:52:16 +01:00
e90e80c87d
Bugfix: fix state of keypresses in sighandler (like in i3-input)
2010-03-24 16:10:47 +01:00
7eea1067f8
Bugfix: correctly translate coordinates for floating windows when outputs change
2010-03-24 16:09:43 +01:00
0f7ac09c7b
Bugfix: Don’t unmap windows when current workspace gets reassigned
...
Steps to reproduce were:
1) xrandr --output VGA1 --auto --left-of LVDS1
2) open a terminal on VGA1
3) xrandr --output VGA1 --off
2010-03-24 16:06:21 +01:00
56139f3656
Bugfix: only restore focus if the workspace is focused, not if it is visible
2010-03-23 14:43:35 +01:00
42b638eac0
Bugfix: Don’t enter BIND_A2WS_COND state too early (Thanks fallen)
2010-03-22 15:12:37 +01:00
77efb29d9f
ipc: send a workspace event when the urgency flag changes
2010-03-20 03:09:42 +01:00
35a791f7e6
ipc: also send workspace event when initializing a workspace for an output
2010-03-20 02:56:23 +01:00
46bd9ac58a
Bugfix: correctly re-assign dock clients when output goes inactive
2010-03-20 02:52:06 +01:00
aec40126b4
ipc: implement output event
2010-03-19 22:40:43 +01:00
4ce0d6f014
ipc: implement GET_OUTPUTS
2010-03-19 22:24:52 +01:00
a607eae53a
ipc: include the urgent flag in the workspaces reply
2010-03-19 22:01:21 +01:00
fdcbec248a
Start dock clients on the output they request to be started on according to their geometry
...
Use dzen2’s -xs option to use this, or specify the coordinates using
-x manually.
2010-03-19 21:44:36 +01:00
3c8c426011
Disable RandR if no outputs are found (Thanks fallen)
2010-03-19 18:51:19 +01:00
ee76b2ebf6
Bugfix: When disabling RandR/Xinerama, give a name to the pseudo-output (Thanks fallen)
2010-03-19 18:51:01 +01:00
af00df9321
Use DLOG for debug messages instead of printf (Thanks kruM)
2010-03-19 18:48:36 +01:00
0bb1b718d1
Fix compilation with the old xcb keysyms api
2010-03-19 16:02:33 +01:00
91b6c69eae
little style fix for the last commit
2010-03-19 01:43:11 +01:00
62c4532329
Bugfix: Take window out of fullscreen before entering floating mode.
2010-03-19 01:24:33 +01:00
1680071555
randr: use effective CRTC width/height, not its mode (Thanks moemoe)
...
This fixes setups which use panning and cloning.
2010-03-17 15:56:26 +01:00
a604af6340
make pointer follow the focus when moving to a different screen also for floating windows
2010-03-17 03:18:13 +01:00
b47d0a8932
Bugfix: configure floating windows above tiling windows when moving them to another workspaces (Thanks Sasha)
2010-03-17 00:36:08 +01:00
f7a1a9fb20
ipc: correctly shutdown IPC sockets when exiting/restarting
2010-03-16 02:44:47 +01:00
f9e6f8ba4b
Bugfix: Correctly stack windows when new windows are opened while in fullscreen mode
...
This fixes ticket #195 .
2010-03-15 22:17:00 +01:00
c738b2e454
Don’t use SYNC key bindings for Mode_switch but re-grab keys
...
Before this commit, i3 used key bindings in SYNC mode for bindings
like Mode_switch + <a> and replayed the key if the current state
did not include Mode_switch. This had some problems:
1) The WM needed to acknowledge much more key presses than you
actually had bindings for, thus making the system a bit laggy
sometimes.
2) Users of layouts who constantly type in the third level (like
russian layouts) did not get their cyrillic symbols correctly
(they were not replayed right), neither did the keybindings
work in both modes.
So, the current implementation uses the following approach: XKB
provides an event which contains the current state (including
the current level). i3 signs up for this event and upon receival,
it re-maps the bindings using Mode_switch (enables them when the
level goes to the third level and disables them as soon as the
level goes back to normal). This fixes both problems.
2010-03-14 22:40:58 +01:00
2df1fb8ac8
Implement disabling the internal workspace bar
2010-03-14 12:59:45 +01:00
2df374ca4c
Add configuration option to turn off workspace bar
2010-03-13 19:15:28 +01:00
b6088b803e
ipc: correctly set "focused" for workspaces
...
Didn’t work on empty workspaces before
2010-03-13 16:27:03 +01:00
9cb35383a8
Implement proportional floating-resize.
2010-03-13 13:22:39 +01:00
3db4890683
ipc: implement events, cleanup the code a bit
2010-03-12 21:05:05 +01:00
d86531b958
ipc: return logical workspace numbers, not internal ones
2010-03-12 15:59:38 +01:00
d6f726283c
ipc: also send a reply for COMMAND messages
2010-03-12 15:29:44 +01:00
5a3d1b38e8
ipc: Correctly deal with SIGPIPE/failing write()s
...
If a client disconnects while i3 still wants to write the reply, this
could lead to exits of i3 before.
2010-03-12 15:02:00 +01:00
0f5256dc72
Floating resize uses arbitrary corners
...
This closes ticket #121
2010-03-12 03:11:20 +01:00
9ed5e00107
ipc: change active to visible, introduce focused
...
visible == currently visible on the output it is on
(multiple workspaces can be visible at the same time)
focused == has the focus (only one workspace can be focused)
2010-03-12 03:01:34 +01:00
7c1be83692
Update comment (Thanks Merovius)
2010-03-12 02:59:16 +01:00
5f370b494c
bugfix: don’t remap stack windows errnously when changing workspaces
...
This fixes ticket #193 (long-standing rendering bug).
2010-03-12 00:41:40 +01:00
93a9f3c244
Bugfix: Don’t mess up x/y coordinates in configurerequests for floating windows
...
This was the cause for ticket #93 , which actually has a false
conclusion for the reason of this bug.
This code needs to be refactored.
2010-03-11 23:34:29 +01:00
e11ca75407
ipc: add active flag
2010-03-11 16:48:48 +01:00
9a9ba1b859
ipc: implement GET_WORKSPACES message type
...
This is the foundation to use dzen2 or similar as a complete
replacement for the internal workspaces bar.
A testcase is included, more documentation about the IPC interface
will follow.
2010-03-11 15:58:39 +01:00
f7c8e76782
Select containers above or near the whole snapped width/height
...
This fixes ticket #100 , and is best explained using a little example.
Consider the following layout:
+---+---+
| | X |
+---+---+
| X |
+---+---+
Where X marks a window, so you have an empty container in the upper
left, the container on the bottom is snapped to the right. Before
this commit, nothing would happen when focusing "above". After
this commit, the upper window gets focused.
2010-03-11 00:15:34 +01:00
a70f4353b7
Fix predict_text_width by using xcb_query_text_extents
...
This fixes ticket #173 , at least for the rendering errors.
I don’t really know why I implemented predict_text_width like it
was before (querying the whole table and pulling out information
one by one). Maybe I have overlooked xcb_query_text_extents. In
any case, it works better now.
2010-03-10 23:27:24 +01:00
bd76e994b8
Re-add old Xinerama code for the poor nvidia users
...
Add --force-xinerama when starting i3 to use Xinerama instead of RandR.
This should *ONLY* be done if you have no other choice (nvidia’s
binary driver uses twinview and does not expose the monitor information
through RandR).
2010-03-09 21:25:54 +01:00
4dfe61c2d4
Fixes for the last commit: check outputs instead of workspaces, correctly reset state when switching workspaces, little style fixes
2010-03-08 11:15:31 +01:00
9c77b0f9a1
Implement screen-spanning fullscreen-mode (command: 'fg')
...
This closes ticket #188
2010-03-08 11:15:31 +01:00
85308715ea
Turn nested functions into real functions or macros
...
This enables compilation with llvm-clang and thus closes ticket #101 .
While it makes the code more ugly, I don’t see a beautiful solution
which would enable us to stay with the more elegant solution of
nested functions and still allow compilation with any other compiler
than gcc.
2010-03-07 19:00:34 +01:00
46642d0e45
For num_clients == 0, the last fix is also valid
2010-03-06 16:58:20 +01:00
afc922ef57
Avoid more errors by not trying to re-create a stack win with height == 0
2010-03-06 16:51:17 +01:00
e9ef672c36
Don’t render if no stack_window has been opened
...
This could happen when you have only one client in a stacking/tabbed
container. While not being a critical bug, this avoids X errors.
2010-03-06 16:34:07 +01:00
6be76e4c56
Remove trailing whitespace
2010-03-05 23:26:45 +01:00
4e9c6515f3
Changing to stacking/tabbing toggles mode to default if already in stacking/tiling.
2010-03-05 23:25:34 +01:00
f1a011c014
Clear urgency hints set by i3 (see HEAD~2)
2010-03-05 20:03:38 +01:00
c367eaa369
put windows with WM_CLIENT_LEADER on the workspace of their leader
...
This fixes ticket #163
2010-03-05 18:01:32 +01:00
40475b250f
Allow unsetting WM_CLIENT_LEADER (XCB_NONE is not an invalid value)
2010-03-05 17:42:50 +01:00
8d648b4e37
Update function names, variable names and documentation for the RandR changes
2010-03-05 16:18:41 +01:00
8b192ac7ed
Bugfix: Correctly hide/show workspaces when enabling new outputs, correctly handle focus (Thanks Merovius)
2010-03-05 15:22:12 +01:00
718d62a3cd
Bugfix: Fix clone mode with new RandR code (Thanks Merovius)
2010-03-05 14:32:48 +01:00
d73f1748db
Remove superfluous definitions (Thanks Merovius)
2010-03-05 01:59:52 +01:00
85437877e8
fix comment (Thanks Merovius)
2010-03-05 00:09:52 +01:00
3cfe1b35e0
Update fullscreen client position/size when an output changes (Thanks Merovius)
...
This fixes #187 .
2010-03-03 09:32:31 +01:00
0ec3481c69
draw consistent borders for each frame in a tabbed/stacked container
...
The condition was a relict from older rendering code, I think.
This fixes #172 .
2010-03-03 08:49:07 +01:00
187c72fa96
sighandler: only display on active outputs
2010-03-03 08:48:57 +01:00
e5f222e03e
Save a resize_client() when handling the size hints
2010-03-03 01:23:38 +01:00
7839b7a4fe
Bugfix: checked for wrong flag in size hints
2010-03-03 01:23:38 +01:00
5dbcb0158f
When in fullscreen mode, focus whole screens instead of denying to focus (Thanks dothebart)
...
This fixes ticket #169 .
2010-03-02 15:45:48 +01:00
e3e7ebe23a
Bugfix: only return active screens in get_screen_most
2010-03-02 15:45:03 +01:00
4e69bd65c0
Move autostart after creating the IPC socket in start process (Thanks Sasha)
...
This fixes ticket #179 .
2010-03-02 15:30:23 +01:00
b53c5861a2
Restore geometry of all windows before exiting/restarting (Thanks Sasha)
...
This fixes ticket #185
2010-03-02 15:25:08 +01:00
d08ec00329
use scalloc instead of some places where calloc was still used
2010-03-02 14:42:24 +01:00
aae824b1f3
Change workspace assignments to use the RandR output name instead of <screen>
2010-03-02 13:35:43 +01:00
818e02ef35
huge change: implement RandR instead of Xinerama
...
Thanks to Merovius for doing a proof of concept on this one and
being a driving force behind the idea.
Using RandR instead of Xinerama means that we are now able to use
the full potential of the modern way of configuring screens. That
means, i3 now has an idea of the outputs your graphic driver
provides, which allowed us to get rid of the ugly way of detecting
changes in the screen configuration which we used before. Now, your
workspaces should not be confused when changing output modes anymore.
Also, instead of having ugly heuristics to assign your workspaces
to (the screen at position X or the second screen in the list of
screens) you will be able to just specify an output name.
As this change basically touches everything, you should be prepared
for bugs. Please test and report them!
2010-03-02 12:47:21 +01:00
6f72970ece
add xcb_set_window_rect which configures a window according to a Rect
2010-02-28 20:35:30 +01:00
7caf98dd18
Move update_if_necessary to util.c, will be necessary later
2010-02-28 18:39:11 +01:00
e209fd7d3a
docs: the comparison is size and position, not only size (Thanks Merovius)
2010-02-22 07:09:17 +01:00
4fcbb7980e
work around clients setting 0xFFFF as resize increments
...
I am not sure if behaviour is specified for this case, but as the
workaround is not really a big deal, why bother…
2010-02-20 20:32:43 +01:00
432f06a21e
Add missing carriage return (Thanks fallen)
2010-02-16 19:55:04 +01:00
e225742415
Make the warning about $terminal being deprecated an error (Thanks fallen)
2010-02-16 19:25:07 +01:00
e78bb02082
parser: ignore errors
2010-02-14 16:59:22 +01:00
2af2bc36c9
Document the new options
2010-02-13 19:58:43 +01:00
64cf88403d
lexer/parser: proper error messages
...
Error messages now look like this:
13.02.2010 19:42:30 - ERROR:
13.02.2010 19:42:30 - ERROR: CONFIG: syntax error, unexpected <word>,
expecting default/stacking/tabbed or stack-limit
13.02.2010 19:42:30 - ERROR: CONFIG: in file "inv", line 15:
13.02.2010 19:42:30 - ERROR: CONFIG: new_container foobar
13.02.2010 19:42:30 - ERROR: CONFIG: ^^^^^^
13.02.2010 19:42:30 - ERROR:
2010-02-13 19:42:54 +01:00
79a4e30488
parser: enable verbose error messages, add aliases to tokens
2010-02-13 15:27:43 +01:00
e446747812
Also warp the pointer when moving a window to a another visible workspace (Thanks Thomas)
2010-02-12 16:19:58 +01:00
87f8c501da
Bugfix: Correctly do boundary checking/moving to other workspaces when moving floating clients via keyboard (Thanks sasha)
2010-02-12 13:06:59 +01:00
0b6b8e8380
Bugfix: Use both parts of WM_CLASS (it contains instance and class) (Thanks fallen)
...
Actually, WM_CLASS contains two null-terminated strings, so we cannot
use asprintf() to get its value but rather use strdup() to get both
of them. Both values are compared when a client is matched against
a wm_class/title combination (for assignments for example).
2010-02-12 12:12:25 +01:00
88b9700cdb
Invert logic for the last commit
...
This makes it more clear that the option is meant to be a special
case (it *disables* part of the focus handling). Also, when
initializing the config data structure with zeros, it will get
initialized with the right value.
Furthermore, the config file parser now also accepts various values
which represent "true", not only numbers.
2010-01-29 21:58:50 +01:00
7f10970fc7
Added focus_follows_mouse config option
2010-01-29 21:58:50 +01:00
36909c6e3b
Fixed cursor code in create_window(), allowing the cursor to be changed
2010-01-26 11:28:38 +01:00
148547c765
Fixed cursor orientation when resizing
2010-01-26 11:28:37 +01:00
7270b74732
Implement resize command for floating clients
2010-01-23 18:57:29 +01:00
fde11f9a5c
Bugfix: Don’t leak IPC socket to launched processes
2010-01-23 00:34:29 +01:00
c606d93630
Feature: Cycle through workspaces
...
On command pw/nw, cycle through all workspaces (starting from
previous/next one) until we reach the current one again.
2010-01-19 12:10:45 +01:00
d949a335e6
bugfix: lexer: return to INITIAL state (Thanks dirkson)
...
'floating_modifier' after 'workspace' did not work because of wrong
state
2010-01-08 18:56:01 +01:00
af0b33bcc3
Bugfix: if a font provides no per-char info for width, fall back to the default (Thanks Ciprian)
2010-01-07 14:38:00 +01:00
b6de565445
Bugfix: Use ev_loop_new instead of ev_default_loop because the latter one blocks SIGCHLD (Thanks Ciprian)
...
SIGCHLD was inherited to child processes started by i3 and not
all of them unblocked it (shells generally did, though), leading to
zombie processes.
2010-01-07 13:36:52 +01:00
44191d5ffc
sighandler: last little style fixes
2010-01-03 22:07:39 +01:00
2b1a132c39
grab the pointer inside the signal handler popup
2010-01-03 22:02:07 +01:00
be33c8e599
Check return code of sigaction()
2010-01-03 21:55:22 +01:00
a69dfb3f06
Remove expose event mask, expose events will not be generated in any case
2010-01-03 21:55:02 +01:00
7b2363776a
Use DLOG instead of LOG, remove unnecessary debug statement
2010-01-03 21:54:47 +01:00
0c35573e51
some little style changes
2010-01-03 21:54:26 +01:00
8afdf54078
Update copyright to 2010
2010-01-03 21:53:30 +01:00
614b360bd4
added popup for handling SIGSEGV or SIGFPE
...
the popup is placed on each of the virtual screens
the user can decide to restart or quit i3
in case of an exit a core-dump is generated
2010-01-03 21:32:50 +01:00
715983024d
ewmh: Don’t push workspaces with width=0 and height=0 (Thanks Atsutane, badboy)
...
Even though i3 cannot know the width/height of some workspaces as
long as they are not initialized (say you used workspace 1 and 3,
but not workspace 2), some applications require this information.
In this case, it was Firefox which intersects the available workareas
(see mozilla/gfx/src/gtk/nsScreenGtk.cpp) and did not position some
windows correctly when being confronted with zero-width/height
workspaces.
2010-01-03 18:36:50 +01:00
7c130fb540
Obey the XDG Base Directory Specification for config file paths
...
This means you can now put your i3 config into
$XDG_CONFIG_HOME/i3/config, which probably is ~/.config/i3/config
if not set otherwise.
2010-01-03 16:58:41 +01:00
ba2dd3a3eb
Bugfix: Containers could lose their snap state (Thanks Atsutane)
...
When being on a different workspace than the one where the snapped
container is, the function to cleanup cols/rows would clean up too
much.
2010-01-01 22:40:50 +01:00
092f3139d8
Remove superfluous #include <assert.h> (Thanks badboy)
2010-01-01 17:30:27 +01:00
65cae2cad1
Bugfix: Don’t put dock clients into floating mode (Thanks xeen)
2010-01-01 16:19:42 +01:00
75aac5bc02
ewmh: implement support for _NET_WORKAREA (rdesktop can use that)
...
Please note that rdesktop’s -g workarea option will not work on
64-bit systems at the moment because of a bug in rdesktop (see the
rdesktop-devel mailing list).
2009-12-31 17:48:41 +01:00
e7e9e8e49d
ewmh: correctly set _NET_ACTIVE_WINDOW
2009-12-25 15:19:39 +01:00
0641e6a1a3
ewmh: correctly set _NET_CURRENT_DESKTOP to the number of the active workspace
2009-12-25 15:05:17 +01:00
ba82a3e63b
Bugfix: Fix NULL pointer dereference in workspaces which have preferred screens but were not used yet (Thanks badboy)
2009-12-23 00:39:03 +01:00
3e53ecf69e
retab! src/container.c
2009-12-22 23:43:05 +01:00
848d9c1b01
Make containers containing exactly one window behave like default containers
...
Starting from this commit, a borderless window will always be
borderless if it is the only window in a container. For example,
you can have Firefox borderless in a tabbed container and as soon
as the download manager or a viewer gets opened, the container
will be rendered like a normal tabbed container.
This solves the user-interface dilemma of borderless/1-px-border
windows inside stacked/tabbed containers, at least for this special
case. Thanks to Merovius for this suggestion.
2009-12-22 23:40:06 +01:00
9df64a8d0a
Correctly exit when another window manager is already running
...
This is implemented by checking if setting the redirect mask returned
an error or not.
2009-12-22 11:29:24 +01:00
e900a8d23d
xinerama: correctly put windows which are assigned to a specific screen on that screen when it becomes available (Thanks badboy)
2009-12-21 22:30:08 +01:00
0b5554c762
xinerama: change some log messages to errors
2009-12-21 20:41:02 +01:00
6ef0d1fa79
Touch each log message and classify it as DLOG (debug), ELOG (error) or LOG (verbose)
2009-12-19 22:40:23 +01:00
37d795c81d
Add new options -V for verbose mode and -d <loglevel> for debug log levels
2009-12-19 22:40:23 +01:00
4226cc61de
add log.c/log.h which contain all the log related macros and functions
2009-12-19 22:40:23 +01:00
937048d47b
Distribute rest space between windows as long as possible. (Thanks msi)
...
When having 8 windows in a container which has 766 px available,
you ended up losing 0,75 px per window which would quickly sum up.
Now, the rest space (6 px in this example) is distributed in units
of one pixel to as many windows as possible.
2009-12-13 17:02:22 +01:00
f87b98e0a7
Take into account the window’s base_{width,height} when resizing (Thanks Mirko)
2009-12-12 22:27:57 +01:00
Michael Stapelberg